Creation of Library and Report in Report Painter with Z tables.

HI,
When I am creating library in report painter with Z table it is giving the following error message 'Table ZCO_SEMI_FIN_VAL is not installed in Report Writer'.
Can u help me how u install Z table in report painter and create the characteristic and key figure of the Z table in the library.
Regards,
Partha B

Hi Partha Pratim Bhar,
In order to bring / enable a Z table for you to build a library, you will have to set it at transaction GRCT.
Here you need to configure - table (Z table) , characteristics and Key figures.
You can refer any other tables by SAP in GRCT for reference.
Revert if you require additional help.
Regards,
Subin John

Similar Messages

  • Library in Report painter

    Dear All,
       Can any one tell me what exatly determines the library in report painter otherthan pre-defined coloumns and Rows, and i still have a confusion in choosing library, Pls throw some light to eliminate confusion..
    Regards,
    Suresh Patipati.

    Hi
    Library determines the following in report painter report:
    Table that can be used in the report
    Charaterstics that can be used in the report
    Key Figures that can be used in the report
    Basic Key Figures that can be used in the report
    Regards
    Sandesh.

  • Attaching Variable to the Library for Report Painter for Cost center report

    Hi,
    I want to attach the Variable - "Cost element group" to the Library for Report Painter for getting Cost center report. The Cost center report should be cost element group wise with actaul, budget and variance. Please let me know the process.

    hi..
      I think you have to first define Attribute mis as "V" in Cost element master basic data tab for the elements you want to capture as varible.
      Then make a Cost element group / set in KAH1/GS01 and use it in your report.
      kkumar

  • What is the significance of report writer and report painter

    hi all,
    can anyone throw light on report write and report painter, when and why it used with examples.
    thanxs in advance
    regds
    hari

    Dear Hari,
    http://www.virtuosollc.com/PDF/Get_Reporter.pdf
    http://help.sap.com/saphelp_erp2005/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/frameset.htm
    Report Painter allows you to create reports using data from SAP application components, which you can adapt to meet your individual requirements.
    Many of your reporting requirements can already be met by using the standard reports provided by various SAP application components. If these SAP standard reports do not meet your reporting needs, Report Painter enables you to define your specific reports quickly and easily.
    Report Painter fulfills a function similar to Report Writer, but is easier to use. Most of the functions found in Report Writer have been built into Report Painter; however, you do not need to be familiar with all Report Writer concepts (such as Sets) in order to use Report Painter.
    When executing a Report Painter report, it is displayed by the system in Report Writer format. You thus have access to the same functions as for Report Writer reports defined in the same way, and can combine Report Painter and Report Writer reports together in a report group.
    Report Painter uses a graphical report structure, which forms the basis for your report definition and displays the rows and columns as they appear in the final report output.
    To facilitate report definition, you can use many of the standard reporting objects provided by SAP (such as libraries, row/column models, and standard layouts) in your own specific reports. When you define a Report Painter report you can use groups (sets). You can also enter characteristic values directly.
    Advantages of Report Painter include:
    Flexible and simple report definition
    Report definition without using sets
    Direct layout control: The rows and columns are displayed in the report definition as they appear in the final report output, making test runs unnecessary.
    http://help.sap.com/saphelp_47x200/helpdata/en/56/32e339b62b3011e10000000a11402f/content.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/5b/d22cee43c611d182b30000e829fbfe/frameset.htm
    Regards,
    Naveen.

  • Add in Library for Report Painter/Writer 9PCC

    Hi SAP,
    I need to include in Library for Report Painter/Writer the component 9A2 CO-OM-IS-BP Business processes: Special reports because I need to run 9PCC, but 9PCC don't exist in my system.
    Would I like know if it exist the SAP note include in Library?
    Best regards,
    Edited by: Fabio Gil on Jul 1, 2010 6:35 PM

    Hi,
    You can create a library via GR21 transaction. What tables do you want to join? Depending on this, one can tell whether it's possible or not.
    You can search for available info on the forum; similar questions were already asked.
    Regards,
    Eli

  • Can you create report using report painter with Tcodes:FAGLL03,FCHN

    Hi Experts,
    1.I want to create report using report painter by using tcodes FAGLL03,FCHN.Can i create with report painter?
    2.i never used report painter can anyone provide report painter pdf for ecc6.0
    3.can any oneguide me how to develop report in report painter by using this tcodes.
    4.If not possible can i do with report writer?
    Regards,
    naresh.
    Moderator: Don't mix report painter with the TCodes wyou mentioned; there is no link between them. Regarding Report Painter - search SDN. Respect the rules and don't cross-post: you asked the same unclear question in several forums!

