Creation of New DS and IS for single IO?

Hi guys,
I got a requirement wherein I should create a new IS and DS for a single IO, and the source for this is a flat file.
And I should create this for an already existing Info cube which has got some IO's and the source for that is from some other system.
Am on 3.5 version. So can anyone suggest me how to go about doing this task. In order to club this new data from the flat file to the info cube?.
Thanks in advance.
Regards
Dubbu

Hi,
Question  1 :
The Data for this single IO should be loaded from a CSV-file.
Answer :  You cannot just load only one IO without attributes, so I suggest u maintain a counter for records as an attribute of this Single IO and then load it .
Question 2 :
Loading the same into Infocube .
Answer :  Its not possible just with your flat file upload data ,
there are two ways of updating this , either you can update it with a routine basing on your requirement,
else you have to prepare a file again with the combination of the other characteristics and then upload the data into your infocube or if you are getting from source map it  .
let me tell you that just loading single IO with a file will never help you in any ways to upload again in to Infocube .
Thanks,
VSK

Similar Messages

  • Creation of new IS and DS for single IO?

    Hi guys,
    I got a requirement wherein I should create a new IS and DS for a single IO, and the source for this is a flat file.
    And I should create this for an already existing Info cube which has got some IO's and the source for that is from some other system.
    Am on 3.5 version. So can anyone suggest me how to go about doing this task. In order to club this new data from the flat file to the info cube?.
    Thanks in advance.
    Regards
    Dubbu

    Thx

  • We got a new pvr and remote for tv from Rogers, now Apple tv doesn't work - how do I reset it to get it working

    We got a new pvr and remote for TV from Rogers, now Apple tv doesn't connect, how do I get it connected again

    Restore your Apple TV (2nd & 3rd generation)
    I don't recall off the top of my head, but there may also be a reset button on the rear of the unit, probably recessed.

  • I bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

    You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
    See the Activation Lock FAQ for what you and they need to know.

  • HT5429 I have recently returned from a holiday in New Zealand and transited for 6 hours in China. Since returning to the UK my maps app on Iphone 5 will not show my surroundings in hybrid or satellite. How can i get this back?

    I have recently returned from a holiday in New Zealand and transited for 6 hours in China. Since returning to the UK my maps app on Iphone 5 will not show my surroundings in hybrid or satellite. I have also noticed that the data from section that usually displays data from TOM TOM and others now just says others. Has anyone encountered this before or know how to get the Satellite function on maps back?

    Your phone is "stuck" in the Chinese version of maps. This also happened to me once I got back from China recently. I believe I solved the problem by logging out of iCloud and reloging in.
    BTW the App Store app was also stuck in China. It only displayed Chinese characters and I had to log out and relogin.
    Hope this helps.

  • "Unable to connect to server" when trying to accept the new terms and conditions for iCloud.

    I keep getting "Unable to connect to server" when trying to accept the new terms and conditions for iCloud.  What can I do?  I can access the internet, but my clash of the clans applications is failing.  The problem started January 1, 2014

    I just figured out the problem with my grandma's iphone.
    Settings>iCloud>Delete Account
    IT WILL NOT DELETE YOUR ACCOUNT. it just takes it off the phone. then you can log back in, and BAM, You're good   I hope!
    Hope this helps.

  • Pros and Cons for single sales organization and multiple sales organization

    Hi!
    Does anybody have a good data of Pros and Cons for Single Sales Organization vs. Multiple Sales Organization.
    Thank you!

    Hi,
    Actuall it all depends on the business process.
    I will explain the answer to you through a practical example
    like Ford, it has sales and services all across globe.
    It is not advisable to manage all of its activities under only one sales organization, say Ford Inc.
    So what it does is de-centralises the whole process according to the country, region so that the whole process is divided and hence can be managed more effeciently.
    Hope this helps you in understanding the basics.
    One sales org always provides you with very less data to update and maintain, while many sales org makes the scenario more complex.
    One sales org always gives you the flexibility to bring any changes to the current scenario, while in multiple sales org to bring a change its a tiresome job.
    These are some of the advantages and disadvantages of one to many sales org.
    regards,
    Siddharth.

  • Security Approach and Plan for single logon for Essbase and Reports.

    Please any one can suggest me, how can I do the Security Approach and Plan for single logon for Essbase and Reports by using Maxl or Administrator.If any one have code,please forward to my email Id: [email protected]

    Once you are logged in to the "Hyperion Portal" as you call it, your user credentials are automatically passed among all the components. Therefore, a lot of the logic you created to pass credentials between BQY files in a desktop environment are no longer needed.

  • "RUNSTATS and REORGCHK for single table" in DB13

    Hello,
    Our system is ECC 6.0, SAP_BASIS is SAPKB70011.
    "RUNSTATS and REORGCHK for single table" in DB13, I found the parameter, "Parallel Jobs".
    Why there is this parameter? Can we execute parallel runstats for single table in SAP environment?
    Thank you very much and best regards,
    Takae.

    Hi Takae,
    Although this DB13 job is named '.. for single table' it can process more than 1 table if you use wildcards. And only in this case parallelism makes sense, because the job cannot parallelize the runstats for one table but only parallelizes the runstats execution for different tables. Technically this is done be creating further background jobs in the SAP system.
    Best regards
    Ralf

  • I bought a new battery and charger for my macbook 13" and the battery wont hold a charge what can i do

    i recently bought a new charger and battery for my mac book and it wont charge what can i do

    Click here and request assistance.
    (74911)

  • I have a new email and password for Icloud and cant sign in Ivloud accounts. It say connection error on my laptop. Had it before on my laptop.

    aI have a new email and password for my Icloud account and have a HP Pavillon laptop. Cnt sign into Icloud/ It says connection error! I had Icloud on my HP Pavillon before.

