Creation of new Init
Hi Experts,
We have existing delta infopackage which loads data into one cube.
As it is taking long time to extract data So we decided to split it using data selection field.
Could you please tell me the steps for creating new inofpackage/s with different init selection without deleting existing data.
What it will affect to eixiting data, Will it overwrite OR do I need to delete old request.
Thanks .
Hi ,
Am I missing something...
I was loading using delta into cube since long time ..
My current init infopackate setting has no selection
Now due to larrge time take by data extraction we need to split into 3 info package with delta means will have 3 data selections.
I knwo that first I have to delete init select then create three init infopackage with the required data seletection ..
Question is when I will create 3 delta on above three init infopackage ..how the exptraction will behave...what wd about my prev data....is it going to double entry..
or what shd I do ...
if I am missing then please let me know and please let me know correct process
thansk
Similar Messages
-
How deactivate SAP* after inital logon and creation of new users
Pl help me to deactivate SAP* after inital logon and creation of new users.
Regards
JyotirmoyHi,
log on (as sap* to the portal) and navigate to system administration --> system configuration --> user management configuration --> data sources.
There you should find a dialog for (de-)activating sap*.
note that the navigation path could be slightly different (my portal ist set to german, so I translated the path on my own).
Regards,
Dominik -
CUP - Issue regarding creation of New SAP ID in CUP.
System : SAP GRC 5.3 SP 12..
We have requirement where in we need to design a workflow for creation of New SAP ID.
The Naming convention followed for SAP ID is FIRST LETTER of FIRST NAME and LAST NAME with maximum 8 characters.
For Eg
JOHN SMITH would have SAP ID as JSMITH
JERRY SMITH would have SAP ID as JSMITH01
The requirement here is when user fill the REQUEST FORM for NEW User ID there is field where in the requestor need to put the desired SAP ID,
Can a validation be set OR Logic be written so that user can put the SAP ID as per the naming convention..?
Also , any other solution as to how the situtation can be handled in CUP...
Regards.
AjitHi Ajit,
Yes, you can maintain the user ID in the Active Directory. User id will be now auto populated in the request form, from Active Directory when we data Source is LDAP -Actice directory. So when user login to end user form to create a request, It's all information( user details + manager details ) will fetched from Active Directory.
It is not possible to change userid in later stage of approval in the request.
You can have security as final stage and guide them to create user manually as per naming convention.
Make auto provisioning OFF in CUP
Kind Regards,
Srinivasan -
Creation of new domains in weblogic
Hi All,
I need to create two new domain in weblogic.
It should be start & stop from the admin console.
How to do that. What is node manager?
Just assigning the managed server with machine will do the start and stop from admin console. ?creation of new domain in weblogic
-
EA-FIN New Depreciation - How to restrict creation of 'new intervals' ?
Hi Everyone,
We have turned on the EA-FIN Business Function Extension and are wondering if there is a way to restrict the creation of new intervals using company codes. We have three companies in our SAP system and want only one of them to be able to create new intervals. Is there a standard way to do this or only be development? All ideas are welcome!
So far we tried to search if there is an Authority Object, which could be used to apply this restriction with no luck. Could it be done using Validations?
Thanks in advance,
Ernewhy would you want this? intervals are just a technical item... so long as the numbers are correct and the calculation is logical to follow, why would you care?
you can probably achieve this by:
1 - immediately blocking every asset record so that no other postings can be made
2 - not allowing any time-dependent changes to occur. this might be possible via authorization or you could remove the time intervals button via a simple screen modification
but I don't understand why this is wanted. -
Strategy 82----How to stop creation of New Production Order
Hi All,
My client is facing problem with the material which having Strategy 82- Assembly to Order, As when they make a sales order , w,.r.t that a Production order is made automatically by system,. User complete the production process and deliver this material , now when ever the Sales user change "Credit Block: in that particular sales order again a New production order created to this sales order, How to control his creation of new Production order? As if new production Order create it brakes the link between Sales order and the previous Production order which is already in delivered status.
Your Prompt response will be appreciated.HI ,
I am closing this thread , as I know how to got a control on trhis, As of behaviour, startegy 82 says every time u change in sales order it will create a new Production order during saving, if the previous order is not been in ONLY REL status. So the only option to control this is in S.O ,change the Item category to "CN" i.e NO MRP when if required there has been any modification to S .O. In std SAP system item catageory has to be congiured , in SPRO SALES we can do the necessary settings. -
How to approve creation of new identities
Hi,
I have created an approval process for the creation of new identities based on the how-to-guide for role approvals.
