Creation of Recovery Disks - 'Failed to open the following file" Error
Greetings All,
I am in the process of trying to create a Recovery Disk Set for a Client's *Satellite L300 - PSLB8A-07U004*.
While the application opens and begins the creation of the disk set, it has, three times now, failed at with the error message of *"Failed to open the following file. D:\!V5_01_07.VRP (Error Code: 020123-F1-00000000)".*
I did attempt this process the first time while the all the client's data was still loaded.
I have now done a 'Restore to 'Out of the box experience' because I thought one of those files might be the cause but, alas, the error was repeated.
Obviously this is irritating (to say the least).
I have NOT made any change to the layout or sizing of partitions.'
Any thoughts?
rampant_rhino
Thank you both for your responses.
You were on the right track.
I was attempting to use a 'dodgy' brand (SKY-Silver) of DVD-R for the creation of the disk set.
On changing over to TDK disks, the problem did NOT repeat.
Strangely enough, the dodgy ones worked great for creating copies of the set once it was completed.
Again, thanks to you both.
Similar Messages
-
'failed to open the PDF file' error - Indesign CS3 on Mac
Hi,
Whenever I place PDFs that were created by any other app besides indesign or Illustrator I get a 'failed to open the PDF file' error, previously these PDFs were fine to place but all of a sudden they're not... Help?
I'm not too keen on opening in Illustrator and resaving for the rest of the foreseeable future either...
JaredThanks for the reminder, Scott.
http://indesignsecrets.com/failed-to-open-pdf-error-show-options-to-fix-it.php
Bob -
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.Ok, so let's start at step 1:
SP 1 just released and I'd recommend applying that. The SO is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
For future reference, msm matching the above SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
and msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
Step 2: a few questions:
a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
b) what is the database you are connecting to?
c) is this a web or a win app?
Step 3: As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
3) If that works, use a report with subreports
4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
5) Run the new report in your new app, enter the PWD when prompted
6) If this works, add your database logon code
7) If that works, add your original report (again, preferably with no subreports)
8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
9) If it works, see if you can determine the difference between your old app and the new app.
Ludek -
I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htmHi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Content generation error. Failed to open the InDesign file.
Hey all -
In importing an article to a folio, I just received this error:
"Content generation error.
Failed to open the InDesign file. Please confirm the file can be opened in InDesign."
The file is open right now in InDesign. I can close it and reopen it with no errors.
I've tried resaving the article to a new file. No help.
I tried creating a new folio and importing the article there. No help.
All links are good. It's a simple file with images, a scrolling pane, and some buttons that link to other articles.
Anyone else run into this problem? Any solutions?
Thanks!Im getting this error also....?
Want to avoid inporting each artical on at a time. Need to import multiple articals at once.
Thanks. -
I have to place a large number of PDF files. Sometimes I get an error: "Failed to open the PDF file". In the InDesign Forum I found that this also happens in the GUI from time to time and that the workaround is to turn on the Show Import Options. But this is obviously not an option for me.
Is there any alternative?
Thank you, RalfWhen you retry, is it always the same PDF?
Otherwise I'd play around like
- catch the error
- perform some potential cleanup of resources (files, memory), e.g. SaveAs, or a Close-Reopen cycle
- retry the same PDF
Dirk -
Failed to open the connection. Error in the Designer when copying ...
I have two different systems I am developing an application on.
I copy the entire directory from one system to the other. Both systems have the same environment:
Visual Studio 2010
Crystal Reports for Visual Studio 2010 (the production release, or I think it is the vesion is 13.0.2.0 is the version on the assemblies)
SQL 2008 R2
Today, I started adding Crystal reports to this VS solution. I have a reportdriver class that exports all the reports to an HTTP Stream, but we can sit that aside for now. The problem I am having is strictly with the integrated designer.
I have a bunch of existing reports written for an old Sybase databse. I have ported them to SQL and the table structure matches. I simply add the report to my project, point it to the new datasource (using "Set Datasource Location" - OLE ADO SQL) and then preview the report to be sure it runs.
