Creation of Materialized view and Materialized view log.

I wanted to create materialized view with 'REFRESH FAST ON COMMIT' option.
1) Table1 --it is partitioned range + list -- Added primary key
2) view1 -- having primary keys on view's base table
Steps:
1) create materialized view log on Table1 ; -- default primary key
2) create materialized view log on view1. --- It is giving below error.
ORA-00942: table or view does not exist
i wanted to create Materialized view like below
create materialized view
REFRESH fast ON commit
as
select ...
... from table1
where c1 in (select c1 from view1 where ... );
Question:
1) As i am getting above error while creating MV log on view. Can we create MV log on view or we have to create MV log on view base table?
2) To create MV with ''REFRESH FAST ON COMMIT' option , do we need to have primary key on master tables?
Any pointers on this will really helpful.
Thanks
Prasad

Also created MV LOG on 3 tables and tried with joins ..
create materialized view
REFRESH fast ON commit
as
select ...
... from table1 , tab2 t2,tab3 t3
where ....
and ...
Get same error ORA-12052: cannot fast refresh materialized view AVSYS.EVENT_LOG_MV
2052. 00000 - "cannot fast refresh materialized view %s.%s"
*Cause:    Either ROWIDs of certain tables were missing in the definition or
           the inner table of an outer join did not have UNIQUE constraints on
           join columns.
*Action:   Specify the FORCE or COMPLETE option. If this error is got
           during creation, the materialized view definition may have be
           changed. Refer to the documentation on materialized views.

Similar Messages

What is the difference between view and materialized views

Hi
What is the difference between view and materialized view ? can we update the base table using views

can we update the base table using viewsYes:
VIEWS
1. an updatable view is one that lets you perform DML on the underlying table
(see Oracle Database Concepts 10g - 5 Schema Objects)
2. non-updatable view requires INSTEAD OF Triggers
(see Oracle Database Concepts 10g - 22 Triggers)
SNAPSHOTS
You can have updateable (and writeable) snapshots - in updateable (writeable) MV replication.
Oracle uses snapshots (Materialized Views - MV) for two different purposes:
1. replication
2. automated Query Rewrite facility (first introduced in Oracle Discoverer, later included in Oracle database 8i).
Replication types in Oracle are:
a) Basic replication (MV replication)
- transaction based
- row-level
- asynchronous from master table to MV (Materialized View)
- DML replication only
- database 7 / 8.0 / 8i / 9i / 10g
- Standard and Enterprise Edition
1. Read-only MV replication
2. Updateable MV replication:
2.1 asynchronous from MV to master
2.2 synchronous from MV to master
3. Writeable MV replication
b) Multimaster replication
- transaction based
- row-level or procedural
- asynchronous or synchronous
- DML and DDL replication
- database 7 / 8.0 / 8i / 9i / 10g
- Enterprise Edition only
1. row-level asynchronous replication
2. row-level synchronous replication
3. procedural asynchronous replication
4. procedural synchronous replication
c) Streams replication
- (redo) log based
- row-level
- asynchronous
- DML and DDL replication
- database 9i / 10g (10g has Down Streams Capture)
- Enterprise Edition only (Standard Edition 10g can execute Apply process)
Regards,
Zlatko Sirotic

Differences between view and materialized view

Hello,
Please tell me the Differences between view and materialized view in oracle 9i.
Thanks and regards
Madhuri

How can I create index in a view?
Please read reply of Justin Sir.
Regards
Girish Sharma

COOIS: Material number in Component view and Operation view

Hi,
In COOIS report, Material number is required in Component view and Operation view.
How can we do this.
Regards,
somiraghu

Dear,
Under List-Operations we dont have the material number in standard layout
Alternatively you can check for list-Object Overview report,which will give a overall report which includes -header details,operation details,component details.you can change the layout as per your requirement
Material number is there any standard transaction for that.
need to create customised for that, see below table's
AUFK, AFKO, AFPO, AFRU, AFVV, AFVC
Regards,
R.Brahmankar

Very Urgent Extn.Material Group and Material Group.

Hi Guru's,
      I was created Generic D.S Using table (AFRU) for Orders Confirmation.I was Created Info Source AND ODS.
     I nedd to maitain ODS Extn.Material Group and Material Group.but These fields are not Avilable in Data Source (AFRU Table not having).
    Data source having Field AUFNR (order number) I was mapped To BW Object 0prodorder. I was maitained master data for 0prodorder.
0prodorder master data (0prodorder_attr) having 0material (PLNBEZ Field mapeed to 0material) as a navigational Attribute.
i am asking to all is it possible to bring Extn.Material Group and Material Group update rule level using master data attribute option?
Please help to me Above issue.it's very urgent.
Thanks & Regards,
Guna.