    cross posted
    Edited by: nareshvarma on Jul 19, 2010 9:11 AM

  • Create Report Painter using LIS table

    Hi Expert,
    I'n new in ECC version but I found we can create report painter using LIS table,
    but I'm not success to create report without error or debug
    Anybody have the documentation about it ?  or tell me how it works ...
    Please ..urgent...need to tell client about it..
    Thanks

    Hi,
    I have not worked on it but you can try this out:
    TCODE for report writer table is GRCT.
    There You need to add your z fields in some pre-defined structure like CCSS and then activate the structure and then activate characteristics.
    NOTE: 24 charcter is max. length for the characteristics.
    Regards,
    Harsh.

  • Custom fields in Report painter in CCSS table

    Hello Experts,
    I am in a processes of developing a report painter with custom fields in the selection screen.
    The custom fields are available in PRPS table.
    With hard difficulties I brought the custom fields in selection screen of the report painter.
    I have added the fields in the structure CI_CC1S
    Everything is fine. But if I enter a value in the custom field, the report is not fetching any data.
    These custom fields are related to the WBS element.
    For example if the value of the CUSTOM field is 'AAA', then I want to retrieve ony the WBS element which has 'AAA'.
    Somewhere I am missing a procedure.
    Could anyone suggest how to achieve this.
    Thanks !!!
    Best Regards,
    Vasanth M

    Any Suggestions

  • Report painter for bseg table

    hi,
    hv any body ever created report painter with data from bseg table..pls advice

    hi
    good
    You can try with the Tcode SQVI(Quick Viewer). Which is the tool that we can use to generate reports with out code.
    thanks
    mrutyun^

  • Construing a report writer with a table of client - Table YSCO_BASE_ALOCAC

    I am construing a report writer with a table of client - Table YSCO_BASE_ALOCAC
    When I definition the library, the message is show...
    Table YSCO_BASE_ALOCAC is not installed in Report Writer.
    Message no. GR 493
    Diagnosis
    The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables. This is not the case for table YSCO_BASE_ALOCAC.
    Where I can to make this configuration?

    hey thanks again
    i tried it it works fine..
    WITH     e     AS
         SELECT     consultant , client , project
         ,     task , effort ,date_  , billable
         FROM    trial_3_details
    SELECT     *
    FROM     e
    PIVOT     (     sum (effort)
              FOR     date_     IN     ( '07/22/2013'     AS monday ,
                                         '07/23/2013'    as tuesday,
                                        '07/24/2013'    as wednesday,
                                         '07/25/2013'     as thrusday,
                                         '07/26/2013'     as friday,
                                          '07/27/2013'     as saturday,
                                          '07/28/2013'     as sunday                        
    CONSULTANT
    CLIENT
    PROJECT
    TASK
    BILLABLE
    MONDAY
    TUESDAY
    WEDNESDAY
    THRUSDAY
    FRIDAY
    SATURDAY
    SUNDAY
    Syed
    Facebook
    Security
    Privacy Settings
    N
    Syed
    Google
    Security
    gmail privacy features
    Y
    8
    Patel
    Dell
    Recruitment
    Profile Detailing
    Y
    Sanjay
    Google
    Software
    Webpage development
    Y
    John
    Dell
    Hardware
    Processors
    Y
    Steve
    Lenovo
    Administration
    Attendance
    N
    Syed
    Yahoo
    Security
    Firewall Check
    Y
    Sanjay
    Google
    Software
    debugging
    N
    Steve
    Microsoft
    Adminstration
    Attendance
    N
    Steve
    Yahoo
    Adminstration
    Attendance
    N
    One more question how do i automatically set the days instead of explicitly declaring it every time?? and also i want to add one more column
    which gives overall week 'effort' of a consultant..

  • HT201413 itunes told me there was an error downloading 2 songs. Looked in my library and there are 4 songs with ! in front of them. How do I fix this?

    itunes told me there was an error downlaoding 2 songs.  I looked in my music library and there were 4 songs with a ! in front of them. How do i fix this?

    I fixed it! Here's how:
    I downloaded MICROSOFT FIX IT PROGRAM (IT'S FREE) and I REALLY RECOMMEND IT!
    http://support.microsoft.com/fixit/
    IT FIXED MY ERRORS FOR INSTALLING AND UNINSTALLING. I WAS NOT ABLE TO PROPERLY UNINSTALL ITUNES/BONJOUR ECT.
    THEN I REINSTALLED AND IT WORKED!
    I have trying to updat my itunes for almost a year I think. So I am excited!!!!

