Creation of PR with MD01

Hi,
Somebody knows if exists some parameter that allows the grouping creation of PR with transaction MD01? In my customer, the MD01 creates one PR for each material
Thank you!

Dear !!!!!
I think the Possible Entry u can Make Individual/ Collective requirement = 2 Collective in MRP4
Also if you want all requirement to get add monthly or by weekly then it can be get instead through lot size
As in yours cases you want monthly then make MB in MRP1 view .Keep lot size MB.
This will create only one PR for the entire month.
Revert Back!!!!!
With Regards
Pushpalas
Edited by: pushpalas on Oct 1, 2011 2:29 PM
Edited by: pushpalas on Oct 1, 2011 2:36 PM

Similar Messages

  • Creation  of PO with reference only

    Dear Fiends,
    Can anyone explain,how can we make creation of PO with Reference to PR mandatory for Certain documents types of PO.
    Regards
    SAPMM

    Hi,
    Copy the field selection key NBF(Define screen lay out at document level in spro>Matmgmt>Purchasing>Purch.order>)
    In new field selection key go to reference data item and make mandatory to PR
    Define some PO document type and link this New field selection key at "define document types"
    Regards,
    Sattuj

  • Creation of PO with referance to PR

    Hi,
    I have one requirement,
    Creation of PO with referance PR,but the condition is
    1.It should take the qty from PR
    2.Price should from PIR
    3.This requirement is specific to one Document type ,PR has been created fro MRP and then need to convert the PR to PO.
    I tried with Functional authorization,it is working fine but it is having effect on other document types also.
    Can you please suggest me is there any User Exit available for this.
    Thanks In Advance.
    Jagadish

    Hi
    First configure Release Statergy such that All PR's generated from MRP should be converted into PO  with out Release Procedure  and Other manually generated PRs should be converted in to PO after Release Procedure only......( For that you have to create Doc.type as a one charecter....Table: CEBAN...Field: BSART  and MRP generated PRs should have one document type and Other manually created PRs should have diff. Doc. type)
    Then follow the below steps..
    1)In Material Master,Purchasing view....you maintain Purchasing Group and Check Auto PO Check Box.
    2)In Vendor Master,Purchasing Date view Maintain Purchasing group and check Auto PO Check Box..
    3)Maintain Proper  PIR with Valid Conditions
    Then after creation of PR from MRP...assign source for the PRs IN ME57..
    If you configure release Statergy  such that PRs generated thro MRP need not under go Release procedure ....then go to T.Code: ME59  and convert all PRs in to PO...
    In this way without having any user exit you can solve your problem...We are doing in this way only..
    Reward if useful
    Regards
    S.Baskaran

  • Inspection lot creation during GR with respect to Purchase Order

    Dear Experts,
    Here is my Question
    Inspection lot creation during GR with respect to Purchase Order
    Inspection type 01 set in the material master
    inspection lot will be created during GR for a Purchase order
    from my understanding for every GR a inspection lot will be created
    No batch Management
    but the requirement is irrespective to GR qty and number of times of GR
    we need inspection only one inspection lot
    For Instance
    There is a PO for 1000 kg no batch management
    now i do GR for 100 kg for 10 times with different dates
    now i need to have only one inspection lot
    not 10 inspection lot for each 100 kg
    can any one suggest a solution, please advise my understanding is correct
    Many thanks
    Raj

    Dear Raju,
    There is a solution for that .The setting can be done two ways, either in the material master or in the configuration
    1) Material Master
    MM02> QM View> Inspection Setup> 01> Control Insplot> 'X' An inspection lot for each purchase order item/order item 0r  An inspection lot for each material document and material
    a) 'X' An inspection lot for each purchase order item/order item
    This Means
    This setting is limited for use with the inspection lot origins 01 and 04.
    An inspection lot is only created during the first goods receipt for each PO item or production order.
    b) '1' An inspection lot for each material document and material
    If you set this indicator, the system creates only one inspection lot for a material document (in a goods receipt transaction) for each material. This setting is useful, if several purchase orders or partial deliveries are processed for the same material in a goods receipt transaction.
    2) You can do this default in the config
    SPRO > Quality Management >  Quality Inspection > Inspection lot creation >  Define Default values for inspection type > 01> Control Insp lot
    Hope this helps
    Regards
    gajesh

  • Creation of Applicant with Refrence Emplyee

    Dear Experts,
    I am new to HR module, there is a requiremnt where in I have written a report to create applicants using the standard BAPI
    BAPI_APPLICANT_CREATE by giving the required parameters.But for creation of Applicats with existing employee refrence I was not able to find a parameter where in we can pass the reference employee details to the BAPI. If the BAPi which I have used is not the one by which I will be able to create Applicats with refrence employee details kindly suggest another BAPI or a Function module.
    Thanks & Regards,
    Murthy.

    u can also use HR_MAINTAIN_MASTERDATA Tclass u can maintain as B.

