Creation of new functionality in the mail

hello sir,
i want to know whether it is possible to create a folder in the mail which should to work as follows.i will assign a particular mail-id to a new folder
for ex: [email protected]
folder name: abc.
whenever a mail comes from this mail-id [[email protected] ] those mails should be automatically come in the folder which we have created for that mail-id. if it is possible let me know from where should i start in creation of this applicatio.please it is for my curriculum project.

Similar Messages

How can i add a new function to the Basic IVI class vi's?

I need to use the IVI vi's to control some instruments, let's say a DC Power Supply.
Since there's a DC Power supplyclass, i can used those VI's but waht if one of the VI's does not contains all the functions that i need?. How can i add more functions to the IVI classes?. What do i need to do to add a new function to the iviFGen class?

If you would like to try developing your own instrument driver (or modify the existing one), we have documentation, model instrument drivers, and driver templates to help at :
http://www.ni.com/devzone/idnet/development.htm
We also have a syndicate of third party vendors that specialize in National Instruments' products and services. Some of the vendors specialize in driver development. I would suggest contacting one of the Alliance members at:
http://www.ni.com/alliance

I got my New iPad in the mail yesterday. I imported my photos and videos to make a short movie. The photos had lost all their original quality. Is there any way to import photos without losing quality?

I got my New iPad in the mail yesterday. I imported my photos and videos to make a short movie. The photos had lost all their original quality. Is there any way to import photos without losing quality?

If you mean "optimizing for iPad," no.

I have a new BB and the mail accounts i used to have in the old one doesnt work!!

Hello!!!
2 weeks ago someone stole my BB curve 8520.
I reporte the robe to the mobile company and to the assurance.
Since 4 days i have a new BB (curve 9300), with other company in other country.
Im trying to vinculate my mail accounts (the ones i used to have in the old one) to the new BB and it doesnt let me, it shows me a message telling me im putting the wrong mail or password.
I tryed to vinculate a new account that i didnt use in the old BB, and there was no problem.
So i dont know how to desactivate the vinculation of my mail accounts from the old BB for being able to use them in the new one.
Thanks,
Karura ^_^

Note to all -- duplicate...follow thread here:
http://supportforums.blackberry.com/t5/BlackBerry-Curve-3G-BlackBerry/Change-of-BB-and-the-mail-acco...
@karura -- please mark this thread as solved and use only one thread for this issue.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

[Web Dynpro]How to add a new function in the implementation of a view?

Hi, all,
   I'm trying to add a inputfield check method in the viewname.java , the method is used to check all the 12 inputfields in the view, at least one inputfield should be filled.(Is there any other methods I can use to do this job?)
however, when I clicked the save meta data button, the function disappeared from the viewname.java. The import statements were still there and showed that they are never used...
   Could you please give me some hints to avoiding this?
   I want to save my function in the viewname.java.
Thank you in advance.

Hi folks,
I'm somewhat new to WebDynpro and when I want to declare my own methods I generaly put them at the bottom of the file underneath the comment;
   * The following code section can be used for any Java code that is
   * not to be visible to other controllers/views or that contains constructs
   * currently not supported directly by Web Dynpro (such as inner classes or
   * member variables etc.). </p>
   * Note: The content of this section is in no way managed/controlled
   * by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
This way I can delare them as private methods for the class. Am I wrong in saying that anything you declare in the 'Methods' tab will be public?
Since I'm new to WebDynpro I don't know all the best practices so any clarification here will be appreciated.
Regards,
Patrick.

Lost iphone, new one in the mail. Can I get unread texts?

I lost my iphone and I'm waiting for my new one to come in the mail. Will I be able to retrieve the texts I received while my new phone was in the mail? it has not been activated. Thanks

Restore the new iPhone from the most recent backup of the old iPhone.
Everything will then be as it was on the old iPhone at the time that backup was created.

My Mac Pro stopped getting new emails through the mail app

My Mac pro does not get new E-mail from yahoo, I'm using the Stamp app at the bottom of screen. I can access my E-mail if I go directly through yahoo. Can anyone help.

