Creation of S/W component version
Hi experts
i m on a new project and alone , here we have a scenario of legacy system----
> XI -
>ECC , if i m going for file to idocs do we need to create software component verison in the sld for the integration or what can be the method to kick start the project
pl help , ans will be rewarded..
rgds
mojib
Hi,
SLD-
1) Create a Product/Software Component
2) Technical System pointing to R/3 system
3) Business System for the above technical system
In the Repository
1) Import the Software component created in the sld
2) Create a namespace,
3) import the idoc and then create sender data type/message type etc and mapping
4) Mapping Rules is depends on the requirement
In the Directory
1) Create a Scenario /import the business system
2) Create Receiver/Interface determination
3) Create communication channels for sender and receiver
4) Sender Agreeement and Receiver Agreement.
Then the file adapter configuration is depend on the input file format.
Also you need to have Logical destionation created in the XI , and the IDX1 entry
In R/3 Port, Partner profiles etc should be created
Have a look into this document~
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/877c0d53-0801-0010-3bb0-e38d5ecd352c
While doing an File -> XI -> IDoc scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you will need a sender agreement for the file.
4. In this configuration note that you will also need a receiver agreement for the IDOC.
For any File -> XI -> IDoc scenario ref:
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
Hope this helps you.
Merrilly
Similar Messages
-
Can not view a Software Component Version in Enterprise Services Repository
Hello,
I'm trying to import in ESR the software component version created in the SLD. I'm using SAP PI 7.3.
Into to work area select Software Component Version and click on checkpoint Import from SLD. Click in bottom Display (List of Software Component Versions) and it show me the list but cannot view the Name of the SWC created.
I cleared the cache (Environment - clear sld data cache) and the result it's the same, not show the SWC the I created.
Do you have any idea?
Thank you in advance.
--ervaHi,
as it's a new installation, you certainly missed something. have you did controls of Readiness Check doc and tcode SLDCHECK ([see PI 7.1x oss note|https://service.sap.com/sap/support/notes/1143810]).
and check these post installation controls (but it's for PI 7.1): [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60d2a693-9504-2b10-5ba7-82964bd8370e?QuickLink=index&overridelayout=true]
Mickael -
Some Software Component Versions do not show up in transaction sproxy
I have a landscape with a CRM system, a PI system (with the SLD on it) and some other systems.
In transaction sproxy in the CRM system the Software Component Version SAP CRM ABAP 7.0 shows up, but others that should be there like SAP ABA 7.01 are not there.
So I went on the SLD and edited the technical system for the CRM system, I added the product SAP CRM 7.00 and set the checkmark for installed for the relevant SWCVs like SAP ABA 7.01.
I then went to the business system for the relevant CRM client and there also checked those SWCVs.
But still they do not show up in transaction sproxy in the CRM system.
What am I missing?Hi Monika,
There's several suggestions that you could look at to help resolve your problem in this thread:
[Can't find ESA ECC-SE 603 SWCV;
Regards, Trevor -
Unable to read software component versions from System Landscape Directory
Hi XI,
Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
Could you please give me some hints?
Thanks,
Brucehi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regards
Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM -
Unable to read software component version from System Landscape Directory "
I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1. Call the wizard-based configuration tool as described in Configuration Wizard.
2. Select the scenario PI and the task PIPostInstallProcess.
3. Choose Execute.
A list of the steps to be executed by the wizard is displayed.
4. Choose Install. -
Unable to read software component versions from System Landscape
Dear all,
I have an ECC system with ABAP and Java installed.
I already configured so that SLDCheck, RFC destination configuration run successfully.
PIAPPLUSER is not locked and can logon.
However, when I import software component version in Integration Builder, the system return error message "Unable to read software component versions from System Landscape Directory "Server:50000".
Please tell me how to correct this error.
GiangHi,
Check this
http://****************/Tips/XI/SWComponentError/Resolve.htm
"Unable to read software component versions from System Landscape Directory
Unable to read software component versions from System Landscape Directory
unable to import from SLD
Regards
Seshagiri -
Migrate from XI 3.0 to PI 7.11 software component version question
Hi,
We are migrating from XI 3.0 to PI 7.11. there are about 2000 receiver determination, etc.
We have to assign for every receiver determination, interface determination etc a new software component version.
does anyone know how to do this automaticly.
regards meinhartThe SWVC in receiver determination is not relevant for service interfaces of type "XI 3.0 compatible".
So you can leave the fields emtpy.
The technical background for this SWVC in receiver determination is finding the correct operation for a message.
But XI 3.0 compatible service interfaces have only one operation with same name as the interface. -
Error in Integration Scenario: No software Component version exists
Hi Experts,
We have external product and software component like Product "Project Management" we have imported the CIM content for it
Now when we create an Application Component for the same in Integration Scenario in ESR (PI7.1)
while trying to do right click --> Edit Action it gives Error
"" No imported software component version exists for product"
Also note that it allows us to Add new Action there
that is we can right click --> Add action
Kindly help with your suggestions to resolve this << Moderator message - Everyone's problem is important >>.
Regards,
Jagadish
Edited by: Rob Burbank on Nov 10, 2010 3:56 PMHi Experts,
Tried the steps given in SAP Note: 768148
Still it is not resolved.
I appraiciate if any one suggest some more options to resolve this.
Regards,
Jagadish -
Could not read list of software component versions
Hi,
I am trying to import software components from sld into esr. When i click on display available components i get the error :
Could not read list of software component versions
The details show:
Could not read list of software component versions
from SLD (COULD_NOT_READ_SWCV)
HTTP response code: 403 (Forbidden)
we were initially getting access issue also in details, but that has been rectified by assigning appropriate roles.\
Kindly help.Hi,
Use t-code SLDCHECK on ABAP stack to confirm the connection of XI system and SLD.