I am just using "localhost" as my server name for the OLE connection so I...in theory... don't have to change the data source to view it on the other system. Both systems have SQL 2008 R2 installed locally. For my login credentials, I use SQL Security and use the same database login/password on both development machines andthe production server.
Today, I copied my entire project to the other PC (as I do almost every day).. When I open any of the reports (in VS) and try to preview them I get:
Failed to open the connection.
Details: ADO Error Code: 0x80004005
Source: Microsoft OLE DB Provide for SQL Server
Description: [DBNETLIB][ConnectionOpen (Connect().]SQL Server does not exist or access denied.
SQL State: 08001
Native Error: 17 [Database Vendor Code: 17]
I can only guess that I am using two different OLE ADO drivers on the two systems or there is something embedded in the rport or somewhere in my solution that "knows" I am not really on the same system that I initially set them up on and previewd them with.
Am I on the right track? Any idea how I can fix this? Obviously, I don't want to have to setup the datasource for every report in my application (if I do that, the report works) when I copy it from the development to the production server.
I am in a real bind here and under a fast aproaching deadline. Any help is much appreciated!!!
ShayneDon't use localhost as your server name. It's a reserved name and should not be used in code.
Try this also [Kbase |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333433363339%7D.do] SAP Note 1553469 - How to enable Database logging in Crystal Reports for Visual Studio 2010
Edited by: Don Williams on Jan 30, 2011 6:02 AM -
Failed to open the target schema error
Hi,
I am using JDeveloper 10.1.3.1.
I created a soap service in ESB to consume one of Jive forum web service and a routing service to supply information to the soap service to call a method in the web service. When I tried to create the mapping, I got the following error:
Failed to open the target schema: Invalid reference: 'http://webservices.forum.jivesoftware.com:User'
And the design view of the mapping file (.xsl) file shows nothing on Target area.
Anybody has any idea where the problem lies? Below is the WSDL:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://jivesoftware.com/webservices" xmlns:tns="http://jivesoftware.com/webservices" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soap12="http://www.w3.org/2003/05/soap-envelope" xmlns:ns1="http://webservices.forum.jivesoftware.com" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc11="http://schemas.xmlsoap.org/soap/encoding/" xmlns:soapenc12="http://www.w3.org/2003/05/soap-encoding" xmlns:ns2="http://base.jivesoftware.com" xmlns:soap11="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<wsdl:types>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://jivesoftware.com/webservices"><xsd:element name="getUsers"><xsd:complexType/></xsd:element><xsd:element name="getUsersResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:ArrayOfUser"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="setUserProperty"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="name" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="value" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="userID" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="setUserPropertyResponse"><xsd:complexType/></xsd:element><xsd:element name="UserNotFoundException" type="ns2:UserNotFoundException"/><xsd:element name="deleteUserProperty"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="name" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="userID" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="deleteUserPropertyResponse"><xsd:complexType/></xsd:element><xsd:element name="getUser"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="id" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="deleteUser"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="userID" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="deleteUserResponse"><xsd:complexType/></xsd:element><xsd:element