Hi Manju & Gopi,
    This Order Confirmations cube having data from 2 data sources.
    There is a performence issue to clubbing so many tables.
     Any way i was maitained 0material is attribute(Nav Attr) of 0proorder.i was loaded 0prodoreder master data.
   0material having master data .Extn mat group & Material group are Nav Attributes of 0material.
Now is it possible to maitaining the data in cube Extn mat group & Material group ?
Please Give me Suggestion with out adding another table using view.
Thanks & Regards,
Guna.

What is the main difference between view and materialize view and advantage of Mview ??

What is the main difference between view and materialize view and advantage of Mview ??

1.A view uses a query to pull data from its associated tables.
2.Views do not have data's physically stored in the Database.
3.Views Get the Data from 2 or more tables and displays as a single block.
4.But a materialized view is a table on disk is a result set of a query done.
5.A Materialized view can have data's in the database.
6.Materialized view are used for Boosting the Performance.
7.And the important one is Materialized views are updated based on the parameters defined when they are created.
8.By using triggers we can update the data in a materialized view.
9.When you call a materialized view it will show the data when it was last updated.
Hope it helps.

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

Difference Between G/L View and Entry View in New G/L Accounting

Hi,
Can anyone tell me the difference between the G/L View and Entry View in New G/L Accounting as we are upgrading from 4.7 to 6.0.

Hi,
Entry view is the view to show how you have done data entry while posting a transaction and general ledger View is the document splitting view, where system will show you the split posting which system creates on its own.
Example given by Alex above is general ledger View, ie: how system would split the line items based on base item categories.
Regards,
SAPFICO

A report for MM where basic list will contain the material no and material

how to develop a report for MM where basic list will contain the material no and material description for the range of material no chosen by user. ...plz help me...how to do this step by step..

Hi Raja,
Firstly declare a select-option for material number.
write a select query specifying the required field and specify a where clause
as
WHERE MATNR IN S_MATNR.
Obviously you will select the records into internal table and so loop that internal table and display the records...
The records will be displayed on the basic list.
Hope this will solve your problem.
Regards,
Narin Nandivada

Differences Between Entry View and GL View - Doc. Splitting

Hello Experts,
I need some help about an issue occuring in our Client right now, differences in Entry view and GL View. Any help will be appreciated.
- Debit or Credit Balance posting of an account does not match with the balance posted in GL View, generally the GL view posts an amount above of the Entry view, and then it cause the Debit/Credit balance does not match with the movement in Entry View. Example Below from Quality System:
Debit Balance in January 2013: 319.794.641,38
Movement from FAGLL03 - OK.
Movement from FBL3N - Entry View Difference: 319.794.619,86 - 319.794,641,38 = 21,52 Debit
Checking NEW-GL Movement, we found the posting difference:
The Document Entry View: 5.465,22 Credit From Bank Account
The GL View - SAP Credited 5.486,74 Bank Account PC 1411 and Cr Bank Account PC 1444.
Total: -5.486,74 + 21,52 = 5.465,22 OK on Balance, but not OK from movement considering the Entry view.
- Questions:
- I understood the calculations, it was calculated as mentioned in note 1072850_Field overflow or very large amounts due to doc splitting
- Is this supposed to happen by SAP Doc.Splitting perspective?
- I am facing this issue because we need to send to the government account balances and their movements, and according to laws we need to pay additional amount for addtional lines generated, so it was better to send the information based in Entry View, not in GL View.
- FS10N Show warning message "New general Ledger Implemented, use FAGLB03", and when i execute the transaction the balance showed was the balance from FAGLB03.
- SAP 605 APPL.
Regards,
Leandro.

Hi ,
Can you Please look at OSS note
1655571 - Multiple values and multiple/additional line items appearing in the NewGL View when compared to Entry View
Many Thanks

Add a simple switch to PDF Reader to change between MY-VIEW and ORIGINAL-VIEW

I would like to open pdf file with my same default viewing preference *every single time* that I open a PDF file, regardless of what the original document creator set as the default view. It would be nice to have a SIMPLE switch between MY-VIEW and ORIGINAL-VIEW. It's very frustrating to have to keep switching my view preferences every time I open a new file with a different default.

