Creation of new employee groups and sub groups

Hi All,
What all the steps should I follow to create new employee groups and sub groups? and How many structures should I create for this?
Its urgent pls.......
Good replies will be rewarded!!!!
Regards,
Sita

Hi
You can create the employee groups depending up on your clients requirement, Eg: Permanent, Temporary, Seasonal, Trainee, Advisor etc
And define the employee subgroups and assign them to the employee groups Like
Enterprise structure>Definition>Human Resource Management-->Employee Groups & Employee Groups
Enterprise structure>Assignment>Human Resource Management-->Assign employee subgroup to employee group
you can create employee subgroups depending up on your requirement like asst manager, manager, GM, MD, VP ETC an assign them to the employee subgroups ok.
Ensure that certain empployee subgroups may not be assigned to employee group based on requiremen, but create all the employee sub groups which is existing in the organization.
Regards

Similar Messages

Change employee group and sub group

Hi all,
During the new hire if an employees group and subgroup are enetered wrongly, how shouldl they be corrected. We have scenarios when the emplooyes group and sub group are corrected after a month or so and the users want to correct the same
How do we do it?

Goto PA40 reselect the same Hire action for this employee and click execute. In IT0000 screen enter the new EG/ESG.
and save it. Then Save the IT0001, then fill rest of the infotypes.
If you have already process the payroll and the new Emp group / Sub group is in different payroll area you wont be able to change it.

Singapore - Employee Group and Sub groups

Hi Gurus
While making employee groups and sub group for SG what factors should one keeep in mind??

Hi,
When we are assigning the employee groups to sub groups select 25 singapore country allowed in the table V_T503Z.
that factor we need to remember.
Good luck
Devi

Defining / Assigning Employee Groups and Sub Groups.

I have defined a Personnel Area for e.g Barron Hotels - London BH01 and Barron Hotels - Manchester - BH02. I have also defined there respective Personnel Subareas.
What exact steps much I take to define the Employee Group and Employee Sub Groups and how do I link (Assign) them to corresponding the Personnel Area and Personnel subareas defined above.
Can some one please show me the exact steps. I have heard SM30 and V_503_ALL mentioned but how exactly are these used.
Many thanks.

Hi Tomuri,
There is no link between EG-ESGs and Personnel Area -Subareas.. All these form an Enterprise Structure for an organisation and it can be seen against an employee in IT0001 - Org Assignment.
Well, you have created PA as well as PSAs. Now what you do is, similarly create EG- ESGs.. say for example..
Emplyee Groups as A- Associate, B- Managers... etc...
Employee Subgropus as A1, A2,.. B1, B2.. etc...
Path: IMG-> Enterprise structure->Definition->Human Resources Management-> Employee Groups and
-> Employee Subgroups
When you create Personnel Areas.. you need to assign them to a Company Code...
Path: IMG-> Enterprise structure->Assignment->Human Resources Management-> Assign Personnel Area to Company Code
Similarly, when you create Employee Subgroups, you assign it to Employee Groups (EGs)
Path: IMG-> Enterprise structure->Assignment->Human Resources Management
-> Assign employee subgroup to employee group
Next is the table you mentioned in your query... V_503_ALL... this clubs the groupings for -> ES grouping for collective agreement provision, Employee subgroup grouping for primary wage types, time quota types, work schedule etc,,, these are according to company requirements..
For any further queires, do reply...
I hope the information proveded helps you...
Award points if the query was resolved...
Good luck..
Regards,
Shweta

Page break for a group and sub group based on page length

Hi
I have a requirement where in I need to develop a report which has the following requirement. I am attaching the sample xml and rtf files for reference:
1) There are 3 groups in the Data Model. G1, G2 and G3. G1 contains G2 and G2 contains G3. I need to display that data in that order in the rtf template. Pretty straight forward.
2) The tricky part, however, is that the report needs to have a page break on the following conditions:
a) When the value of col1 changes which is in G1
b) On col3 (in G2), but only when there is not enough space on the page to accommodate the values present in G3, ie col5 and col6 alongwith the values in G2. This means when the value of col3, which is present in G2, changes and if there is not enough space to accommodate G2 and G3 on the same page, it should break and start on a new page. The table which should come together is marked in grey color in the RTF template.
What I have done till now to achieve this?
I have created a parent table with two rows. In the second row I have made sure that the row doesn't break across pages. This is true for all the subsequent tables in the report. Now, in that second row, I have col1 in a nested table within a repeating group G1. Inside G1 there is a nested table for G2 and within G2 I have another table for the group G3. The row is not breaking across pages for all the tables that have been created.
I have tried all the permutations and combinations of nested tables, keeping G1, G2 and G3 in the same table but different rows, having G1 in one table and nesting G2 and G3 in another, keeping G2 and G3 in a separate table altogether, Keeping G1, G2 and G3 all of them in the separate table. All of them are apparently not working.
Is there anyway where we can either get hold of the current position of the cursor and the total number of rows on that page? Or any other solution that is possible? Or if I can have to make changes in the data model?
Thanks a lot in advance
Sid

