Creation of new Material Type - Asset

Dear Friends,
Here as per my client requirement, i have to define new material type for Asset Material.
For this definition i need following info -
1) Views to be selected.
2) Which Price control indicator is to be set for the ASEET
Material Type? (V or S)
Thanks in Advance

Hi
Material type for asset - Copy ROH.
Maintain the views Basic data, Purcahsing, Accounting, Storage views (only if you have profit center accounting )
Price Control give it as a Moving average.

Similar Messages

Reg: Creation of new Material type

Hai Guys,
Jino here,can anyone please tell me the procedure for creating my own "MATERIAL TYPE"
while creating a new material.
Regards
Jino.

Hi
decide which material type in the standard availabilty closely resembles you New material Type you are planning to create, It may be ROH/HALB/FERT/ERSA or any other. Use the TxN OMS2 for this, select the existing Std Material and do a Copy As and name the New material Type starting with Z . for example ZRAW , once saved select the material tyep and go to the details of the new material type , you can remove Certail views if you donot wish to have it during material creation, check out other parameters also lie external proc/internal proc, standard or Moving avg price indicator and proceed as required for you.
Regards

Cretaion of new material type in sequence and defining No. range

Dear Pal,
Please enlighten with steps for creation of new material type and subsequent configuration and defining No. ranges for the same.
thanks
v balajee

Hi,
To configure new material type please follow the below process:
In transation code OMS2 please select any standard material type and copy as for new material type.
You can give the name of material type here and then save it.
Now just double click on new material type and then select the necessary views as per your requirement.
Then select your new material type and click on quantity\value updation and select the check box for required plants.
For the Number ranges please follow the below path in SPRO:
Logistics-General>Material master>Basic settings>Material types>Define number ranges for each material type
Assign material type with Number range group
Regards,
Manish

Creation of new condition type: MWST

Hi, Everyone.
I would like to ask for some help regarding this issue: Creation of new condition type: MWST with the following details:
1. For the country French Polynesia, Create a new VAT condition of 10%.
2. Create a new one called : Class : Z u2013 Designation : France : TOM corresponding to 10 % of VAT to be invoiced
and then associate this new VAT code u201CZu201D to the applicant Nr 221860
If you could provide me a step by step process on how to resolve this, it would be very much appreciated. Thank you so much.

Hello
What type of condition type you want.
It is always advisable to create a new conditon type copying a standard condition type.
For gross price condition types select PB00/PBXX
For freight charges, Copy FRA1/FRB1
Regards

Creating New Material Type

Hi,
While creating new material types what things should be taken in to consideration?
If i want to create it by using copy function which ref. material type we should select and why?.e.g. ZSCRAP- Scrap Material

Dear Ashutosh ,
Grouping of Material that have same basic properties can be assigned to one material type.
While creating new material types following points to be considered as material type controls following things,
1) Material is intended for certain purpose ( For ex consumption)
2) Whether material Number to be assigned internally or externally
3) Number range intervals
4) Screen sequence & which screens to be appeared
5)Which user data can be entered
6) Which procurement type ( Internal or external)
7) Inventory management i.e. value & qty update required..
You can also change material type for a material under following conditions.
1) Old & new material type must be assigned to same account category,
OR
2) No. open PO ,stocks or reservations
I hope this will clarify your doubts,If found useful please reward points
Vivek Maitra

Field Ref. and SRef,mat type when creating new material types

Hi,
While creating new material type we are giving the Filed ref. on that basis sytem find which fields are option mand. etc. below the filed ref. there is also SRef for material type , why this fileld is use ? if this is screen sequence ref. then what is use of industry sector when creating material bcoz industry sector also determines the scrren ref. then which will follow when we creat the material.
regards,
zafar

Hi,
SRef is the Screen reference .
You have to create the Sref then it should assign depending on the transaction.
Grouping of transactions that determines what screens are displayed depending on the transaction when you maintain material master records. It also determines the order in which the screens appear.
The screen reference Transaction is in table T130M.
In material master the first reference is industry sector,then specific to the industry sector what is the material type & screen sequence.
Regards,
Raj

Reg. New material type and New movement type

dear Friends
For what reason we need to create new material type and movement type ? this quesition is frequently asked by interviewer,but my answer is not exactly correct. Please tell me, why we are create newly. already I posted this quesition and got reply but no satisfaction with that.
Thanks in advance
Rajakumar.K
*Note : Interview questions were not allowed in forum,Search forum before posting,lot of answered
threads already available*
Edited by: Jeyakanthan A on May 26, 2011 10:57 AM

Hi,
New Material type is required to meet various business functionalities of client. Depending on user department views required by client, field selection key required, wheather quanity and value updation is required or not and if so under which valuation area its required, wheather the business wants to have default value of price control in material master, number range intervals to be used and wheather its internal/external, account determination process etc are some controlling functions which may force a business to create customised or new material type.
Similarly new movement types can be created when the controlling features of the existing movement type do not match the requirement like wheather any movement type is required to move goods from GR valuated stock ( as an illustration), wheather auto PO/Auto storage location needs to be decided automatically, new account grouping and field selection procedure to be used etc are some controlling functions. As an illustration in earlier version of ECC 6.0 there was no movt type like 107,109 etc but since most of the business wanted to valuate stock when goods movement will occur from GR valuated stock , the above movt types was introduced in ECC 6.0. Thus business justification and understanding should be concrete to create new movt type.