1. This is the MacBook Pro hardware forums.
2. Post in the Mail & AddressBook forum of the OS you are running (which you don't mention).
3. So for Lion post here: https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386

Creation of new plant and the impact of business

Hi to all
i am creating a new plant, and would like to know the impact of the plant, what are the changes to be made in the customization, i want to know what are the chages required, and let me know after unit testing and integration testing what activity to be performed, as i am at go live stage and in the production client how to extended the master data, what is data migration how it can be done,
thanking you

Hi there,
As an SD consultant, these are the things you need to take care.
Assign the plant to the company code in OX18.
You need to assign the new plant to the sales org / distribution channel in OVX6.
Then assign the shipping point to plant in OVXC. If WH is active for your plant, then assign warehouse WH to plant & storage location in LE assignment.
Reg the master data, you need to assign the material master to the new plant. Also maintain the MRP profiles, plant specific data in the MM01.
Maintain the shipping point determination in OVL2 & storage loc determination in OVL3 (OVL3 if required)
Check with MM, PP & FI if they need to maintain any plant specific configs. There are some configs from their end for sure. For eg for production orders, purchase orders, movement types etc.
Reg the testing, you need to ensure that plant gets proposed automatically when a new sales order is created. Also maintain the relevent plant specific condition records.
Similarly when PGI is done, it should update the transfer postings in MM & FI w.r.t plant.
Even tough your project is in final stages, you have to do a regrious testing when a new plant is created. Testing cannot be compromised for time lines. It will lead to serious production issues if tsting is not properly done.
Regards,
Sivanand

WWYD: Battery is better today, but I received a new phone in the mail already...

I'm a first-time iPhone user (own other Apple products though). I ordered a 4S on pre-order day, received it on release day (via mail). Immediately I noticed that the battery life seemed poor, and I had other problems as well (when calling another phone on my account, the caller could never hear me). I know of 3 others with a 4S who have had NO problems whatsoever, great battery life from the get-go with very heavy usage. I was advised by one of them to do a restore. It took two restores to get the call problem cleared up, but the battery life was getting worse and worse. I read the forums and followed every bit of advice and did almost nothing but make a few phone calls. I let the battery run down completely at least 3 times, probably more. It was essentially a phone, nothing more, and the battery would not make it through a day of light use. I reset everything to a new phone at one point, still no change. I called Apple support who advised me to return it to Verizon since I had a 14-day return window.
The new phone arrived a couple of days ago. I didn't have time to set it up right away, so I was planning to yesterday. But suddenly, the battery doesn't seem to be draining as before. I've cautiously started using it more and adding apps and using things like email. When I do some calculations, it still doesn't seem that it is living up to Apple's specs, but a huge improvement over before. (*The one thing I noticed that changed after a charge (not from 0), was that my Usage & Stand by times are no longer identical; they now seem mostly accurate. Why would this suddenly change?)
My question is, do I return the new phone and stick with the original, or do I open the new one and hope that it works fine out of the box? My concern is that even though the original phone seems to be doing better now, (1) I've read about others here who thought their issue was resolved and then the problems started up again and (2) with all of the issues I had up front, perhaps there is something flawed with this specific phone, and I'll be looking at other issues down the road.
I don't want to end up with a worse phone than I have now, but since I know others who had zero problems from the start, I know it's possible, and I guess I'd feel more confident going forward if my phone didn't need so much work to get it in working order.
Thanks for reading, I didn't mean for this to be so long...
ETA: I am aware of the announcement that Apple is going to release an update for battery issues.

You aren't serious are you? Send it back. It is not yours, you do not own it, therefore selling it would constitute selling stolen goods. You would be committing a crime, and you would be screwing whomever you sold it to.
GB

DBM Creation of New Vehicle and the relationship with Valuation Class

HI SAP,
I'm having problem when creating new vehicle in /DBM/VM. The Valuation Class that i use for VEHI is 4010. when i click
on save the system show valuation class 3200 not allowed for material type vehicle config. i already check my valution class
configuration, My Materia Type VEHI does not link with 3200. how do i resolve this issue ?

Commander Sauk,
From the error message it appears that valuation class tied up with your vehicle model is 3200.
Is it a very new model for which no vehicles created so far?
Can you please post accounting 1 view of material too showing valuation class as well as valuation category settings?
Please also check split valuation is correctly setup for plant you are selecting for vehicle.
check and reply with findings.
Thanks
Ritesh

How to add a "new" icon to the Mail toolbar?

