Creation of Multiple Account Groupings for Mvt.Type 201

Dear All,
We have one material code for a consumable material type and one valuation class attached to it. We have one Stock G/L account and multiple consumption G/L accounts. We need the post to multiple consumption G/L accounts and cost centre when we issue goods through Mvt.type:201.
What are the configuration settings to be done to create multiple account groupings in SAP . ECC6.0.?
Regards
Saikat

Hi
For the scenario described by you, you need not have to make any config settings. The G/L account defined in SPRO (Valn and Automatic Acct Determination) is used for Automatic Account determination i.e. when you do not enter a specific G/L account during Goods Issue.
As can be seen from your query, you want Consumption account to be posted to different G/L accounts but the material is assigned only to 1 Matl type. There are 2 ways to solve this problem:
1. If you know the G/L accounts that the system should post to before hand i.e at the time of Matl creation itself, then you can configure Split Valuation and then assign more than 1 Valuation class to the Matl. For each of these Valn classes, you can configure Automatic Account assignment. By doing this, at the time of Goods Issue, the system will ask you the Valn type and will accordingly post to a seperate G/L account.
This is possible only if the no of G/L accounts per Matl is less (preferably 2-3)
2. If you do not know the G/L accounts before hand or the G/L accounts per Matl consumption is too many, then it is better to go for Manual Automatic Account assignment.
In this procedure, at the time of Goods issue using Mvt type 201, you can specify the G/L account and Cost Centre in Th Account Assignment Tab.
Hope this clarifies.
Thanks

Similar Messages

Account keys for movement type 201.

Hi Friends,
Can anybody tell me, what are the account keys (tran/event keys) we will set for movement type 201. And why we are setting that.
Kindly resolve my doubt please.
Regards,
Prasath

Hi
The Transaction Event key set for movement type 201 is WA.
WA - Goods Issue Document.
In the account detemination for movemnt type 201 the Account modifier VBR is assigned for determining the offsetting account for consumption posting
Thanks & Regards
Kishore

Reg. Account modifier for mvt type 601 outbound delivery to customer

Dear Experts
I am doing delivery ( finished goods to customer) using 601 mvt what account modifier is used and where it is assigned in OBYC
settings, Pls help me very soon........
Thanks in advance
Rajakumar.k

Hi,
Account modifier In standard settings will be VAX for transaction event Key GBB under movement type 601,
Regards
Merwyn

Creation of multiple PO IDOCs for multiple vendors in one directory

Hi ,
I got a scenario to download all the vendor related PO and RFQ IDOCs to one common directory .i.e EDI Port path: /sap/xxxx.I cannot create partner profile LI for each and every vendor. Would be appreciated if any one can suggest alternative for this.
P.S : Tried by creating output type with partner function LS and partner profile LS.It was not working.
Cheers,
Raj.

Hi
For the scenario described by you, you need not have to make any config settings. The G/L account defined in SPRO (Valn and Automatic Acct Determination) is used for Automatic Account determination i.e. when you do not enter a specific G/L account during Goods Issue.
As can be seen from your query, you want Consumption account to be posted to different G/L accounts but the material is assigned only to 1 Matl type. There are 2 ways to solve this problem:
1. If you know the G/L accounts that the system should post to before hand i.e at the time of Matl creation itself, then you can configure Split Valuation and then assign more than 1 Valuation class to the Matl. For each of these Valn classes, you can configure Automatic Account assignment. By doing this, at the time of Goods Issue, the system will ask you the Valn type and will accordingly post to a seperate G/L account.
This is possible only if the no of G/L accounts per Matl is less (preferably 2-3)
2. If you do not know the G/L accounts before hand or the G/L accounts per Matl consumption is too many, then it is better to go for Manual Automatic Account assignment.
In this procedure, at the time of Goods issue using Mvt type 201, you can specify the G/L account and Cost Centre in Th Account Assignment Tab.
Hope this clarifies.
Thanks

