Creation of Restore CD's and reinstallation of system

Ok here goes. I just made the restore cd's on my Lenovo 3000 C200 8922 A2U, Vista. 7 total cd's. After creating the disks I tried to do a system restore to cure some problems. After inserting the cd and going thru the first initial stages it asked for the next disk. Inserted the next disk as they were labeled properly after completion of burn and verification. The system responded with improper disk. I tried all disks just in case of human error and they all responded the same. Here's where it gets good. Cancelled the operation and rebooted the computer only to be told that there was no operating system on the computer. GREAT!!. Retried the operation again with the first cd. No go, same thing happened. I did check all the cd's for data and there is what I would assume to be the proper data on all the disks. So now system is useless and I am assuming I have to contact Lenovo and get restore cd's. What happened? Any ideas? Ran program properly for disk creation and it came back with verification that all disks were created properly. HELP!!

it asks first for operating system disks, skip that step and next it will accept your recovery dvd-s. at least thats how it worked for me. good luck!

Similar Messages

  • Restore after Erase and Install

    Depending on the answer I get to another question, I might have to erase and reinstall system 10.3 on my ancient Yosemite.
    I have already backed up my entire HD to an external drive using third-party backup software. Presumably the backup softare itself has been backed up.
    How do I restore my user settings, Entourage email files, other files, etc. after the erase and install?
    I have run into trouble in the past with reinstalls and don't want to go thru that again.

    These are personal choices only you can make.
    You say you have two places from which to get a working copy of your 10.3 software:
    Choice #1) Erase and install 10.3 from scratch using Apple tools:
    This will give you a positively excellent version of your 10.3 software. But will return you to a completely "factory fresh" version with NONE of your personal files at all.
    Choice #2) Use the Restore function in your Backup software:
    This will return all the files on your Mac to the moment of your Backup, and re-install all personal files along with anything troublesome that had already happened by the time you made your Backup.
    Provided that it works as intended, which is not guaranteed.
    Choice #3) Combined approach:
    1) Erase and Install the System Files with Apple Tools;
    2) then recreate your Users (and their passwords) in System Preferences > Accounts;
    3) use your Backup software to restore the "Users" directory structure, which contains all Users files including email and preferences (except the Account specification and password itself).
    Provided that it works as intended, which is not guaranteed.
    It is possible that despite your best intentions, certain files have not been backed up. Files that come to mind are Address Books, on which the system tends to restrict permissions so that they are difficult to hack and difficult to copy. Keychains may similarly be difficult to backup and restore.

  • HT1351 Some of the songs I bought from iTunes will not sync to my iPhone.  They show up on my phone, but the letters look faed and I can't play them.  How do I fix this?  I tried restoring my iPhone and it didn't work.

    Some of the songs I bought from iTunes will not sync to my iPhone.  They show up on my phone, but the letters look faed and I can't play them.  How do I fix this?  I tried restoring my iPhone and it didn't work.

    Sorry, I meant the letters look "faded" not faed.

  • AirPort Extreme extends my network and has worked well for three months. Now it can no longer extend the network and flashes Amber. I have restored to factory settings moved it closer to time capsule and rebooted the system without luck

    i have a blinking Amber on my extreme now and it cannot extend the network.  It was working fine and nothing has changed. I have restored to factory settings moved it to another room and rebooted the system without luck. Any suggestions

    What OS are you running?
    Please give me a screenshot of the current AE setup..
    I strongly recommend if you have issues.. take control of all the variables. Apple routers have too much auto..
    Here is a list that I use for setups when using Yosemite.. but it relates to any OS.
    You will need to factory reset again to get going.
    Factory reset universal
    Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    Then redo the setup from the computer with Yosemite or whatever you are using.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg AEgen5 for basestation.
    Use AE24ghz and AE5ghz for wireless on each band, with fixed channels as this also seems to help stop the nonsense.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the AE always takes the same IP address.. this is not a problem for router but if the AE is bridged you can have trouble.. Try using the static IP method or control it via the main router dhcp reservations.
    4. Check your share name on the computer/s is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
    5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    6. Set up the extend to the Express using 2.4ghz and then see how good or bad the connection is.. this is better in the old v5 utility but if you hover your mouse over where it shows connection an extra chunk of info comes up.
    I have specifically used 5ghz to make the extend.. because by testing it works better.. but do not be fooled.. this good connection is poor.. the RSSI.. which is difference signal .. at -79dbm is down the bottom of the stable.. and it drops out on a daily basis.. you want to see that signal around -60dbm at min.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.

  • Hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

    hello i just came back from the apple store and they had to restore my phone and i just downloaded all my apps and music back but my photos that are on icloud i only got 80 out of 768 back. what do i do to get all of them back?

    If you tried to restore to your iCloud backup and your photos didn't fully restore, first go to Settings>iCloud>Storage & Backup and make sure it isn't still in the process of restoring.
    If the restore is complete and all your photos weren't restored, all you can do is try restoring the backup again.  You might try the solution posted by ezjules in this discussion: https://discussions.apple.com/message/19518589#19518589.  This involves opening the photos app after the phone restarts and you provide the passwords for your Apple IDs, then leaving it open for the remainder of the restore process.

  • I put all my music from my iphone on my computer and now i only have the new music i just bought and it wont sync and i have to restore my phone and all my new music i will have to repurchase all my new music i can i get it to sync without it happening

    my phone wont sync and it wont put music on my pohone and the new music i just bought will be deleted if i restore my ohine and i will have to re buy all the music i have recently bought

    You will need to do it using a third-party utility such as Phone to PC. Also, see:
    How to dowload purchased music
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I am trying to restore a backup and I cant remember my encrypt password

    I am trying to restore a backup and I cant remember my encrypt password

    That's too bad... restore as new.  There is no way to "hack" or break the encryption.

  • I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. Help

    I am having a big problem. I am not getting notifications from snapchat and only snapchat. I've made sure every notification setting was on and it just won't work. I have also restored my phone and deleted the app and re-downloaded it multiple times. It just wont give me my notifications. Help please.

    Go to Settings > Privacy > Location Services.
    Turn off SnapChat.
    Go to Settings > Notification Center
    Turn off SnapChat.
    Restart the device.
    Go to Settings > Privacy > Location Services.
    Turn on SnapChat.
    Go to Settings > Notification Center
    Turn on SnapChat.
    Test the issue.

  • Unable to update apps on iPad mini. I have even restored the iPad and now I can't download any of my previously purchased apps.

    Can someone help me. I am using an iPad mini with iOS 7.0.4 with wifi connection. Have had no problems until recently when I was unable to update apps and then noticed that some apps would open but no data would be available in apps like intelicast and Pinterest. I have restored the iPad and now I am unable to download any of my previously purchased apps.

    1. Make sure iPad is using the latest software
    2. Settings>General>Date and Time>Set Automatically>On
    3. Make sure Time Zone is correct
    4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo.

  • Any time I open a photo program the application freezes.  I want to reinstall OSX from the original disk and then restore my machine from time machine Will a restore from time machine only restore my Apps and data

    Tried to post a question about restoring my i mac from time machine, but this new format makes no sense to me.  I want to restore my i mac from time machine after I reinstall the OS from the original disk.  Will a time machine restore only restore the applications and data or will it restore the current state of the OS.  My machine will not let me open any photo applications (aperture, I photo, NX 2) I have to force quit them every time I try to get some work done.

    06-sep-2012 0:14 
    Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune  y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada.  Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar,  he buscado para ver si tiene errores  el disco del Ipod y me dice que esta bien.  Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo.  He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien.  Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo.  Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
    I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
    iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA 

  • Creation Profile in Scheduling Agreement and Schedule LIne

    Dear Experts,
    Currently I'm working on Scheduling Agreement and Schedule Line.In standard SAP gives the provision of creation profile.I've gone through the SAP help documentation but I'm not clear on that.I've few doubts on creation profile.
    1. I've created a profile say XXXX for 14 days JIT and 6 months Forecast.And I maintain the same on Scheduling Agreement additional data.
    2.I'm creating delivery schedule respect ot Scheduling agrrement.
    3. I maintain the aggregation horiozon in creation profile as 10 days daily aggregation for JIT and 120 days for monthly aggregation for forecast.
    4.I run MRP for the header material and I maintain the necessary SA number in Source list.
    5. After MRP run I'm not getting the respective schedule lines for JIT and Forecast.
    6. What is the use of creation profile in Scheduling Agrrement and schedule line and is it determine ant schedule lines after MRP run.
    Please clarify me on creaion profile.
    Thanks in advance
    PKB

    Dear Experts,
    I'm not getting any response regarding Creation profile which I posted last week.
    Can anybody explain me the use of Creation profile in Schedule line?
    From Standard SAP help documentation I'm not convince.
    Best Regards
    PKB

  • Firefox crashes upon start with the error message: Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.

