Creation of new Portal Apps!!portal.wf not found !!!

Hi ,
In EBCC I am creating a new portal web application in the existing Portal
Application. I am assigning default portal webflow to my new Portal.
After synchronization , if I access the portal by its context root it
says, portal.wf not found..
What is the significance of portal-project directory ?
regards
vedant.

We found the problem,
We had to add a numeric and /or a special charachter in the password

Similar Messages

TS2313 Recently downloaded the new podcast app, but does not play offline. Can anyone help.

Recently downloaded the new podcast app, but does not play offline. Can anyone help? Thank you.

Hey Karenfromanamosa,
I fixed this problem by turning off the ipad and then turning it back on after 5-10 minutes.
Hopefully then when you play a video it will start playing.

New Portal Theme not showing up in list

Hello fellow experts,
I'm using EP 7 sp10...I've created a new portal theme, it shows up on the Portal Display page, under my Themes, however it does not show up in the drop down list (Content admin/Portal Content/portal users/standard portal users/every user core role) as an option for a portal theme...
Please advise!
Sincerely,

Hi Scott,
Please very these steps,
Themes:
System Administration
              -->
         Portal Display
                        -->
                    Theme Editor
                              -->
                          Choose a Theme
                                      -->
                                      Make Changes
                                        If Any
                                                 --> Save It
                                                            -->
                                                            Desktop and
                                                             Display Rules
                                                                      -->
                                                                      Portal Content
--->
                                                                      Portal Users
                                                                      <--
                                                             Standard Portal
                                                                   Users
                                                             <--
                                                        Copy [Default Frame
                                                         Work Page & Desktop]
                                                    <--
                                          Paste it In a New Folder
                                        Rename the Desktop
                                       <--
                                         1).Open The Renamed Desktop
                                         2). Open Folder Themes (sys) and R.C
                                         3).Add theme to DESKTOP.
                                         4) Save it.
                                         <--
                                 Open ->portal Admin -> SuperADmin
                              <--
                      Open -> Master Role Collection
                      <--
                Select a Role/user/group from Master Role Collection
             <--
          R.c on Renamed Desktop and add Portal Desktop To Expression".
        <--
   Open Renamed Dektop,Select the theme,
    <--
Hit the Button "Set Default" (save)
   <--
Logoff and Logon the Portal Page.
Regards,
Ramganesan K.

In the new Photo app 'Projects' will not stay open

Hi
In the new Photo app. released last week, I can not get the 'projects' to remain open. It just crashes and closes and actually now , since this afternoon I can not open any of it without it crashing.
i have a mid 2011 iMac running Yosemite 10.10.3.
i have a few photo books, slideshows and cards in the projects if this helps.
If anyone can help I would really appreciate it, even if its just so I can access the photos.
Many thanks.

Many people are reporting the project->crash problem. To the best of my knowledge, there is no fix for it.
For some folks, a temporary workaround is to select View->Sidebar and access the projects *individually*.
Hopefully this will work for you, fairymoo!
Apple's Meta-Problem: Inexplicably, "Photos" is *NOT* listed as an Application Community on the top-level web-site "https://discussions.apple.com/welcome" ... thus plenty of folks (including the poster and me too) have been unable even to find the right community for seeking/posting solutions.
Conclusion: not a smooth roll-out, Apple! Not least, why is the Photos Community so difficult to locate?

Trip list fails in portal - "user not found" - powl_act_query is corrupt

Hi group,
For one user, the trip list in portal dumps. It dumps only for the tab/query with all trips.
The message is "User not found" in the dump. When we debug, we find that the table powl_act_query is corrupt.
For the query id in question, the key fields application and user are empty.
We corrected the error via POWL_D01. But can anyone explain how this could happen?
Best regards
Kirsten

Hi Kirsten
I did some checking on this error and found that it has happened on occasion that sometimes when users have their personalized queries saved in table POWL_ACT_QUERY, the names for these queries in table POWL_QUERY_T may be overwritten and subsequently the GUID is displayed on the tabstrips instead of the names.
The solution as you found to delete the personalized queries with POWL_D01 is unfortunately the only one I couild find to fix these queries and again show the delivered standard queries.
Unfortunately this is more of a MC-MUS-POW issue relating to personalisation rather than travel management but you could check in SCU3 if perhaps there were any authorization errors maybe?
This wiki link may also help
http://wiki.sdn.sap.com/wiki/display/WDABAP/POWL
Cheers
Sally
Edited by: Sally Redmond on Nov 5, 2011 10:02 AM