name="getUsersByEmailAddress"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="emailAddress" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUsersByEmailAddressResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:ArrayOfUser"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserByEmailAddress"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="emailAddress" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserByEmailAddressResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserProperties"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="userID" type="xsd:long"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserPropertiesResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:ArrayOfProperty"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserByUsername"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="username" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserByUsernameResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUsersBounded"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="startIndex" type="xsd:int"/><xsd:element maxOccurs="1" minOccurs="1" name="numResults" type="xsd:int"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUsersBoundedResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:ArrayOfUser"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="getUserCount"><xsd:complexType/></xsd:element><xsd:element name="getUserCountResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" type="xsd:int"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="createUser"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="username" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="password" nillable="true" type="xsd:string"/><xsd:element maxOccurs="1" minOccurs="1" name="email" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="createUserResponse"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="out" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="UserAlreadyExistsException" type="ns2:UserAlreadyExistsException"/><xsd:element name="updateUser"><xsd:complexType><xsd:sequence><xsd:element maxOccurs="1" minOccurs="1" name="user" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType></xsd:element><xsd:element name="updateUserResponse"><xsd:complexType/></xsd:element></xsd:schema>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://webservices.forum.jivesoftware.com"><xsd:complexType name="ArrayOfUser"><xsd:sequence><xsd:element maxOccurs="unbounded" minOccurs="0" name="User" nillable="true" type="ns1:User"/></xsd:sequence></xsd:complexType><xsd:complexType name="User"><xsd:sequence><xsd:element minOccurs="0" name="ID" type="xsd:long"/><xsd:element minOccurs="0" name="creationDate" type="xsd:dateTime"/><xsd:element minOccurs="0" name="email" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="emailVisible" type="xsd:boolean"/><xsd:element minOccurs="0" name="modificationDate" type="xsd:dateTime"/><xsd:element minOccurs="0" name="name" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="nameVisible" type="xsd:boolean"/><xsd:element minOccurs="0" name="password" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="passwordHash" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="username" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType><xsd:complexType name="ArrayOfProperty"><xsd:sequence><xsd:element maxOccurs="unbounded" minOccurs="0" name="Property" nillable="true" type="ns1:Property"/></xsd:sequence></xsd:complexType><xsd:complexType name="Property"><xsd:sequence><xsd:element minOccurs="0" name="name" nillable="true" type="xsd:string"/><xsd:element minOccurs="0" name="value" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType></xsd:schema>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://base.jivesoftware.com"><xsd:complexType name="UserNotFoundException"><xsd:sequence><xsd:element minOccurs="0" name="userID" type="xsd:long"/><xsd:element minOccurs="0" name="username" nillable="true" type="xsd:string"/></xsd:sequence></xsd:complexType><xsd:complexType name="UserAlreadyExistsException"/></xsd:schema>
</wsdl:types>
<wsdl:message name="getUsersBoundedResponse">
<wsdl:part name="parameters" element="tns:getUsersBoundedResponse"/>
</wsdl:message>
<wsdl:message name="updateUserResponse">
<wsdl:part name="parameters" element="tns:updateUserResponse"/>
</wsdl:message>
<wsdl:message name="UserAlreadyExistsException">
<wsdl:part name="UserAlreadyExistsException" element="tns:UserAlreadyExistsException"/>
</wsdl:message>
<wsdl:message name="getUsersBoundedRequest">
<wsdl:part name="parameters" element="tns:getUsersBounded"/>
</wsdl:message>
<wsdl:message name="updateUserRequest">
<wsdl:part name="parameters" element="tns:updateUser"/>
</wsdl:message>
<wsdl:message name="deleteUserPropertyResponse">
<wsdl:part name="parameters" element="tns:deleteUserPropertyResponse"/>
</wsdl:message>
<wsdl:message name="createUserRequest">
<wsdl:part name="parameters" element="tns:createUser"/>
</wsdl:message>
<wsdl:message name="getUserRequest">
<wsdl:part name="parameters" element="tns:getUser"/>
</wsdl:message>
<wsdl:message name="setUserPropertyRequest">
<wsdl:part name="parameters" element="tns:setUserProperty"/>