Hello Sid,
I have checked your report and XML Sample and you haven't linked the fields from XML Sample to your .rtf report.
You can use <?for-each?> syntax for your groups to print the content.
I recommend you to review our "Creating RTF templates" manual:
http://docs.oracle.com/cd/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#BIPRD2354
Regards,
Liviu

Primary Group and Additional Group in Solaris 10

hi!
We've just freshly installed a Solaris 10 system. I'm very new in Solaris. There's something i noticed, and i'm not sure whether is that normal.
In the user screen in solaris management console, i notice that i'm not able to see the Primary group and additonal group list. What i can see is only the Primary group in ID format. I'm able to see it only the first time when i launch the Solaris management console or switch from one workplace to another. After right clicking on the user properties for the second time, it disappear and show only the primary group id in integer. On the left hand side of the screen, it says "The group cannot be listed. You can change the primary group 10 to another valid integer. Because of error or oversight, group membership cannot be found. You can enter a number for the primary group, but cannot choose from a list of groupnames. Also you cannot choose Seconday Group until the group info is available". "Check group files, NIS maps, or load for possible corruption. If you have not already populated appropiate files or maps, See administrator guide, Naming and Directory Services(DNS, NIS, LDAP) or docs.sun.com for LDAP see also Solaris Management console help, about the toolbox editor to manage LDAP"
Is that normal? What could be wrong here? Please advise. Thanks.

hi! Anyone can provide advise on the issue i encountered?

Default excise group and series group issue

Hi Gurus
I have a doubt. Is it possible to maintain the default excise group and series group in this order
sales org     dis chnl    division    ship pt    plant    excise group    series group
1000               EX         CD             1000     1000       10                       A1
1000               EX         CD             1000     2000       20                       A2
i tried this combination, but getting the error message that a key already exists....The header data sales area and shipping point already exists.... I cant understand why we cant give the same sales area and shipping point for a new plant combination
Thanks in advance
Mathan

Hi Mathan,
When we say Excise group then it is maintained for the plant as it is maintained with Excise authorities. We can have same shipping point for 2 different plants but the possibilities are less and when 2 plants share the resources and facilities then those plants are registered as a single excise entity with the authorities. That is the reason that the option of having the same sales area and shipping point as header data is not allowed for more than one excise group. This is more business related than SAP.
Hope this clarifies the doubt.
Regards,
Antima

Valuation Group and Tolerance Group - FS00

Hi all,
Can someone please tell me what the field 'valuation group' and 'tolerance group' are used for? I've found a brief description online, but if you could provide me with an example that would be great.
thanks,

Hi
We will use Tolerance group for below mentioned activities
the maximum document amount the employee is authorized to post
the maximum amount the employee can enter as a line item in a customer or vendor account
the maximum cash discount percentage the employee can grant in a line item
the maximum acceptable tolerance for payment differences for the employee
For Valuation Group suggest you to refer below links
Valuation group code in Account determination?
Regards
Praveen

Customer group and price group mapping

Hi All ,
I want to know where do we set the mapping for the customer group versus price group in the system .
Is there any customizing t-code for this?
Please advice.
Thanks in advance,
Swati

Dear Swathi,
There is no T-Code for Setting Customer Group and Pricing gorup in Customizing
But we assign generally this two in front end due to requirements,
like we consider in this two in Pricing condition creation in VK11, here suppose we maintain Key Combination in Customer Group and Pricing Group then we consider
Hope this may helps you
Prem.

What is meant by article grouping and site grouping and how to define

what is meant by article grouping and site grouping and how to define in SAP.

Hi Charan,
Article Grouping in its broader sense means grouping of Articles for ease of maintenance and business functions, either on the basis of Hierarchy or on the basis of Merchandise Category.Article Grouping is also primarily useful in promotions,wherein you can define a set of articles(which may not necessary fall under the same MC or Hierarchy) and club them together and assign them in a promotion.Txn codes used are : VBG1/2/3 - Create/Change/Display Article Group
For more information refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Site Grouping is used for ease of maintenance by grouping the sites.It is also used to maintain the characteristics as well.This can also be used in Allocation Tables,promotion and Listing etc
Some of the Txn codes -
WB50 - Site Group,Create Alloc,.table
Wb56 - Site Group, Alloc.table,Maintain Sites in Class
WB60 - Site Group,Create Promotions
WB64 - Site Group,Maintain SItes to Class
Wb80 - Create Site Group Other
For more information,refer the link below
http://help.sap.com/saphelp_47x200/helpdata/en/12/08485c470311d1894a0000e8323352/frameset.htm
Hope it helps
Rgds,
Aram K.
For more information refer to the link below

Very Urgent Extn.Material Group and Material Group.

