Creation of Polite db in Palmtop having Win CE 2.11

We are using a palmtop having Win CE version 2.11. we have the following problems in installing 9i lite.
1) We have tried executing cesetup.exe from mobile\SDK\WinCE\WCE211 directory.
It hangs at \ORACE\createdb polite polite statement from the Cesetup.ini.
2) We tried running msyc utility from the CE device when it was physically connected to the oracle database. The CE device hangs on running msync.exe
3) The wtgpack.exe for the packaging wizard does not work.
If anyone has faced the above problems and has found a solution kindly get back.

Similar Messages

9i lite installation (Creation of Polite db in Palmtop having Win CE 2.11)

We are using a palmtop having Win CE version 2.11. we have the following problems in installing 9i lite.
1) We have tried executing cesetup.exe from mobile\SDK\WinCE\WCE211 directory.
It hangs at \ORACE\createdb polite polite statement from the Cesetup.ini.
2) We tried running msyc utility from the CE device when it was physically connected to the oracle database. The CE device hangs on running msync.exe
3) The wtgpack.exe for the packaging wizard does not work.
If anyone has faced the above problems and has found a solution kindly get back.

We are using a palmtop having Win CE version 2.11. we have the following problems in installing 9i lite.
1) We have tried executing cesetup.exe from mobile\SDK\WinCE\WCE211 directory.
It hangs at \ORACE\createdb polite polite statement from the Cesetup.ini.
2) We tried running msyc utility from the CE device when it was physically connected to the oracle database. The CE device hangs on running msync.exe
3) The wtgpack.exe for the packaging wizard does not work.
If anyone has faced the above problems and has found a solution kindly get back.

I am looking for a way to automate index creation using Adobe Reader Pro without having to use the screen user interface, as the indexing has to be run by a batch process.

I am looking for a way to automate index creation using Adobe Reader Pro without having to use the screen user interface, as the indexing has to be run by a batch process.

[discussion moved to Creating, Editing & Exporting PDFs forum.]

Creation of BPEL with a WSDL having 2 operations with same name

How to create a BPEL 2.0 from WSDL which is having the +2 operation with Same name+ and we are planing to USE PICK activity but the BPEL is giving error while selecting the operation name
can't create input variable.The selected operation does not have an input message.+
WSDL:Operation
     <wsdl:portType name="ABC">
          *<wsdl:operation name="XYZ"*>
               <wsdl:input name="Request1" message="tns:Request"/>
               <wsdl:output name="Response1" message="tns:Response"/>
          </wsdl:operation>
          *<wsdl:operation name="XYZ">*
               <wsdl:input name="Request2" message="tns:Request"/>
               <wsdl:output name="Response2" message="tns:Response"/>
          </wsdl:operation>
     </wsdl:portType>
Can you please provide the alternate solution if the procedure followed by us is wrong
Thanks in Advance

Hi Preetam,
I believe it's not allowed, use different operation name.
A wsdl:portType in a DESCRIPTION MUST have operations with distinct values for their name attributes.
This applies only to the wsdl:operations within a given wsdl:portType. A wsdl:portType may have wsdl:operations with names that are the same as those found in other wsdl:portTypes.
why do you need multiple operation with same message type?
Regards,
Faiz

Auto Creation of PO from SO

Hi
We are working on 11.5.10.2 and our requirement is
1.     User is entering multiple lines (say 20 lines) on Sales Order.
2.     Upon progressing the line, Purchase Order has to be created for these 20 Lines.
3.     Is there any way by which the User can create Purchase Order for the items entered on Sales Order without much User Intervention. The user does not want to go through the process of selecting lines from Purchase Requisition and create Purchase Order through the AUTO Create Document functionality in Oracle. OR can be PO creation From PR be automated without having to manually run the AutoCreate Document request .
We are not using BPA ; is there any solution involving ASL and/or Sourcing Rule which can be used to meet the User requirement.
Thanks