Account assignment for Movt type 101 and 501

All SAP Gurus,
We want to do the account assignment for movt types 101, 102, 122, 123, 201, 202, 261, 262 accourding to the movement types.
We are aware that the Transaction Key is 'GBB'.
But how to know that which 'General Modification' is used for which movement types.
(in short where we can find this link between movement types and Transaction Key and 'General Modification')
Regards,

To know this first you have to know what does the different general modifications means for GBB:
AUA: for order settlement
AUF: for goods receipts for orders (without account assignment)
and for order settlement if AUA is not maintained
AUI: Subsequent adjustment of actual price from cost center directly
to material (with account assignment)
BSA: for initial entry of stock balances
INV: for expenditure/income from inventory differences
VAX: for goods issues for sales orders without
account assignment object (the account is not a cost element)
VAY: for goods issues for sales orders with
account assignment object (account is a cost element)
VBO: for consumption from stock of material provided to vendor
VBR: for internal goods issues (for example, for cost center)
VKA: for sales order account assignment
(for example, for individual purchase order)
VKP: for project account assignment (for example, for individual PO)
VNG: for scrapping/destruction
VQP: for sample withdrawals without account assignment
VQY: for sample withdrawals with account assignment
ZOB: for goods receipts without purchase orders (mvt type 501)
ZOF: for goods receipts without production orders
(mvt types 521 and 531)
You can also define your own account groupings. If you intend to post goods issues for cost centers (mvt type 201) and goods issues for orders (mvt type 261) to separate consumption accounts, you can assign the account grouping ZZZ to movement type 201 and account grouping YYY to movement type 261
Then go and check OMWN.
Regards,
Indranil

Multiple account assignment for asset

Hi,
I had created PO with multiple account assignment for asset. PO is created with one line item having 5 qty and in multiple account assignment 5 assets are entered with qty distribution.
I have issue with commitment distribution for all the account assignment. when i post migo(GR) the value is posting for only first one asset not for all.
So in the purchase order for the remaining account assignment commitment remain left.
Reagrds,
Umesh
Edited by: Umesh Agrawal on May 15, 2009 6:43 AM

Hi,
1st check in OME9 t.code for account assignment A, the selection of 2(Multiple account ***)in field ID: AcctAssgt Scrn and Distribution field as 1.
Then during PO creation for single line item & in Item details TAB, in account assignment segment, you enter qty with asset number (A1) with G/L account for 1st Line and for 2nd line keep qty. with asset number(A1) with G/L account ( different G/L Account) OR enter qty with asset number (A1) with G/L account for 1st Line and for 2nd line keep qty. with another asset number(A2) with G/L account (different G/L Account)
####Example-1: in account assignment segment , if you have
G/L account----
Asset
12345u2026u2026u2026u2026u2026u2026u2026u2026A1
12346u2026u2026u2026u2026u2026u2026u2026u2026A2
12347u2026u2026u2026u2026u2026u2026u2026u2026A3
12348u2026u2026u2026u2026u2026u2026u2026u2026A4
Having a concept that GR is non-valuated and accounting entries in invoice (without tax) are:
Vendor A/C: Cr
G/L account (12345): Dr
G/L account (12346): Dr
G/L account (12347): Dr
G/L account (12348 ):Dr
#####Example-2: in account assignment segment , if you have
G/L account----
Asset
12345u2026u2026u2026u2026u2026u2026u2026u2026A1
12345u2026u2026u2026u2026u2026u2026u2026u2026A2
12345u2026u2026u2026u2026u2026u2026u2026u2026A3
12345u2026u2026u2026u2026u2026u2026u2026u2026A4
Having a concept that GR is non-valuated and accounting entries in invoice (without tax) are:
Vendor A/C: Cr
G/L account (12345): Dr
Regards,
Biju K

How to create a account key for application type M ?

