Creation of Selections as seen in transaction /SAPAPO/MSDP_FCST2

Hi All,
Could someone remind me how selections are created that can be seen in transaction /SAPAPO/MSDP_FCST2. If you select F4 on the selection field in the Assign Forecst Profile Screen, it will list all of the current slections that are created. I know this is updated when you execute a forcast against a specific cvc, but how can you do a mass update of this... for 10K + cvs?
I though I would be able to do this in a backround job, but it does not seem to work?
Thanks,
Rumi

Hi
You can create a selection from respective 10+ CVCs in the planning book.
These selection will avaiable in the transaction /SAPAPO/MSDP_FCST2. You can select the respective selection and assign the FCST profile which you want for this selection.
While defining a background job , you can define the master FCST profile which has to be used.
Also in control parameters, check the flag Always use job profille
Indicator: Always Use Forecast Profile of the Job
If you wish this forecast profile to be used always with this selection when the forecast is run, check this box. You specify the selection in the mass processing job. Otherwise, the system uses the forecast profiles that have already been assigned to any selection contained in the mass processing job. You can display and change these assignments in the Assign Forecast Profiles transaction (Demand Planning -> Environment -> Assign a Forecast Profile to a Selection).
Dependencies
If you set this indicator, you cannot use the functions that automatically generate and assign forecast profiles, Generate a profile and assign it or Generate new profile on error.
I hope this will give you to fulfill you requirment. Please let us know if you have any more doubts.
Thanks
Amol

Similar Messages

BAPI for Automate direct debit proposal creation for selected customers.

Hello ABAP Gurus,
Requirement is - Changing the process for Automate direct debit proposal creation for selected customers from a custom BDC program to a BAPI.
Explanation -
Currently as per the process, we are using a BDC call transaction program for F110 - Automate direct debit proposal creation for selected customers. The main pupose of this BDC program is to automate F110 Bank Run for A/R (Selected Customers Only). It creates payment proposal which is the first step in order to create payment runs.This program will run in background.
We wanted to change the process from a BDC call transaction process to a BAPI call . In this process I am trying to chase for a valid BAPI in order to sync to my requirement.
It would be appreciate for your << removed >> response.
Thank you.
Regarsd,
Kumar.
Edited by: Rob Burbank on Nov 11, 2009 3:33 PM

Hello gurus,
Is there any implicit or explicit enhancement point for F110 process or is there any alternative for payment proposal creations?
is there any BAPI for F110 functionality?
can you please let me know.
Thank you
Regards,
Kumar.

Use of Freeze Alert in transaction /SAPAPO/AMON1

Hi,
We have button for Freeze Alert in transaction /SAPAPO/AMON1
I want to know what is use of this function.Is it used only for certain alert types?
Thanks,
Lalit

Hello,
Freeze alerts are used to Put alerts on hold with the freeze/unfreeze tool. After a refresh, new alerts are marked with a + and alerts that have disappeared are marked with a -, as compared to the last frozen alert situation.
This is used to Simulate the alerts for creation and view the impact of the alerts created and then can mak the decision to save or to unfreeze the alerts.
Hope the information is helpful
Regards

Error message in transaction /SAPAPO/SCC_TQ1

Hi!
Could you please advise me about nessesary settings for locations.
I maintain Quota Arrangements in transaction /SAPAPO/SCC_TQ1.
While creating Quota Arrangement Item an error occurs:
"The specified partner location PLBP01/ES7032 cannot be quoted"
Message no. /SAPAPO/OO_TR310
For the location, which I input in the field 'Partner location'
So my question is what settings should be made for location in order to make it possible to use it in Quota Arrangement Item?
Thank you in advance,
Kind regards,
Maria Kazakova

The reason could be as simple as the two locations not being connected by a valid t Lane. while constructing QA, did you use the selection icon to select the partner location ?