</wsdl:message>
<wsdl:message name="deleteUserResponse">
<wsdl:part name="parameters" element="tns:deleteUserResponse"/>
</wsdl:message>
<wsdl:message name="setUserPropertyResponse">
<wsdl:part name="parameters" element="tns:setUserPropertyResponse"/>
</wsdl:message>
<wsdl:message name="getUserCountResponse">
<wsdl:part name="parameters" element="tns:getUserCountResponse"/>
</wsdl:message>
<wsdl:message name="getUserByEmailAddressResponse">
<wsdl:part name="parameters" element="tns:getUserByEmailAddressResponse"/>
</wsdl:message>
<wsdl:message name="getUserResponse">
<wsdl:part name="parameters" element="tns:getUserResponse"/>
</wsdl:message>
<wsdl:message name="deleteUserPropertyRequest">
<wsdl:part name="parameters" element="tns:deleteUserProperty"/>
</wsdl:message>
<wsdl:message name="getUserByUsernameResponse">
<wsdl:part name="parameters" element="tns:getUserByUsernameResponse"/>
</wsdl:message>
<wsdl:message name="getUserByUsernameRequest">
<wsdl:part name="parameters" element="tns:getUserByUsername"/>
</wsdl:message>
<wsdl:message name="getUserByEmailAddressRequest">
<wsdl:part name="parameters" element="tns:getUserByEmailAddress"/>
</wsdl:message>
<wsdl:message name="createUserResponse">
<wsdl:part name="parameters" element="tns:createUserResponse"/>
</wsdl:message>
<wsdl:message name="getUsersRequest">
<wsdl:part name="parameters" element="tns:getUsers"/>
</wsdl:message>
<wsdl:message name="getUsersResponse">
<wsdl:part name="parameters" element="tns:getUsersResponse"/>
</wsdl:message>
<wsdl:message name="getUsersByEmailAddressRequest">
<wsdl:part name="parameters" element="tns:getUsersByEmailAddress"/>
</wsdl:message>
<wsdl:message name="deleteUserRequest">
<wsdl:part name="parameters" element="tns:deleteUser"/>
</wsdl:message>
<wsdl:message name="getUserCountRequest">
<wsdl:part name="parameters" element="tns:getUserCount"/>
</wsdl:message>
<wsdl:message name="getUserPropertiesResponse">
<wsdl:part name="parameters" element="tns:getUserPropertiesResponse"/>
</wsdl:message>
<wsdl:message name="getUsersByEmailAddressResponse">
<wsdl:part name="parameters" element="tns:getUsersByEmailAddressResponse"/>
</wsdl:message>
<wsdl:message name="getUserPropertiesRequest">
<wsdl:part name="parameters" element="tns:getUserProperties"/>
</wsdl:message>
<wsdl:message name="UserNotFoundException">
<wsdl:part name="UserNotFoundException" element="tns:UserNotFoundException"/>
</wsdl:message>
<wsdl:portType name="ProfileServicePortType">
<wsdl:operation name="getUsers">
<wsdl:input name="getUsersRequest" message="tns:getUsersRequest"/>
<wsdl:output name="getUsersResponse" message="tns:getUsersResponse"/>
</wsdl:operation>
<wsdl:operation name="setUserProperty">
<wsdl:input name="setUserPropertyRequest" message="tns:setUserPropertyRequest"/>
<wsdl:output name="setUserPropertyResponse" message="tns:setUserPropertyResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="deleteUserProperty">
<wsdl:input name="deleteUserPropertyRequest" message="tns:deleteUserPropertyRequest"/>
<wsdl:output name="deleteUserPropertyResponse" message="tns:deleteUserPropertyResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUser">
<wsdl:input name="getUserRequest" message="tns:getUserRequest"/>
<wsdl:output name="getUserResponse" message="tns:getUserResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="deleteUser">
<wsdl:input name="deleteUserRequest" message="tns:deleteUserRequest"/>
<wsdl:output name="deleteUserResponse" message="tns:deleteUserResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUsersByEmailAddress">
<wsdl:input name="getUsersByEmailAddressRequest" message="tns:getUsersByEmailAddressRequest"/>
<wsdl:output name="getUsersByEmailAddressResponse" message="tns:getUsersByEmailAddressResponse"/>
</wsdl:operation>
<wsdl:operation name="getUserByEmailAddress">
<wsdl:input name="getUserByEmailAddressRequest" message="tns:getUserByEmailAddressRequest"/>
<wsdl:output name="getUserByEmailAddressResponse" message="tns:getUserByEmailAddressResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUserProperties">
<wsdl:input name="getUserPropertiesRequest" message="tns:getUserPropertiesRequest"/>
<wsdl:output name="getUserPropertiesResponse" message="tns:getUserPropertiesResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUserByUsername">
<wsdl:input name="getUserByUsernameRequest" message="tns:getUserByUsernameRequest"/>
<wsdl:output name="getUserByUsernameResponse" message="tns:getUserByUsernameResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
<wsdl:operation name="getUsersBounded">
<wsdl:input name="getUsersBoundedRequest" message="tns:getUsersBoundedRequest"/>