Hi Guys,
How to create a account key for application type M ? and link the same with
Gl account.
thanks.

Hi
Please create the account keys or transaction keys in
SPRO-> IMG-> MM-> Purchasing-> Conditions-> Define Price Determination Process-> Define Transaction/Event Keys
Thanks & Regards
Kishore

Different Consumption Account for Movement type 201 and 261

Dear All ;
Client want use different consumption account for movement type 201 and 261 .
How we canmap this in SAP
Kindly suggest .
Regards;
Joydeep Mukherjee

This you can acheive by setting account assignment indicator is checked.
OMJJ >>> Movement Type >>>Account Grouping >>Check account Assignment
If this indicator is set, the system checks whether a G/L account or an account assignment has been specified on the item screen when user post transactional data. If so, the system copies this data to the posting line for account determination.
If this indicator is not set, the system always uses the G/L accounts or account assignments determined automatically.

Multiple Account Assignments for purchase/framework requisition

Hi,
Multiple Account Assignments for purchase/framework requisition:
The actual MM configuration is a single account assignment in the purchase requisition (although the option of multiple account assignments exist for trips). What are the implications at GR posting? Assuming that we could use the option for quantity and percentage distribution.
Regards
Suresh

Hi
Multiple account assignment:
Specifying Multiple Account Assignment
This procedure allows you to apportion the costs associated with a PR/PO item (among several cost centers, for example).
With multiple account assignment, the account assignment data entered takes the form of individual account assignment items.
Prerequisites
When specifying multiple account assignment for an item, you must consider the following points:
1.How is the net value of a PO item to be distributed (apportioned) among the individual account assignment items?
The costs can be allocated on a quantity or percentage basis (for example, 10 pieces or 10% of the order value to cost center 100).
2.How are the costs to be apportioned if only a part of the ordered quantity has been delivered and invoiced?
The partial invoice amount can be distributed proportionally, i.e. evenly, among the account assignment items of a purchase order.
The partial invoice amount can be distributed on a "progressive fill-up" basis, i.e. the invoiced amount is allocated to the individual account assignment items one after the other. Only when account assignment item 1 has been charged in full is item 2 charged; only when account assignment item 2 has been charged is item 3 charged, and so on. This process continues until the total invoice value of the PO item is reached.
Procedure
1.When entering an item, specify the account assignment category for the desired item on the item overview screen.
2.Choose Item -> Account assignments.
The account assignment window appears.
3.Enter the account assignment data for the first account assignment item.
Choose Change display to call up the multiple account assignment screen.
4.In the item fields (upper part of this screen) enter the relevant data:
Select the GR non-val. field to designate the GR for this item as non-valuated (as the item has been ordered for direct consumption).
In the Distribution field, specify whether the costs are to be apportioned on a quantity basis or by percentage.
In the Partial invoice field, specify whether the value of a partial invoice is to be allocated to individual account assignment items successively, whereby one is debited in full before a posting is made to another one (in which case, some account assignment items may not be debited at all as a result of a particular invoice), or whether the value of such a partial invoice is to be distributed among all account assignment items in equal portions.
5.For each account assignment item, enter either the quantity or the percentage of the total value to be charged to the relevant account assignment item.
To enter further items with the same account assignment data, choose Edit -> Repeat account assignment -> Switch on. The account assignment data will then be automatically adopted in the next item.
6.Repeat as necessary for other items.
7.Save the purchase order.
A vendor submits an invoice for 60% of the total order value. The cost of the ordered goods is to be divided equally among cost centers 1 - 5 (that is, 20% of the total cost is to be borne by each).
If you specified for the PO item that the value of a partial invoice is to be debited to the individual account assignment items on a "progressive fill-up" basis, cost centers 1 to 3 will each be debited with their full 20% share of the total cost on the basis of this partial invoice, whereas cost centers 4 and 5 will not be charged at all. (The latter two cost centers will not be debited until the remaining amount is invoiced.)
Regards
Ramakrishna