Creating Publishing Portal, File Not Found error

When I am creating a publishing portal, site is created successfully however when I navigate to the site, I get "File Not Found" error. Below is relevant ULS log information. Can you provide any insights?
Unknown SPRequest error occurred. More information: 0x80070002
SPRequest.GetWebUrl: UserPrincipalName=, AppPrincipalName= ,gSiteId=76ed9a5e-314f-45ed-bd89-efdb2c4281d1 ,gWebId=b58fdec1-b77d-4651-a8e0-cf52d799bd7e ,bstrSiteUrl=http://abc.com/sites/projects
System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002), StackTrace:
at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint)
at Microsoft.SharePoint.Publishing.CachedObjectFactory.OpenWebFromSuperUserSite(Guid webId)
at Microsoft.SharePoint.Publishing.CacheManager..ctor(SPSite site)
at Microsoft.SharePoint.Publishing.CacheManager.GetManager(SPSite site, Boolean useContextSite, Boolean allowContextSiteOptimization, Boolean refreshIfNoContext)
at Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ComputeRedirectionVirtualPath(TemplateRedirectionPage basePage)
at Microsoft.SharePoint.Publishing.Internal.CmsVirtualPathProvider.CombineVirtualPaths(String basePath, String relativePath)
at SystemWeb.Hosting.VirtualPathProvider.CombineVirtualPaths(VirtualPath basePath, VirtualPath relativePath)
at System.Web.Hosting.VirtualPathProvider.CombineVirtualPathsInternal(VirtualPath basePath, VirtualPath relativePath)
at System.Web.UI.DependencyParser.AddDependency(VirtualPath virtualPath)
at System.Web.UI.DependencyParser.ProcessDirective(String directiveName, IDictionary directive)
at System.Web.UI.PageDependencyParser.ProcessDirective(String directiveName, IDictionary directive)
at System.Web.UI.DependencyParser.ParseString(String text)
at System.Web.UI.DependencyParser.ParseFile(String physicalPath, VirtualPath virtualPath)
at System.Web.UI.DependencyParser.GetVirtualPathDependencies() at Microsoft.SharePoint.ApplicationRuntime.SPVirtualFile.CalculateFileDependencies(HttpContext context, SPRequestModuleData basicRequestData, ICollection& directDependencies, ICollection& childDependencies)
Are there any dependencies for a web application before I can create a site collection based on publishing portal. I am able to create a site collection based on publishing portal just fine in a different web application.

Hey Diffdent,
We are facing the same issue in our stagging environment. Please update the thread if you have found the solution.
Thanks in advance.
-Amar Trivedi

Does the new Map app under iOS6 not offer driving directions in the United Arab Emirates?

When I want the app to give me driving directions between two locations in Dubai, the app displays "Directions Not Avaiulable".
I sued the Google Maps app a lot under iOS5 for driving directions. Now I am literally often lost ....

Hi,
You are here on a user-to-user message board and not in contact with apple representatives. If you have complains to do I suggest you do so through the feedback tool on apple.com
Regards

Error when starting DPS App Builder - Application not found

WTF folks.
This morning I open my document (CS5) and it says I have to update my folio tools (needless to say i hate it to be forced to do an update before I can start working).
Well, I do an update, both tools (Folio Builder and Producer Tools).
Now there seem to be some changes, I cant refresh my folio via menu anymore. When choosing the new "build app"-option I get an error :
"An error occured while starting DPS App Builder. The DPS App-Builder Application was not found" (translated).
German original version: "Beim Starten von DPS App Builder ist ein Fehler aufgetreten. Die DPS App Builder-Anwendung wurde nicht gefunden."
Any Solutions? Where to get the mysterious "App-Builder Application?"
edit: refresh is now only possible inside the folio it seems.

