Creation of individual object in crm

Hi All,
Can anyone help me how to create an Individual Object in CRM.
I have created Equipment in R/3,replicated to CRM.
Now when i am trying to create Installed Base i dont find any Individual Objects on the Individual Object tab in the Installed Base screen.
I have even done the required configuration of the Individual Object.
Please help me on this issue.
Thanks,
Kalyan

Hello Everyone,
Iam trying to Download Equipments from ECC 5.0 to CRM 5.0.
Iam getting a Validation Error in the Bdoc CRM_EQ_DMBDOC.
The Error Message is <b>Assign a Base Category to the Product.</b>
I have the Base Hierarchy R3PRODSTYP Assigned to the Application
Product.
And i cannot edit the Hierarchy or Categories since they are Downloaded
from ECC.
Please let me know how to Specify a Base Hierarchy/Category for the
Equipments to get Downloaded as Individual Objects.
I should also be able to create Individual Objects Directly in CRM.
Using IB51 too i get the Same Error it says Product Category not
Avaiable for Object Family 0401.
Please Advice!!!
Thanks & Regards
Kumar

Similar Messages

Individual Object Creation

Hello,
We need to create individual object (Vehicle, in our case) in the CRM system from external system data.
The individual object is very simple and contains only basic data and referenced product without any sales, tax or unit of measure data.
As far as we search, we have only found out the IDOC CRMXIF_PORDUCT_INDOBJ_SAVE01.
1. It seems that the IDoc requires sales, tax and unit of measure data. Is it possible to create individual object without it?
Furthermore, the IDoc/FM does not contain any documentation. Is there any available documentation/example for usage?
2. Is there any other IDoc/Function module for creation of individual object?

Hi Nachson
In what way are you using IO's?
The BAdI's are (unusually) tied to the UI .
Example: definition CRM_ICWC_IOBJECT.
Do you have the relevant IO cookbook? The Best Practices documentation contains a few that are very helpful for IO coding, as nearly everyone who uses them has some specific functionality to add in.
Cheers
Dom

Replication of warranty data from Equipment in ERP to CRM Ibase at individual objects

HI All,
I have replicated Equipments from PM to Individual Objects in CRM, i am trying to get the customer warranty Start and End date updated at individual objects from equipments at Iq03,
please suggest the steps both ways possible through standard and technical.
I have created warranty products in CRM when i am trying to add warranty product manualy to the ibase at individual objects i am getting an error
Relationship type IOBWTY for source object type BUS1178 cannot be maintained
regards
Nikhil Chugh

Hi Nikhil,
Though not for the exact error message but I would advise you to check the below SAP KBA:
1899474 - Relationship type &1 for source object type &2 cannot be maintained (message number COM_IL015)
Or, you may try to debug out where the error is getting raised in the manual process of warranty addition.
/Hasan

Individual object download from r/3

Hi folks
I am trying to download equipment master as individual object in crm.
Any tips??
Itty

Hi Hun,
To restrict materials or any of the data for any of the download object,
Go to R3AC1, select the download object, go to tab Filter and set the filters
for eg.
Object: Material
You want to download materials between number 1000 and 1500
go to filter tab,
set value for following filter record
Table Field Operator Value1 Value2
MARA MATNR BT 1000 1500
To download customer object user object
Customer_Main
and to download relationships of Customer use object
Customer_rel
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Individual Object - Products

Hello,
I am looking for creating Individual Object in CRM, please let me know the transaction code and also how to associate it with the products.
Regards,
Sanju

Hi Sanju,
you can try this CRM_ICSS_CREATE_COMPONENT or check this FM inside u can get some ideas. We are using this FM, but it's important to know that the CRM_IBASE_SAVE which is included in the above mentioned FM can cause a memory consumption problems if you use e.g. in a mass upload. So we use it in a separate program and call this program via SUBMIT.
I hope this helped.
Kind Regards:
Pal

Individual object

Hi All,
iam registering the products as indivudal objects in crm icss application.
What is the transaction code to see created individual objects in CRM system.
Thanks,
Priya

Hi venkatesh,
i checked with commpro1 product transaction code.
But its not giving the results.
where as when i check from icss application on my registered products
its showing.
Thanks,
Priya

How to create Individual Object in SAP CRM

Hi Experts,
Can some one please let me know the procedure to create Individual Objects in SAP CRM. I mean I want to know the function modules or classes to create Individual Objects.
My requirement is like this: I want to create an Individual Object first and then create an Installed base and assign the Individual Object to Installed base.
I need ABAP code to do the above tasks.
Thanks in advance.
Nadh.

