CREATION OF 'PB' INFOTYPE
HI ,
I AM ABLE TO CREATE THE ''PA'' INFOTYPE BY USING''PM01''
BUT,
I AM NOT GETTING HOW TO PROCEDE FOR ''PB'' INFOTYPE PLZ LET ME KNOW,
THIS IS VERY URGENT,
THANKS IN ADVANCE ,
SAI
Hi Sai Krishna,
Take your time to see detail information to create Infotypes, The following liks will give you detail understanding of infotype creation - Applicant Infotypes & Personnel Infotypes
1. http://www.sapdevelopment.co.uk/hr/hr_infotypes2.htm
2. http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
3. http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP_PD.pdf
4. Photograph and PM01
Sure, It will help you & it will slove your problem..!
Cheers,
TG
Similar Messages
-
Creation of HR infotype with repeated fields
Hi,
We have a requirement in our project where in we need to implement the repeat field screen structure.
We have to create an info type with 96 fields in which some of the fields are repeated more than once.
We have tried to create a table control to represent the repeated fields, for this we have a standard way which SAP follows. We have done the same way but we are not able to get the table control in the info type screen.
We have done the following steps using this link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/d52552575e11d189270000e8322f96/frameset.htm
1) I have created a structure with the repeated fields of the info type
2) created the entries in Mapping for Conversion of Repeat Structure/Tables (table T588AUTO_MAP) with the repeated fields
3) For each type LINE screen structure to be used, a corresponding entry was defined in Mapping for Conversion of Repeat Structure/Tables (table T588AUTO_TABLE).
4) I have created an info type with all these fields where in I should get the repeated fields in the table control format, but this was not happening.
Is there any task to be done to link all these transactions before going for creation of the info type?
Can any one suggest me how to get the table format on the screen with all these repeated fields.
with regards,
ramu mullapudiHi Choudhury,
Thanks for your reply. The infotype that you suggested solved my problem.
Regards,
RSS. -
Creation of new Infotype Important
Hi All,
I am using the table control for my Infotype creation. i linked the internal table with the table control wizard. I added a check box in the table control ( which is not there in the internal table). i need to access this table control check box. how can i make it.
Do i need to include the check box value in it.
Please Kindly help me to solve this issue
Thanks
Yogesh.it will be a complex logic as such... Instead try using the same in internal table so that u can use it in a simple code manner...
Award Points and close duplicate threads... -
Why the creation of a infotype is not traced by infotype change log report?
Hello Experts,
I triggered the trace of IT655 change for infotype auditing report RPUAUD00. But I found out if just create the infotype with a certain start date without changing any field, this creation cannot be picked up by the report. Is this normal or not? What else I can do to trace the creation also?
Thanks,
AllanAllan - We are having a similar issue with Events (0000) infotype? Did you apply note 44206 in your system?
If you applied the note, did the developer implement the changes to the 2 Standard SAP programs (per note 44206)?
If you didn't apply the note, how did you resolve the issue of the trace within the infotype?
Any response is appreciated. -
Creation of Secondary Infotypes
Hello gurus,
I have to create secondary infotypes for IT0021 for the country Sweden. I am trying the transaction code PM01....but I don't get to see the IT View option in the menu so as to initiate secondary infotype creation.
Request your urgent help.Hi
Having not worked on a Swedish project can't say that I know what you actually require, however SAP make it fairly clear about not creating your own IT view.
Standard settings
SAP delivers infotype views for several chosen infotypes - especially for
those of relevance to the German civil service.
Activities
Do not create any of your own infotype views.
Do not change the settings for assigning infotypes and views.
If it is a legislative requirement it should've been delivered by SAP, if it's a new legislative type requirement it should be delivered by SAP although I can't find any recent OSS note covering this. The standard SAP help also doesn't mention any country specific requirements with regards to Sweden and IT0021.
Cheers
Euan -
Doubts in CREATION OF 'PB' INFOTYPE
hi i created infotype but while executing this in pb30
it is showing the error like.....
""""""P9030" must be a flat structure. You cannot use internal tables,
strings, references, or structures as components"""""""".
now how can i procede,
plz let me know ,
this is very urgent ,
thank you ,
sai.Hi Sai Krishna,
Take your time to see detail information to create Infotypes, The following liks will give you detail understanding of infotype creation - Applicant Infotypes & Personnel Infotypes
1. http://www.sapdevelopment.co.uk/hr/hr_infotypes2.htm
2. http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
3. http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP_PD.pdf
4. Photograph and PM01
Sure, It will help you & it will slove your problem..!
Cheers,
TG -
Hi all,
I have a requirement wherein i need to create a infotype.
In this infotype if the Anzhl value of absence quota type is reduced the relavent quota types which are linked to it should also get reduced.