<wsdl:output name="getUsersBoundedResponse" message="tns:getUsersBoundedResponse"/>
</wsdl:operation>
<wsdl:operation name="getUserCount">
<wsdl:input name="getUserCountRequest" message="tns:getUserCountRequest"/>
<wsdl:output name="getUserCountResponse" message="tns:getUserCountResponse"/>
</wsdl:operation>
<wsdl:operation name="createUser">
<wsdl:input name="createUserRequest" message="tns:createUserRequest"/>
<wsdl:output name="createUserResponse" message="tns:createUserResponse"/>
<wsdl:fault name="UserAlreadyExistsException" message="tns:UserAlreadyExistsException"/>
</wsdl:operation>
<wsdl:operation name="updateUser">
<wsdl:input name="updateUserRequest" message="tns:updateUserRequest"/>
<wsdl:output name="updateUserResponse" message="tns:updateUserResponse"/>
<wsdl:fault name="UserNotFoundException" message="tns:UserNotFoundException"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="ProfileServiceHttpBinding" type="tns:ProfileServicePortType">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="getUsers">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUsersRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUsersResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="setUserProperty">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="setUserPropertyRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="setUserPropertyResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="deleteUserProperty">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="deleteUserPropertyRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="deleteUserPropertyResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUser">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="deleteUser">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="deleteUserRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="deleteUserResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUsersByEmailAddress">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUsersByEmailAddressRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUsersByEmailAddressResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="getUserByEmailAddress">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserByEmailAddressRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserByEmailAddressResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUserProperties">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserPropertiesRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserPropertiesResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUserByUsername">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserByUsernameRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserByUsernameResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="getUsersBounded">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUsersBoundedRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUsersBoundedResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="getUserCount">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="getUserCountRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="getUserCountResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="createUser">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="createUserRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="createUserResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserAlreadyExistsException">
<wsdlsoap:fault name="UserAlreadyExistsException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="updateUser">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="updateUserRequest">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="updateUserResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
<wsdl:fault name="UserNotFoundException">
<wsdlsoap:fault name="UserNotFoundException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="ProfileService">
<wsdl:port name="ProfileServiceHttpPort" binding="tns:ProfileServiceHttpBinding">
<wsdlsoap:address location="http://aarc1.us.oracle.com:7777/owc_discussions_nosso/rpc/soap/ProfileService"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Thank you.
Message was edited by:
user579972Let me add more information. The web service is provided online from the application and I didn't make a local copy or modify it.
I tested the web service using SOAP UI and worked like a charm.
I made another test just now by only creating Soap service to use the WSDL and allow the external invocation. Then I call the ESB wsdl (soap service WSDL) from SOAP UI and got the following error. It seems to me, ESB incorrectly format the soap request to Jive or the ESB has problem handling the request from SoapUI.
