Creation of Infotype in Campus Management

Hi Guy's,
Please help me how to create the custom infotype in CAMPUS MANAGEMENT.
Thanks and Regards,
Laks

Hi Narayana,
Please send me Campus Management Documents. My Mail-id is [email protected]
Thanks and Regards,
Bhavani.

Similar Messages

How to create the custom infotypes in Campus Management

Hi,
Please help me how to create the custom infotypes in campus management.
Thanks,
Lakshmi.

Hi,
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Cheers,
vasavi.
kindly reward if helpful.

Creation of Infotype Menu

Dear Sir/Mam
Greetings of the day!!!
I am in the process of creation of infotype menu. My infotype menu will be consisting of Basic Personal Data (S1) , Time Data (S2) , Payroll Data (S3).
I went into spro, then personal management then in to personal administration then into customizing procedures then in to infotype menu.
In infotype menu i went into User group dependency on menus and info groups. There i created S1 , S2 & S3 and gave reference group 40.
After that i went into infotype menu and there i created different infotypes which i need under S1, S2 & S3 respectively.
Then i went in to Determine choice of infotype menu . Under that i went into User group dependency on menus and info groups. Under that i created Personal Administration (11) and gave reference group 40.
Then i went int infotype menu. There i wrote 11 and under that S1, S2 7 S3
But now when i going to PA30 it is not showing. I also want that the infotype menu which i have not created should not be shown,
What should i do now? Have i missed any step?
Please guide me....
Regards
Harshvardhan
9312926182

Hi,
if you want to change it to '11', users will have to use the set-/get-parameter PMN (infotype menu), the corresponding infotype menu appears when you call the initial HR Master Data display/maintenance screen for the first time. Otherwise the infotype menu "01" is used.
Wilfred.

Norma flow of Campus Management

Hi CM Masters,
I am new in Campus Management.
Please tell me the normal flow of CM.
I have some understanding..please correct me..
1-Creation of Org Unit
2-Attach Program of Study with org unit.
3-Attach Modules with Program of study.
4 Create Student
5 Admission of student.
administration of Student.
7 Module Booking.
8 Assesment.
9 Progression.
10.Re-registration/De-Registration
11-Degree Audit.
12 Alumni.
Please tell me if any steps I am missing. And if you people have any documentation where I can found that what process is necessary before going from one steps to another it would help me.
Thanks a lot

Hi Ankita,
For assesment process , module booking plays a very important role
When Sessions Of Offering are assigned to the module , grading can be done .
<b>Event Planning and booking :</b>
Event Planning is more useful when you have two classes (A ,B )
Eg:
Decision Making(DM) is the Module and two categories of section having the same module , resouces etc .
Here comes the Event Planning : Where u can define the timings for the classes , the resource , location etc .
Event Planning is done for Module DM where the template differs as DM_A ,DM_B .
Then you can book the students for that particular event DM_A ,DM_B .
So easily you can differentiate the student belonging to the class DM_A or DM_B provided its already known that the partcular module is offered in that particular Sessions Of Offering .
Regards,
Gajalakshmi .

User Exit Triggered during Campus Management Student admission data created

Hi Exports,
This is jnana ranjan working as a campus management implementation project.
Here we are impl student admission process workflow and i want trigger my event through user exit. I am new in user exit please guide me how to find user exit for CM and how to implement this. If you have abap code for similar requirment then please send me through my mailid: [email protected]
Please help me this is urgent requirment for my University client.
Advance thanks you.
Regards,
Jnana

Hi,
Can any one please let me know the user exit triggered during campus management student admission data creation and .
Thanks ,
Jnana

Problem With Device Management in Campus Manager

hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
why does it hapened ?
thank you .

Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.

Creation of infotype having Subtype

Hi ,
      Please tell me link or document regarding creation of infotype having subtype .
      i know how to create simpe infotype . But not created any infotype having subtype.