App Builder is nothing but a new name to Viewer Builder. Download it from DPS Dashbaord.

Office web app 2013 file not found

Hi,
Trying to access a document preview from sharepoint 2013 i get "file not found" from the office web app server.
In the OWA server uls logs I can see a messege "disk cache file not found" so i looked at the cachelocation and the renderinglocalcachlocation
directories and i can only find the doc preview files in the renderinglocalcachlocation dir.
I also made sure the identity of openfromurlhost and openfromurlweb application pools have access to this documend and i
run the openfromurlenable command.
any ideas ?
thanks.

Hi,
Try the following:
1- https://support.office.com/en-nz/article/Configure-disk-based-cache-settings-75429eaf-893a-4a27-bca7-bf75497091de
2-adding OWA
url to the "Trusted Sites".
3-Make sure you have followed the instructions for OWA installation configurations
http://blogs.msdn.com/b/uksharepoint/archive/2013/08/06/scripted-installation-of-sharepoint-2013-and-office-web-apps-server-from-the-field-part-4.aspx
Kind Regards,
John Naguib
Technical Consultant/Architect
MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
Please remember to mark your question as answered if this solves your problem

Moved Music to New Hard Drive - Required folder not found??? pls help

Hello
I have recently purchased a new external hard drive as my crappy Dell was full to the brim with music.
I have moved all my music files over to the hard drive and re installed itunes.
Now when i drag my music folder into the itunes library it updates but the shortly after an error message occurs that says:-
'Itunes Libray music file cannot be saved. Required folder not found'
Previously i have saved my itunes folder within my music folder?.
Now everytime i close down itunes all my music has gone from it!??
Any suggestions....sorry if being really ignorant..not too profficient on computers..
Thanks in advance.
Sam
Dell PC Windows XP
Dell PC Windows XP

I think itunes by default looks inside you my music folder. In the itunes preferences screen there is an option to select a new folder to your library. Change the path to the music folder on your external drive. Make sure to always have the drive turned on before launching itunes though.
You may also be able to replace the my music folder with a shortcut to the music folder on the external drive. This behavior may not work in windows though so I'm not sure.

Error on new macbook pro: requested resource not found

hey everyone,
i just purchased a new macbook pro yesterday. im trying to download movies for a flight, but i can't even sign in (or authorize) my new comp with the apple store. when i try to do either i get an error message, +"we could not complete your request the request resource was not found"+
the weird thing is my itunes works fine on my imac. i was able to buy a tv episode earlier today no problem. both itunes versions (on both comps) is up to date.
ive read old threads where some suggested that itunes was down and/or to exit itunes and log back in. i don't think itunes is down b/c it works fine on my imac (just tried a few minutes ago). i tried exiting itunes on both comps and still no luck.
any suggestions?

ok i just tried it again, for like the 50th time, and it magically worked.

New software instruments installed but not found to use

Help please
I have downloaded 3 new AMG expansion, synth and power packs in garageband 08' running on a g5 with leopard os and though they appear on the HD where they should (HD/library/garageband/instrument library/sampler/sampler instrument) they are not found once inside garageband-new software track instruments.
Why is this happening and how can newly installed software instruments appear for use inside a track?
Thanks!

Not being sure exactly what you have tried, or what failure message(s) you have received, here's a general iPad troubleshooter.
iPad Support

"Download Files"procedure not working in duplicate app/shows page not found

Hello,
I have created an application using the "Download files" procedure described in "How to Upload and Download Files in an Application" chapter of the APEX "Advanced Tutorials." It works just fine on the one server, however, when I exported the application and data from the working copy and imported it in APEX running from my laptop, I could upload files and generate a report with a link to click and download the files again but when I clicked on those links, I would get a "Page Not Found" error. It looks like it might not be going to the procedure and instead goes to a page like the following: "http://127.0.0.1:8080/apex/DBAPORTAL.download_image?p_id=1868612316946460." On the working copy on the other server, when the download link is clicked, you will get a dialog box asking if you would like to open or save the file.
Could anybody tell me why the procedure is not being called and goes to a non existent url while the origonal application works just fine on the other server?
I have granted APEX_PUBLIC_USER execute permissions to the procedure. I am wondering if there are any other permissions that I should be granting. Should I grant PUBLIC or ANONOMUSE permissions to use the "download_image" procedure?
I have forgotten to mention that on my laptop I am using database 11.1 and on the server I believe the database is 10g.
Hope to get an answer to this issue. I've asked a couple people already and they are stumped.
Thank you in advance.
Linda

