Creation of Product :technical abbreviation of the software unit name

Hi All,
   I am trying to create a new SWCV in SLD and after entering the initial product name,version and vendor , Iam asked to
"Enter the technical abbreviation of the software unit name"
I further see that this gets listed as "Software unit".
Whats the importance of this field and also what would be the typical values ?
Thanks in advance!
vittal

Thanks Prateek,
   Did you mean by "Technical abbreviation " same as the SWC or the SW Product ? Cos SW Product is collection of SWC ?
I have given Technical abbreviation as SWC itelf.. BUt When I see the various software unit in the ProductA ,  I find 2 entries even though I have created only one.
1.ProductA : (default )
2.ProductA: SWC (this is one i have created )
Kindly clarify?
regards
Vittal
Edited by: Vittal Navale on Nov 4, 2008 11:10 AM

Similar Messages

  • How do I go about getting the product serial number to register my product as well as install my product.  I bought it with a product box.  On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid

    How do I go about getting the product serial number to register my product as well as install my product.  I bought it with a product box.  On the software disc sleeve, there is a series of numbers pasted at the bottom of the sleeves but this is not valid.  When I tried to type this in for registration, it does register as this numbers also contain letters in it.  Apparently the registration boxes accept numbers only.  What do I do with a useless product for which I have paid good money for it?????

    This is the simple solution which was offered to me when I tried to get the serial code on line.
    The box and disc sleeve do not contain a series with 24 numbers which I presume is the product code to install.
    I tried to redeem the registration code by following what they recommended, but inevitably it gets to the page that showed the registration boxes that need 24 serial numbers and I got stuck again.
    This product is so different what my previous experiences of other software products where I just enter the serial number straight from the disc sleeve and then I got registered and go on to use the software.
    I is really frustrating, spending the last two hours trying to get my product going....

  • Fetch the operating unit name based on the country name

    Hi all,
    I want to fetch the operating unit name based on the country name, there is no link between fnd_territories(_tl) and hr_all_organization_unis(_tl) tables.
    Can any one know how to get this thing.
    any help or idea is appreciable.
    Thanks,
    Giri

    Giri,
    I don't think you will find such a link. One country can be used by multiple operating units.
    Hope this helps,
    Sandeep Gandhi

  • Need to get the operating unit name for AP report

    Hi,
    I'm really new to XML/BI publisher. I have to customize a oracle report called Payables Posted Payment Register. The package XLA_JELINES_RPT_PKG ties into this report. Upon reading the package it's pretty confusing. Anyway, there is a parameter called P_SECURITY_ID_INT_1 which is the operating unit. I'm trying to display the operation unit in my report but it only returns the operating unit id and I need the name of the operationg unit. So I'm guessing im going to need to grab it somehow in the XLA_JELINES_RPT_PKG. Is this correct? Any suggestions on the best approach?
    Thank you!! Your help is so much appreciated!

    Hi,
    after time elavualtion use t code PT66,  in this t.code double click on the each month(period) then you can get the internal table like ZES, SALDO, ZKO. again double click on the each internal table, you can get the information through the time types.  Like , now you want the overtime hours, 0903, 0904 with this time types you can get the each employee no. of. overtime hours.
    ZL, ZES, SALDO, TIP entries are internal table , you could not get any results from this table with using se11, se16.
    With PT_BAL00 with this report also we can get the overtime hours with the help of time events.
    Good luck
    Devi

  • APO-MD - Mass Creation of Product Masters in APO.

    I have need to create about 100,000 product masters in APO. The product master general data does exist as it has been CIFed over from R/3. However these need to be mass extended to several customer locations.
    I am looking for any advice on tools/programs that will allow mass creation of Product masters in APO.

    The Functiona Loader did mass create products but the product model assignment did not work even though the model number was mapped in the loader.
    Did I miss something in the process.
    Is there another way to mass assign products and model.