Hi Guru's,
      I was created Generic D.S Using table (AFRU) for Orders Confirmation.I was Created Info Source AND ODS.
     I nedd to maitain ODS Extn.Material Group and Material Group.but These fields are not Avilable in Data Source (AFRU Table not having).
    Data source having Field AUFNR (order number) I was mapped To BW Object 0prodorder. I was maitained master data for 0prodorder.
0prodorder master data (0prodorder_attr) having 0material (PLNBEZ Field mapeed to 0material) as a navigational Attribute.
i am asking to all is it possible to bring Extn.Material Group and Material Group update rule level using master data attribute option?
Please help to me Above issue.it's very urgent.
Thanks & Regards,
Guna.

Hi Manju & Gopi,
    This Order Confirmations cube having data from 2 data sources.
    There is a performence issue to clubbing so many tables.
     Any way i was maitained 0material is attribute(Nav Attr) of 0proorder.i was loaded 0prodoreder master data.
   0material having master data .Extn mat group & Material group are Nav Attributes of 0material.
Now is it possible to maitaining the data in cube Extn mat group & Material group ?
Please Give me Suggestion with out adding another table using view.
Thanks & Regards,
Guna.

Creation of GL account under main group and sub a/c group

my name is swetha,
my clint is asking for creation of GL account in the following manner
under   account group a sub account group, and under sub account group a GL account .
like
account group (ex: loans)
      sub account group (ex: vehical loans)
           GL account       (ex: HDFC bank GL vehical loans)
could you please help me to configure if it is possible, if not plz suggest me the alternate options. thanks in advance.

hi Swetha,
one thing remember u can create all G/L Accounts as one Group but these sub groups are define in FSV so you can tell them first we can create on group that is loans but at the time of FSV u can define number of sub groups because gl master account groups are using for number controlling purpose only.what ever groups u are define in FSV that groups only comes at the time of reports ok.

Nexus 1000V and sub-groups

Hi,
I have a questions about the number of subgroups in Nexus1000V. I can use sub-groups with an ID between 0-31.
Does it mean that I can have only 32 subgroups for all my port-channels ? Or can I use the same sub-group-ID for interfaces that are in different port-channels ?
Thanks
Hendrik

You can use same sub group id for interfaces that are in different port channels. Sub-groups are local to a port channel. Hope that helps.

How to Add content like on ie8 mymsn? The fox new groups and sports group from fox

On mymsn in ie8 I can have different sites such as fox news grettawire fox golf news, NFL news, NASCAR news, PC mag and many others. I would like to try firefox but do not know how to customize it.

Hi,
SEM-BCS or BI-BPC NW 7.0N is meant for similar kind of requirements. You'll probably need to get a functional guy involved for mapping the GL accounts from the new company to your existing one and have journal entries for inter-company transactions. After doing the same you can then consolidate both the data and have a common output.
search about BPC or BCS and you'll find out more. If you still need to do it in existing BI setup then get someone from FI and set the mappings of GL Accounts from both set the business rules and create a new cube to load the consolidated data.
Hope this helps
Regards
Raj

When is a CustomNode a Group and a Group a CustomNode ?

Forgive me for my greeness here, but..
Items like area panels (left panel, nav panel) etc. would be classified as a Group, by definiton, as it will contain numerous sub elements
However, items such as custom buttons.
If they are declared as a CustomNode they return a Group object anyway on the overriden Create
But I also see examples where it is simply defined as a Group initialised with content which graphically represents the button and the event functions to trigger.
So, is there a solid distinction to determine what should be classified as a Group and what should be as a CustomNode ?
Is the only main difference the ability to apply a transformation more easily ?
Or am I missing the point completely here ?
Cheers
ScottyB

Yes, it is unrelated, you should have made a new topic, perhaps linking here if you feel it was relevant (at least you made a search before asking!). Even more as this question is marked as answered!
Anyway, you make a mistake many JavaFX coders do: you bind to a function call.
It doesn't work. At best, you can do: var x: Group = bind getAGroup(param); and then the binding will be against param: when it changes, the function will be called again and the result affected to x.
But otherwise, the bind has no way to know if it must call the function again to see if the result will change...
Otherwise, the answer to your first question is: yes, group's content is automatically displayed in the scene.

Creation of new employee groups and sub groups

Similar Messages

Maybe you are looking for