Could you please share your solutions?
Thanks

Procedure to create Individual Objects in SAP CRM

Hi Experts,
Can some one please let me know the procedure to create Individual Objects in SAP CRM.
My requirement is like this: I want to create an Individual Object first and then create an Installed base and assign the Individual Object to Installed base.
Regards
Narendra

Hi Narendra,
You might not be able to create an Individual object directly in CRM using the SAP GUI, but the way I know of is to use the PC-UI application CRMM_PRD_IOBJECT. So the URL would be something like:
http://<FQDN>:<port>/sap/bc/bsp/sap/crm_bsp_frame/entrypoint.do?appl=CRMM_PRD_IOBJECT
once you have created your Iobject here you can try to utilize the same in your installed base.
Hope this helps!!
Regards
Piyush
PS:Award Points if useful!!

CRM 5.0 : Assign partner to Individual Objects

Hello,
We would like to assign partners to Individual Objects without managing Installed Base.
Can you describe us the required steps to to this ?
Thanks,
J

I had 2 issues
- I didn't have the X set in SMOFPARSFA so i was doing availibility information which doesn't include scheduling (pick pack)
- other issue was timezones which required note 1423767

Business partner in Fact Sheet for Individual object

Hi Folks,
I am unable to see the assigned business partners on the Fact Sheet for an Individual object. I have created the iObject in the portal. Here, I could not assign any BP's during the creation as the system does not have this option. I then went ahead and created an Installed Base and assigned this iobject to it in the CRM system in transaction [IB51] "Create Installed Base". I then went ahead and assigned the Business Partners to this iObject.
The situation is that I can see the assigned Business Partners in the Portal for this iObject/Component for the Installed Base in the "Installed Bases/Components" tab but when i go to the "Fact Sheet for Installed Bases" tab I am unable to see the assigned BP's.
I haven't been able to find any documentation on it either. Can someone please help.
Thanks.

Hi,
Did you ever solve this issue?
I too am having the same problem and cannot display the factsheet or summary using the 'Go To' button in EP.
Any help would be much appreciated.
Regards
Jo

Product registration--- individual object- installed base

HI all,
As soon as i register the products in ICSS, it creates individual objects.
1)HOw can it be automatically added to Existing ibase of customer?
2) Or how can it be created itself automatically as Installed base.
Please give me some valuable suggestions .
Thanks,
Priya

Hi Priya,
The product registration process in ICSS is the creation of a standalone individual object. If you want to have an ibase node created please use the ibase functionality and add a node component (product or object) to an existing ibase or create a new ibase.
regards,
Riad Hijal
SAP CRM e-service product manager

Creation of sales order in CRM and replicating it to Multiple ECC system.

We have a requirement for creation of sales order in CRM and replicating it to Multiple ECC system.
We have checked the following standard Adapter objects in transaction R3AC1.
BUS_TRANS_MSG
The initial flow contexts does not support target site type as R/3(SMOF_ ERPSITE). So we are not able to replicate the sales order from CRM
to ECC.
2. SALESDOCUMENT
Here the initial flow contexts does not support flow from CRM -> R/3 as we don’t see the target site as CRM.
Please let us know if the standard sap middleware objects don’t support the sales order flow from CRM to multiple ECC or is there any
other adapter object we need to use for this.

