Creation of R/3 source system

hi
i have problem with creation of R/3 source system in BI 7.0 like
1.creation of logical system for R/3 client
2.creation of logical system for BI client
3.naming of background users
4.creation of R/3 source system in BI.
if any body have the solution pls post it.
regards
venkat

Hi,
Taka e look also these.
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Regards.

Similar Messages

Info required while creating source system

Hi Experts!!
We have to create a source system in BW for R3, menas to fetch daa from R3 to BW.
When we are going to create source ssytem it asks for
1.available destination
2. create new destination
3. Background user in source system
4 password
5.Background user in BW
6. password.
Could you please pass on some information regarding , what is this and moreover how to create <u>Background users in both system</u>.
Please tell procedures with steps...
Regards
Supam....

Hi Supam,
There are two ways to create a source system for R/3
1.Automatic
2.Manually
Before going to manuall method you are suppose to create RFC Destination for R/3 system in the BW System.
Now In the manual creation give the RFC,Source system name and Logical system name details.
Regards,
SPS

Error in creation of source system

Hi Experts,
We are facing a problem while creation of source system. We are getting an error "You have no authorization for basic types (activity 03)" Kindly help me to resolve this issue.
Regards,
Jitendra

Hi there,
if you get the error again, please go tcode su53 directly and see for which object the authorization is missing. I understand you have SAP_ALL access but for any authorization issue we normally go to SU53 tcode and verfiy.
So once you get the object name then go to SU01 and open your id. Go to authorization tab and find for that object and see if '03' activity is assigned to you or not.
If this step is absolutely fine then we can think of alternative solution.
Regards,
Anup

Message "Creation of DataSources for SAP source system is not permitted"

Hi,
I am in DW Workbench: Modeling and I need to copy a DataSource.
It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
What can I do?
Thks

Hii.
You can not copy the standard datasource to any other source system it will not allow you to do that.
But if you want to copy you can copy it to PC FILE source system.
It will allow you to copy there.
Right click in Datasource->Copy-> Give Target datasource name -
> intarget Source system tab -
>Give Source system for File.
Thanks
Mayank
Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

Creation of System Alias between Portal and E Sourcing System

Hi Team,
I would like to create a System Alias between SAP Portal 7.4 and E Sourcing System 10.0. I would like to know during the creation of System Object which template i need to take (is it http System or R/3 System using Load Balancing).
If it is a HTTP System, I am getting ""Could not find Connector Factory value: null"".
Could you please help me in knowing what could be the issue.
Pls. Note: E Sourcing is a Java based SAP System.

Hi Sankar,
Please go through the below SAP Note and see if that helps.
711769 - SSO between SAP Java Software Products
BR,
Anurag

Source system creation

hi experts,
this is the first time i am creating source system
i am have requirement to load data one bw system to another bi system,
so, to do that i defined and created logical system in bw for bi system and
i created same for bw in bi system also and everything is ok.
i guess my next step is to create source system(my self) for bw in bi .
when i am trying to create it is showing that it is already exists.and here what type of source system i need to choose. i am not founding any my self bw data mart
status symbol under source system creation node and what type of the source system i need to choose and whether it is manually or automatically.if i choose automatically it is asking create new destination ,create back ground user and connection of source system to bw (it is asking to fill all fields),for manual system creation only logical system and rfc destination. is it required to creat source system or not because my self bw data mart symbol is present in bw system and bi system also.please correct me if anything wrong
thanks
venu

hi chandra shekhar &chitrat,
thanks for your quick reply,when i choose sap business information symbol
it is asking to fill all the entries like crate new destination under this i provided
target computer in this i provided ip address of bi system( i am creating in bw system),system id & system number,and back groung user in source system and
password ,connection to the source system ,target system for back ground user
and connection to the source system what i need to provide
thanks
venu

Source System creation in BI 7.0 for SQL Server using DB Connect

Hi
My requirement is to extract data from SQL Server 2005 to BI 7.0 using DB Connect.
I need to create a SOURCE SYSTEM for that purpose,As i am new to BW i don't know how to start to create a SOURCE SYSTEM.
What are the parameters i require either from Basis team to install or for DB team User ID in SQL (What type of user).
Questions:
1) create a db user with authorization to read this views.......as i created views on tables...do i need authorisation to read table or views
"On BW Server side (If BW server isn't based on SQL Server):
(1) Install SQL Server client and test connection to SQL Server DB.
(2) Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel)"
How can i know on which server our BW System is Based and HOW Install SQL Server client and test connection to SQL Server DB and
Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel
and
how to create Source System to SQL Server on BW
Please update me in details i this is my first Source System Creation in BW
Thanks in advance

go through the link this may be helpful http://msdn.microsoft.com/en-us/library/dd299430.aspx

Error while source system creation/Source system transport

Hi,
     In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
     Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
     I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
     Message no. RSAR502
Diagnosis
     With Remote Function Call to system GWPCLNT900 error connection closed
     (no data) ccurred.
Procedure
     Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
Krishna

Hi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier

R/3 Source system creation for BW

Hi Guru's,
How to create R/3 Source system in BW3.5(Version:IDES) of logical system name- T90CLNT090.
Please tell me what shud be the IP Address and Login details (Userid= ALE_MASTER). If possible plz give me the Password for user ALE_MASTER.
Points will be rewarded those give all the answers for questions mentioned above.
Thank you.