Actually when a leave is approved, the quota is reduced and reflected in 2006 only but here in my case it should get reflected in the new infotype also by creating a seperate record with the entitlement and reduced values.
for ex awart1
suppose for 20 days is reduced from awart1. Awart2 and awart3 are linked to awart1.
simultaneously 20 days quota needs to be reduced from awart2 quota, as well as some 5 days from awart3.
so there will be two records of this new infotype
and also, the ANZHL of the relevant quotas will be reduced
when the leave gets cancelled, these two records will be deleted and quota will be reinstated back
Please help me by providing pointers in this regard.
Thanks in advance.
Regards,
Durga.Hi
use the t-code PM01 to create new custom infotype..i wiht in 9000-9999 number range..
Have a search on SDN for the same..............therea re lots of thered for the same...
..lakhan -
Hello Experts,
I need to create new infotype ,which will be replica of Infotype-0008(basic pay). user can enter the wage types in that custom infotype.
is it possible????
Thanks & Regards,
Saurabh"there are some employees who works extra apart from their regular position "
questions:
1. "there are some employees "--> do they have specific characteristic?
2. "who works extra apart from their regular position"-->
is the extra salary payment will be included in their regular payroll or will be paid separately or it is only to record the "extra work"? or
"work extra" is it a form like overtime payment?
if it will be included in the salary payment, you can create new wagetype and include it in in IT0014-IT0015 depends on the regularity of the payment.
"currently in custom infotype there is only limited information ie. position and pay scale area, groups n all and cost centers.."
did u mean "currently in IT0008" there is only limited info (position, pay scale area, groups ...)
please check or consider to use IT0014 and IT0015 -- sap standard infotypes for other extra payment not included in the Basic Pay.
best regards,
dhenny muliawaty (pei pei) -
am trying to create the new infotype 9001 (PM01) for license but SAP not allowing.. asking access key to proceed further.. wot to do?
Shanand also check this
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level -
Creation of Customized Infotype
Hi,
I have created an infotype, for which i have designed screens in SE80. But still When I execute the infotype in PA30 Transaction, I am getting an error saying that
Screen MP902400 2000 must not be an Include screen.
I am new to this HR module. Please give me a solution to solve this problem.
Thank You.
DhanaLakshmi M SThe screen type was selected as Subscreen instead of Normal screen.
Thank You.
DhanaLakshmi MS -
Hi All,
With the help of the following link I tried to create a OM infotype
http://www.sappro.com/downloads/jan07/OMinfotypes.pdf
I want to create a OM infotype ( 9000 ),
I had created a structure HRI9000.
In transaction code PPCJ Infotype name was given as 9000, once I click create button following error log appears, please let me know am I missing anything over here.
Infotype 9000
Dictionary
Structure HRI9000 exists
Structure P9000 does not exist
Table HRP9000 does not exist
HRP9000 not created in the database
Database index XXXX not created
Module Pool
Module pool MP900000 does not exist
Include MP900020 does not exist
Include MP9000BI does not exist
Screens
Screen 1000 does not exist
Screen 2000 does not exist
Screen 3000 does not exist
User interface
User interface for MP900000 does not exist
Table entries
T778T: no table entries exist
T777T: Table entries exist
T777D: no table entries exist
T77ID: no table entries exist
T777I: no table entries exist
T777Z: no table entries exist
T77OA: no table entries exist
T777M: no table entries exist
T778U: no table entries exist
T777U: no table entries exist
T77NI: no table entries exist
SOBJ entries
OBJECT PDST: no table entries exist
OBJECT PDWS: no table entries exist
Dialog module
Dialog module RH_INFOTYP_9000 does not exist
TADIR entries
R3TR TABL HRI9000 exists
R3TR TABL P9000 does not exist
R3TR TABL HRP9000 does not exist
R3TR PROG MP900000 does not exist
R3TR PROG MP900020 does not exist
R3TR PROG MP9000BI does not exist
R3TR DIAL RH_INFOTYP_9000 does not exist
Thanks,
S. SudagarDear All,
Still my problem has not solved.
I am getting following Error. So please let me know soution for it.