  • Report Painter - Hide library and report instead of deleting

    Good Afternoon Everyone,
    My finance users are pressuring me to clean up the navigation in the GRR3 report painter transaction.  Many of the libraries that are displayed are standard SAP libraries and I'm hesitant to begin deleting standard SAP libraries, reports, and report groups since you can't get those back once deleted.  Is there a possibility to hide libraries/reports that are not being used any longer?  I'm on my own and would like your input about what the best practice is when faced with this scenario.  Thanks in advance for the help.
    Jordan
    Edited by: Jordan Simons on Apr 4, 2011 9:06 PM

    Hi,
    I don't know if its possible to suppress/hide libraries/reports.
    Create T-codes for the reports the users really need and add the reports to the corresponding area menu in SAP. Thus users don't have a need to use GRR3 anymore, remove the T-code from the authorization concept.
    best regards, Christian

  • Report Writer and Report painter documents

    Hi
    If anyone have any documents regarding the report painter and writer, could you please send it to [email protected]?
    Documents with step by step creation of custom report from scratch...? or anything related to these...except the help.sap.com site links..
    Anyhelp is greatly appreciated...
    thank you
    thilothama

    Hi all,
    I am having this report s_alr_87013549 - here I can select by Projects and get the cost elements. I want to use this report as a base for my custom report, which should give me the same result as the above report with Project, WBS, Network activities for each line level..My questions are,
    1. Do I have to define my own library? with columns I need or use the library that the S_ALR report is in??
    2. I am having trouble in understanding characterics, key figure cocncepts - also info structures - to define a report with rows and columns like this - what shld i do>??
    Project name|WBSElement|Network Activity|NetworkActivityElement|CostElemt|PartnerObject|actualCOSt|PlanCost
    These columns should be there in my report...
    Finally - can i have more than 4 columns in my report??
    Please provide Expert advice....I will be really thankful...

  • Budget and Report Painter

    HI Everyone and Consultants,
    Well i am at abaper and dont have much knowledge in finance controling.
    First issue:
    Currently we update our budget using the t.code KPA6 using Profit Center and Cost element.
    It is succesfully getting update at KPA7.
    But why GLPCT table is not getting update?? Any idea ?
    Second Issue :
    I am working Report painter for the KPA6 with the Profit Center.
    In the t.code GR21 i am creating a library with name ZF2 and table GLPCT but the table does not having the
    value which is been update at the KPA6.
    Any idea anyone ? For you information recently some consultants did internal order configuration for the company.
    Can this config give any problem for the KPA6.
    Thanks in advanced.

    HI Eli.
    I have spoken to my Fi/CO consultant and he had told me the integration is done.
    But it is still not updating in the GLPCT.
    As per my knowledge kpa6 is getting update at the COSP table and due to this i am unable to complete my report painter.
    Is it possible for you to give any basic idea or t.code to integrate.
    Hope you can really help me.
    Thank you very much in advanced.
    regards,
    mrsaravannan

  • KPA6 and report painter

    HI Everyone and Consultants,
    Well i am at abaper and dont have much knowledge in finance controling.
    First issue:
    Currently we update our budget using the t.code KPA6 using Profit Center and Cost element.
    It is succesfully getting update at KPA7.
    But why GLPCT table is not getting update?? Any idea ?
    Second Issue :
    I am working Report painter for the KPA6 with the Profit Center.
    In the t.code GR21 i am creating a library with name ZF2 and table GLPCT but the table does not having the
    value which is been update at the KPA6.
    Any idea anyone ? For you information recently some consultants did internal order configuration for the company.
    Can this config give any problem for the KPA6.
    Thanks in advanced.
    Cross-post

    Hi Priya,
    Here are some salient features:
    1) Report Painter has 90% of the functionality that Report Writer has and is easier to develop.
    2) The last time I did anything on it, from the SAP main menu, choose Information systems->Ad hoc reports->Report painter.
    3) Report Writer functions can be accessed from within the Report Painter.
    4) Report Painter/Report Writer has four main components: Sets, Libraries, Reports, Report Groups
    5) The main difference between the two RW and RP is the graphical user interface of the Report Painter.
    6) It is generally used in FI-SL reporting.
    For more information, please check this links.
    For Report Painter
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    For Report Writer
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
    Hope this will help.
    Regards,
    Ferry Lianto

Maybe you are looking for