  • Creation of IBASE with the XIF adapter

    Hello,
    I am trying to create IBASES using the XIF adapter (LSMW). The actual creation of the IBASE is no problem, but creating an IBASE with a partner + address connection seems not to work. In HELP.SAP there are examples of IBASE craetion with components but not with partner relationships.
    What do I need to fill in the E102CRMXIF_IBASE_PARTNER structure, does anyone have any documentation on this subject?
    Thanks advance!
    Arjan.

    Hi Arjan,
    Do you have any documentation of this process 'Creation of IBASE with the XIF adapter'. Please post it.
    Thanks in advance.
    Sameer Ahamad

  • Why does a new desktop creation unexpectedly initiate with a background differing from the originating desktop? How can I control or eliminate this behavior?

    Why does a new desktop creation unexpectedly initiate with a background differing from the originating desktop? How can I control or eliminate this behavior?

    CT, I suspect that I either mistated the question or don't understand how to set the default back ground.  In any case, with the background that I have set in system settings, and this is the background to which my sessions consistantly boot, new desktops come up for the second or up to the third background with this initially set background. Then in the third or fourth desktop creation (I seldom go beyond four), the background for the new desktop, is one that I was using one or two months ago...

  • Restricting Sales Order Creation for Customers with specific AccountGroup

    Hi
    We have 2 Accont Groups for Customers namely Actual & Prospective.
    We wish to allow Enquiry / Quotation and Order creation for customers with Account Group ACTUAL and wish to allow only Enquiry and Quotation creation for customers with Account Group as Prospective.Is there anyway i can apply Sales Order creation block on an ACCOUNT GROUP on whole and not on Individual customers...
    Regards
    Sanjeev Bagaria

    Hello
    I did this through Listing Inclusion / Exclusion.
    (1) We created a new Customer Group 99 for Prospective Customer
    (2) We then created a new Condition table xxx with Customer Group & Material Type(as footer)
    (3) We then created this new Access Sequence Customer Group / Material Type to Exclusion Procedure B00001
    (4) We then assign the Exclusion Type B00001 to Sales Documents ZDOM & ZEOR our Order Sales Documetn Types
    (5) And finally we created a record for Exclusion with 99 Customer Group and Material Type as FERT..
    This now restricts creation of Sales Orders for all my Prospective Customers provided Customer Group is maintained in Customer Master. We are now also able to make Enquiry / Quotation and Sample Sales Order for Prospective Customers sicne we have Different Sales Document Types for all these and have assigned Exclusion only to normal Sales Order Document Type.
    Thanks a lot for all the suggestions provided.
    Regards
    Sanjeev

  • Automatic PO creation from PR with no master data

    Dear gurus,
    Is it possible to run ME59- Auto PO creation from approved PR with no master data/source assigned/PIR? Assuming user create adhoc PR.
    Is it possible to run this process successfully if i didn't meet on the criteria below? let say no.1 is not checked?
    1.Material Master purchasing view, check automatic PO check box.
    2. Vendor Master purchasing view, check automatic PO check box.
    3. Maintain Source list for Vendor and Material (transaction ME01) and also see validity period.
    4. Maintain Purchase Info Record (transaction ME11), check info record category (must be standard or pipeline or subcontracting)
    5. Create a Purchase Requisition ( transaction ME51N), during creation select check box of Source Determination.
    6. Use transaction ME59 and execute for purchase requisition for vendor, you will be able to create automatic PO.
    Thanks in advance.

    Hi,
    yes all point should be checked
    check following link
    [http://www.sap-img.com/materials/steps-to-create-auto-po.htm]
    Regards
    Kailas Ugale

  • Service order creation using bapi with repair order number

    Hi experts,
    Pls suggest me a BAPI to create a service order for those repair orders where a PGR has been done(for return delivery type : LR).
    The plant should be 0260 with storage location wh01 and item category ZRRE
    Creation of a service order with repair order type SM03 is not allowed in iw31.
    thanks and regards,
    Vijayb.

    Hi prakash,
    Thank u for the BAPI
    But an error is being displayed saying that the REFURBISHMENT ORDERS CANNOT BE PROCESSED USING BAPI.
    ERROR DURING PROCESSING OF BAPI METHODS.
    This is while u pass the order type as either ZM03 or SM01or SM02 or SM03.
    pls help me on that.
    thanks and regards,
    Vijayb.