Hey Vijay Duvvada,
I hope you are already referred below sap note and which explains scope & how to do -
1084315 - Consulting: Information about the multiple backend scenario
1763516 - How-to: Basic Setup of MEP
As explained by Rohit Sharma data should be start flowing to multiple sites.
please let me know if it does help.
Regards,
Arjun

Creation of login object failed

Hi all,
I've got a problem with the mobile client development.
We are using the mobile client for many years and we even develop a lot with it, but now i have a problem never seen.
After extending a bDoc and start testing the application, after the generation and login, system states "Creation of login object failed".
So i did a full generation. Result the same.
I debugged the ValidateLogin class and found out, that in the following statement is failing
       BOLOGIN = BusinessRootObject.BusinessFactory.LoadBusinessObject("LOGIN", determineUser)
BOLOGIN is Nothing at the end. I tried out to create the Object via        BOLOGIN = BusinessRootObject.BusinessFactory.CreateBusinessObject("LOGIN")
same result. Next i tried to create the BOACTIVITY and it failed as well. One day before everything was fine, even with changing business documents.
The error in the VB.ERR object says:
-     err     {Microsoft.VisualBasic.ErrObject}     Microsoft.VisualBasic.ErrObject
     Description     "In der Methode BusinessFactoryCore.LoadBusinessObject ist eine System-Exception aufgetreten"     String
     Erl     0     Integer
     HelpContext     0     Integer
     HelpFile     ""     String
     LastDllError     3     Integer
     Number     5     Integer
     Source     "MTBLLFW"     String
Can anybody please give a hint.
We are using CRM 5.0 SP7 and MSA SP7 on MS 2003 Server with local repository. DB is SQL2000.
Yesterday i was releasing a changelist and now its no longer working at all, what a mess.
Thanks to all,
Andreas Rose

Hi Andreas,
The problem may be incorrect or corrupt ARSREP.DAT file.
The reason may be that the BDOCs are not synched from MAS. Once you sync this through MAS you will find the *.bdoc files at the location
mentioned under the registry key HKLM\SOFTWARE\SAP\MSA\MW\TL\BDocPath
Usually this would be default as C:\Program Files\SAP\Mobile\tpsfiles.
After this when you generate the BusinessLibrary the Arsrep.dat file
will have the *.bdocs incorporated in the Arsrep.dat file.
Hope this helps.
Regards, Gervase
ps. For synching the BDocs refer to SAP Note 942942

Error while Debugging MSA 'Creation of Login Object Failed'

Dear Friends,
I am working on CRM Mobile Sales 5.0 SP 5.
I have setup my Mobile Client and Mobile Application Studion On the same machine.
I have perform the initial generation of the application from Mobile Repository server to my machine.
it gave me 6 errors and 12 warnings and took about 4 hrs for generation.
Now when i tried to debug the generated application,
i get my login screen and once I enter username and password.
Error popups up stating "Creation of login object failed".
and then another error
"Starting MPPFailed" (MPP is my project name).
Please suggest me how should i go about to debug the application solving the above errors.
Awaiting Reply,
Best Regards,
Pratik Patel

Am not sure if you were able to resolve the issue but below are some points:
a. I think the dlls sfabol and msa are not any more registerable, since they are more of VB.NET components and here assembly is registered and not the dll.
b. For logging into the application just ensure that you have user id in table SMOUSER and the employee for that user in SMOMITABT table.
c. If this is fine, then ensure that you have the latest BDOC metadata information on your laptop. I think in 5.0 also you need to use Clientconsole to download this information.
d. If this is all okay, then try running SQL profiler and check if the query to the ides db is being executed by the framework. If the query is fired then it means application seems to behave properly but the query is not retrieving relevant details.
For further details feel free to contact me..
thanks,
Piyush

"Creation of login object failed" after MAS generation

Hi everybody,
I am working on CRM Mobile Sales 5.0 SP6. I have performed the initial generation with the .NET Application Studio. It gave me 6 errors and some warnings. Now when I tried to logon my mobile client I 've got following error:
"Creation of login object failed".
Visual Studio is installed on partition "C:\Program Files\" and Mobile Sales on "D:\SAP\"
Has someone any ideas? Thanks in advance,
Mirko

Hi Mirko!
In your app you're calling unknown data structures. While generating the "compiler" read the names and want to create the relevant structures but the necessary data to do this are missing. You have to start fist the client console doing a complete meta data generation. If this runs without error your generation inside the studio will succeed, too.
BTW: In your first posting you've written "D:SAP..." and in your last the error-message was "D:ProgrammeSAP..."...
Perhaps different settings?
Do you have made already a successful generation with the actual installation?
Good luck,
Ingo
Message was edited by:
Ingo Schmökel

Creation of individual object in crm

Similar Messages

Maybe you are looking for