Infotype 9880
Dictionary
Structure HRI9880 exists
Structure P9880 exists
Table HRP9880 exists
HRP9880 not created in the database
Database index XXXX not created
Module Pool
Module pool MP988000 does not exist
Include MP988020 does not exist
Include MP9880BI does not exist
Screens
Screen 1000 does not exist
Screen 2000 does not exist
Screen 3000 does not exist
User interface
User interface for MP988000 does not exist
Table entries
T778T: no table entries exist
T777T: no table entries exist
T777D: no table entries exist
T77ID: no table entries exist
T777I: no table entries exist
T777Z: no table entries exist
T77OA: no table entries exist
T777M: no table entries exist
T778U: no table entries exist
T777U: no table entries exist
T77NI: no table entries exist
SOBJ entries
OBJECT PDST: no table entries exist
OBJECT PDWS: no table entries exist
Dialog module
Dialog module RH_INFOTYP_9880 does not exist
TADIR entries
R3TR TABL HRI9880 exists
R3TR TABL P9880 exists
R3TR TABL HRP9880 exists
R3TR PROG MP988000 does not exist
R3TR PROG MP988020 does not exist
R3TR PROG MP9880BI does not exist
R3TR DIAL RH_INFOTYP_9880 does not exist -
Custom fields on OM to trigger creation of 0001 infotype record
Hi Everyone,
I need to resolve this as soon as possible.
I have a requirement as follows:-
There is a Custom infotype with 2 fields on a custom tab on Position level in OM.
Now, when there is any change to the field contents and the validity dates, the integration should be triggered alongwith creating a corresponding entry in 0001 infotype in the background, just like it happens for all the other tabs/infotypes in OM.
I already found a BADI, HRBAS00INFTY which enables me to change the code before updation of the database.
Please let me know how to create the Info type 0001 records once the custom fields and validity dates are changed.
Thanks and Regards,
Pankaj.Hi Pankaj,
Use the FM HR_INFOTYPE_OPERATION to update 0001.
Regards
Bala -
Creation of Custom Infotype in Recruitment
Hi Experts,
I have actually used PM01 to created Custom infotype. i have selected the applicant group while creating the infotype.. but in the infotype charectaristics the database table is still PA9006 this must be changed to PB.. how do i do this???? And my 9006 infotype in not reflecting in the applicant master data.. how to do this?????hi,
i think you select pa infotype while providing time constraint, insted of selecting pa infotype select RE infotype or
follow this procedure......
1)in step one you create STRCTURE with required fields and make it activate
2) in this step simply click on CREATEALL BUTTON for creating module pool program, database table and screens.
3) in this step select NEW ENTRIES button and here provide information like ...
if you are not find new entries button click on EDIT button.
a)provide Infotype number ( which is created by you. 9006)
b)provide description
c) provide time constraint
d)provide single screen(2000) and list screen(3000)
now click on SAVE button then system automatically assigns the application database table PB9006.
regards,
Ashok
Edited by: Ashok Reddy on Jul 1, 2008 5:45 PM -
Hi Guy's,
Please help me How to create the Custom Info types in Campus management(Step-by-Step) procedure.
Thanks,
Bhavani.
Edited by: Michael Fan on Mar 13, 2008 2:33 PM - I changed to title to something more meaningful.Hi ,
For OM infotypes it is PPCI and PD infotypes it will be PM01.
Just find this in the ERP HCM where you can find the links .
Refer this link :
http://help.sap.com/erp2005_ehp_03/helpdata/EN/1e/728d281d5e11d289d30000e82158f1/frameset.htm
Regards
Gajalakshmi -
How to restrict change/creation of Infotype record after termination action
Hi All,
Based on my client requirement, we have to restrict any change or creation of certain infotypes after performing termination action.
For Ex:- Suppose termination date is 01.01.2008. End user should not able to change or create any new record for infotype 0001, 0008 and 0016 after 01.01.2008.
This is very critical. Request your valid input ASAP.
Thanks in advance.
Regards,
PurnimaHi Sreenu,
Thanks for your valid input.
I tried by giving "EDQ". Then I got below mentioned error while performing termination action.
Error:- "Status EDQ of the user interface MP000100 missing"
Can you help please?
Regards,
Purnima
Maybe you are looking for
-
Kisight:- If I Don't Have or Want to Use My iSight What Can I Use ?
kisight:- If I Don't Have or Want to Use My iSight What Can I Use ? Or What Cameras are available for Macs ? This question used to come up for Macs that did not have Internal Cameras and the User did not have an External iSight. Since the advent of I
-
Safari can't verify indetity of website.
I have a powerbook g4 and wireless internet. I visit the website neopets allmost every day to chat on the message boareds there and i just started getting a little pop up saying Safari can't verify indetity of website, it gives you two opisons to can
-
Open Image Size 50% instead of 33% Photoshop CS2
When I open images in Photoshop CS2 they open at 33%. As I have a 19" screen and edit 100's of images a day I would like to change the "default" to open the images at 50% instead. Occasionally they open at 50% automatically but I don't know what I've
-
This problem with screen going black is a recurring issue, apple us troubleshooter this with me and replaced my phone already for the same issue, new phone doing same thing. Is this a problem for others also?
-
I just deauthorized all other computer and authorized this one. When I try to synch my music it says it will delete all my music and replace it with stuff from my itunes library. This computer doesnt have anything in the library. is it safe to synch