My idea is to determine all approvers in a script which gets the entry reference as parameter from ToIdentityStore pass.
However, for some reason, the entry reference is empty.
Any ideas what am I doing wrong?
Here is the script:
function nsn_getNSNApproversFromCompanyAddress(Par){
var entryReference = Par;
uErrMsg(1, "entry reference: " + entryReference);
var idStore = uGetIDStore();
var companyAddress = uIS_GetValue(entryReference, idStore, "MXREF_MX_COMPANY_ADDRESS");
uErrMsg(1, "company address: " + companyAddress);
var nsnApprovers = uIS_nGetValues(companyAddress, "MX_APPROVERS");
if (nsnApprovers.indexOf("!ERROR")>= 0)
uErrMsg(1, "ERROR: " + nsnApprovers);
return nsnApprovers;
uErrMsg(1, "entry reference: " + entryReference) does not print out any value for entry reference
And here is the destination tab content of the ToIdentityStorePass:
MSKEYVALUE %MSKEYVALUE%
MX_APPROVERS $FUNCTION.nsn_getNSNApproversFromCompanyAddress(%MX_ENTRY_REFERENCE%)$$
Thanks in advance for your help,
ElmarHm, from what the error output message tells me it looks like MX_ENTRY_REFERENCE does not contain ANY value.
uErrMsg(1, "entry reference: " + entryReference); generates this output: 'entry reference: '
May this be due to the fact that this is a creation process and the identity to be created is not yet stored anywhere? If so, what would be the correct way to implement an approval process for identity creation?
In the destination tab, MX_PENDING_VALUE is defined, as in the how-to-guide manager approval example.
Thanks & Br,
Elmar -
Creation of new internal delivery channel using AQ
Hi,
I wanted to route one of Trading partner data to a different queue.(no want to use existing queues - IP_IN /IP_OUT queue).
This needs to create a new delivery channel using AQ in B2B.
I have gone thru the steps & entered all entries, but I am not able to find any queues created in B2B schema.
Do I need to create a queue using PL/SL in B2B to make it available as internal delivery channel or this setup itself will create a queue in B2B?
PFA the entirs:
for transport parameters
- transport server (B2B server IP)
- Protocol as AQ
-URI - b2b.<uri_name> (name of Queue, wanted to create)
- Hostname
- Port
-SID - b2b
-consumer - b2buser
- receiptient - null
-Polling interval - 6000
Transport server details:
Host name - (IP)
IP - Host IP
username -
Pswd - for B2B schema
Any pointers will be a great help.
Regards,
MSAs mentioned by TH in the above post, first thing is to create the data type that is used for messages - IP_MESSAGE_TYPE. This data type will already be present in the B2B database and could be reused.
For a new data type you could do the following.
==============================================================
Create a new data type using the following
==============================================================
create type IP_MSG_TYPE as OBJECT (
MSG_ID VARCHAR2(128),
INREPLYTO_MSG_ID VARCHAR2(128),
FROM_PARTY VARCHAR2(512),
TO_PARTY VARCHAR2(512),
ACTION_NAME VARCHAR2(512),
DOCTYPE_NAME VARCHAR2(512),
DOCTYPE_REVISION VARCHAR2(512),
MSG_TYPE INT,
PAYLOAD CLOB,
ATTACHMENT BLOB
Once you have created a new Data type ( or are reusing the existing data type), you need to create Queue Table that will hold the Outbound and Inbound message queues. The existing Queue table is "IP_QTAB" which can again be reused.
For new Queue table you could do the following
==============================================================
Create a new Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue_table ( queue_table => 'MY_QTAB',
queue_payload_type => 'IP_MSG_TYPE',
multiple_consumers => FALSE);
If you need to reuse the datatype change the queue_payload_type to 'IP_MESSAGE_TYPE'.
Once we have the Queue Table that will hold the queues, we need to add and start the queues that are to be used for the inbound and outbound messages.
==============================================================
Create the new Queues into the Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_OUT_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_IN_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_OUT_QUEUE', dequeue => TRUE, enqueue => TRUE);
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_IN_QUEUE', dequeue => TRUE, enqueue => TRUE);
If you are reusing the queue table IP_QTAB for creation of new queues, then reference that for the queue_table in above commands.
