Creation of one single config file for 100 packages

Hello Everyone,
I need to create a single config file for multiple packages. Is it possible to do it?
Could you please let me know how can it be achieved?
Regards,
Chinni

Its possible
Depending on whether all packages contain same configuration items and names you can use any of below approaches
1. If all package configuration items and names are same, you can point all packages to same config file and it will use values from file for all of them
2.If packages have different set of conigurations, then one method is to use parent package (wrapper package) to call and execute all of them. Then define all configurations as variable values in parent and add a config file in it. Pass only required configurations
to each of child packages by using parent package configuration method.
http://www.sqlis.com/sqlis/post/Using-Parent-Package-Variables-in-Package-Configurations.aspx
The parent package has to call child packages using execute package task
Then change any of values in your config file for parent package and change gets reflected to child package property values.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Similar Messages

Reset config files for a package

According to https://wiki.archlinux.org/index.php/Pa … save_Files I have this situation in my config files:
original = X, current = Y, new = X
Is there a way to set current config files of package to X and save Y as .pacsave OR install X as .pacnew and leave Y in place without removing package?
Last edited by Evgeniuz (2012-03-12 22:00:00)

I'm not positive I'm understanding you right, but if I am and you are talking about basically backing up a package's config file, it is pretty simple. I believe the .pacnew and .pacsave refers to changes in the makeup of a package in general, not its config file.
To change back to the original config and save the modified version you can just add .backup or anything onto the end of the file that you don't want to use right now . Then, you just need to save the file that you want to use as the config file with wthe filename of the configuration file for that package (so the same but w/o the .backup).
Sorry if I am misunderstanding you and you really did mean .pacnew or .pacsave and not config files. Or if I am totally wrong but that is my understanding of config files and I know it has worked for me in multiple instances.
~Boz~

How to create per instance jvm.config files for multi-instance ColdFusion Cluster ?

So when we have created our coldfusion 9 instance on solaris all the files and settings of the master instance are copied except the jvm.config file. This means that any changes made here are used for all instances of ColdFusion on that Node. Now I want to play with memory settings for fine tuning of Application performance and I want to do it on one single instance. I want to know the process of creating individual jvm.config files for each instance.
Thanks
Pradeep

Thanks Anit, I did whatever is posted in the KB Article. Now I get this below error #
jrunx.xml.XMLMetaData$CouldNotCreateDocumentException: Could not create document from location 'file:/data/www/appserver/jrun/lib/servers.
xml'
        at jrunx.xml.XMLMetaData.createDocument(XMLMetaData.java:1028)
        at jrunx.xml.XMLMetaData.importXML(XMLMetaData.java:200)
        at jrunx.xml.XMLMetaData.<init>(XMLMetaData.java:122)
        at jrunx.server.metadata.ServersMetaData.<init>(ServersMetaData.java:32)
        at jrunx.server.ServerManagement.refreshServersMetaData(ServerManagement.java:82)
        at jrunx.server.ServerManagement.getServerRootDirectory(ServerManagement.java:154)
        at jrunx.server.ServerManagement.getServerProperties(ServerManagement.java:191)
        at jrunx.server.ServerManagement.getSystemProperties(ServerManagement.java:204)
        at jrunx.kernel.JRun.setSystemProperties(JRun.java:688)
        at jrunx.kernel.JRun.start(JRun.java:337)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at jrunx.kernel.JRun.invoke(JRun.java:180)
        at jrunx.kernel.JRun.main(JRun.java:168)

How can spwan out parallel HBR in one single batch file?

We have several Hyperion business rules to be executed at night batch. To ease the control and management, we put all business rules under one single batch file. However how can we spawn out different business rules so that these rules can be executed in parallel?
We are using Windows Server 2003, Scheduled Tasks with Essbase ver 11.1
Thanks!

CL wrote:
R1 and R2 can in parallel and but must finish before R3 and R4?
Can you START /WAIT a batch that then spawns two more START sessions without a /WAIT?
Do that twice and you will get rough parallelism.
Failing that, why not just use an OS scheduler? Have the first processes write completion logs. Time the second so that the first should be done, but put in a loop that looks for FILEEXIST.
Lots of ways to approach this. Scripting this stuff is always fun.
Regards,
Camerin LackpourThanks! Yes there are lots of ways to handle with batch scripts. Windows default Scheduled Tasks does not have dependency checking function and needs to write scripts to check something e.g. the log file.