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault>
<faultcode>env:ESBMessageProcessingFailed</faultcode>
<detail>
<EventName>JiveESB.ProfileService.createUser</EventName>
<Cause>An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: application/xop+xml; type="text/xml"; charset=UTF-8
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1717)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1463)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1185)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:507)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:430)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:447)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:184)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:112)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:106)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:85)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1416)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(EventOracleSoapProvider.java:314)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(EventOracleSoapProvider.java:187)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:436)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:539)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:430)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:447)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:184)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:112)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:106)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:85)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1416)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(EventOracleSoapProvider.java:314)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(EventOracleSoapProvider.java:187)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:436)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: oracle.j2ee.ws.saaj.ContentTypeException: Not a valid SOAP Content-Type: application/xop+xml; type="text/xml"; charset=UTF-8
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1717)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1463)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1185)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:507)
... 28 more
".</Cause>
</detail>
</env:Fault>
</env:Body>
</env:Envelope>
Thanks. -
Reg FRM-18108: Failed to load the following objects Error
Hi All,
I am getting the following error when i open a form.
FRM-18108: Failed to load the following objects.
Source Module:Referenc.olb
Source Object: POST-RECORD
Source Module:Referenc.olb
Source Object: KEY-CLRFRM
Source Module:Referenc.olb
Source Object: KEY-DOWN
Source Module:Referenc.olb
Source Object: KEY-DUP-ITEM
Source Module:Referenc.olb
Source Object: KEY-DUPREC
Source Module:Referenc.olb
Source Object: KEY-ENTQRY
Source Module:Referenc.olb
Source Object: KEY-EXEQRY
Source Module:Referenc.olb
Source Object: KEY-EXIT
Source Module:Referenc.olb
Source Object: KEY-HELP
Source Module:Referenc.olb
Source Object: KEY-MENU
Source Module:Referenc.olb
Source Object: KEY-UP
Source Module:Referenc.olb
Source Object: PRE-BLOCK
Source Module:Referenc.olb
Source Object: WHEN-NEW-FORM-INSTANCE
Source Module:Referenc.olb
Source Object: WHEN-NEW-ITEM-INSTANCE
Source Module:Referenc.olb
Source Object: WHEN-WINDOW-CLOSED
Source Module:Referenc.olb
Source Object: AL_ERROR
Source Module:Referenc.olb
Source Object: AL_INFORMATION
Source Module:Referenc.olb
Source Object: AL_WARNING
Source Module:Referenc.olb
Source Object: ABOUT
Source Module:Referenc.olb
Source Object: TOOLBAR
Source Module:Referenc.olb
Source Object: ABOUT
Source Module:Referenc.olb
Source Object: TOOLBAR
Source Module:Referenc.olb
Source Object: PM_STANDARD
Source Module:Referenc.olb
Source Object: PC_DISPLAY_ITEM
Source Module:Referenc.olb
Source Object: PC_FRAME
Source Module:Referenc.olb
Source Object: PC_ICON_BUTTON
Source Module:Referenc.olb
Source Object: PC_LIST_OF_VALUES
Source Module:Referenc.olb
Source Object: PC_OK_BUTTON
Source Module:Referenc.olb
Source Object: PC_TEXT_ITEM
Source Module:Referenc.olb
Source Object: VA_CURRENT_RECORD
Source Module:Referenc.olb
Source Object: VA_SCROLLBAR
Source Module:Referenc.olb
Source Object: VA_ALERT
Source Module:Referenc.olb
Source Object: VA_BUTTON_TEXT
Source Module:Referenc.olb
Source Object: VA_CANVAS
Source Module:Referenc.olb
Source Object: VA_CURRENT_BUTTON
Source Module:Referenc.olb
Source Object: VA_CURRENT_ITEM
Source Module:Referenc.olb
Source Object: VA_DISPLAY_ITEM
Source Module:Referenc.olb
Source Object: VA_FRAME
Source Module:Referenc.olb
Source Object: VA_LOV
Source Module:Referenc.olb
Source Object: VA_PROMPT_TEXT
Source Module:Referenc.olb
Source Object: VA_TEXT_ITEM
Source Module:Referenc.olb
Source Object: VA_TOOLTIP
Source Module:Referenc.olb
Source Object: VA_WINDOW
Source Module:Referenc.olb
Source Object: ABOUT
But i have given the the path of the folder that has all the files in the Forms_Path registry and also in the default.env file. Still i am getting the above error. Any solution for this?.You are getting this error because the "Referenc.olb" object library (OL) is not in your FORMS_PATH. You can either add the directory where the OL resides to the PATH environment variable or (preferably) you add the directory to the FORMS_PATH in the Windows Registry (assuming you installed Forms on a Windows computer). Modifying the FORMS_PATH is dependent on the version of Forms you installed. For Forms 10g, modify: HKEY_LOCAL_MACHINE => SOFTWARE => Oracle => KEY_DevSuiteHome10g => FORMS_PATH String Value. For previous versions of Oracle Forms, modify: HKEY_LOCAL_MACHINE => SOFTWARE=> Oracle => HOME? => FORMS??_PATH (where ? = 0 - 9 depending on the number of Oracle products installed, and where ?? = 60, 90 if you have Forms 6 or Forms 9i installed (FORMS60_PATH or FORMS90_PATH).