    I have tried to open firefox multipul times only to receive the error message:
    We're Sorry
    Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.
    To help us diagnose and fix the problem, you can send us a crash report.
    When I send the report and try to restart firefox and see that I have several tabs open, but it quickly shuts down again before I can do anything other then glance at it.

    http://kb.mozillazine.org/Firefox_crashes

  • If i factory reset my ipod touch(5th gen), can i reset it as the option 'set up as new ipod', and then i can just go into the app store/itunes store and restore my music and apps and not icloud with photos and ect?

    if i factory reset my ipod touch(5th gen), can i reset it to the option 'set up as a new ipod', and then i can just go into the app store/itunes store and log into my apple ID so i can just restore my music and apps and not icloud with photos, contacts, ect. and then later i can add contacts that i need/want instead of them restoring them from icloud?
    The reason i asked this question is because i have been wondering this a lot ever since i got an exchange on this ipod (and ive only had it for a few weeks now) because my last ipod had a lot of problems. so after i restored my ipod with my computer/itunes, i downloaded apps that i wanted, and then when i went to the storage to see how much storage was left, it said 0 bytes. i was freaking out because i didnt know how that could be, i mean, cause like, that is impossible when i just 'purchased' it, that the space was full but i looked and all my pictures were on this ipod and i already put them on my computer so i dont need them anymore thats why i wanna reset it now so there is nothing on it so i can have more space for stuff to do and download on it.
    it is updated to iOS 8 but that happened when i purchased it, so i didnt have a choice to update it even though i didnt want to update to iOS 8...
    and i hope you understand my problem..
    i would REALLY REALLY appreciate it if someone could tell me a solution to my problem!!! thank you so much!
    -sierra

    Hey Sierra, You can do just what you have stated. My question, what is your "other"? If it is over 1.5 GB you most likely have corrupt files. Doing a Restore to New, Factory restore should correct it. Just make sure you make a full backup of all information on your iPod to your computer before you restore, so you don't lose your stuff, contacts, videos, pictures, non-iTunes music, etc, use the cable and connect with your computer. Then, via cable, connect to your computer, run the Restore to new, don't use your backup. Treat this iPod as if it was your first one ever. When restore is done, set up and add what info you wish to install on this iPod. The music apps etc you purchased should be on your computer, if not you should be able to retrieve purchased apps and music from iTunes. Any music, videos, apps not purchased from iTunes will be lost to you if you do not save them to your computer or the cloud first. When your done, make a current Backup and you should good to go. Hope this helps. Good luck. Cheers.

  • Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.

    do not know what's going on but the Firefox crashing, and is still crashing, and crashing back again ..
    This problem is not resolved for a long time 'and I wonder why not fix this problem so far?
    These details.
    We're Sorry
    Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts.
    To help us diagnose and fix the problem, you can send us a crash report.

    I was having the same problem.... But I keep forgetting that when you upgrade firefox... or it updates automatically... you need to right click on the firefox start up icon, go into properties, click on the compatibilities tab, and put a check in the "Run This Program As An Administrator" box, then hit apply. Start Firefox, and it should work OK. Problem is...each time you upgrade firefox and/or I think Adobe flash... you need to make sure that box is checked. This is on Firefox 15.0.1 with Adobe Flash 11.4.402.278 all up to date, Windows 7 64bit. If Firefox has Adobe flash add-on, it needs to run in admin mode or it will crash.

  • How to Clean Install but then retrieve & restore my Keychain and Mailboxes.

