Creation of PO only for one particular storage location

Hi Friends
One of my material is extended to four storage location within a plant say S001 S002 S003 and S004 but here requirment is at the time of raising PO for this material,system should always propose only one particular storage location say S001. Is this possible
Need your guidance
Regards
VS

Hi supergene
system will never propose particular storage location based on material.
May be u can add particular storage location in <b>personal setting</b> so that for all PO it will be picked as default storage location.
system will propose storage location at the time of GR based on storage location maintained in Material master
Or
you can use the authorisation object M_MSEG_LGO. To restrict users from using storage location other than which they have authorised for
Vishal...

Similar Messages

Stop billing(sales) for a particular storage location.

Dear experts,
How can we stop billing to the customers completely for a particular storage location.
please suggest...
thanks in advance.
Regards

Hi,
This can be achieved by restricting the authorisation for that particular Sloc in VF01 which restricts from billing w r t that particular sloc.
Thanks

How to restrict Availability check for a particular storage location

Dear all,
As per the Business requirement, System should not consider the stock in a particular storage location.
while sales order creation, system should not confirm the requested delivery date based on the stock available in that particular storage location.
How could we map this requirement in SAP, Please educate me to resolve this issue. Your suggestions will be highly appreciated.
Thank you,
Raghu Ram.

Dear Lakshmipati,
as you said correctly this storage location is there in MMSC for the article which we are using in Sales Order.
I have tried to delete this storage location but system is not allowing to do so.
I could not understand, from where this storage location is being determined. we have not mentioned any where in article master data.
please help us to resolve this issue, and thanks for your help in advance.
thank you
Raghu Ram

Imessage is not working, but only for one particular contact.

I cannot send/recive imessages from one particular contact, messages are sent as SMS. All other contacts are fine with imessaging, so why just this particular one? Please help??!!

If you can send imessage to other users execpt for this one particular person. Then the issue would be with him/her and not your phone. That person will have to figure out whats going on.

Planing via MD01 only for one storage location

Hi!
I have the following setup:
Plant p1 has storage locations sl1, sl2, sl3, ... sl9
In transaction mm43 (display retail material) I can see the following setup of the material:
Dispositionsparameters:
-MRP Type V2, ... and so on
Behind Button MRP/Forecast Data I can switch to for example storage location sl3 and there I can see
Storage Location MRP:
-SLOC MRP indicator = 2
-Reorder point = 50
-Replenishment qty = 70
I think its meant like the following: if the material in storage location sl3 is equal or below 50 then there will be a goods movement from the "main storage location" to the storage location sl3 with 70 pieces of the material. Afterwards there would be 130 in the sl3.
Maybe its a good thing to run "the report" every day in the evening so that the sl3 location will be filled up every day if necessarily.
Now the questions:
Is the transaction MD01 "the report"? I have no chance of setting up the storage location there.
Where can I check whats the "main storage location", the location where the replenishment comes from?
Some of my colleagues mentioned the Transaction MB26 where they check the planed for replenichment materials. Is this at all usefull in this context? They told me the list is reacting very slow... so if they run out of stock of some material then "the list" recognizes this 2 or 3 days later.
I am looking forward to your answers!
Regards
Manfred

What you setup in OMIR will just be the default for a material master created after this customizing, when an existing material will be extented or a new material will be created.
It does not impact the MRP run directly.
You have to maintain the MRP view in your existing materials for the desired storage location as well. There you have to enter this MRP indicator manually or with MM17.
However, the MRP will in general run per plant, for all locations, it will just plant the locations separatly if the indicator is set.
If you really want an extra run per storage location, then you have to use the user exit (you see the 2 fields at the bottom of the MD01 screen).
the user exit has to be customized in IMG > production > MRP > planning > user exit material seelection

How to approve the request only for one time for human task in BPM Worklist

Hi All,
I'm having a requirement where i have made the hierarchy in the .task file where in created two users for which i need an approval in a hierarchical manner. But when i'm approving the request from worklist app for one user and the request is going sucessfully to the second user and if i approve it over there it once again coming to first user where i have approve it once again to get the request processed. how to get request processed only for one time when it is approved. Do we need to customize anything
If you did it can anybody can share thoughts on this please. Your help is highly appreciated.
I am not able to see the rejected request at all. where to see the rejected request.
Regards,
CH

Hi,
Following are the some important points you should understand about ESS Leave Request Workflow
1. The Visualization ( how should it appear in UWL and what should happen when you click on a particular workitem) is defined in SWFVISU. Check for TS12300097. Generally, it invokes com.sap.xss.hr.lea.appl/LeaveRequestApprover Java WebDynpro application. Just check whether you are able to get the correct Leave Processing application called when you execute your workitem from UWL?
2. In general it should have option to process the leave request either approve/reject. When the leave request gets approved/rejected the status of the Leave Request document gets changed ( in workflow it is &REQ.STATUS&
3. There is a need to schedule a background job for program RPTARQPOST which will pick up all the documents in APPROVED status and creates an absence record for the same.
4. Apart from schedule job as mentioned above, you also have to schedule a background job for program RPTARQEMAIL, which is basically used to send e-mails for all the documents which are yet to be approved to correct manager.
as you say , you can not see Approve/Reject options from UWL, it looks to me that correct javawebdynpro application is not being called for this task. Just check this !!
Good Luck !!
Regards
Krishna Mohan

Query not executing for one particular value

Hi
I have query on multi provider. and this multi provider is combination of Info objects only but not any ODS or cubes. I have one key figure in this multi provider.while executing the query i need to give input for variabl which has 7 different values. Query is executing fine for 6 values but not for one particular value.
query executed in listcube transaction and it is executed fine here for the same selection. then what might be the reason?
Please advise as soon as possible.
Thanks

Hi Kiran,
are you maintaining any filters in the query? or is there any logic in the exit for this variable.
regards.