Hi
try this...
Goto PM01 and enter Infotype: xxxx eg: 9495
Make sure that first field component type is SUBTY
Like: zzstype   SUBTY      Char      4      Subtype
Now click on 'ALL' button.
Creation of Subtype:
Goto initial scren PM01.
In menu tool bar, goto -
Subtype Characteristics click on enter.
Now click on new entries,
subtype     name
01             Annual shares
02             special premium shares
click on save.
Note: All subtypes are stored in T591A table
Now assigning subtypes to infotype.
now click on 'Technical Attributes' in PM01 screen
change, select ur custom infotype'xxxx' and click on 'details'   on application tool bar.
subtype field: zzstype
stype table: T591A
stype text table: T591S
stype const table: T591A
Now click on 'SAVE'.
Now check ur infotype with subtype.
Hope this is helpfull information.
regards
Sai

Data Collection in Campus Manager hung

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
I am running LMS 3.2 and Campus Manager 5.2.1. My data collection in Campus Manger for my devices does not complete and runs indefinitely. It has been hung in the "running" state for the past week and will not complete. I only way I found to get it out of the "running" state is to reset the ANIServer service and reboot the server. I have had this problem since I have upgraded to LMS 3.2. Does anyone have any input of this issue or possible solutions?

The data collection hung again as expected over the weekend. The ANI.log file grew to 1.8 GB again. It is to large for me to open it. I could try to split it up into smaller files. What should be my next course of action?

AniServer Campus Manager problem

Hi I recently ran a Device patch update and ever since I have had major problems with Campus Manager.
I figured it was Aniserver related So i have done the following so far:
1- I reinitialised the ANI Database
2 - I replaced the aniserv.properties with the .orig file.
Still the problems exist even if i managed to get the Aniserver started campus manager data collection would have problems and intermittent error messages when trying to access Campus Manager admin pages.
3 - I decided to upgrade to LMS3.2 SP1
It seemed to be ok with data collection but then when I came in to work today it hadnt run any scheduled aquistions when i went tinto the admin pages I had the error messages again unable to get properties from server.
4 I decided to try a complete restore of the database to a date before the initial device package update.
But I still have problems with the aniserver Failed to run.
Please Help!!
Kind regards Dean
Here is the Ani log
2011/06/23 13:11:10 main ani ERROR ServiceModule: Failed to instantiate com.cisco.nm.ani.server.dfmpoller.NoServiceModule
2011/06/23 13:11:10 main ani MESSAGE DBConnection: Created new Database connection [hashCode = 6164599]
2011/06/23 13:11:12 main ani MESSAGE PartialSMFCommit: Partial Commit is enabled for DataCollection
2011/06/23 13:11:16 main ani ERROR POStore: Exception caught: com.cisco.nm.ani.server.frontend.AniStaticConfigException: AniStaticConfigException: Failed (sql) to verify/construct schema for PO com.cisco.nm.ani.server.topo.PagpPortChannel because: com.sybase.jdbc2.jdbc.SybSQLException: SQL Anywhere Error -116: Table must be empty
2011/06/23 13:11:16 main ani ERROR AniLoadConfiguration: AniStaticConfigException: Failed to construct or verify database

Seems to be working fine now I used the info in the following link to reinitialise the ani.db https://supportforums.cisco.com/thread/2083513
Using this alone did not fix it opt/CSCOpx/bin/perl /opt/CSCOpx/bin/dbRestoreOrig.pl dsn=ani dmprefix=ANI
But doing this as well seemed to sort it:
First, set the CiscoWorks Daemon Manager service to Manual, and reboot the server. When the server reboots, delete NMSROOT\databases\ani\ani.log if it exists. Then run:
NMSROOT\objects\db\win32\dbsrv9 -f NMSROOT\databases\ani\ani.db
After that, set the Daemon Manager service back to Automatic, and reboot again
Regards Dean

Campus Manager report - Ports in error Disabled state

Hi,
I have LMS 3.2 and I wonder how Campus Manager collects information from the switch to generate a report of discrepancies, namely a report of "Ports in Error Disabled state"??
I find that I have ports in errDisabled state but Campus Manger doesn´t show this information in "Ports in Error Dissabled state" report. What could be the problem?
Thanks.