Hi Harshal,
You can choose to create a new R/3 source system using the first option (Automatic Creation). Here, you create a new destination and give the details of the new server details (your IDES system). This will create all the necessary ports and connections.
Here, you will need to create a system user (ALE_MASTER in your case). Setup this user as a system user in transaction SU01 before you start creating the connection to the new system. Create this user in both systems (BW and IDES).
Password for ALE_MASTER can be anything you set. Just remember the password if any maintenance of this user is needed in future.
Hope this helps.
Thanks and Regards
Subray Hegde

With out source system creation we have transported all the flow

Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran Kumar

Hi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet

R/3 Source system creation

Hello,
I wish to add an R/3 system to my BI 7.0 system. What exactly do I need to enter in the "Create SAP Source System" window? Should I leave backgrounduser as ALEREMOTE? I dont see any option of automatic source system creation. Could u pls help me with a step by step solution.
Thanks. POINTS WILL BE GIVEN.
SD

Hi
Defining the source system
As of release 640, you can use upper and lower case characters for R/3 user passwords. This is only uppercase characters for previous releases. Remember that your passwords are automatically converted to uppercase in previous Basis releases.
As BI 7.0 System has Basis 700 below, upper and lower case passwords are important.
So, for defining source system is almost same as ordinary BW Source System definitions.
One more important thing is that you have to take into account the EDI Ports. This may cancel your system definition if the <spsettings are not correct. This settings must be controlled on both BI and Source System.</p>
Here are the steps to configure Source System with Basis Relase lower than 640 in BI 70:
1. Take a look at table EDIPORT of your BW system and note the next free number for the field "Port". This is the adjacent number of the highest entry like 'A0000000123' for example. In this case e.g. take '124'.
2. Choose transaction "snum" and object "ediport".
Select "number ranges" from the menu "Goto" and here the button "status".
Change the CURRENT NUMBER of the ranges to the next free number you noted from table EDIPORT.
If the number range of your BW system is correct please check the same in your OLTP system.
3. Call TCODE RSA1 on BI System in BI Client.
4. Select Source Systems on Left Menu
5. Left Click SAP System and Choose Create
6. Important think is, as source system has Basis Release Lower than 640, You have to give All Passwords (For BI ALEREMOTE User and for Source System ALEREMOTE User) in UPPERCASE.
My Favourite is giving RFCCPIC for ALEREMOTE Passwords.
7. It Must Be OK.
Assign points if it helps
Regards,
Sumit

Datasource Creation for Informatica Source system in NW2004s

Hi,
We are upgrading BW 3.5 to SAP NW2004s. In NW2004s Create datasource
is new feature provided in BW 7.0.
I tried to create this datasource for Flat file and worked fine. We
are also using Informatica as source system (External System).
Whenever I tried to create datasource for External system such as
Informatica, it gives message
"Datasource ZTEST(INFPCPD):Object Type RSDS not supported in BAPI
Source System"
Is it a bug? or Creation of datasource is not supported incase of
Informatica or external system?
Thanks
Rupesh

Hi Rupesh,
The latest BI release in SAP NetWeaver 7.0 (2004s) includes a new type of DataSource for which staging BAPI has not yet been aligned.
Third party ETL tool vendors can therefore only implement their load processes using the original type of DataSource from BW 3.x. This DataSource is still provided in the new release without any changes. Upgrading to NetWeaver 7.0 (2004s) BI (BI 7.0) does not therefore endanger existing implementations based on BW 3.x and NetWeaver 2004 (BW 3.5).
It is also possible to migrate third party ETL implementations based on BW 3.x into the new data-flow concept of a NetWeaver 7.0 (2004s) BI environment using new DataSources, transformations (also new), and data transfer processes (DTP) (also new). This is possible because the system provides an emulated view for BW 3.x DataSources, which makes it possible to combine them with NetWeaver 7.0 (2004s) transformations and DTPs for regular batch load processing (this does not include direct access and real-time data acquisition (RDA)).
This allows the benefits of the new data loading concept to be made available in such third party ETL-based loading scenarios.
Regards,
Anil

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

Issue in source system creation under sap node

hi,
i am facing a strage issue here while creating a sap source system.
i have two development systems - bd1 for bi development, rd1 for r/3 development. rfc is propely maintained between both of the systems. now im creating the source sytsem under transaction rsa1 - source sytem - sap, i put in all the details and it prompts me to log in to the source system as well. it creates the system properly but the problem is that im creating it under the node sap and it goes under the node bi.
i have deleted it from there and repeated the same process again but still everytime it comes only under the node bi irrespectiv e of the thing that im creating it under sap.
this is the first time im facing this strange issue i have done the same process many time but never seen nething like this, does anyone have any idea for the same.
kindly give ur inputs.
thanks
dipika

Hi Dipika,
It is not an operational issue. Its just a display and should not have any problems.
Please go through the below SAP Note to fix the issue.
[Note 1087980 - ECC Source systems appearing in BI folder|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1087980]
Regards,
Gaurav
Edited by: Gaurav Kothari on Aug 31, 2009 4:20 PM

Creation of Source System

Dear all,
i am new to BI 7.0. can you help me how to create source system.

Hi,
You can actually create many type of source systems depending on your business requirements.
Go to RSA1 transaction in BI.
choose Source system. Depending on the type of system you require, right click and choose create.
then you have to follow the procedure it says.
As in case of SAP source sytem you have to give the R/3 system name/ID etc and user name/password to connect to and from R/3 system.
For this you have to maintain RFC destination to communicate to and from R/3 system to BI system. Then it will login to the R/3 system and will comeback to BI and start transferring matadata and BI contents from R/3, choose without dialog option when it ask you otherwise it will ask you every time it will transfer new object.
Assign points if it helps..........

Creation of R/3 source system

Similar Messages

Maybe you are looking for