  • Prevent creation of PO with errors.

    Hello SAPients,
    I'm an ABAP developer, I don't know much about MM and or PO configuration, but I have this requirement that maybe can be solved with customizing instead of programming.
    "While creating a PO if there are error messages, the system still creates a PO. We want to restrict the creation of PO if there are any error messages.
    ME23N -> Click on  button to display the messages."
    Is that possible? How?
    Thank you in advance for your kind help.

    Hi Sudhansu,
    Thanks for your reply, this is the list of errors I'm getting in that specific PO I reviewing:
    DocHeader
    Message no. BL001
    PO header data still faulty
    Message no. MEPO002
    Enter a vendor
    Message no. 06049
    No Authorization in Document Type NB
    Message no. ZMM01332
    Item 10
    Message no. BL001
    Enter Plant
    Message no. ME083
    Item 10 Sched.line 1
    Message no. BL001
    Please enter a delivery date
    Message no. MEPO042
    I also reviewed the customizing path you told me and I couldn't find any of those errors in the list. Should those messages be in that list?
    Thanks!

  • Creation of PO with account assignment:Q

    Hi,
    During creation of purchase order with account assignment category: Q, consumption GL account is getting triggered instead of Project Stock GL Account. What could be the reason for this?
    Regards,
    Srinivas.

    Check what account modification key is assigned to account assignment category 'Q'.
    T-code: OLME
    Purchasing --> Account Assignment --> Maintain Account Assignment Category
    Select the Account Assignment Category 'Q' and click on the details button.
    Check the Consumption Posting (P) , Account Modification key (VBR)  and the Special Stock field (Q).
    Depending upon the Account Modification Key, System picks the G/L from the OBYC (GBB) Setting (Tcode - OBYC).
    Regards,
    S Anand

  • Creation of PO with tow default pricing conditions

    hello,
    can you please indicate to me how I can have by default two conditions RA00 and HB01 with a value 0 during the creation of a PO? how can make this customizing in the pricing procedure?
    thank in advance.
    Said

    Hi,
    Every condition maintain in Pricing procedure are shows Zero value at Purchase Order if your not maintain condition records for some rate.
    and also it not possible to maintain a condition records for Zero rate.
    so for your req, just maintain the condition at pricing procedure by selecting print indicator.
    regards
    Sanjay L

  • Creation of TO with 101 Movement type

    Hi
    My requirement is:
    To create a Transfer Order(TO) with Movement Type 101 and when TO is created, checkbox "Immediate TO" should get ticked.
    For TO creation I am using : L_TO_CREATE_MULTIPLE
    But Checkbox "Immediate TO" does not gets checked for the PO.
    Please suggest how to proceed.
    Many thanks in advance.

    Hi Andrei
    Thanks for your reply. What you have mentioned above is correct.
    Immed. TO(Checkbox under WM tab in Material Document)
    Automatic TO Creation Immediately After TR Generation
    Indicator determining that automatic transfer order generation is active.
    Automatic transfer order generation can be initiated both during the creation of the IM document as well as during material staging for production orders (PP interface).
    After the IM document has been created, a transfer order for a transfer requirement or for a posting change notice is created, provided the following requirements are met:
    Automatic transfer order generation is active (depending upon the movement type for all items of the IM document for which a transfer requirement or a posting change notice is to be created.
    Within the entire document, the postings are executed in one warehouse number only.
    If the current document is to created for each function module, for example, from the usage decision of QM, the automatic transfer order generation function must not be switched off.  This can be the case if on the basis of the constellation in the inspection lot automatic TO generation is not appropriate (see also the documentation on the interface WM <-> QM).
    My requirement is not to use Customization i.e. I donot want to check 'Automatic TO' in customization.
    Instead I am using FM: L_TO_CREATE_MULTIPLE  in a program for TO creation.
    And when TO is created with Movement type '101' from the program, it should also check the checkbox 'Immed. TO'
    Just wanted to confirm if this is possible.
    Thanks & Regards,
    Shashank

  • Creation & saving PO with Automatically spool

    Dear Expert,
    I wanted to generate PO out put spool upon creation & afterward saving of PO.
    I have tried with all means but not succeeded. Output type ( NACE) with Dispatch time 4 instead of 3.
    Kindly let me know the exact changes to be incorporated in PO output type in NACE
    Rgds,
    Manoj

    Hi
    See SAP Note 201830 - Calculation of the net price of an item. Although it's for SD, I think that it could help you to understand how to do in MM (so, change V/06 by M/06, ie: pricing condition, V/08 by M/08 ie: pricing procedure).
    I hope this helps you
    Regards
    Eduardo

Maybe you are looking for