You need to reference the queue_name eg. B2B.My_OUT_QUEUE in the B2B UI screen.
Hope this helps.
AKT -
Creation of new condition type: MWST
Hi, Everyone.
I would like to ask for some help regarding this issue: Creation of new condition type: MWST with the following details:
1. For the country French Polynesia, Create a new VAT condition of 10%.
2. Create a new one called : Class : Z u2013 Designation : France : TOM corresponding to 10 % of VAT to be invoiced
and then associate this new VAT code u201CZu201D to the applicant Nr 221860
If you could provide me a step by step process on how to resolve this, it would be very much appreciated. Thank you so much.Hello
What type of condition type you want.
It is always advisable to create a new conditon type copying a standard condition type.
For gross price condition types select PB00/PBXX
For freight charges, Copy FRA1/FRB1
Regards -
PMS: Creation of new tabs for reference elements of ENHANCE BADis
Dear Experts,
I am on a PMS EHP5 implementation (for all practical purposes, it's an EHP4 implementation as we are not using the pre-defined template) and have the below problem.
I have the ENHANCE_FIX and ENHANCE_FREE BADIs included at the VA level (as the requirement is to create immediate child objects for the template through these BADIs). I have a reference element (VB) defined for these BADIs.
Example template (L1 = Level 1, L2 = Level 2, L3 = Level 3):
L1 - VA
---- L2 - VB1
--------- L3 VC1
--------- L3 VC2
---- L2 - VB2
---- L2 - VB3
In the above example template, the ENHANCE* BADIs will add VBs (example: VB4 and VB5) at the L2 level (appearing in the document below VB2 and VB3).
The requirement is to have separate tabs for each VB at the L2 level (so I will have one tab for VA and 5 tabs for VB from the above example).
I am unable to specify creation of new tabs for the reference element VB when I carry out my tabs and process configuration.
I have not been able to find any information on this aspect either. Would appreciate any help that can come my way.
Thanks.Thanks Maurice.
I still feel that the product should leave that option to the designer of the solution. There are a lot of solutions which can get chaotic. If designed appropriately, I guess this chaos can be controlled.
At the very least, I am sure that I have not left anything out in configuration. I will raise this with SAP over a CSS.
Thank you for your input. -
Hi Guy's,
creation of new infotype we are using Transation code:PM01, when we enter this TS it displays differnt tabs like : Create infotype,infotype version, Screen structure.. presnt require ment is to enhance the one tab to that TS.(Ex: create the one custom infotype like Employee Details, when ever we press the Eployeedetails tab it displays the related field list). Pease help me how to proceed this senario.
Thanks and Regrads,
Sai.
Edited by: sai shanhu on Apr 7, 2008 8:44 AMSai shanhu,
Creating Infotypes for PA and PD using PM01.
1. Infotypes should be started between 9000 9999
2. Go to transaction code PM01.->select Create infotype
3. Give the Infotype number on the screen 9010
4. Click on the Button Generate Objects right to the Infotype input field.
5. It asks for the Creation of the PS9010 structure for infotype. Create, save and activate and come back remaining things will be created automatically. Remaining things means Module pool program, User interface, BADI.
6. Maintain infotype characteristics ex: Time constraints, Subtype, assigning single screen & list screen and save.
7. Select Screen radio button and give 2000 on input field and press edit button .It takes you to the SE51 screen painter. Here we have to write logic for the validations for the fields on the Infotype screen.
Creating subtypes for the infotype
1. Create subtype field in the PS structure of the infotype table.
2. Go to PM01 and press on technical attributes button and select infotype for which subtype should be maintained and display in change mode and enter Subtype field, T591A (Subtype table), T591T (Subtype text table), T591A (Time constraint table) tables and save and exit.
3. Go to SM30 and enter V_T591A and press maintain. Enter subtype numbers and its text and save.
I hope that it helps u .
Regards,
Venkat.O -
Auto Creation of new requisitions based on a list of items
Auto Creation of new requisitions based on a list of items
We are starting discussions to determine how we could auto-create requisitions based on a list of servers in order to perform periodic health checks.
One approach we thought about was creating one service request that could spawn multiple requests, again based on a list and using a set schedule (weekly, monthly, quarterly, yearly, etc.)