Create single .folio file for desktop viewing

Hi,
I need a bit of help here please. We are currently on issue 2 of our iPad magazine: https://itunes.apple.com/gb/app/absolute-photo-magazine/id719597521?mt=8
We are trying to create a version of our app that Advertisers can view on all platforms (iPad & Desktop). What we have done is created a delegate account and from the folio builder panel, we have shared the specific folio with that delegate and emailed the login credentials to certain advertisers. This allows them to view it using Content viewer on an iPad.
I am also trying to export the .folio file in order to send this out to specific people to view using Content Viewer on desktop (PC & MAC). In the example here http://www.e3zine.com/desktopviewer.html there is a single .folio file but when I use the export function within the Publishing Suite it exports a zip file which contains all articles as individual .folio files. Is there any way of exporting this folio as one single .folio file?
Thanks
Dean

Hi,
Thanks for your response. I will try the solution for windows users. However, for Mac desktop users this is supported by DPS as shown in this example:
http://www.e3zine.com/desktopviewer.html where I was able to download a .folio file and preview it in Content Viewer on my iMac. I have been able to export my published folio from the publishing suite into a zip folder on my desktop which contains a series of .folio files that are all viewable within content viewer for desktop. The question is how to create one single .folio file like in the example rather than a series of .folio files?
Thanks
Dean

Single setup file for BPM Suite 11g or later

Hi
Please tell me where to find a single setup file for Latest Oracle BPM Suite.
I could not install all required software with multiple setup files.

Hi
1. Sorry. There is Nothing single setup file for Oracle BPM Suite like you are expecting for any typical software application.
2. Option 1: Yes. If you are familiar with VM Ware and virtual machine, then you are ok to some extent. Oracle do have like a single vm image that takes care of all you want. Provided you have VM installed. Means we do have an image that contains all pre-requisites and full oracle bpm software like Oracle XE, RCU, WLS, SOA/BPM on top of WLS, BPM/SOA Domain. But this is for advanced and not for beginners unless you know VM Ware and virtual images.
3. If you are a java/j2ee developer/architect, then here are the steps for installation:
a) Good machine with atleast 8 GB RAM.
b) Install WLS Latest Version. Install SOA/BPM matching version on top of this WLS.
c) Install Oracle XE Database or have access to already installed regular Oracle 11g Database.
d) Download RCU same version as above of soa version and unzip and install in the above Database. I am not giving all steps. Just an overview.
e) Now run config wizard, create a bpm/soa domain and refer above rcu details (soa_infra, mds etc). You will have a soa/bpm domain.
f) Download and install JDeveloper IDE same matching version. Here you will create any soa / bpm / bpel applications. Once all done. Deploy on the above created domain.
So unfortunately, there is nothing like a single .exe or setup file to install oracle bpm/soa. The closest is a vm image which is kind of advanced. But for a normal typical software developer, you had to follow above step 3 (a to f).
Unfortunately if you do not have Virtual Machine, you should and must install all the software(s) and configuration(s). There is no other alternative. Its very simple either way.
Thanks
Ravi Jegga

Change the kernel26 config file for ati users?

Hi,
To get the propriatary ati drivers working you need to change some parts of the kernel from build in to module. What about changing this in the standard kernel26 so that this will make it easyer to install ati drivers (and update the kernel) for a lot of users. I think it isn't hard to change because the config file is kernel26 package.
I don't know much about kernels and stuff so I don't know if it will be negative for some users? Else of course it shouldn't be changed because only a small percentage of arch users use propiatary ati drivers.
Please give me your opinion about this
David
edit: typo

I don't think that Xentac wrote that, in this thread qwerty wrote it, or is this the same person?
In that thread is also the reason why they need to be modules, the propriatary ati drivers interact with the AGP modules from the kernel. For some reason this doesn't work when they are compiled in the kernel. Shall I send qwerty a message if he can explain better why modules are needed?
Also I'm trying(never made a PKGBUILD...) to merge the two PKGBUILDS from that howto in one so that in the future to install ati drivers one can just type pacman -S ati-drivers, add the module to rc.conf and change xorg.conf to get it working, that should be really cool I think
edit: I just found out this isn't needed since I found ati packages in link's reposatority! The only strange thing is that they depend on an older kernel

Concatenate multiple pdf files into one single postscript file

Hi,
Could anyone help me with a code to "Concatenate Multiple pdf files into one single postscript file" ?
Thanks for the help

Thanks for your reply! Actually the main purpose is to allow user to select multiple pdf documents on a single web page and then he should be able to print all of them at once by hitting the print button on the web page instead of selecting each document seperately to print it. Also he should be able to see all the printing services available to print those documents.
Thanks,

[svn:osmf:] 13604: Update build-config files for sample plugins.

Revision: 13604
Revision: 13604
Author:   [email protected]
Date:     2010-01-18 17:09:32 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for sample plugins.
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml
    osmf/trunk/apps/samples/plugins/MASTSample/MASTSample-build-config.xml

Thanks Brian. I would certainly appreciate the maintenance and documentation of some of these. The one that most comes to mind is the OSMFTest suite. This would be valuable if only so that developers have some idea of the coverage that's going on under the hood. It would also help for diagnosing what's going on when behavior is not as expected. I was pleased that when I figured out how to compile this directory, I could see that there were 1109 tests, all of which passed except for one that failed due to not being on my local security whitelist.