Scott,
I have tried to follow the instructions commented out "RETURN FALSE;" and added procedure 'DOWNLOAD_IMAGE' to wwv_flow_epg_include_local.sql. But I'm confused. Should I be changing file "wwv_flow_epg_include_local.sql' or 'wwv_flow_epg_include_mod_local" package?
When I run "ALTER SESSION SET DBAPORTAL FLOWS_030100;" in sqlplus, how do I know what FLOWS_XXX I have? Is it FLOWS_030100 or FLOWS_030000? I have database 11.1 installed. What version of APEX do I have with this database? How do I find out?
Do I need to be in a perticular directory before I run the alter script? If so what folder?
How do I "Compile the function wwv_flow_epg_include_local.sql.?"
Needless to say, when I added the procedure to the file, and when I tried to alter it, I got the following error:
SQL> ALTER SESSION SET DBAPORTAL FLOWS_030100;
ALTER SESSION SET DBAPORTAL FLOWS_030100
ERROR at line 1:
ORA-02248: invalid option for ALTER SESSION
Please tell me what I am doing wrong.
Thanks
Linda

New portal component not available for new iView

I've just written my first portal component using the NetWeaver Developer Studio. It's a trivial "Hello World" application.
If I run it in the portal from the NWDS it runs successfully allowing me to capture the full URL.
I tried to export the par file and upload it to my portal. I used the Archive Uploader from the portal to load the par file (System Configuration -> Support -> Portal Runtime -> Administration Console). The upload appeared to go successfully but the "Archive Deployment Checker" shows the local and repository versions as "undefined" with "update", "delete" and "refresh" buttons - no "install" button.
When I try to build an iView to display this component I don't see it in the list of possible types.
(portal content -> new iViews -> choose source type of "portal component") I can't see anything that looks remotely like my component.
If I create a generic applicationintegrator iView I can paste the full URL from my NWDS test run and it works. I can even build that into a role and make it appear in the portal content area.
How do I:
1 find/make visible my component so I can build an iView directly from it
2 if I can't do 1, configure the URL a little more generically so it's portable.
The URL in the iView looks like
http://dev.mycompany.com:5xx00/irj/servlet/prt/portal/prtroot/MyHomePage.HomePage
and I'd like it to look like
http://<prtroot>/MyHomePage.HomePage

Hi Murray,
Try to deploy your portal application from NWDS itself.
NWDS
Windows / Preferences / SAP Enterprise Portal /Add
After that check in Portal Archive Selection your component will be there.
And for shorter URL you needs to check the DNS settings.
Regards,

Creation of new portal user failed

Hello,
i'm trying to create a new user using the security.api, and the user is created with all data i've added, but we get an error : "User account is not accessible due to data inconsistencies". the field logon id is not filled.
the code i'm using is as follows.
public void wdDoInit()
//@@begin wdDoInit()
try{
String uid = "testuser01";
Date startdate = java.sql.Date.valueOf( "2007-01-01" );
IUserFactory userfact = UMFactory.getUserFactory();
IUserMaint newUser = UMFactory.getUserFactory().newUser(uid);
newUser.setFirstName("Test");
newUser.setLastName("User");
newUser.save();
newUser.commit();
IUserAccount uacc = UMFactory.getUserAccountFactory().newUserAccount(uid,newUser.getUniqueID());
uacc.setPassword("secret");
uacc.setValidFromDate(startdate);
uacc.save();
uacc.commit();
}catch(UMException e){
System.out.println("Error Occured" + e);
//@@end
is there anybody who is facing this problem, or anybody who solved this issue, or can helping us saving this issue.
thanks in advance

We found the problem,
We had to add a numeric and /or a special charachter in the password

Creation of new Portal Apps!!portal.wf not found !!!

Similar Messages

Maybe you are looking for