When I open an email in Apple Mail, I often file it in one of many folders in the left-hand pane. I frequently use two monitors, and if reading mail on the attached monitor, it becomes tiresome to keep returning to the menu on the original monitor to select Message > Move to > (find folder and drop it in) ... for that matter, it is tiresome to return to the menu bar on the same monitor, as well.
Of course, my other option is drag and drop after closing the email or reading it without opening to allow me to select it and drag it to the correct folder.
My preferred solution would be to insert a "Move" icon on the toolbar and after reading the email, select the icon which would provide the same drop down list of folders as Message > Move to > . However, after the email is dropped in the folder the next (or previous) email would open in its place, depending on how I selected the configuration for this option.
Is this an operation I could create in Applescript, or is this a bit more complex than Applescript is meant to handle? I have not been successful locating a plugin for Mail to accomplish this task.
Being a web designer, I have a scripting (javascript, PHP, etc) background in addition to a past life as a programmer. This is something I would like to tackle myself if reasonable; however, I would like to know what I am up against. If I need to learn a bit of Cocoa and the IDE, so be it.
Thank you in advance for any advice and/or assistance.

Wynnefield wrote:
I have several rules moving targeted emails into specific folders; however, this does not accomplish the task I am attempting to perform. The "control-click" only works on unopened emails, and I prefer not to close the email to have to move it.
This question is really two-fold:
1) Can I place an icon on the toolbar if that icon is not an available choice in the "Customize Toolbar" selection from control-clicking on the toolbar? or can I add an icon to the available choices?
I'm quite sure that the answer is no. as i said if it's possible it would require hacking Mail and you'd have to ask in the Developers forum (it's under OS X technologies) about that.
2) Is there a way to configure Mail so when I Delete or Move an open email, instead of the email just disappearing, the "next" or "previous" email in the Inbox would open in its place?
no.
Message was edited by: V.K.

My iPhone broke and I had to disable it by deleting it from 'Find my iPhone' when I receive the new one in the mail, will I be able to back it up to the backup I made before I deleted it from 'find my iPhone'?

My iPhone stopped working so under my insurance they are sending me a new phone. They asked that I erase it from Find my iPhone so I can send it back and so i did that and now my macbook air FaceTime and iMessage isn't working. My prime concern is about if the backup from iTunes still work so I can backup my new iPhone when I receive it. there were a lot of important things on it.

There should be no reason you cannot restore your replacement phone with the backup that you made from your old phone.

HT3702 I had to place a stop on the cc on file with I tunes and Ive yet to rieceve a new replacement in the mail.I ow find Im unable to dowload "free apps". why is this?

I needed to close the cc I had n file with Itunes. A replacment card is on its way via mail. i am unable to dowload "free apps". Why is this if thed poroduct is "free"?

Hi:
According to the service manual for your notebook at the link below you have the choice of 2 batteries.
Please see chapter 3, page 3-8, item 16. Part # 593554-001 would give you more time between charges.
http://h10032.www1.hp.com/ctg/Manual/c02542455.pdf
You can order either one at the link below.
http://h20141.www2.hp.com/Hpparts/Default.aspx?mscssid=898770C04DED4DA28D5C1F34CBF9EA5D
Paul

I got a new phone in the mail and i want to get my pictures off of my old one (doesnt turn on at the moment). Also isnt there a way to restore my settings onto the new one? settings that were on my old one?

My girlfriend got a new phone recently as well and she was able to click something on her new phone that allowed all the setting pictures texts and etc to transfer to her new phone, even though her old phone was unaccessible. How do I do that for my phone? It's the same circumstance. I dont back up my phone like she does but I dont think she had done a recent backup before her phone died either. Someone please help!

You transfer the data (including text messages) and settings from your old phone to your new one by backing up your old phone and restoring this backup to your new one (see http://support.apple.com/kb/ht2109). This must have been what your girlfriend did.
If you never backed up your old phone and it doesn't work now, it's too late.

Creation of new field with the absense of user exit

Helllo Abapians,
For one of the T.Code , i dont find any user exits for that T.code.but one customized field is there to that T.CODE.
How it is possible???

hi,
Plz refer to the program on the link to find the user exit.
http://www.erpgenie.com/abap/code/abap26.htm
Regards
Sumit Agarwal

Creation of new functionality in the mail

Similar Messages

Maybe you are looking for