    I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
    The old email address no longer exists - I haven't used it in a year probably and I no longer have the account.  I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there.  On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back.  Every 2 seconds I am asked to log in using the old non-existent email.  The device is currently useless.
    The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
    Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

  • I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

    I have an iphone that has stopped charging. I have purchased a new battery and charger for it but it is still not charging. Does anyone know how i can fix this?

    That pretty much eliminates all the user-serviceable parts the phone has.
    When you say you purchased a new battery, I'll assume that it included the installation and you did not go fiddling with the nanoscrews and such. So it's got to have some sort of warranty that the part is good and it is time to take it back for service.

  • Adobe air with flex, file new, open and save for Desktop software program

    I already have a headache from all the searching. I cannot believe this to be such a confusing topic as every software program we create must be able to save user input, right.
    Here is the problem:
    Novel writing software program Main window has tabnavigator with four navigatorcontent pages 1. characters, 2. worlds, 3. objects, 4. Editor
    Each navigatorcontent page has user input fields in the form of textinput component, textarea component, richtexteditor component, etc.
    problem 1:
    The user needs to be able to open a new project and give it a name and state where it must be saved. All user input in the Novel writing software program must be attached to the file name the user specified - cannot give sample code cause I don't even know where to start looking anymore.
    Problem 2:
    If the user has now defined a new project name, all his input from the different input components has to be compiled into a single file that can be saved. (Dan Pichelman gave me a satisfactory answer on using the file.borwseforsave funtion.) That makes sense, but I first need to get all the user input into that single file. I was convinced that it must be an xml file and that there would be a guide on how to do this but...
    Problem 3:
    This brings me to another problem. All the pages I've researched so  far tell me how to load data from an xml file into a component, but not how to write the text from the component into the xml file. And this xml file cannot be the prefs file in the storage directory, it has to be named by the user and then after filling in all his text in the different tabs of the software, must be saved in this xml file and saved where the user chooses.
    Problem 4:
    now that the user put in his text and it is written to an xml file that he has named and set the path to, he goes on vacation and in two weeks opens his saved file to work on his project again. All the data that was stored in the xml must now be written back into the different user input components so he can continue working on his project, truth be told, there are some samles and tutorials on this subject, but again from only a single page perspective not a multiple tab perspective.
    Problem 5:
    Now the user has deleted and/or changed some text he put in when he started, he wrote some more text in the textareas and texteditor and he clicks the file - save button. The xml file or whatever needs to be used must be updated and saved with all the changes overwriting the old file.
    Problem 6:
    The data entered by the user will end up being a book of say 400 pages. This data will obviously be mostly in the richtexteditor component, so whatever method of saving is used, database or xml or whatever, needs to be able to contain all this data.
    Thought, if you are working with for instance, microsoft powerpoint, it has multiple pages all containing different user inputs and when you click flie - save, it saves all that input into one file. When I as a user opens that saved file it loads all that content back into its place and I can change and manipulate the input and save it again. I would have thought this would be one of the first things adobe or any other software would teach as this is what sofware programs are all about. But alas, the tutorials on this subject for adobe air for Desktop application is extreeeeemely rare.
    My promise is, if someone can help me with this or there is a tutorial out there that covers this properly I  will write a tutorial on this for other newbies as I progress step by step.  
    Pleeeeeeease help this ignorant novice
    Regards

    to save a file you would do something like:
    FileWriter fw = new FileWriter( fileName );
    textComponent.write( fw );
    fw.close();See the JFileChoose API for filtering files by extension. The API gives an example.

  • Creation of new package and request number.

    Hi frndz,
    Hope everyone are doing fine. Coming to my query, its quite simple for you guys.
    But me being new to BW, I would like to know how to create a new package and request number.
    And I have a task to create a new IS and DS also. So do i need to create these new package and request number separately or at the time of creation of IS and DS.
    Please give me clear idea.
    Thanking you.
    regards
    Dubbu

    Hi Vinay,
                   I hope you are speaking about Package to collect Objects and collecting them in Transport Requests.
    Usually you use the same packages for all the objects. According to requirement if you want to create the Package you can goto SE80--> There you can create a New Package. Give Transport layer as SAP. and Activate it. Then you collect the package in a Transport Request. You can create the request by the create button on the screen when it ask for Transport Request.
    While creating the Infosource or other objects you mention the package which you have created while saving and you can use the existing TR or new TR for collecting them.
    You can use RSA1---> Transport Connection to collect the objects easily to TR's
    Regards
    Karthik

  • I am trying to use itunes, it will not open at all, have uninstalled and downloaded new software and 64bit for windows. i have an old ipod nano from about 5 years ago. anything i can do, even to view my purchases and watch/listen to music etc?

    ok i have a advent roma laptop with window 7. my itunes used to work fine, completely. every time i plugged in my ipod it was ok. recently my ipod was not working so i never bothered with itunes, however i have movies/tv prog that i purchased and would like to view them. i have an ipod nano from about 5 years ago, the problem with thet is, it switches on, but the circular control panel does nothing, all you can do is lock and unlock it - nothing else.
    i tried to download new version of itunes, then uninstalled my origonal version, incase it was corrupted etc, i then again tried to down load new version and also version that is windows 64bit. still when i select the downlaod to open as son as it is finnished nothing happens. and now my desktop shortcut has dissapeared. before when it was there, id double click it, nothing, right click to open it, nothing.
    im not the best technically minded but i just dont see what im doing wrong here, please help

    Perhaps it would be helpful for you to view the page source code of this page
    http://www.alanwork.com/
    As you can see, the submenu code links are immediately below the top level code, and are
    wrapped in their own  <UL> </UL> tag pairs.
    Hope that helps

Maybe you are looking for