Creation of New storage bins for storage type 007 in Production

Hi Gurus,
Coudl you please give me a clairty, storage bins can transport from Qaulity or we have to create seperately from server to server like Qulity and production.
thx
r

Hello,
As correctly mentioned storage bins never transported from one environment to other. You have to create through LS10 or LS01N.
The bin structure can get transposted from one environment to other & then you can open the structure & create bins in numbers.The bin structure can be seen through LS10 & created through same transaction.
Regards,
Prashant

Similar Messages

  • Creation of new object link for DMS

    i have searched a lot  about Creation of new object link for DMS on internet .
    and all replies  focus on that documentation :
    1.     Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN
    The process logic must be according to that of screen 0204 in program SAPLCV00 and must not be changed.
    2.     Create the function module OBJECT_CHECK_XXXX (XXXX = name of the SAP object).
    i need  to know how to implement that  in more detailed step by step
    as  i know DMS and  abap also.

    Hi Reda,
    Hope the below URL will help to understand how the Process of adding a object link works.
    Enhancement Without Modification of the Object Links - Engineering Change Management (LO-ECH) - SAP Library
    Thanks & Regards,
    Seshadri.

  • Creation of new storage pool on iomega ix12-300r failed

    I have a LenovoEMC ix12-300r (iomega version).
    IX12-300r serial number: 2JAA21000A
    There is at present one storagepool (SP0) consisting of 8 drives (RAID5).
    HDD 1-8 (existing SP0): ST31000520AS CC38
    I have aquired 4 new Seagate ST3000DM001 drives as per recommendation on this forum:
    https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/33028/kw/ix12%20recommended%20hdd 
    I want to make a new storage pool with these 4 drives:
    HDD9-12 (new HDD and SP1): ST3000DM001-1CH166 CC29
    I have used diskpart to clean all 4 drives and the IX12-300r can see the drives just fine.
    When I try to make a new storage pool, naming it SP1 as the only storage pool is named SP0, I get an error: "Storage Pool Creation Failed"
    Please advise as to how I can get these drives up and running.
    Regards
    Kristen Thiesen
    adena IT

    I have pulled the 8 hdd from storage pool 0.
    Then I rebooted with the 4 new hdd in slot 9 - 12.
    Result: http://device IP/manage/restart.html, with the message: Confirmation required. You must authorize overwrite existing data to start using this device. Are you sure you want to overwrite existing data?k [yes] / [no]
    I then answer yes four times anticipating that each new drive needs an acceptance, but the dialog just keeps poping up...
    Then I shut down the device and repositioned the 4 new drives to slot 1-4 - but the same thing happened...
    Any suggestions?

  • WM: TO creation splitting per storage type

    Hi all.
    I would like to know how to split a GR in different TO and the different possibilities:
    per storage type
    one item (in material document)=one TO per item
    Is it customizing? Does a user exit exist?
    Many thanks in advance!!!!

    In config. see all the options under:
    Logistics Execution \ WM \ Activities \ Transfers \ Processing perf. data \ TO split
    Sort and split TO items
    You can assign a performance data profile to a transfer order with the movement type key, source storage type key or the destination storage type key. Since the storage types are on the item level rather than header level in the transfer order, an implicit split is executed for transfer orders with performance data profiles, which makes the performance data profile valid for all items.
    An explicit split may be preferable for organizational reasons. Some examples include executing a split according to picking areas or when a parameter barrier for volume, weight, or target time is reached. A suitable TO item sort is a prerequisite for a meaningful split.
    Regards,
    Nick

  • Troubles with the creation of New Custom Adapter for NW 7.1

    Hi guys !!!
    I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
    [Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
    note : 1004000
    I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
    S U M M A R Y
    ~~~~~~~~~~~~~~~~~~~
    Successfully deployed:           0
    Deployed with warnings:           1
    Failed deployments:                0
    ~~~~~~~~~~~~~~~~~~~
    1. File:C:Users
    maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
         Name:PI71_AF_myFirstCustomAdapter_ver_2.0
         Vendor:sap.com
         Location:SAP AG
         Version:7.1007.20090310105326.0000
         Deploy status:Warning
         Version:NEW
         Description:
              1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
         at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Result
    Status:Warning
    I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
    Antonello

    Hi,
    the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

  • New Field addtion for movement types

    Hi Everyone,
    I want to add new field for movement type 301(vendor material no)can you please guide me how to accomplish this task.
    Thanks
    Venkat

    Dear,
    Do the 311 movement through the MIGO and then set field for MIGO
    Vendor Material No.     GOITEM-IDNLF
    Vendor Material No.     GOSEARCH_PO-IDNLF as highlited filed in OMJX
    Or else with MB1b you can use the text fiied for Vendor Material no.
    Hope it will solve ypur problem.
    Regards,
    R.Brahmankar

  • Creation of new numbering interval for FI documents - FBN1 transaction

    Dear Experts, good day!
    When trying to create new numbering intervals for FI documents (FBN1 transaction), inserting the needed entries to a  customizing request (only those new entries, related to future years) and release it to the Quality environment, we have noted the new entries didn't get into the destination system.
    Have someone seen this before? Would you know why does that happen? How can we transfer the NRIV table contents to the other environments (Quality and Production)?
    Thanks a lot,
    Daniel.