EDI message is not sending to the third party for one particular SA

DearAll,
We have the scenario to send the schedule lines to the third party system. for one particular schedule agreement schedule lines not sending to the third party system.
while processing the messgae it is giving the error as "Message XEDI already processed on 20110317 070042"
What could be the reason?.. we have checked all the EDI settings maintained for this supplier. some two weeks back there is no problem now only getting this message.
how to resolve this?..
Thanks in Advance
Ananth.

Hi Hareesh,
Thanks a lot for the help. I have tried with removing the xml namespace, still the same result. I believe, the problem is with MTs tag in response message structure, bank xml data is trying to map with the response structure in PI, but when its finding the MTs tag I believe then its not mapping, and directly its passing the response in SXMB_MONI without any mapping.
My question is how can I define my response structure without the MTs tagm, I mean same as what I am receiving from bank.
Also I tried with without any mapping in response structure, I mean I used only one Message type for "response from bank" to "response to ECC" , without xml namespace, in this case I am able to receive the response in ECC, but there is exception called "PARSE_APPLICATION_DATA Error during XML => ABAP
conversion: Response Message; CX_ST_MATCH_ELEMENT in " while receiving response, and when I go and see the logs, it says "System expected element 'MT_Response_MT940_Test'" , as its try to match with the defined structure in PI.
Please experts help me, so my question is how can I avoid the MTs tag in my response structure, I just want to define my response structure in PI same as bank is sending me the data in xml tag, without any MTs tag.
Thanks,
Farhan

Can we delete material for particular storage location using MMSC

Hi,
Can we delete a Material for particular storage location of a plant usign MMSC Transaction?
Thanks in advance.
NDS

Hi, It is not possible to delete the storage location from MMSC once it is saved, Material gets extended for that storage location, U have to delete the material at the storage location level.
Now the only option to delete this assignment is with archiving.
T-code: SARA object MM_MATNR
Refer below link for procedure
[Deletion Storage Location From MMSC |Re: Deletion Storage Locaion From MMSC]
[Cannot delete Sloc in MMSC|Re: Cannot delete Sloc in MMSC]

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

Is there any way to create admin role only for one resource.

Hi all,
I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
Is there any way to create admin role only for one resource?
I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
Please suggest,
thanks

The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

Error while deleting Cash Journal (Numbering group 1001 can be used only for one CoCd and cash journal number)

Hi,
While i am try to delete Cash Journal system throws me error (Message No.:FCJ065: Numbering group 1001 can be used only for one Co. Code and Cash Journal). Kindly provide me solution on that.
Regards,
Tarak

Hi Tarak,
You can use the config nodes in SPRO to set up number ranges for your cash journal documents.
IMG Path> FI Global Settings>Bank Accounting>Business transactions>Cash Journal
Define Number Range Intervals for cash Journal documents
Define Numbering Groups
Define Number Ranges for numbering groups
After defining the number group here, you assign that in "Set up Cash Journal" Check if there is any clash anywhere in your configuration for different cash Journals.
Regards,
Kavita

Calendar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date.

Calenndar - when I want to edit a monthly recurring event but only for one month I am no longer given the box to update only that date month. How do I do this with the new operating system?

Adding to Alan's answer:
One of the problems that comes with these tricks for variable-rate acquisition is being able to match up sample data with the time that it was sampled.
If you weren't using either of E-series board's counters, there is a nifty solution to this! You'll be using 1 of the counters to generate the variable-rate sampling clock. You can then use the 2nd counter to perform a buffered period measurement on the output of the 1st counter. This gives you a hw-timed measurement of every sampling interval. You would need to keep track of a cumulative sum of these periods to generate a hw-accurate timestamp value for each sample.
Note: the very first buffered period measurement is the time from starting the 2nd counter until the first active edge from the 1st. For your app, you should ignore it.
-Kevin P.

Display list of sales orders for one particular customer using BAPI in WD

Friends,
i want to display list of sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer, using Webdynpro.
Please somebody send me related info,blogs,help links , to complete this task, this is very urgent.
Please help
Peter

Find the WD tutorials here...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm">Tutorials</a>

PO from PR only for a particular document type

Dear Gurus
I want purchase orders should be raised with reference to purchase requisitions only. System should allow to make purchase orders with reference to purchase requisitions only for a particular document type only.
I have configured in OMET and assigend this in SU3, now the system is not allowing to create PO for all document types, but I want to restrict this for a particular document type only
Is there any configu change required?
Regards
Muthukumar

Hi
You can make it in MM - purchasing -> purchase orders -> define document types -> check the document type -> click on link purchase requisitions.
And in define screen layout at document level - make PR mandatory for your purchase order document type (field reference).
Thanks
Edited by: Praveen Raghavendra on Jan 12, 2009 2:07 PM

Creation of PO only for one particular storage location

Similar Messages

Maybe you are looking for