Hope this helps,
Craig B-)
If a response is helpful or correct, please mark it accordingly. -
I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?
Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week. -
Unable to use Hp Recovery Disk (Shipped Direct from HP) Copy File Error for Windows 8
I have a Windows 8 HP Envy Dv6-7210US Laptop, I had to order recovery disk from HP to reinstall on the same size hard drive (Hard drive was wiped clean) but in doing so the disc work till got to Disc 2 and then it popped up an Error message (See link to view message). I had this same issue with Windows 7 back last year in 2013 and HP sent me a link to use a Cyberlink Utility to help in aid reinstalling the recovery disk. Unfortunately this doesn't work on Windows 8 as I have tried many times. I contacted HP and all they want to do is send me out more recovery disc but I already paid for the ones that I had purchased (18.00$) and I think it is a waste of time. If HP knows this error exist then why not issue a fix with it when they ship out recovery disc or whom ever makes these disc? Does any one have any suggestions?
Error Message
This question was solved.
View Solution.Hi:
I have a possible workaround for you to install a plain version of W8 x64 OEM.
Download this W8 OEM ISO file from the link below. It should work with the embedded W8 product key in your PC's BIOS.
https://docs.google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?pli=1
Then use this tool to transfer the file to a 4 GB USB flash drive or DVD. The tool will also make the file bootable.
http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool
After you get W8 installed, you can install the drivers and available software you need from your dv6-7210us support and driver page.
http://h10025.www1.hp.com/ewfrf/wc/product?product=5316899&lc=en&cc=us&dlc=en&task= -
I have a BB Curve 9300 and had problems syncing with desktop manager. After exhausting the offered solutions such as temporarily disabling antivirus software I ended up uninstalling the DM. Unfortunately I can't find the original disc to download the DM to my PC but when I googled this is advised me that I could download the software without the disc. I found the desktop software download section on the BB website but whenever I download this file: 610_b038_multilanguage.exe, it doesn't open and dissappears from my screen. Please help, I am very new to all this technology but am getting incredibly frustrated- this has occupied much of my weekend trying to sort it out. Thanks in anticipation.
Hello,
Can you please specify what type of computer you have? Try downloading it from here: BlackBerry Desktop Software http://bbry.lv/9CBxoS remember the directory you save it to.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
I am using the most recent version of Adobe reader, have uninstalled and reinstalled multiple times to no avail.
How To Change the Authorized Adobe ID
http://www.adobe.com/go/digital-editions-createID
What do you do if your copy of Adobe Digital Editions is authorized with the wrong Adobe ID? This can happen if you’ve started using a different Adobe ID or you somehow messed up the authorization in the past.
If you’re trying to open an ebook when Adobe Digital Editions is authorized with the wrong Adobe ID, you’ll get an error message like: “License fulfilled by a different user” or something similar referencing licensing or authorization.
Important note: If you have some ebooks that do require your current authorization, those will become unreadable if you authorize with a different Adobe ID.
deauthorize
The first thing to do is deauthorize Adobe Digital Editions. This will remove your current authorization.