    To copy number ranges to a new year you do with the transaction OBH2.
    When you want to transport number ranges you ask for problems. Only for a new implementation you can do it but not when there are existing number ranges with postings for that company

  • Creation of new T.Code for customization update

    Dear All,
    As per standard SAP, the below given configuration need to maintain directly in production system (not through transport).
    SPRO -
    > Logistics - General ---> Tax on Goods Movements ---> India ---> Master Data ---> Assign Users to Material Master Screen Sequence for Excise Duty ---> User screen reference
    The above cofiguration update the view V_USRM0_R. However as per my client policy, changes (configuration change) are not allowed directly in production system. All configuration change should be through SAP transprot. Also the view is not possible to maintain by T.code - SM30(since it is a cross client & we don't allow to chanage any cross client data). The above change we use quite frequently.
    Is it possible to create new T.Code for maintaining the above data? Mean to say, a new enhancement for maintaining view V_USRM0_R.
    Your input should be highly appreciated.
    Regards,
    sp sahu

    I got the answer

  • Creation of New T Code for Material Master

    HI,
    I have to create a new T Code for Material Master Change i.e. for MM02, with writing restrictions to few fields. How to achieve this? 
    Thanks and Regards,
    Hari Prasad.

    Hi Hariprasad,
    If restricting certain fields using field selection option is not suitable for you, you can go ahead with the option Screen Variend
    Also refer the link
    [https://wiki.sdn.sap.com/wiki/display/Snippets/Transaction%20Variant%20-%20A%20Step%20by%20Step%20Guide%20for%20Creation]

  • Creation of New T-Code for mass maintenance of SA

    SAP currently does not have a facility to mass-maintain schedule agreements.  The business alone has over 16,000 schedule agreement lines.  Manual maintenance is very time consuming.
    There are some key items of data that can require amendent for a particular vendor.  The new program would permit the maintenance of:
    Planned delivery time                EKPO-PLIFZ
    GR proc Time                           EKPO-WEBAZ
    Firm Zone                                EKPO-ETFZ1
    Trade off Zone                          EKPO-ETFZ2
    Binding Grp                             EKPO-KZSTU
    Conf Control Key                     EKPO-BSTAE
    Vendor Material number           EKPO-IDNLF
    Stock type                              EKPO-INSMK
    Creation profile                        EKPO-ABUEB
    approach  from my functional consultant:
    basically i want to update the fileds on a  screen of   tcode : memasspo (mass maintenance of purchase orders )
    if i select pur ord item in the initial screen,
    it allows me to enter pur doc values and item values
    after that
    if i select fields symbol button on left side
    and i can select  fields which i have to be updated  in the right side in the Popup screen
    if i choose fields they will come along with pur doc and item in the screen
    My question is :
    pur doc and item values  with additional fields data is available in the flat file that should be updated
    pl let me know the approach to upload whether i go for eigther BDC or BAPI
    Note :
    i can update for newly added fields  in the  user defined SAP Screen  itself for porders
    but if i enter the purchasing doc as scheduling agreement no it wont allow you  to update
    i need to update for Scheduling agreements ?
    <removed_by_moderator>
    Thanks in advance
    Edited by: Julius Bussche on Sep 3, 2008 9:56 AM

    Hi Hariprasad,
    If restricting certain fields using field selection option is not suitable for you, you can go ahead with the option Screen Variend
    Also refer the link
    [https://wiki.sdn.sap.com/wiki/display/Snippets/Transaction%20Variant%20-%20A%20Step%20by%20Step%20Guide%20for%20Creation]

  • Creation of new partner function for VENDOR

    Hi,
    I've a requirement to create some Partner functions for vendors while creation of vendor. Some Partner functions are available by default and some we need to add. but while doing a BDC we are not able to find how many of them are available or where to put the new Partner function?
    Please let me know, if there is any BAPI availble..
    Regards,
    Anupam

    Try below LSMW batch input method its very esay to upload data
    Object               0040   Vendor master
    Method               0001   Standard
    Program Name         RFBIKR00
    Program Type         B   Batch Input

  • Creation of New consistencycheck condition for Normal Correction

    Hi,
    We are using ChaRM normal correction to check the transport imported to production system we are using the check conditon 'PRODUCTION_IMPORT_OK' which is implemented in Class CL_SOCM_INSTANCE .
    On similar base we wanted to create the condition of 'ZTEST_IMPORT_OK' for normal correction, but we are not able to find the Standard code written for condition PRODUCTION_IMPORT_OK.
    If find this code we can make some adjustment in this code with BADI for consistency check to implement the new condition .
    Is any one worked on this type of condition , your help will be appreciated.
    Regards,
    Amar Kamat