Check whether SLD and XI system are on same server. Refer to OSS note - 720717 to integrate XI with other SLD.
In the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
GreatDay,
venkatagiri
Edited by: Giriii on Sep 15, 2011 8:14 AM -
Hi Friends,
I maintained two Namespaces(say Name1, Name2) under a Software Component version.
I developed a scenario under Name2. But i found it wrong. So I deleted all the objects in it like interface objects, mapping objects and also ExchangeFaultData, ExchangeLogData by mistake. Now iam trying to delete the whole namespace from SWCV. But Iam unable to go to the edit mode of SWCV and also iam unable to activate the SWCV.
Please do help me to delete the namespace under the SWCVSorry Typing Mistake.
First Delete all the objects that u have created in that namespace. Once that is done activate the scenario.
After that delete Exchange log, Fault data type. Then go to software component and delete name space. Save the SWC component and then activate the SWC.
Let me know if u face any problem.
If u delete any object by mistake, u can go to change list, select object and say reject change.
-Gouri -
Proxy error- unable to find software component version for namespace-
Hi all,
I need help regarding proxy.
I am using SAP standard package for one integration PI 7.0 to SRM.
Here we need to use the datatype enhancement for adding some fields. So I create one extension_datatype in the datatype enhancement and add the fields .
( I am using Inbount interface, where I am adding the new fields in PI)
Now when I go to SRM system and Run SPROXY system to regenerate the Proxy. So that It can reload the New fields.
Then it reloads and We activate the same.
Now at one place when I clicked the data type enhancement object its giving the error that unable to find software component version for namespace" . I did not understand why its giving the error. I added the new fields in the existing running datatype enhancement. and reload the reproxy.
I have one more datatype enhancement object in the same software component and in the same name space but its not giving the error.
Please help , how to resolve it asap.
regards
ram1.the datatype enhancement object may not be activated in the same software component .
for this try these -
after creating your data types and designing part. First close all the developement objects windows.
then click on your sw component which you have created and activate it very first.
then you will be able to activate all other objects
or when you start activating your data types a new window with list of the objects which you want to activate opens
in this new window you can see your sw component as the very last object select it first and activate it
2. update the cache in both system
i think these 2 reasons.u try it. -
Problem with importing software component versions from SLD to I.R
Hi Guys,
I have some problem in importing my software component versions from SLD to IR. While connecting to SLD it is using the port 50100. Instead of 50000. We are manually correcting it while connecting to SLD. but when we try to import the Software Component Versions from the SLD to IR. It is saying no objects available in 50100. It is not connecting to port 50000. Pls any body help me with some solution. Thanks in advance.
Regard's
Kiran.BIn the Integration Builder page, Click on the Administration and check the following parameters to make sure they are pointing to right SLD system and port.
com.sap.aii.connect.cr.httpport,com.sap.aii.connect.cr.name,com.sap.aii.connect.landscape.httpport,com.sap.aii.connect.landscape.name
Also check with Tcode SLDCHECK too -
Unable to import software component version in IR
Why i can't import software component version in IR by Tools->Transfer from SLD->import software component version?
error message is "Unable to determine dependencies of software component version"
i just create it in SLD before, anything else need to do?
please give me some information, Thanks!Hi Robert,
Please cross check with this blog on how to create a SWCV and import in IR.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
Regards,
Sachin -
Unable to import software component version from sld
hi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regardsHi,
Make sure you have did all the configuration.....
http://help.sap.com/saphelp_nw70/helpdata/EN/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
cheers
Sunil. -
Import of Software Component Versions
Hello.
My problem is in Integration Repository, in Import of Software Component Versions.
Mensagge is:
" Unable to read software component versions from System Landscape Directory ".
I want import software component.!
Help my please.!!!
[email protected]
In tx sm59, result.
Exchange Infrastructure: Test LCR Connection
RFC destination SAPSLDAPI does not exist
=> Create the RFC destination by using transaction SM59!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
RFC destination LCRSAPRFC does not exist
=> Create the RFC destination by using transaction SM59!
Message was edited by:
Claudio LeonIndeed, the instación this incomplete.
It is possible that you indicate to me step by step like making these steps to finish the installation, since I have not been able to finalize and they appear to me new errors.
In SLDCHECK resquest is:
Exchange Infrastructure: Test LCR Connection
Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_UNICODE
gateway host:
plata
gateway service: sapgw00
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
Error when opening an RFC connection
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_UNICODE
gateway host:
gateway service:
Testing the RFC connection to the SLD java client...
RFC ping returned exception with message:
Error when opening an RFC connection
help me.
[email protected]
Maybe you are looking for
-
While installing Adobe Acrobat 8 on Windows 7 Professional, why do I get the messaage "Adobe pdf.dll on Windows Vista CD-ROM is needed"?
-
Permissions needed for user to define workflow variable
Hi all im using a workflow on sharepoint designer 2007, running on list of customer orders. the workflow is trying to use data from customer list. In the workflow i used the "define workflow variable" step on customer order list. the users who are us
-
Three days ago I edited the text of one of the charities web site pages in Iweb. Saved published site changes. However changes didn't show after I visited the site using Chrome. I then saved again and published entire site and visited the site again.
-
Commit changes/edits across DNG library
I'm getting ready to buy new harddrives. I'm also going to be permanantly archiving a large number of photos. How do I ensure that all my DNGs have their edits "hardcoded" to the files and are not soley dependant on the LR catalog DB.
-
Time capsule/time machine set up question
Hi there, I'm getting my new Macbook Pro tomorrow and am going to set up time capsule and have a couple questions on the best way to do it. I want time machine to back up my macbook at a regular interval. I also want it to back up my external hard