New material type in SAP CRM

Hi SAP CRM Experts,
I would like to create a new material type in CRM .
Would it be necessary to create a new material type in CRM or can create in SAP ERP and replicate to CRM or in need to create in both systems? What are the steps to be followed ?
Please advice me.
Cheers
Sreedhar

You can create it just on ERP side and replicate it to CRM system. To do the replication, go to transaction R3AS an run object DNL_CUST_PROD1. This download has to be performed before the material download.
A delta download is not available so this replication must be repeated everytime data is changed in ERP. You can monitor the progress of download in R3AM1.
Regards.

CREATION OF NEW MOVEMENT TYPE

Hi,
I have a query regarding creation of a new Movement Type.
Is there any specific rule to start creating new Movement Type only with numbers starting with digit 9 or we can consider numbers starting with any digits.
Please clarify this as soon as possible.
Thanks in advance.
Thanks & Regards,
Srinivasa M.S
=91-9910077829

Hi,
You can create Movement Type with numbers starting with digit 9 or beginning with Z or X or Y alphabet folllowd by number ( for example: Z01,Z02,Z09 etc)which you can differentiate standard Movement Type with customised Movement Type .
For more check the link:
http://www.sap-img.com/materials/how-to-create-a-new-material-movement-type.htm
Regards,
Biju K

Creation of new material with reference to other material

Hi All,
I have requirement where i have to create new selling unit material with reference to the given material.
Now, can any buddy suggest which FM or BADI i have to use to read BOM and ROUTING info of reference material and same to create BOM and ROUTING for new material.
Doing this with BDC after reading data directally from tables is one option, But i am looking for any BADI or Fm which will serve the purpose.
Thanks in Advance,
Rahul

Hi,
... but if you prefer FM, then you can use BAPI_MATERIAL_MAINTAINDATA_RT or BAPI_MATERIAL_SAVEDATA, depending if you are using Retail or not. BDC is usually not possible for all views - which you would need for complete creation.
Regards,
Christian

Requirement of creation of new condition types and Account keys tax codes

Hi,
In what all possible scenarios will the requirement to create new Condition types and accont keys arise for the creation of new depreciation keys.
Thanks
Raja.
Edited by: Raja Gopal 345 on Aug 29, 2010 1:06 PM

Unless you use jurisdiction codes, and no external tax system, for
example with tax procedure TAXUSJ, there is no validity dates for the
condition records. You can see this differnce by comparing the tables
A003 without jurisdiction codes and A053 with jurisdiction codes. A053
contains the extra fields DATBI (key field) and DATAB. This is the
standard functionality.
Please have a look at the following part of note 418582:
" Changing past percentage rates has to be inhibited in order to avoid
database inconsistencies. For this reason, the functions which allow you
to transport time-dependent tax codes with percentage rates from the
past are not supported."

What we need creation of new movement type ? when will be used?

Dear guru,
pls clarity

Hi Sai,
Many a times you want to post value of some transactions to different G/L account for the same material depending on scenarios..like scrap generated at x process...scrap generated at y process etc..
So this will be done through creating new movement types
Regards,
Rohan

PURPOSE OF CREATION OF NEW MOVEMENT TYPE

Hello Experts,
Can you please tell me the purpose of creating a new movement type with the description.
Thanks and Regards
Nilu S.

Hi,
Movement type determines the treatment of any Stock in terms of Qty & Value. SAP has provided the standard MVt type for use in different business scenario.
How a Mvt Type Works is important to understand the requirement of new Mvt type -
a. in material master we are assigning the Val. Class, We are assigning the GL a/c with Valuation class in combination with General account modifier in OBYC like GBB >> VBR>> ValClass>> GL A/c.
b. Each valuation class is linked to multiple General account modifier Key and GL a/c (as per our business requirement).
c. Each movement type is assigned with Account modifier key in IMG Customising.
So when ever we enter a material & Mvt type in any transaction system determine the GL A/c to be for Automatic posting through Account modifer Key (From OMJJ & OBYC).
So you can see, there is limitation of GL assignment for automatic posting in OBYCfor each business scenario.
if requirement of diff. accounting arises for a material with same valuation class, we need to Create new Mvt type & Account modifier key. This new Account modifier key will be linked to New GL in combination with Val. Class.
Hope above explanation satisfy your query.
Regards,
Ranjan Kumar

Release Strategy for a new material type in PR

Dear Friends,
One of our client require new Release Strategy for a particulat material type PR. Can u pl provide me the steps to configure a new release strategy for PR for a particular Material type.
Regards,
Ask

Hi,
Create a Char for your material types in CT04(MARA-Table,Field-MTART) and assign the same to your Class in CT02.
Then follow all the cusmozation path for your PR release startegy .
For Config part refer the below wiki link it may help you.
http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE
http://wiki.sdn.sap.com/wiki/display/ERPLO/ReleaseprocedureforPurchaseRequisitioninMM?focusedCommentId=195723808#comment-195723808

Restrict Info Record Creation Based on Material Type

Dear colleagues
I would like restrict material info record (ME11) creation based on given materialsu2019 material type (MARA u2013 MTART). Is it possible such control? If yes, can you please provide the way?
Best regards

Dear AP,
Unfortunately I wasnu2019t able to find any user exit, badi or etc. That's way I need to post the question to the forum. Before providing any answer please consider that no question is post without any research and give the audience specific, to the point answers not such irrelevant ones.
Thank you

Creation of new Material Type - Asset

Similar Messages

Maybe you are looking for