    HI
    Check if needed to assign any account key to this new condition type in your procedure if needed, then mantain the GL acc for the same.
    If you are adding this condition type in your TAXINN procedure (assuming so) you need to create the condition type for the same by using trax FV11.
    If you are adding your condition type in Pricing procedure then no ned to create the condition record.
    Regards
    Sujoy

  • New account modifier for movement type 453

    Hi,
    I want to define new account modifier ZZZ in addition to the existing account modifier VAX for the account key GBB and movement type 453. Using SM30 i tried to update new entry  in V_156X_VC  but it is giving the error   "Target key must be different from source key"
    Regards,
    Guru

    hi
    Thanks for your reply.
    When We do sales delivery  (Movement type 901) .Normally system will take the  Account key (GBB) and account Modifier(VAX) .But as we are doing Free of charge delivery GL account(Eg 1000) should be different we defined account modifier ZZZ.When we take the  sales return for free of charge , movement type 453 will be triggered and account key (GBB,VAX) (VAX will have different account Eg.2000) .As GL account should be 1000 we want to create new entry 453,gbb.zzz
    Regards,
    Guru.

  • Creation of Multiple Account Groupings for Mvt.Type 201

    Dear All,
    We have one material code for a consumable material type and one valuation class attached to it. We have one Stock G/L account and multiple consumption G/L accounts. We need the post to multiple consumption G/L accounts and cost centre when we issue goods through Mvt.type:201.
    What are the configuration settings to be done to create multiple account groupings in SAP . ECC6.0.?
    Regards
    Saikat

    Hi
    For the scenario described by you, you need not have to make any config settings. The G/L account defined in SPRO (Valn and Automatic Acct Determination) is used for Automatic Account determination i.e. when you do not enter a specific G/L account during Goods Issue.
    As can be seen from your query, you want Consumption account to be posted to different G/L accounts but the material is assigned only to 1 Matl type. There are 2 ways to solve this problem:
    1. If you know the G/L accounts that the system should post to before hand i.e at the time of Matl creation itself, then you can configure Split Valuation and then assign more than 1 Valuation class to the Matl. For each of these Valn classes, you can configure Automatic Account assignment. By doing this, at the time of Goods Issue, the system will ask you the Valn type and will accordingly post to a seperate G/L account.
    This is possible only if the no of G/L accounts per Matl is less (preferably 2-3)
    2. If you do not know the G/L accounts before hand or the G/L accounts per Matl consumption is too many, then it is better to go for Manual Automatic Account assignment.
    In this procedure, at the time of Goods issue using Mvt type 201, you can specify the G/L account and Cost Centre in Th Account Assignment Tab.
    Hope this clarifies.
    Thanks

  • F150 Dunning creation without increase Dunning level for document Type

    Hellò everybody,
    I have this request , How I can  do a dunning Letter  and for a specific Document type  , must have always a Dunnng level 1 . I mean do not increase the Dunning Level every time.
    For istance :
    Every week we make one dunning run. This run has to include all open invoices from ordinary deliveries (dunning level 1 to 3) and also  the open invoices for a specific Document type  (dunning level 1).   This Specific doc.type have not dunning level 2 or 3 .
    I have check on BTE and I have update  00001051 DUNNING: Read additional fields for MHND (BSID)  with this Abap code :
    IF I_BSID-BUKRS = 'KC01'.
            IF I_BSID-BLART = 'B2'.
          IF C_MHND-MAHNS IS NOT INITIAL.
            C_MHND-MAHNN = C_MHND-MAHNS.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDFUNCTION.
    But nothing happen ...
    Who can help to me ?
    Thanks in advance for everythings.
    Anna Rosa

    Hi Vassy , thanks for your prompt answer ,  I explain better with example :
    first time  Dunning  :  Customer AABB
    Invoice 1  100   lev 1    Special Invoice
    Invoice 2  200   lev 1
    Invoice 3 300    lev 1
    The Customer do not pay nothing
    Second Time Dunning Customer AABB
    Invoice 1  100   lev 1    Special Invoice
    Invoice 2  200   lev 2
    Invoice 3 300    lev 2
    Thirt time Dunning Customer AABB
    Invoice 1  100   lev 1    Special Invoice
    Invoice 2  200   lev 3
    Invoice 3 300    lev 3
    I mean in the same Dunning letter for invoice 2 and 3 the level Dunning increase(as usual)  for Special Invoice number 1 the Dunning Level   still remain 1.
    I know that I can change Manually on open Item the Dunning level but I looking for if it's possible to this automatically.
    Thanks a lot.
    Cheers.
    Anna Rosa

Maybe you are looking for