  • CIM - Adding a software unit

    Hello everyone,
    In our company we develop Add-ons. Similar to SAP these Add-ons have some ABAP and some Java/J2EE parts. The later are developed using layered track development in NWDI.
    To complete the software product definition in CIM, we should be able to add the "software unit" to our product definition. With this one can model the logical relationship to the ABAP and to the Java/J2EE part. This similar to the way SAP does. For instance: See definition of SAP WEB AS 6.40
    Does anybody know how to add definitions of software units to the CIM?
    Best regards
    Ron van den Enden

    Hi Pascal
    Sorry for my late response. I actually mean software units. These units a describe by SAP as a logical feature of a software product. An example.
    WEB AS 6.40 has two software units:
    - WEB AS 6.40 ABAP
    - WEB AS 6.40 J2EE
    A software unit is related to several software component. An example:
    The software unit WEB AS 6.40 ABAP:
    - SAP BASIS
    - SAP ABA
    - Kernel
    Best regards
    Ron

  • Can i pass the persistence unit to the Ejb before it inject the entity mana

    Hey,
    The user in my system can create his personal schema, so i need to work with multiple schemas.
    As i understand i need to create at run time persistence unit for each schema.
    The problem is that my DAO i inject the entity manager in the following way:
    @PersistenceContext(persistenceUnit="bla-bla")
    public void setEntityManager(EntityManager em) {
    this.em = em;
    }i need to write the persistence unit name hard coded.
    How can i solve this?
    Thank you

    There's no way to get this kind of dynamic association to a persistence unit for container-managed
    persistence contexts. You'll need to explicitly create an EntityManager using the
    EntityManagerFactory API, where you specify the name of the persistence unit at runtime. Even in
    that case, the persistence unit must already be defined.
    --ken                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How to get the Business Unit

    Hello everyone,
    Am working in Oracle Application R12,
    to make the purchase order I have to made the request,
    In the request window I am selecting the Business Unit(BU) name from the flex field values,
    Is it possible to directly fetch or load the business Unit name based on the Responsibility name,
    For example If my Responsibility name is xxxx then correponding Business Unit code should be loaded,
    I should not select it by clicking Flex field.
    Thank you.

    Gurujothi wrote:
    Hi Mahendra,
    Here am trying to create the Purchase order,but before creating a Po I have to create the Requisition for the Po then it should be approved then only i can create the Po for the approved item,
    Here in creating a Request window only I need that Business unit based on the Responsibility.
    Thank you.Business unit you mean here is the operating unit..correct
    It will be set by profile options for each resp's..MO Operating Unit
    so that whatever the requisition you create will be under this..
    If you are R12 we can have MOAC enabled so that without changing resp..you can create req's in different OU's
    HTH
    Mahendra

  • HT1349 I don't have an Apple product. I accidentally signed up for iCloud because I thought I could use it with my iTunes on my PC. Now it won't go away. I have deleted the software but every time I open iTunes it demands I reopen my iCloud session. Help.

    I want to get rid of iCloud. I do not currently have an Apple product but thought I could use it with iTunes and my PC. I have deleted the software. I told iTunes to take it off my account, but every time I open iTunes there it is again, asking me to log into iCloud. I can't get Apple support because I don't have an Apple product. I don't know how to get rid of this!

    This is for a Mac, but may be similar for a PC.
    How-to: Safely delete an iCloud account from your Mac or iOS device
    http://9to5mac.com/2013/07/13/how-to-safely-delete-an-icloud-account-from-your-m ac-or-ios-device/
     Cheers, Tom

  • If I don't have a previous version of an adobe product, but the only ones available of older editions are updates, can I use the update version to install the software?

    Dear Adobe,
    I've got older systems, ones that can't handle CS6, and a budget too low to purchase a new system and your software even with a student discount. Is there any way to use an update version? I wish that all of the "Creative Suite[s] products [would] continue to be available for sale via ESD on Adobe.com"(Adobe)*, or at least most of them. I understand the need to update, and that the industry is difficult with competitors, but I wish that all of your software versions were aimed towards 32 bit systems too. There are plenty that can keep up with the operating System updates, and I only wish that you would have kept at least CS5 on support instead of shutting it down. So, if you won't accept support of older products, can you help me with this? Or is this beyond any of the software contracts that is in the company's power? I appreciate any assistance in this matter.
    *CS6 FAQ

    You can only buy CS6 and CC. Otherwise you will have to find someone willing to part with his license and run a license transfer. Though, quite frankly this doesn't really make sense. You can buy cheap laptops withe a suitable 64bit version of Windows 7/ 8 for 300 Euros. The money saved could easily be invested in a CC student plan rather than possibly trying to find an overpriced older version with the risk of getting scammed... Otherwise you can use the trials of course, but that's about it.
    Mylenium

  • I purchased microsoft office 2011. I have downloaded and installed the software but at no time was I prompted to enter my product key. As a result I am unable to use the software. Please help me activate the software. Thanks

    I purchased downloaded and installed microsoft office 2011 onto my iMac. At no time was I prompted to enter the product key so I am unable to activate the software. Can anyone tell me what to do in order to activate the software?

