Creation of solution is not possible in Solution_manager

I have connected the development system in SMSY Tcode.But i am unable to create solution in Solution_manager Tcode .I have tried to create new solution but it is not moving to next screen to create solution .Whether i have to apply any support package (OR) configuration
My solutionmanager version is 4.0
Thanks in advance
Thanks & Regards
Balasubramaniam.D

Hey Bala,
Apply note 1008717 - HTMLViewer: Postdata of length more than 255 gets truncated.
This should solve your problem,
Reward for usefull answer..
Regards,
Anand....

Similar Messages

Moved: Creation of new iViews not possible because templates missing

Hello,
sorry I moved this issue to "Portal Content Development"
Creation of new iViews not possible because templates missing
Regards
Alex
Message was edited by:
Alexander Lepka

Alex,
I'd be curious to know what SAP says. We have the same problem. Not sure how/if we broke it, but we can no longer create iviews using the wizard. I opened an OSS msg a while ago, but did not get much assistance.
We have recently upgraded to 2004s and it did not resolve the issue as I hoped it would.
If SAP provides a solution for you, please post it.
Thanks,
Shelly

Authorization creation by ODS((0TCA_DS01) not possible on PRD system

Hi friends,
I am setting the authorization values by using ODS(0TCA_DS01)(uploading file data to the ODS and then creating it via RSSM). But it is not possible on PRD system on which system is set as "No change to repository cross-client customizing objects".
Are there good solution to set the authorization values by ODS method on PRD system?
Kind regards,
Masaaki

Go to /nsu53 and see if u have no authorization in PRO then go to DEV assign authorization & then transport the same to Production.

Creation of new iViews not possible because templates missing

Hello,
I do troubleshooting to this problem but still didn't found a solution. Before this problem came up an creation of iViews were possible. I'm not able to reproduce what was changed since then.
I'm using an NW04s Portal SP09:
If I try to create a new iView I get no selection of different iView templates. The step 1 of Template selection shows the message:
"No templates to display. You are not assigned to any existing templates."
I checked the template folder in PCD and found my role has access to it and to the templates objects. I gave me super_admin role but nothing changed. I think the problem is maybe a configuration issue or something with wrong access rights (security zones?).
Please, do someone know what I could check next?
Thank you very much for every response.
Regards
Alex

Alex,
I'd be curious to know what SAP says. We have the same problem. Not sure how/if we broke it, but we can no longer create iviews using the wizard. I opened an OSS msg a while ago, but did not get much assistance.
We have recently upgraded to 2004s and it did not resolve the issue as I hoped it would.
If SAP provides a solution for you, please post it.
Thanks,
Shelly

Creation of an endpoint not possible in NW 7.0, SP14

Hi,
I created an RFC function module in the ABAP backend (NW 7.0) and created a service out of that (inside out).
For publishing and configuring endpoints you have to use the new transaction SOAMANAGER as of SP14.
So, I tried to follow the instructions but get stuck when I try to create a service endpoint.
The SOAMANAGER does find my service definition. It is shown in search results. When I click into the configurations tab of the details there is no selection possible.
So, I am not quite clear what am I missing here.
Has anybody had a similar problem and a solution for it?
Thanks,
Michael

Hi Michael Kretz ,
Have you activated the service which u have created?Please it and try once again.
Regards,
Sudha S.

Return Order Creation with Multiple Lines not possible - EHP3

Hi Experts,
We are facing an issue while creating Return Orders with external reference billing document post upgrade from CRM 7.0 to EHP3.
While we select multiple line items from the external reference billing document and Create a return order(BT120H_CPL/NewComplEF ), the very first line item gets repeated instead of all the line items getting copied to the subsequent view(BT120H_CPL/ItemList ).
Please help.
Thanks,
Rohit

I hope you have tried.If not can you please try with below qualifier
'015' Billing Document Number of Invoicing Party
Provide the billing document EEDK02-BELNR.
Also give qualifier at item level
E1EDP02 : use Qualifier =15
Provide the Billing document number at E1EDP02_BELNR and item at ZEILE.
I am not sure what is error you are getting when you are referencing billing document.If something STD Idoc is not working as you expected use your custom logic to bring the data when you are posting the Idoc.
I have not worked on sales order process,But I have worked on Purchase Order creation process.
Please let me know the error ,If i know the error i will defiantly help you.

Automatic creation of Purchase order not possible for 103 mvt type

Hi,
If i could configure "create p.o automatically", while doing G.R for mvt type 101,
why cannot i do the same with 103 mvt type.
I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
Which entry controls the above my requirement?
Please advise .
Thank you.