Hi,
Campus Manager do snmpwalk on the ciscoErrDisableMIB to get the status of the error disabled ports.
Thanks,
Gaganjeet Singh

Campus manager user tracking problem

Hi We are using LMS 3.0.1 and the campus manager verson is 5.0.2. We have two subnet which are used for the management ip of switch kept in two different geographical areas. I have made the entry of all devices kept in both subnets and all the devices are know device in DCR, RME and DFM. also after data collection the devices are shown in campus manager database. But I am not able to learn the end host details of the hosts connected to one of our segment.
even if the perticular subnet is not appearing in "campus user tracking" as well as the devices belongs to the subnet. but I am getting all end host details from the second subnet.
please help.

Hi clarke,
i have updated the cm to the latest but still it did not learn. Later i added the 10.188.7.x ip addresses manually in the discovery settings instead of " *.*.*.* " - ip range. Now i am able to see these devices in topology view > layer 2 veiw as connected devices & not seen in unconnected..
Now i need to see the hostname, ip address etc details of these segments in UT acquisition window.... Secondly in topology view, the core switch is showing in "?" question mark symbol. This device is WS-C6509-E (sup-bootdisk:s72033-ipbase-mz.122-33.SXH3a.bin). I tried to delete this device from common services and added it again, there i selected "ws-c6509", i did not see the " ws-c6509-E".
in Cisco site, the serial number of the device is showing as the device "VS-C6509E-S720-10G"
Can u pls help me on this..
regards
rajesh

Campus Manager No Data Collected from Network

Just intergraged CiscoWorks with ACS. Now when we select Campus Manager | Visualization | Topology Services we get the following error message:
No Data Collected from Network
1.Devices are not availiable from DCR or
2.You have not performed data collection at least once
When we look at Common Services | Devices and Credentials | Device Discovery the total devices discovered and the devices reachable indicate there are devices that were found.
We could see devices fine before the ACS intergration but now, we cannot see any devices.
Any thoughts?

The devices (original clients) that I defined are as follows:
10.0.1.*
10.0.10.*
10.0.2.*
I was able to see these clients. Deleted the above clients from ACS and added:
10.0.1-10.*
So that I can see the above clients and others (10.0.3.*, 10.0.4.*,etc).
I can still see the original clients only. The others show up in Devices not configured in ACS report.
What do I need to do? What did I miss?

Wrong CDP data in Campus Manager

Hi,
we have a LMS 3.2 in a Windows server. In Campus Manager, some CDP neighbours are shown as wrong. In some cases they are shown with their IP address instead of their name (they are added in DCR with their name!!) and in other cases, the neighbour is other device different than the real one.
What is the reason for this behaviour?

Sounds like either a bug, or bad data in the ani database. I haven't seen any topology problems yet in our 3.2 installations, so it could be something in your topology has messed up the database. Make sure all devices have a unique sysName (i.e. hostname+domain name). If not, then you can get similar behavior to what you are describing.

Campus Manager Data Collection always Idle

Hello,
Every time I start Campus Manager Data Collection, I get a window "Notified server to run Campus Data Collection" but status always stay Idle (not running).
LMS 3.2
Campus Manager 5.2.1
Thanks

most likely you are hitting the following bug CSCtd49439

Error : 404 not found while opening Ciscoview from Campus manager with LMS 3.2

Hi Friends,
While opening ciscoview from Campus Manager Topology, getting error 404 not found by apache web server. pls guide me to resolve this issue if anyone faces the same situation earlier.
Thnx

The name of Enterprise Manger service is em you can find it under deployments in weblogic console. Its status should be active and ok.
Have you tried this
http://technasir.blogspot.com/2013/04/enterprise-manger-is-not-working.html
regards
Nasir

Creation of Infotype in Campus Management

Similar Messages

Maybe you are looking for