Has anyone implemented this and can provide some guidance/tips?You can check this article for more references on how to use sp_helptext object_name stored procedure:
http://blog.sqlauthority.com/2007/05/25/sql-server-stored-procedure-to-display-code-text-of-stored-procedure-trigger-view-or-object/
I also suggest trying commercial tools to sync and compare the stored procedures between two databases. We used
ApexSQL Diff, but I've also heard some good things about
Devart's tools. -
Automate Creation of new items in EBS
Hey everyone -
Just a question ,
we want to automate creation of new items in our system.
Our view is something like -
1. user GUI to request a new item, according to predefined templates.
2. Users fill a few fields of information.
3. Item manager gets notified and approves item is needed.
4. Automation to run batch and create everything relevant. (org assignment, item KFF, category assignments, BOMs etc). As much automation as possible, we can map template behaviour, variety is small.
I was wondering if there is any product supporting such behaviour.
I looked into Oracle's APC, and it seems like it doesnt do enough. Besides as far as I noticed it relies mostly on Item Catalog attributes which we don't. Also Im not sure if this product is "alive" coz oracle bought AGILE for PLM.
Does anyone know of a product that supports creation of new items and is flexible to fit our needs?
We want to make sure we're not missing something before we develop custom code for that.
Thanks,
AaronHi,
This is prom PIM to Oracle
I have done an interface which creates an item in master and child .Which assighns category set on iots level controls .It inserts item into all active subinventories.
It notifies the end user with email any item already exits and error .
Regarding templates.
it assigs compatible templates at master and org leve.These are predefined and are not validated in program
Edited by: Sankuratri on Apr 5, 2009 10:02 PM -
Hi,
While creating a new Sales Order(tcode VA01) depending on the material, Item category will be generated and depending on the Item category purchase requisition screen(ME51n) will be automatically opened and PR will be created.
Now to automate this process, BAPI_SALESORDER_CREATEFROMDAT1 will be called to create the sales order. But the requirement is that we need to pass Requisitioner and Vendor to the BAPI for creation of PR.
But in this BAPI there is no option/field to pass Requisitioner and Vendor. So is there any other BAPI/Function Module where a new Sales order is created and also we can pass Requisitioner and Vendor required for creation of new PR.REPORT ZSALESORDER.
Parameters
Sales document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d .
SELECTION-SCREEN END OF LINE.
Complete Deliver
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
v_text10 = 'Complete delivery'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = p_autlf.
header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF. -
Trx. MM41: Creation of new article data
Hi togehter,
I've a special question regarding tax data proposal in the area of SAP Retaill - Creation of new article data.
We've distribution centers in different countries.
If I create a new article masterdata for a sales organization assigned to Austria and a distribution center
assigned to Italy I get the following tax data proposal (if I enter '1' in field MARA-TAKLV):
IT Italy MWST Output tax 1 Full tax
IT Italy LCIT VAT license Italy 1 Full tax -> error: the category LCIT does not define classification 1 (only 0)
I assume that the entry LCIT comes from table TSKM.(material taxes).
Now my question.
We don't need the entry LCIT. It is possible or it is the right way to delete the entry named before?
Or should we create a new entry?
Thanks in advance for your help/info.
Best regards
FrankMoved from SAP ERP SD Sales to SAP for Retail. Please try to post in the right forum to get right direction to your requirement / issue. Also go through the following blog which will help you.
Find Topic Spaces on SCN (Forums)
G. Lakshmipathi
Maybe you are looking for
-
MacBook Air with Mavericks. I need to download agendas with embedded files. This is through an encrypted email account. My Mac is blocked from even opening the embedded files on line and I can't save any of this to my laptop. It works fine on my PC
-
Dear All, I've set the exchange rate type for foreign currency docs as "G" from OBF4. Lets say my local currency is USD. I created a PO with foreign currency EUR. From trx MIRO, when i call this PO, from details tab, i can see that the exchange rate
-
Hi i got a small problem in concatenating i'm providing you my coding part by which you can understand what i have done in this program actually i have to join three fields(WERKS,LIFNR,MATNR) in two different tables(EKKO,EKPO) and i have to compare
-
If I comment the first line and uncomment the second the script runs as expected, or when it's run for one individual contact. But when it's run against the entire OU it fails and returns the error at the bottom of the posting. Any ideas? $MC = get
-
[Solver]Nginx and fcgiwrap
I have been trying to get a single user server side cookie setup running on arch with nginx and fcgiwrap. But cant seem to sort out the following my stripped down nginx.conf is as follows- server { listen 127.0.0.1:8080; server_name login; location /