    For months now, there have been a large number of irritating problems with my system - and I'm not enough of a techie to resolve them.
    It is as though my machine is stuck in the past.
    Spotlight doesn't index well - and fails to find up to two thirds of my files - including most of the newer ones.
    Dashboard remains at the point at which I upgraded my disk drive. I know this, because a clip from Safari (a web-page with drives for sale) comes up - laboriously slowly - every time I open dashboard; when I delete the clip, it simply reappears the next time I open dashboard after a reboot. Similarly, post-it-style notes made in the Stickies app just vanish after a reboot.
    When I open TextEdit, the same untitled file I was working on back in the early summer opens with it; I close it, it's back again the next time I open TextEdit. Alterations I make to Text substitution disappear the moment I close the panel.
    All new bookmark additions to Safari vanish from my bookmarks when I restart Safari.
    Every time I open iTunes, it thinks I am opening it for the first time. I can't tell you how many times I have agreed to their Software License.
    My iCal alarms go off ad infinitum even when I turn them off and for months after the event in question.
    And so on, and so on. It's like living with an Alzheimer's patient who keeps asking you what day it is.
    I have twice reinstalled Snow Leopard (and rebooted my way through all those software updates) to no avail. My system - or at any rate my applications - still think it's early summer 2010 and any changes since then are forgotten; and Spotlight continues to be virtually useless.
    It seems intuitive that some of these problems might be associated with individual preference files and caches for the various applications. But, even if I knew how to correct such problems, I'm concerned it might take me days - even weeks - of messing around but without solving all of my problems.
    I have to say, I am tired of having half a Macintosh at my disposal. And I'm inclined to do something drastic.
    The obvious solution to these pernickety system problems is completely to reinstall Snow Leopard (onto an erased hard drive) and start from scratch. What has stopped me doing this so far is the fact that, together with the various keycodes that came with my applications, I would also lose all my e-mails and accounts from the Mail application - and all the various passwords in my Keychain.
    Surely there must be some way to retrieve just these select items alone from backup after a clean install? (And - yes, techies - I KNOW that Apple doesn't offer a "clean install" these days but you know what I mean: I want to reset everything; then retrieve a few select items - but WITHOUT the complete migration - which would likely, in the process, reinstate all those corrupted preference files or permissions or whatever it is that is messing around with my machine's short term memory.)
    So here's my question again:
    How - following a "clean install" - do I locate and retrieve the specific ingredients that will restore my mailboxes and keychain to their current state, whilst leaving everything else "clean"?
    Message edited by: Eric M Colvin
    Message was edited by: Eric M Colvin

    An alternative proposal I'm going to make is to set up a new user account. It seems highly likely to me that all, or almost all of these issues are related to the account preference files in ~/Library. Certainly the iTunes issue, Safari, TextEdit, iCal etc. suggest that your account is having trouble with saving any changes to its preference files which would result in anything you tried to do being forgotten the moment the application was closed.
    So for a start, make a new account, log in to it and do a couple of experiments - make some bookmarks in Safari, change some TextEdit options, open iTunes - then close and reopen them, or even restart the machine. If the changes are saved, then it's definitely an account problem and there is no need to reinstall Mac OS. Worst case scenario then would be you might need to move your documents and settings over to the new account; however it's also worth taking a couple of steps to see if the original account can be fixed. Try the above step and if it works; if so, go to /Users and right click your home folder, then 'Get Info'. Under the section dealing with permissions, ensure that your username has both read and write permissions, then use the cogwheel to apply this setting to all folders and files inside your home folder (you may need to use your password to unlock the padlock for this).
    There are other things that can be attempted even before moving to a new user (or reinstalling if the new user test failed) so it's still worth checking back here in case other people suggest steps, it just depends how much time you want to invest.
    As always, back up all your data before troubleshooting.

Maybe you are looking for

  • Lightroom 1.1 hanging

    Hi, First of all: I see the same performance improvements in the filmstrip browsing as others reported. But loading a picture is very slow. What i did: - Upgrade to LR 1.1 - CPU started 100%, i assumed it was doing things and i let it run for 8 hours

  • Mapping to new node with each loop

    Does anyone know how to add a new node to a message each time through a loop (in a BPM) like this.... Source message before the first mapping iteration <source> <data>first occurence</data </source> Target message after the first mapping iteration <t

  • Why won't Pdf open in new tab

    I have foxit pdf and is set to open in new tab ,but it won't

  • Production order with un expected changes

    Dear sir, i have created a production with issue method manual for quantity 20 (parent item) , then i issue components for production with status released, now if quantity that is issued is 100(child item) let us take 30 is consumed ,to produced some

  • Signing problem - worked before now fails

    I have an app that I actually signed and ran on my iPod Tough but it all went downhill from there. This morning I got an E8000001 error that prevented me from building my app. Following one person's suggestion I deleted the app from the iPod but that