We are not using BPA ; is there any solution involving ASL and/or Sourcing Rule which can be used to meet the User requirement.There certainly is. It involves using either Blanket Purchase Aggreement (which you don't have) or using Quotes.
Once you have created either of those, simply create an ASL entry for the item(s), attach the Quote or BPA to the ASL entry; create a sourcing rule.
Once these setups are done, when a requisition is created and approved, it will get converted into a PO automatically.
And depending upon the value you enter in the "Release method" field on the ASL screen (and your PO workflow attributes), the PO will be created in incomplete status or it can be automatically submitted for approval.
Hope this answers your question,
Sandeep Gandhi
Independent Techno-functional consultant

A problem with Win 7 Pro, Outlook Web Access based on Exchange Server 2003, and two different domains

Dear Microsoft Support,
As mentioned in the title,
I have two domains. One is Domain A at HQ. The other one is Domain A at branch office. A laptop having Win 7 Pro OS is a client of Domain A. The Domain A has Exchange Server 2003. Users of Domain B get connected to Exchange Server for email services. In
all clients of the Domain B, IP address of the email server added in C:\Windows\System 32\drivers\etc\host file.
Whereas in the clients of Domain A it was not done, because all the servers including the email server belong to the Domain A.
Now, a user with Domain A's client (it is a laptop) came to Branch office and wanted to access the Outlook (using Outlook Web Access). since there is no IP address added in the Host file of the laptop, connectivity to email is not possible. When I try to
add the IP address, I was not able to do so due to Domain A's security reasons.
So, let me know, is there a way out to add the IP address in the host file of the Domain A's client.
Thanks in advance.
Ravi Sekhar Modukuru

I would suggest adding the mailserver address in Domain B's DNS. Would that be possible?
I agree. The correct solution in this case (since it appears you already have a two-way Domain Trust in place) is to properly configure DNS in Domain 'B' to be a secondary of Domain 'A' and completely eliminate the need to maintain the HOSTS file.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

EMOD error when trying to upload images to hosting library with WIN 7

Dear Gurus,
using WIN 7 and IE8 i am facing the problem that i receive the error message: "An internal error occured. Please contact your site administrator for assistance."
I have tried multiple settings also setting trusted site: *.crmondemand.com
It works but not having WIN 7 machine.
Oracle statement is that they do not support WIN7 with Email Marketing On Demand. So no help from thereside. Do you have any suggestions for me how i could upload images to EMOD having WIN7 machine. I have already tried with IE, Firefox and Chrome. Every time the same error message.
Thanks for any hint!
Regards Juergen

IE8 isn't certified for EMOD yet....you need to use IE7 to upload the images. I haven't seen anything from Oracle about changes in the new releases.
BOB - Do you know when the next release of EMOD is? I think thats 1.5?
cheers
Alex

Problem using Win Mobile 2005

Hello,
Our customer is using 2 different devices one is having Win Mobile 2006 as the OS and the other is having Win Mobile 2005 as the OS. The SAP screen are perfectly viewable in the device having Win Mobile 2006 OS. The the problem faced in the other device (with Win Mobile 2005) is that the webpage is a blank blue screen.
Thanks in advance.
Regards,
Deepak

Hi,
I'm replying assuming that you are using SAP NETWEAVER MOBILE.
Refer to note 1057759 for the delivered Drivers for Peripherals and devices supported in SAP DOE. This lists all the supported barcode scanners for SAP Netweaver Mobile. Those derivers are certified after testing to work only with that device and OS configuration.
For 7.0, refer Note 761833 for supported drivers and devices.
Regards,
Suma

DSCP (Differentiated Services Code Point) value always set to '0' for outgoing packet on win 7