Thank you Bernd, but that is only part of the solution. For example, I do set the Page Layout to 1-page-continuous. MOST of the time it keeps this setting, but some documents either override that setting, or perhaps it reverts back to a default (maybe with version upgrades?). The other part is that I always want the menu-bar and toolbar to show up. Some documents hide these when they open. I realize that I can hit [F8] and/or [F9] to toggle these, but there are additional settings. I also want to always have the selection tools available, etc. Bottom Line: I just want a collection of settings that I can call up with a single, simple shortcut or button, so I don't have to perform multiple steps just to get the tool back to my standard configuration whenever something changes it.

How can the info block be assigned with the view and assign view to users.

Dear Friends,
Anyone could plz tell me how can the info block be assigned with the view and assign view to users. Also how can the info block in sale summary be assigned with a view and how to assign this view for user.
Regards,
Ashima

Hi,
To define view and to make it default
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Define Reporting Views (Tcode:OVCD).
To assign default user to the view.
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Default View To User (Tcode:OVCC).
To assign Elements of SAPScript "SD-SALES-SUMMARY" to information Blocks To A View use
Goto SAP IMG > Sales and Distribution > Sales Support (CAS) > Sales Summary > Assign Information Blocks To A View (Tcode:OVCB).

General ledger view and entry view

Can any one help me in understanding the difference between GL(general ledger) view and entry view?

Hi,
While entry view shows the Customer/ Vendor and other revenue/ Expence GLs
General ledger view shows the Reconciallation GL and revenue/ Expence GLs. We cannot find Customer and Vendor details here.
Hope your question is answered.
Regards,
Sharan

Filtering R/3 Material Groups and Material Types

Hi,
I am trying to filter the Material groups and material types during master data upload from R/3 to SRM 4.0
I am tried doing the following:
1. In Txn R2AR2, i set up the request for DNL_CUST_PROD1 for MARA-MATKL(Material Group) & MARA-MTART(Material Type)and then run the Txn R3AR4 with DNL_CUST_PROD1. The replication was successful, but it pulled in all the R/3 backend material groups and material types.
Now i deleted the replicated material types and Material groups in SRM using SRM Std reports and this too was successful.
2. Now i tried another method - In Txn R3AC3, i selected the Object DNL_CUST_PROD1 and i added table MARA and set up the filter requirements for MARA-MTART(Material Types) and MARA-MATKL(Material Groups), i synchronized the filters and then when i selected the object DNL_CUST_PROD1 in Txn R3AS for initial upload, even this is pulling in all the material types and material groups from R/3 without filtering
Can anyone please let me know the exact procedure to filter out the R/3 Material types and material groups during initial upload of this data into SRM 4.0
Thanks

Hi,
Before starting the INitial load for MATERIAL,for filetr settings ,Go in tcode R3AC1.
There select the Object name as MATERIAL and click on the "filter settings" tab.
There in OBJECT FILTER SETTINGS
Enter the relevant filter criteria:
e.g. If you wnat to filter on Material type(MARA-MTART):
The input will be as follows:
Table /Structure :MARA
Field :MTART
OP :EQ Equality (= Low)
Low: "Material type name"
Incl/EXcl: Inclusive defined
And then click on the button "FILTER SYNC".
The filter settings are complete for the Material download.
HTH,
BR,
Disha.
Pls reward points for helpful answers.

Diff bt Help view and Maintanence view

hi gem's
i need the diff bt Help view and Maintanence view with example...............

Hi
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
Regards
Anji

How to create Maintaince View and Help View

Hi,
Can u pls tell me the step by step procedure for how to
create Maintaince View and Help View.
And what's the use of these view's.
Regards,
Kumar

FOR MAINTANENCE VIEW
Create a table or a view in transaction SE11.
A function group in SE80 transaction
1>go to se54 transaction.
2>give the name of the table /view starting from z.
3>select "Generated Objects" radio button.
4>click on "create/change" push button.
5>you get a pop asking you whether to create modules ,click on YES
6>give "authorization group" as temp.
7>give the function group name created by you.
8>click on "find Scr numbers "push button on the application tool bar.
9>in the pop up that you get select the 1st option and press enter
10>click on the create push button (it is beside "Find Scr numbers" push button)
11>selct local object and pres enter.
12>go to SM30 transaction.
13>give the table/view name
14>click on "maitain" push button.

Creation of Materialized view and Materialized view log.

Similar Messages

Maybe you are looking for