    Welcome to Apple Support Communities
    Where did you download Office for Mac? If you downloaded it from Microsoft, read > http://support.microsoft.com/kb/2391941/en-us

  • Install Windows 2008 R2 KMS Key Error "0xC004F050 The software licensing service reported that the product key is invalid"

    My KMS server is running on Windows Server 2012 R2 and activated by Server 2012 KMS Key. 
    I would like to use the KMS server to activate many Windows 2008 R2 server, however, Error message "0xC004F050 The software licensing service reported that the product key is invalid" is appear when adding Windows Server 2008R2 KMS Key. The Windows
    Server 2008 R2 KMS key is confirmed and validated by Microsoft Telephone service.
    Command used:
    slmgr /ipk <Windows Server 2008 R2 KMS Key>
    Anyone can help? thanks.  

    Hi Samson,
    Based on my research, we need to choose associated KMS key based on the highest product being deployed in the product grouping hierarchy.
    To choose the right Volume License key, please refer to this article:
    How to Choose the Right Volume License Key for Windows
    Please type the cmd "slmgr /dlv" on KMS Host and check if it has been activated successfully.
    After configure KMS host, By default these KMS client computers will query DNS and locate your KMS host and activate 
    KMS Client Setup Keys 
    To reset computers to be KMS clients type the following at elevated command prompt: 
    Slmgr.vbs /ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx 
    Where xxxxx-xxxxx-xxxxx-xxxxx-xxxxx is the generic VL key from the following link. 
    https://technet.microsoft.com/en-us/library/jj612867.aspx
    For more detailed information to activate KMS client, please refer to the article below:
    Installing KMS Hosts
    Configuring KMS Clients
    If there is anything else regarding this issue, please feel free to post back.
    Best Regards,
    Anna Wang
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How do I locate the Software Setup screen within Photoshop Elements trial product?

    How do I get to the Software Setup screen within Photoshop Elements 11 trial product (to convert from trial to paid-up)?

    If you are on trial application, so whenever you launch Photoshop Elements Editor, it will give you the option to serialize your product.

  • Which is the software needed for an installation on a production server

    Hi,
    which is the software needed for an installation on a production server (windows 2008) of Forms/Reports 11g ?
    I mean the old 10g stand alone forms and report service but un 11g release ..
    Regards

    For application deployments (production), you will need the following software. The same is true for a design-time environment.
    1. Weblogic Server 10.3.2
    2. Fusion Middleware 11.1.1.2
    See my update in the following:
    Re: Some FORMS quesion...
    All products are contained within the Fusion Middleware (Forms, Reports, Portal, Discoverer) distribution. This includes Builders, Runtime components, HTTP Server, Web Cache, etc. During the installation process, you choose which you want to install.

  • When I try an update I-tunes the software tells me the older version of Apple Software Update cannot be removed. Contact your technical support group. Help!!!

    When I try an update I-tunes the software tells me the older version of Apple Software Update cannot be removed. Contact your technical support group. Help!!!

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Maybe you are looking for

  • Impossible to use "Connect to Data/Service" with BlazeDS

    Hi everybody, I'm work on FB4 since 3 weeks, but I have big problem to use "Connect to Data/Service" with BlazeDS.  each time I try to use it, it's the same question " You must define a BlazeDS server" and when I define the BlazeDS server and .war, I

  • HELP!....cant copy songs on to phone

    hi i have songs on my pc which play properly...i connect my phone via USB to copy the songs on my phone...on the pc it shows that the songs have copied correctly under my music folder on phone....but when i disconnect my phone from pc & try to play s

  • How to format 250Gb IDE disk

    I'm using Sun Ultra 5/10. I'm trying to add new 250 Gb IDE hard disk. But all I can do is format 127Gb. So, I realized there is LBA limitation. Is it possible to break this threshold?

  • Trouble with passing parameters to a dynamic theme

    Hello experts, I have been wrestling with this for days now, and can't seem to understand what is going on here. I don't think it's difficult to figure out and I'm sure I'm not the only one who has come across this, I just feel like I am missing some

  • Why use smart objects

    Been away from photoshop since early days of CS6. At that time I did not use smart objects. Now I see many tutorials using smart objects and smart filters. Is the use of smart objects in the mainstream now? Reasons for and against using them.