1. Open Adobe Digital Editions
2. On your keyboard, simultaneously press the Ctrl, Shift, and D buttons (if on Windows) or the Cmd, Shift, and D buttons (if on a Mac)
3. Click the “Deauthorize” button
After this you should close Adobe Digital Editions, and then open it again.
re-authorize
If you’ve followed the steps above, your copy of Adobe Digital Editions is no longer authorized.
Open Adobe Digital Editions
Adobe Digital Editions will behave as if you’ve just installed it, and will prompt you to enter your login information for your Adobe ID. Use the Adobe ID account information that you want to use to authorize Adobe Digital Editions. -
Failed to open source schema file:null Error Xform File Creation - CustomerPartyEBM
Hi All,
We are creating a Provider ABCS which is generated by AIA Service Constructor with SyncCustomerPartyList Operation in CustomerPartyEBM, We are able to compile the process susccesfully but when we create a Trasformation file with source as CustomerPartyEBM and Target has Siebel ABM, then the xsl file in design view pops up a error message saying - "Failed to open source schema file:null". When tried with other EBM's its working fine its only for CustomerPartyEBM.
Do anyone had idea on this?
Thanks a lot,
RR.Thank you both for your responses.
You were on the right track.
I was attempting to use a 'dodgy' brand (SKY-Silver) of DVD-R for the creation of the disk set.
On changing over to TDK disks, the problem did NOT repeat.
Strangely enough, the dodgy ones worked great for creating copies of the set once it was completed.
Again, thanks to you both. -
CrystalReportViewer Failed to Open the connection Unable to retrieve Object
I am getting the following Error on trying to view a report in the CMC and the Infoview.
CrystalReportViewer
Failed to Open the connection. ReportName
Unable to retrieve Object.
Failed to open the connection. ReportName
I have recently re-installed Crystal Reports Server XI on a server after a disk failure. I had a backup of my CMS database. I reinstalled the Crystal Servwer without atttaching this database, however crystal did not create a new db so I attached my old one.
I have deleted all my old ODBC connections and recreated them with new names and then reconnected my reports in Crystal Reports XI using the "Set Datasource Location" option and the report works fine.But as soon as I try to view it after uploading it as an object onto the server, I get the above error.
Any help would be appreciated.I am tagging into this unanswered question as well because I think I have a similar issue. In my case I have a report which runs correctly in Crystal Reports designer but when I move it to the scheduler it fails on a "Failed to connect" to the report. In have used "Set data location" to no avail. When I go to Admin Tools and look at the complete list of datasources for all my reports this particular datasource is listed twice. The group of reports under one of the datasources works correctly. The reports listed under the second datasource all fail. The two datsources are spelled exactly the same and when I sompare the database details for a successfull and a failing report using this datasource they are the same (in the console and in infoview).
I have also checked the ODBC connections on the Crystalserver and there is only one occureence.
Any ideas?
Thanks!
Maybe you are looking for
-
Transfer of data from q5 to bold 9000
hi - have been using bbq5 - some hardware issue and for 15days need to use old phone which is bold 9000- how do i transfer my back up of q5 to bold 9000 - pl. guide - thanks
-
Scheduled Excel/CSV output with 65k rows
Hi Experts, I just wanted to confirm if in 3.1, can the scheduled excel/csv output handle >65 rows. From what we've read, it is possible and we assumed that's thru manual run. However, we aren't too sure if it is the same when scheduled. Kind Regar
-
How to include a report into the SAP-SCRIPT
plz tell me How to include a report into the SAP-SCRIPT ASAP
-
How come my iPhone can show apps need to be updated but iTunes can not?
as stated in title, don't know what has been happening recently on iTunes, can not show any update on apps while my iPhone can... ideas anyone?
-
I am trying to create a login web service but I get the error attached. http://www.4shared.com/photo/TExPz3H_/webservice.html I created a DB connection (HR schema in oracle ) then I created an Application module then in AppModuleImpl.java file I crea