Define Account Grouping for Movement Types??

hi
In account determination the setting in transaction OMWM - Define Account Grouping for Movement Types
The above transaction needs any setting or its standard SAP settings??
Can somebody explain me about this transaction in detail.
Thanks

OMWM is to decide account determination should happen via valuation grouping code or not. SAP standard is with valuation grouping code. I had never seen singe time anywhere it is deactivated.
Account grouping for movemement you can see in OMJJ. (Inside movement type left side). It is also predefined by SAP. You see only account modifier and check acct. assignment is editable. Others cannot be edited.
In case for same transaction if you want 2 different GL account needs to be triggered for same material in same plant, we copy a movemen type and create a new and assign a different account modifier.
Then in OBYC against it we will maintain different GL account.
Hope you are clear
Regards
Antony

Account grouping for movement types

Hai
Can any one explain me in detail about the account grouping for movement types,
in account determination without wizard,as i am unable to understand the lines for each movement types.
If u have any link, pl attach it also.
Thank you

Hi, Please refer the below link.
http://help.sap.com/saphelp_46c/helpdata/en/12/1a39516e36d1118b3f0060b03ca329/content.htm
Thanks,
Venkat

Multiple account assignment for distribution of freight cost in MIRO Transaction

Hi MM Gurus
I have created one Purchase order with multiple account assignment for Asset 'A' in which freight cost is added.
I have done good receipt in which only material document is generated. (No financial document generated).
While doing the MIRO for the same Purchase order I m not able to view delivery cost for the same.
I check this thing in SDN but no concrete solution ..
My question is how to capture delivery cost in Multiple account assignment Purchase roder
Regards
Amit

Hi,
You have done goods receipt for Asset PO but no accounting document created. Now cross check in t.code:OME9 and find GR Non-Valuated check box selected which cause your concern on why your accounting document created for goods receipt for Asset PO!
Check how delivery cost designed for your Asset Purchase, may be in your case - delivery cost added to your asset purchase- which result, you could not find delivery cost in invoice posting!
Regards,
Biju K

Batch does not exist for mvt typ 411 K

Hi Experts,
While i am perform migo for mvt type 411 K,it shows Batch does not exist but i check in MMBE,the batch for this vendor consignment was exist with stock.
Any advice?
Thank you.

How did the batch go into your system? with an initial load program, or with a standard MIGO movement?

The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts.

The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts. I previously was able to select between my Microsoft Exchange Contacts (work account) and iCloud (personal), but both those options are now gone. I tried turning contacts for both off and on and rebooting, but it didn't help. Any ideas?

Just a guess but if the exchange account is from your employer, your employer may have installed a security profile to your device preventing you from adding or editing contacts in the exchange account by removing the Default Account setting. You would need to check with your employer's IT department to confirm this. You could also test this by adding a Gmail account and turning on contacts syncing with Gmail to see if the setting reappears.

GI(Mvt type 201) following a GI(Mvt type 101)

Hi all,
When i do a goods receipt(Mvt type 101) via MIGO, I want to launch a goods Issue(Mvt type 201) just after, like print individual slip.
I tested special function in the output type but it not works
Please suggest any idea...
Thanks and Regards,
Kaw

Checkout these BAdi's see if they meet your requirement.
MB_DOCUMENT_BADI_SAP BADI for Creation and Changing of a Material Document
MB_DOCUMENT_BADI BAdIs During Creation of a Material Document
You'd have to come up with how you want to implement it. The custom program code will go to RESB table with mvt type 201 and look for any item which is
RESB-XLOEK u2260 'X'
RESB-KZEAR u2260 'X'
the moment it finds the first one it will display an information message. Or you can sum up all the quantities to get total reserved quantity and display it in the information message.

Creation of Multiple Account Groupings for Mvt.Type 201

Similar Messages

Maybe you are looking for