[svn:osmf:] 13605: Update build-config files for libs.

Revision: 13605
Revision: 13605
Author:   [email protected]
Date:     2010-01-18 17:10:01 -0800 (Mon, 18 Jan 2010)
Log Message:
Update build-config files for libs.
Modified Paths:
    osmf/trunk/libs/VAST/vast-build-config.flex
    osmf/trunk/libs/VAST/vast-build-config.flexcov
    osmf/trunk/libs/VAST/vast-build-config.xml
    osmf/trunk/libs/adobe/NetMocker/netmocker-build-config.xml

Thanks Brian. I would certainly appreciate the maintenance and documentation of some of these. The one that most comes to mind is the OSMFTest suite. This would be valuable if only so that developers have some idea of the coverage that's going on under the hood. It would also help for diagnosing what's going on when behavior is not as expected. I was pleased that when I figured out how to compile this directory, I could see that there were 1109 tests, all of which passed except for one that failed due to not being on my local security whitelist.

Cannot get Membership Provider with name RoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.

I am trying to create a web application that uses AD LDS as its authentication provider. I have followed all the steps and verified all the web.config files, but I receive the error below:
Cannot get Membership Provider with name CustomRoleProvider. The membership provider for this process was not properly configured. You must configure the membership provider in the .config file for every SharePoint process.
Has anyone come across this error before?

There seems to be some issues in your web.config files. Please make sure your Web application entries for membership and role provider(at central admin site) are matching with Web.config entries. your error
"Cannot get Membership Provider with name CustomRoleProvider.
", indicating that you may have used role provider name in Membership provider text box or in web.config.
Also please make sure that you have correct entries in all 3 web.config files - Central Administration , Security Token Service (STS), Web application .
Please refer -
Forms Based Authentication (FBA) in SharePoint 2013
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

[svn:osmf:] 14412: Added the Syndication. swc to the command line build config file for the AkamaiPluginSample project .

Revision: 14412
Revision: 14412
Author:   [email protected]
Date:     2010-02-24 17:48:22 -0800 (Wed, 24 Feb 2010)
Log Message:
Added the Syndication.swc to the command line build config file for the AkamaiPluginSample project.
Modified Paths:
    osmf/trunk/apps/samples/plugins/AkamaiPluginSample/AkamaiPluginSample-build-config.xml

I think it is not supported through ant script and you may have to contact Oracle Support. Please go through below thread (hisaak's reply) -
Re: Export OSB configuration jar file using Ant
Regards,
Anuj

Where is config file for port 5500 ??? Help

Where is config file for port 5500 ??? Help
Hello I have 10g_win32_db, and I want to change the http://localhost:5500 to something else where can i find the config file for that ?
thanks

To modify port 5500:
- Modify the file $ORACLE_HOME/<hostname_sid>/sysman/config/emoms.properties
Change the ConsoleServerPort property to the new port.
- Modify the file $ORACLE_HOME/<hostname_sid>/sysman/config/emd.properties
Change the REPOSITORY_URL property.
- Modify the file $ORACLE_HOME/oc4j/j2ee/<hostname_sid>/config/http-web-site.xml
Change all references of the old port to the new port.
Restart the DB Control process:
emctl start dbconsole

[svn:osmf:] 13633: Add build config file for SMILPlugin project

Revision: 13633
Revision: 13633
Author:   [email protected]
Date:     2010-01-19 14:23:44 -0800 (Tue, 19 Jan 2010)
Log Message:
Add build config file for SMILPlugin project
Added Paths:
    osmf/trunk/plugins/SMILPlugin/SMILPlugin-build-config.xml

Hi mg30,
There is no way to overwrite the XML configurations file just through modifying the SQL Server Agent job steps. The Dtexec utility will apply the default package configurations for the second time after applying the options specified in the command
lines or other package configurations configured in the job step.
If the package is not deployed/installed, the Dtexec utility looks for the XML configurations file according to the file path defined in the Package Configurations Organizer window. In this situation, you need to either disable the package configurations
or modify the XML file path in the BIDS.
If the package is already deployed/installed, you need to modify the package as above or re-specify the install folder for the package configurations file.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

UWL config file for Customer, Vendors and Materials

Hello All,
We are trying to integrated uwl to connect to a MDM system for objects Vendors, Customer and Materials. I have looked at the MDM UWL config file, it is configured only for Business partners and products.. does anybody have the config file for Customer, Vendor and Material using business content..
Thanks in advance
Som

Hey Som,
If you are talking about Portal UWL, then you have to go for System Admin, there you should see UWL related iviews. There you have the ability to download the uwl xml. in that you have to do some modifications.
All that matters for your problem is the MDM System you have created. when you chanage the respository informatin at this system. then your problem should be solved.
Thanks,
Raghavendra

Creation of one single config file for 100 packages

Similar Messages

Maybe you are looking for