Creation of new page format

Hi
I have created new page format and added it to format and then to device by using SPAD.
This new page size is 8 X 6 Portrait( Is there any standard sap page format available with this size)
the problem is that when print out is taken by using script the first page of the first document is correctly printed , But from second document onward the printer scrolls more than required, the print out is taken in continues page.
Where to set the scrolling space and all
Hoping help

I think it is Printer problem. Check your printer settings.

Similar Messages

New Page Format in Smartforms

Hi All,
I am working on smartforms.
I have created a new page format of width 25 cm and width 30cm according to client's requirement.
Smartform is for customer invoice which is a pre-printed and i have to get data into that.
In sform i have given the my own page format name.
Now problem is am getting print preview correctly but while giving print its givivng the error
' OUTPUT COULD NOT BE ISSUED' and print is not coming.
Please help me regarding this issue.
Thanks in advance.
Regards,
Murthy.

Hi,
I have checked it but its ok.
I have created page format through SPAD only.
Regards,
Murthy.

How to create new Page Format

Hello
i want to create new page format in sap script
can any body guide to crate this & how to assign this
thnks in advance

Hi Nitin,
You can create a new page format by transaction code SPAD. Here you will have to create a cutomised page format for ex: 'ZPAGE'.
After this you will have to create a format type 'ZPAGE'. Assign the page format 'ZPAGE' to format type 'ZPAGE'. Pls make sure that both the names are identical.
Once you do that you will have to assign the format type ZPAGE to the printer which you want to use.
Now you can use this page format in your script.
Hope this helps.
Sushil

Printing Problem in New Page Format

Hi Everybody,
              I have an issue lying long time in my Company.
        Abap person asked me to create a new page format with new page sizing and all. i created it. this is actually for Voucher printing which does not require A4 size. so that i specified specific paper size in that.
     Voucher is Printing in the Specified Size, ok. But, after printing it, the printer automatically Rolls till the end of the paper.(Probably this would have taken A4 by Default)
     the issue is, we need to stop this rolling and we need to make this printing as specified.since it is continuous printing, every time we cant manually rotate the page.(Printer Epson Dot Matrix)
Is this either can be sorted out by ABAP or Basis Person.
   What can be done from Our Basis Side?
Thanks,
Siva

Hi,
How you solved this problem?
I am also facing the same problem.
Thanks in advance
Sameer Dhuke
Edited by: sameer dhuke on Feb 16, 2010 11:27 AM

New Page Format implentation in Sap Scripts and Reports

Hi,
   I want to print Report details and also some of the SAP Script details on the paper size of 350MM width and 310MM Height in the PORTRAIT format.
   So i created new page format with these dimensions.
   How i can use this for reports. So i can set these parameters while taking output from Report.
   Pls specify if any configuration required for this.
Thanks in Advance,
Regards,
Pavan.

In SAPscript, you set the Page Format for the document in the "Page Format" field of the "Basic Settings" page of the documents "Header" information. The popup list of this field will show all available formats in your system, so this is a ggod way to make sure your new format is set up properly.
For reports, page format is set either with the LINE-SIZE addition to the REPORT and NEW-PAGE commands, or through the PARAMETERS addition to the NEW-PAGE command. When you use LINE-SIZE the print system picks the format for you, based on the available formats in the systems.
I don't remember if there is an activation step for Page Formats, or if saving is all you have to do.

Want to move documents from old pages to new pages format. How?

Want to move/change pre-Yosemite Pages documents to the new Pages format. How?

As I mentioned earlier, the Pages v5.5 document architecture is alien to Pages v5.2.2 on Mavericks. Yes, you can drag/drop the v5.5 document onto an open Pages for iCloud beta session. No, you cannot download this v5.5 document to Mavericks, and successfully open it in Pages v5.2.2. You get this familiar greeting.
Plan B is to open the document in Pages for iCloud beta. On the toolbar, click the Wrench icon, and choose Download a copy, and then pick Word. By the time you go through all this nonsense, you could have selected Share > Send a Copy > Mail > Word and opened via email on Mavericks.
Of course, if one had started their word processing in Office for Mac 2011 Word, this obtuse means of backward document sharing would have been an non-event.

Create a new page format

... Hi everybody !!!
I need to create a new page forma for a checkt: Width 165   / MM,   Height     / Unit       67    / MM
i created it in spad transaction,
Full Administration -> Extended admin -> Device Types
But when i execute the program in order to print the format the system send a message
Device type HPLJ5 does not support page Z165X67, where z165x67 is a format that i created.
I think the problem is in the the definition format Z165X67 associated to devide type, in the actions
( printer initialization, reset after exit, cover page, end of page, etc ), here uses a hexadecimal code and i don'r undestand
this, someone can give me any suggestion.
    Thanks
    Best Regards

.. Hi !!!
I can asociate the new format page, i can print a check, but i have a little problem, when I send to print more than 1 check,
the jump of page is not equal, so the output for the other checks is nor rigth.
   Do you have any suggestion ??
Thanks
Noemí Huerta

Disabling creation of new pages on user's PC

Hello everyone,
By editing the various roles' settings, I've managed to
restrict my users to creating new pages from only the list of pages
I want them to, EXCEPT for the fact that they still have the option
in the 'New Page' dialog to create a new blank page on their own
PC.
Does anyone know if it is possible to remove this option from
the dialog? I've investigated some of the XML and JS files, but so
far haven't come up with anything.
Thanks!
Matt

I'd also like to find out if this is possible, as limited
roles to specific templates is great, but only if you're truely
limiting them, and by allowing new pages to be created as blank
pages on their PC, you're not.