DSCP (Differentiated Services Code Point)
value always set to ‘0’ for outgoing packet on win 7
I have setup – Controller (Win 7) and Responder (Win XP)
In controller I setup DSCP value to something – ‘50’ (in hex 0x32) and perform RTP call
Then I sniff packets using ‘Wireshark’ where I found DSCP value from Controller to Responder not able to set but which is able to set in packet from Responder to Controller.
Controller to Responder
Responder to Controller
When I run same application under same network, where Controller and Responder are having Win XP, then DSCP value appear in layer 3 protocol.
When I googled then learned I need to do some registry changes mentioned in below links -
http://technet.microsoft.com/en-us/library/cc758910(WS.10).aspx
http://support.microsoft.com/kb/2733528/en-us
But this solution did not help to resolve my problem.
Later I did followed changed in Local Group Policy Editor but which was also fruitless.
I do not want to set some fix DSCP value for all outgoing traffic, as my application has provision to take an input for DSCP value from user.
http://technet.microsoft.com/en-us/library/cc771283.aspx

Hi,
I'll involved another engineer who had more knowledge with your problem. Thanks for your understanding.
Roger Lu
TechNet Community Support

Unable to format hp v165w flash drive in Win 7

I am having Win 7 and v165w flash drive. I am unable to format it . I also tried hp formatting tool. But no use.

Hi,
I can't find its specs but please check, it may have a write protect switch.
Hope this helps.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

OEM Managment Server

Hi all,
First, a little background of why I ended up with this problem. I Installed Oracle91 on my laptop with Win 2k as my OS. That worked well and I started DB A with no problems. Then, I installed OEM on the same machine. When I was asked about a new repository I said yes and the installation created DB B. I linked the managment server to DB B. I then removed DB B and now I can not seem to link the management server to DB A.
When I try to log in I enter log/pass and (my_computer_name). I try to log in and I get the following error: "VTK-1000 unable to connect..."
How can I set up the management server so that it points to the OEM repository in DB A?
Hope this makes some sense.
Thanks,
Ornulf

Hi all,
First, a little background of why I ended up with this problem. I Installed Oracle91 on my laptop with Win 2k as my OS. That worked well and I started DB A with no problems. Then, I installed OEM on the same machine. When I was asked about a new repository I said yes and the installation created DB B. I linked the managment server to DB B. I then removed DB B and now I can not seem to link the management server to DB A.
When I try to log in I enter log/pass and (my_computer_name). I try to log in and I get the following error: "VTK-1000 unable to connect..."
How can I set up the management server so that it points to the OEM repository in DB A?
Hope this makes some sense.
Thanks,
Ornulf I think what might have happened is that, when you created the repository, DB A should have been specified for creation of the repository. By having the repository stored in a new DB, DB B, and then deleting DB B, there is no longer a repository for connecting to.
Rerun the EMS Configuration Assistant again and specify the repository should be created in DB A. Start the service and, then, attemp to log in.
Hope this gets you going.

Credit check at sales order level?

Dear experts
I want to set credit check at sale order level with following conditions
consider open deliveries for credit exposure
consider billing documents for creadit exposure
do not consider any open orders
Also if oldest items are open for more than 7days then block the sale order creation
e.g suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-. In this case system should block the new sale order created of value more than Rs.50000/-
plz suggest the configuration steps
regards
kailash

dear friend
For i am already having the same setting but still my scenario is not working. i will explain my scenario again
suppose customer is having credit limit Rs.100000/- and open deliveries against this customer is having the value Rs.50000/- i.e. credit exposure is Rs.50000/-.
In this case system should block the new sale order created of value more than Rs.50000/-
But with the said settings purpose is not getting solved.
my settings are;
In OVA8 ;
Update: 000015
Static check: TICK
Status: TICK
open deliveries: TICK
Plz suggest
kailash

FRM-40734: internal error: pl/sql error occurred

I am getting this error [FRM-40734: internal error: pl/sql error occurred] while running a form (FMX) developed in Forms 6i. The form is running on machines having Win XP, Win 2k, and Win 98. But not running on the same operating system of the other machines.
* I have completely uninstalled Developer 2000 both Forms 6i and Report 6i, and installed again.
* The "Start in" Path and "Bin" path for the application is also correct.
If anybody have idea kindly reply me quickly.
[email protected]

just some remote ideas :
any PLLs involved ?
any changes done on PLLs ?