Missing Button for Favorites in APO Transactions SAPAPO/AMON1

Can anyone help here
I am missing the Favorites button in transaction SAPAPO/AMON1 - Alert Monitor Display. I need to know what object
controls this so I can create a new role and assign access as needed to selected Admin staff who will assign user access to required Favorites for
general users
My login is fine but normal user logins the button is not available which is normal although I need to know what authorisation control this
Thanks

I do not think this is Security Related at all.
Some Software Components (probably the GUI) are not installed on your machine Properly. Please reinstall the FULL SAPGUI. If this does not help also see if any SAP SCM-APO Patches are Incorrectly Installed. In this case you have to check with the Basis Person on the team and together if you cannot figure please raise an OSS to SAP.
Hope this is helpfull in terms of a 'direction' to go for.
Ambrish Mathur

Screen exit for Transaction /SAPAPO/SNP02

Hello Everybody,
Is there any screen exit available for the transaction /SAPAPO/SNP02?
Many thanks in advance.
Best Regards,
Rahul Malani

Hi Rahul - there are no screen exits for /sapapo/snp02. You can however, depending on your version of SCM-APO, use implicit enhancement implementations to add to the selection screen and add logic to use the additional selection criteria. Depending on what you want to do there may be some limitations.
Andy

APO SPP: No Historical Forecast visible in transaction /SAPAPO/SPPFCSTTRACK

Hello
I am trying to view historical forecast data via transaction /SAPAPO/SPPFCSTTRACK in APO SPP. However i get the message "No hist. fcst time series can be determined".
The forecast strategy is correctly assigned to the product & the standard deviation period is populated as 12 months.
The forecast periodicity is months.
When I execute the forecast using planning service manager or interactively, it correctly calculates the forecast in future as well as ex post forecast in the past. I believe the historical forecast is calculated immediately with the forecast run.
Can anyone help to identify if some setting is missed or any specific planning service is required to be executed to enable historical forecasting. Thanks in advance

Hi,
If the transaction /SAPAPO/SPPFCSTTRACK does not provide any information regarding Historical Forecast data (while you have already performed the forecast for the certain location product) then you probably haven't created a new forecast with a different model. For example, if you created the first forecast with Moving Average then you need to change the Forecast Strategy to an another one (or run Automatic Model Selection which should also select a different strategy). In case when the new Forecast Strategy differs to the previous one, then the appropriate trigger (SPP_FCSTMODEL_CHANGE) will be created for recalculation of the Historical Forecast. Of course, if the trigger is created, you also need to run a PSM service for the recalculation which should be configured for the location product you need to process.
(You can find more information regarding this [here|http://help.sap.com/saphelp_scm50/helpdata/en/43/300e47bd9e2227e10000000a422035/frameset.htm].)
Best Regards,
Zsolt
Edited by: Zsolt Csoka on Jul 14, 2011 11:06 AM

Product View: BADI/user-exit at "SAVING" for transaction /SAPAPO/RRP3

Hi to All,
i need to insert my custom routine BEFORE saving for transaction /SAPAPO/RRP3.
I should display an error message that stop the saving.
Does some BADI or user-exit exist for my requirement?
Best Regards,
Alessia Bassano.
Edited by: Umberto Panico on Mar 19, 2009 10:07 AM

hi
/SAPAPO/RRP_EXPLODE BAdI for the Explosion of Orders
/SAPAPO/RRP_IO_COL BAdI: Enhancement of the Order View
/SAPAPO/RRP_ORD_CONV Enhanced Check for the Convertibility of an Order
depends on your requirement you can select anyone of the above BADi's.
if not try to use enhancement points.
Rgds.

Use of APO transaction /sapapo/tsobj

I have a question about the use of APO transaction /sapapo/tsobj - for the transport of planning areas and planning books.
As far as I can see, this transaction can be used to first transport planning areas, and then transport planning books.
Can one also use the transaction to transport planning areas and books in one go?
Thanks,
Bob Austin, Atos Origin

absolutely
you can transport planning areas, planning objects, planning books, data views, selection ids and mass processing jobs as well in one shot.

HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?

HI,
HOW TO PASS THE DATA FROM SELECTION SCREEN TO STANDARD TRANSACTION?
thanks,
samba.

By selection screen, what do you mean? There is no selection screen in WDA as there was in classic dynpro. Do you mean you are using the Select-Options reusable component? Are you wanting to call a standard transaction via ITS - SAPGUI for HTML? Please provide more details to your question.