Hi,
These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

Return Order Creation with Multiple Lines not possible - 7.0 to EHP3

Hi Experts,
We are facing an issue while creating Return Orders with external reference billing document post upgrade from CRM 7.0 to EHP3.
While we select multiple line items from the external reference billing document and Create a return order, the very first line item gets repeated instead of all the line items getting copied to the subsequent view(BT120H_CPL/ItemList ).
Please help.
Thanks,
Rohit

>>. But is it possible in PI 7.0?
Just few cents..
Test using SOAPUI or XMLSPY and use that same WSDL URL in the target URL of Communication channel. Just to make sure you use the right endpoint.
or
You can specify the method name as soap action dynamically using udf in mapping and see how it behaves.

Error:-document is in transfer for purchase order..creation is not possible

Hello,
While doing confirmation of PO I am getting this error, saying "document is in transfer for purchase order..creation is not possible".
can anyone please suggest me solution on this type of error?

Hi,
Is the PO in ORDERED status? Is there any confirmation posted for this PO which might be stuck (idoc failed to reach back end)?
If it is a case of idoc failure, then reprocess the idoc and then do the next confirmation.
regards,
MRao

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

Document is in transfer for PO, creation not possible

Hi
We are using SRM 4.0 EC scenario. Recently we have been facing the subjected error 'Document is in transfer for PO, creation not possible' while making the confirmation in SRM. It is observed that this is happening mostly in case once we make GR and cancel and repost. Thru some other thread posted in forum, came to know taht we need to delete the entries in table "BBP_DOCUMENT_TAB" via FM ''BBP_DELETE_FROM_DOCUMENT_TAB''. I ran thei FM but found NO poitive results. Hope somebody can help me out. This error became very common in our production system
Thanks
Kiran

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

GR Error: Document is in transfer for PO, Creation not possible

Hi Experts,
While posting a GR for PO, following error is being encountered,
'Document is in transfer for PO, Creation not possible'.
I checked the PR - PO. There are multiple GRs for the PO and all earlier GRs are posted successfully.
For posting a new GR this error is coming.
Any pointers?
Thanks in advance.
-Dhananjay

Hi Kiran,
Please, use the report CLEAN_REQREQ_UP to clear the entry made for the GR in BBP_DOCUMENT_TAB. The problem comes because there is an entry for the GR in the table probably from the previous creation.
Regards
Saravanan.
Please award if useful

Error Message: Creation of Temporary Table "#BIMC_SETS" not possible

Hello,
I am trying to get data from HANA Virtual Data Model (VDM) from MDX connection in MS Excel. The VDM Views and models are visitble after the connection is successfully made.
But when I try to fetch the data, I get the following error:
"Creation of Temporary Table "BIMC_SETS" is not possible".
Can someone let me know how to resolve this?
Best regards,
Akhil

Hi Lars,
I am getting the same error. We are trying to build a role for Adhoc reporting. The role has analytic privilege, object privilege with select on individual models in _SYS_BIC (models we want to expose and part of AP), object privilege on _SYS_BI with select and execute and also object privilege execute on REPOSITORY_REST.
I am able to execute the models using Lumira and Analysis for excel, however getting error with MDX connection.
Also we want to try and restrict direct ODBC access to HANA using query from excel. With the above privileges user is able to see all the M_ views and get data for it. Can we restrict this?
We are on SP6 rev 67.
Thanks,
Aamod

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions?

Adobe Acrobate XI and SecCommerce SecSigner have a problem during signing of a document, creating/verification of the signature is not possible - solutions? SecSigner is not responding.

Well, I contacted SecCommerce about the issue, the response was, that I should sign the file later (afterwards). This is a solution, but not the best in my opinion.
When I sign the document the SecSigner window/Java window appears and freezes. Adobe is not responding. I have to terminate Adobe because the program is not responding.
I only found this support website, so I have realized that this is a User 2 User site, but it was a try to get some help.

Document is in transfer for purchase order.Creation not possible

Dear All,
We did partial confirmation in EBP and later when trying to do confiramtion for the remaining quantiy getting the message"document is in transfer for purchase order.Creation not possible"
We are taking this problem in production as well as in quality systems also.
What are possible reason and how to solve it.
kindly share your views.
Thank you.

Hi yshu,
use tcode bd87 in SRM to check for failed confirmation IDOC (type MBGMCR).
The double click the status record to see the exact cause of the failure.
Rectify the error. Then try to execute the IDOC from BD87 tcode.
For a few errors you may not be able to execute the IDOC but to create a new confirmation in SRM. In such cases, follow the below procedure..
There should be an entry for the confirmation in the transfer table BBP_DOCUMENT_TAB in SRM. Display the details.
Then run FM "BBP_DELETE_FROM_DOCUMENT_TAB" to delete the entry from the doc tab table.
Then post a new confirmation in SRM.
There is also a FM in SRM using which you can change the status of thefailed IDOC from 51 to 68 or 31.
Rgds,
MJ

Creation of solution is not possible in Solution_manager

Similar Messages

Maybe you are looking for