Error creating repository in oracle 9i (9.2.0.1) database

Hi I am trying to migrate a SQL Server 2000 database to oracle 9i using SQL Developer 1.5.5 and i am getting an error during the repository creation phase. I keep on having the same error:
SQL Error on Script Execution
Try deleting the repository before creating repository.
And the following when i click on ok:
The repository installation has failed. Please check the user you are registering and make sure that objects of the same name do not already exist.
I have checked the database and both my users and temp tablespaces have more than enough space - so it is definitely not a space issue. Here are the roles and privileges that i give to the migrations user upon its creation (same from the docs):
CREATE USER migrations_user IDENTIFIED BY migrations_user DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
GRANT CONNECT, RESOURCE, CREATE VIEW, CREATE PUBLIC SYNONYM TO migrations_user WITH ADMIN OPTION;
GRANT ALTER ANY ROLE, ALTER ANY SEQUENCE, ALTER ANY TABLE, ALTER TABLESPACE,
ALTER ANY TRIGGER, COMMENT ANY TABLE, CREATE ANY SEQUENCE, CREATE ANY TABLE,
CREATE ANY TRIGGER, CREATE ROLE, CREATE TABLESPACE, CREATE USER, DROP ANY SEQUENCE,
DROP ANY TABLE, DROP ANY TRIGGER, DROP TABLESPACE, DROP USER, DROP ANY ROLE,
GRANT ANY ROLE, INSERT ANY TABLE, SELECT ANY TABLE, UPDATE ANY TABLE TO migrations_user;
Has anybody encountered this problem before and resolved it?
Any ideas / suggestions would be greatly appreciated.
I also tried creating the repository in a 10g database and did the migration successfully to the 9i database. However, I found out later that the created sqlserver_utilities package was invalid because it made reference to DBMS_DB_VERSION package which was non existent in the 9i database.
Thanks
Edited by: nyanga on Oct 2, 2009 2:20 PM
Edited by: nyanga on Oct 2, 2009 2:22 PM

Hi Nyanga,
The migration tools can be used to migrate to Oracle 9i.
But we try and keep the conversion compatible with Oracle XE / Oracle 10g and up.
So you may have issues migrating to Oracle 9i like you said, with he sqlserver_utilities package and using 10g syntax.
Creating the repository on Oracle 9i is not supported.
But even if you did succeed , it would not change how the conversion was done. You would still end up with an identical sqlserver_utilities package which was generated using the migration repository on an Oracle 10g database. sqlserver_utilities package definition itself is fixed within a file so regardless of the repository used the same one will be generated.
Oracle XE can be used of course as the repository and its free to download and use.
Regards,
Dermot.

Updating transaction MD61 using information from inbound IDOC

Is there any standard IDOC type for Planned Independent Requirement(having fields of table PBED and PBIM in its segment)?If such an IDOC type doesnt exist then i have to go for custom idoc type creation
I have an inbound IDOC having 4 fields in its segment
1.SAP Material number
2.Plant
3.Plant Quantity
4.Requirement date
Now i have to use this information in IDOC to update transaction MD61(create a planned order).
constraints:
in MD61 screen1
SCREEN 1
Material radio button is defaulted to on. This must also be set in the interface. Material number will be valued from the input file.
Plant will be valued from the input file.
Version number defaults to 00, so that value should also be used for the interface.
Planning Horizon From and To dates will be the same date and valued from the input file.
Planning Period should be set to D for Day
SCREEN 2
Material number should default from SCREEN 1 input. The interface should also do this.
MRP Area will default from the Plant on SCREEN 1 input. The interface should also do this.
Version will default from the 00 on SCREEN1. If needed on interface, also default to 00.
Version Active checkbox will be checked by default.
Base Unit of Measure will default from material master.
Only a single date column will appear which should be the date input on SCREEN 1. Value this column with the quantity from the input file.
Input fields are highlighted in screenshots below.
After input is complete, use the SAVE icon to store the data.
Kindly tell me the approach to prepare this interface?

Done,used BAPI_REQUIREMENTS_CREATE TO DO SO

Creation of Polite db in Palmtop having Win CE 2.11

Similar Messages

Maybe you are looking for