Creation of New Page in SAP Script

Hi Experts,
Please advice when will a new page trigger in SAP Script :
As per my requirement I need to create a new page for an existing layout and make changes to the second page alone...
but this page should be triggered only for a specific condition. Is it possible to trigger second page when it satisfies certain conditon?
I have searched SDN regarding the same but most of them have recommended to use NEW-PAGE...but as per my understanding NEW-PAGE is used when certain data needs to be printed on the next page ( not on the new page ).
Thanks
Karthik.R

Ok friend,
Try using the conditions in your driver program using 'CONTROL_FORM' function module. or using some other condition in it.
You can also give conditions in text editors and you can trigger the pages.
i think these links will help you in solving your solution just check these Link: [new page based on condition in sap script|new page based on condition in sap script; this is just an hint from this you can develop the idea.
Link: [Breaks in Smartforms|LAST PAGE FOR SAP SCRIPT;.
Also there are other few related links in SDN which will help you.
I think this must solve your issue if you still face any queries please revert back to me i will help you.
Thanks,
Sri Hari

New page creation in sap scripts

Hai
some one can give me the path for creation of new page in sap script(forms).
pl giove me the complete path
thank u in advance

hi
Goto SAPSCRIPT transaction code se71.
open your sap script.
goto pages button
right click
create element
a new page element gets created
fill in required details of this new page like page name next page
next page is the page that comes after the current page
if you have no next page - give the current page name in next page.
you can further create windows in this page and continue
Regards,
Richa

Creating Page Format In Quality

I want to create a new page format, for the purpose I did the following...
spad-> Full Administration-> Device Types-> Page Format-> Change-> Create-> (Page Format=ZA4, Orientation=Landscape, Paper Size (Width=215 mm, Height=300 mm))
When I click on save, a pop window opens and shows the massage Object can only be created in SAP package
Pressing enter it asks Package under attributes
What to select in Package is my problem? Please help....
Lalit Kumar

On the save Option Select Local object or Enter $TMP in the package field.
it is not working:
*Create a package in SE80.
And enter the package name.*
Can you please provide me the steps to create package??
Lalit Kumar

CREATE EDITION CLASS FOR PAGE FORMAT

Hi,
I have a sales form in SapScript, for which I created a page format "ZFCONT" in continuous form (305 mm. x 225mm.).
Now the system needs to create a "editing class" to associate the new page format (ZFCONT).
What are the steps to create the "editing class".
There is another necessary step to enable it to print?
Thank you very much for your help.
Fabio Rodriguez
by Argentina

Well, this should be a system problem (refresh) because the day after, without any change in SPAD nor anyplace else, the smartforms is recognizing the page type I've created.
Thanks anyway.
Regards,
Valter Oliveira.

Page format for SAP-Script not working in 4.6C

Hi all,
I have a problem regarding check printing.
I am using SAP version 4.6C
The size of paper for check printing is
width = 231 mm
Height = 304 mm
So for this I have created a new page format with these details in SPAD.
Then I assigned this Page format to spool format and assigned that spool format to SAPWIN driver. I have assigned this page format to the SCRIPT that is used for check printing .
But when I am taking the print out for the check with new page format, the printer dont print till the end of page, it prints till the total amount on check and then stops there. So this creates an alignment problem when taking printout for multiple checks.
Please give some solution for this.
Regards,
Bharat.

I guess you are printing on dot matrix printer. If yes, try to do some physical printer settings for the dot matrix printer by following the printer manual. I guess you have to change the page size.. or set default printer settings... it may help you to solve your problem...
if not goto your device types tab in SPAD and select device types.. select your device from the list (for ex, SAPWIN) click format and goto the format that you have inserted for this device types.. double click on your format, you will see printer Indialization.. try to write code like this
set page length to 8.5 inch (=52 lines at 6 LPI)
\e\0x43\0x44
Note the above hexa decimal value can be obtained by going through the printer manual.
Close the thread once your question is answered.
Regards,
SaiRam

Page format for 132 column dimension in smartforms

hi guys
*In smartforms what is the pageformat for 132 column paper i.e 360 * 310 mm is there any standard pageformat provided by sap or have to create a new one ,,,how to create a new pageformat.*
Edited by: ahamed13 on Jun 6, 2010 8:44 PM

Ahmed,
create the new page format in SPAD tcode. Go to the device where u want to create the page format as per the requriement.
Regards..

Second o/p been printed from first page due to page format

Dear All,
I have created a new page format with width 210 mm and height 290 mm and included it a smartform for invoice printing that I have created.The problem is that when i take a printout of the invoice program it prints the first page perfectly,but when I take printout of the next invoice,it starts printing from the same page itself ,hence the second invoice is printed on the first and the second page .Other page formats are been printed correctly.The problem is only with the this page format that i have created.Even if i Change the width and height of the page format from SPAD ,the output remains the same.Please help.
Thanks in advance,
Subhabrata Choudhury.

Hi,
I am not sure which device type you are using, but it is possible you need to add some commands in the sections below from SPAD:
SPAD -> Full Admin -> Device Types -> <Device Type> -> Formats -> <Format> -> End of page
E.g. In a windows device type like SAPWIN, the command below is needed:
formfeed
\f
This ensures that there is a formfeed after each page. You can check the standard page formats such as DINA4 to see which commands are required for your device type. Also for some device types, commands are needed in the printer intialization section for your custom page format to tell the printer the length of the page.
SPAD -> Full Admin -> Device Types -> <Device Type> -> Formats -> <Format> -> Printer Initialization
Again you can check the standard page formats like DINA4 or LETTER as a reference.
Regards,
Aidan

Creation of new page format

Similar Messages

Maybe you are looking for