BADI / User Exit for APO Order transaction /SAPAPO/SNPTLB

Hi Experts,
We have a proxy interface and currently we are using FUNCTION EXIT_SAPMSNPUSER_006 for the APO Order transaction: /SAPAPO/SNPTLB.
This exist is triggering before the Order is being saved in APO and at times it is throwing an error 'Order key already exists in live cache' in the APO system.
Is there any other BADI or User exit available to Save the order in APO before the interface gets processed?, if so, plese guide me.
Thanks & Regards,
Vijaya

Hello Lakshmi,
I am having the same issue with the message "Order key already exists in live cache" in our system.
We are using the user-exit EXIT_SAPMSNPUSER_005 for UoM conversion. But we are not making any explicit proxy calls
to /SAPAPO/SNPTLB. Does the system automatically call this transaction with this user-exit?
Did you get a resolution for the issue. I would really appreciate if you can let me know how you have addressed this.
Thanks,
Ratnam

BADI/User Exit for APO Transaction: /SAPAPO/SNPTLB

Hi Experts,
We have a proxy interface and currently we are using FUNCTION EXIT_SAPMSNPUSER_006 for the APO Order transaction: /SAPAPO/SNPTLB.
This exist is triggering before the Order is being saved in APO and at times it is throwing an error 'Order key already exists in live cache' in the APO system.
Is there any other BADI or User exit available to Save the order in APO before the interface gets processed?, if so, plese guide me.
Thanks & Regards,
Vijaya

Hello Lakshmi,
I am having the same issue with the message "Order key already exists in live cache" in our system.
We are using the user-exit EXIT_SAPMSNPUSER_005 for UoM conversion. But we are not making any explicit proxy calls
to /SAPAPO/SNPTLB. Does the system automatically call this transaction with this user-exit?
Did you get a resolution for the issue. I would really appreciate if you can let me know how you have addressed this.
Thanks,
Ratnam

Unable to check the PDS in transaction /sapapo/curto_simu

Hello Experts,
I am using BAPI 'BAPI_PDSSRVAPS_SAVEMULTI' to create the PDS, i can see the pds getting created in /sapapo/trprod and as well i am able to get the PDS details through 'BAPI_PDSSRVAPS_GETLIST',
But using Transaction '/sapapo/curto_simu' i am unable to get any results for the product.
don't know why?
Thanks
Surbhi

Hi Gemini,
In se37 transaction in the input field, i have entered the 'BAPI_QUOTATION_CREATEFROMDATA2' and clicked on the button ' DISPLAY',but in the status bar i am getting the messsage as 'PROCESSING CANCELLED'.
I think in some transaction something has to be done,so that this can be viewd in SE£7 tcode.
Regards,
Xavier.P

How to do screen enhancement in the selection screen of CS15 transaction

Hi friends,
I have a unique requirement where I have to do screen enhancement in the selection screen of CS15 transaction to get the top level material,
Can you please tell how this could be achieved ?
Looking forward your valuable inputs.
Thank You.
Regards,
S Sadhya

Hi,
This can be achieved by using user-exit. Specifically screen-exit. Check these two exits related to transaction CS15. They may be helpful to you.

PCSD0002 BOMs: Customer fields in item
PCSD0003 BOMs: Customer fields in header

Let me know if you need any other information.
Regards,
RS

How to add Material type(MTART) field on Selection screen of MB5B transaction code.

Hi All,
    Please let me know how to add material type field on selection screen of MB5B transaction
For that i made copy ZMB5B_COPY of original report RM07MLBD.
Thanks in adv .
Samadhan

Hi,
Once you copied the standard report to Z report, you can MTART in selection screen like below.
and in order to inlcude the same in programming logic, we have three option.
1) Check all related select queries, and include MTART in SELECT query using inner join with MARA.
2) In START-OF-SELECTION event fill MATNR as shown below.
3) If user entered any value in MTART, then before displaying the report just check material type of each material in the final internal table(which is used to display report) delete enteries from internal table accordingly.
START-OF-SELECTION.
IF MTART[] IS NOT INITIAL AND MATNR[] IS INITIAL.
    SELECT MATNR FROM MARA INTO MATNR-LOW WHERE MTART IN MTART.
      MATNR-OPTION = 'EQ'.
      MATNR-SIGN = 'I'.
      APPEND MATNR.
      CLEAR MATNR.
    ENDSELECT.
ENDIF.
The above option has one limitation: The selection screen variables has some restriction, please read the below thread.
Facing problem in select statement dump DBIF_RSQL_INVALID_RSQL CX_SY_OPEN_S
Getting Dump in the select query has more than 2000 entries
Hope this will work for you .
regards,
Rajesh Sadula.

Creation of Selections as seen in transaction /SAPAPO/MSDP_FCST2

Similar Messages

Maybe you are looking for