Creation of Source System

Dear all,
  i am new to BI 7.0. can you help me how to create source system.

Hi,
You can actually create many type of source systems depending on your business requirements.
Go to RSA1 transaction in BI.
choose Source system. Depending on the type of system you require, right click and choose create.
then you have to follow the procedure it says.
As in case of SAP source sytem you have to give the R/3 system name/ID etc and user name/password to connect to and from R/3 system.
For this you have to maintain RFC destination to communicate to and from R/3 system to BI system. Then it will login to the R/3 system and will comeback to BI and start transferring matadata and BI contents  from R/3, choose without dialog option when it ask you otherwise it will ask you every time it will transfer new object.
Assign points if it helps..........

Similar Messages

  • Error in creation of source system

    Hi Experts,
    We are facing a problem while creation of source system. We are getting an error "You have no authorization for basic types (activity 03)" Kindly help me to resolve this issue.
    Regards,
    Jitendra

    Hi there,
    if you get the error again, please go tcode su53 directly and see for which object the authorization is missing. I understand you have SAP_ALL access but for any authorization issue we normally go to SU53 tcode and verfiy.
    So once you get the object name then go to SU01 and open your id. Go to authorization tab and find for that object and see if '03' activity is assigned to you or not.
    If this step is absolutely fine then we can think of alternative solution.
    Regards,
    Anup

  • Creation of Source System(R/3)

    Hi,
      I'm trying to create R/3 source system in BW(RSA1->Source system->Create) but it fails to create.
    I have created RFC Destination on both BW & R/3 systems.
    I tested them for 1) Test connection 2)Remote connection.
    Sucessfully able to remotely login to each other systems.
    But when i create from RSA1 its failing.
    Any help please ?????????
    Regards
    prabhakar

    Prabhakar,
        while creating the Source System, <b>if you right click on source system and go with check</b>...it will give you the error. if you click on Question Mark or Help Ocon. it will what you need to do in order to get rid of this problem.
    you need to create a entry in the <b>RSADMIN</b> table. check for RSA1> tools> there is an option that will update the table RSADMIN.
    In furture, if you come accross any such problems with Source system... go with check.
    all the best.
    Regards,
    Nagesh Ganisetti.

  • Creation of Source system in BI Server

    Hi,
    I want to Send Export DS from source BI server to
    target BI server.
    So I need to create one Source system in Target BI
    server.
    Can anybody tell me the procedure for creating
    this?
    Thanks in advance.
    Rgds
    Biswarup

    Hi,
    I have checked RFC connection is there ( Sm59 ).
    I want to know how I will create Source system in Target system in RSA1.
    Rgds,
    Biswarup

  • Creation of source systems

    Hi All,
    Please tell me how to create the source system on database views connected through the DB connect.
    Thanks
    Lalitha

    hi,
    DB connect
    http://help.sap.com/saphelp_nw2004s/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
    Connection between Source Systems and BW
    http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
    Creating SAP Source Systems
    http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
    BW connectivity(.doc)
    http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
    Configurations in the SAP Source System
    http://help.sap.com/saphelp_nw2004s/helpdata/en/27/8d8342a7d30d53e10000000a155106/frameset.htm
    Creating SAP Source Systems 
    http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
    Ramesh

  • Probelm in creating R/3 source system in BW 3.5!

    Hi,
    steps i did for the creation of source system in BW are as follows!
    1) crated RFC destinations in each of the system (BW3.5 and R/3 4.7 IDES)
    2) created logical systems in each of the systems and assigned the client to the respective logical systems
    3) created back ground user in BW (Back ground user was already there in BW side, namely ALEREMOTE)
      4) and in RSA1 screen when i attempt to create source system, it is asking for RFC destination and Logical system which i did . and after that, i am seeing neither the source name created nor any other next screen .
    am i missing some thing here?
    do suggest me the steps furthur for creating source system
    Thanks,
    Ravi

    Hi Dinesh,
    Thanks for ur reply!
    now i did just as u told to me to do in automatic creation of source system!
    i am getting the following info on the pop up window :
    BW LS1 is already known T90CLNT090 in the source system
    do you want to delete this connection in source system?
    connection is restored after it has been  deleted successfully
    which option shud i use delete or dont delete?
    if i am selecting "don`t delete" option  iam getting the message as source system cannot be created with any of the proposed connections!
    and i donno what wud be the effect if i select delete option!
    pls suggest me on this !

  • Source system icons changes when connecting SAP BW to mySAP ERP 2004

    Hi,
    Just an Interesting observation in relation to the creation of source systems in SAP BW to SAP Web AS 6.40 based systems (mySAP ERP 2004, mySAP SRM, etc).
    I thought it would be interesting to share!
    The behavior is logical but can be a surprise for a BW administrator who is not aware of the new internal SAP BW systems within mySAP ERP 2004.
    Scenario:
    The customer was connecting a stand-alone BW system to two new systems with latest and greatest mySAP ERP 2004 (ECC 5.00) and mySAP SRM.
    Observation:
    In the past the SAP R/3 source system would be created with a "SAP R/3 icon" indicating a SAP Source system.
    <b>As of mySAP ERP 2004, the source systems will be created in the SAP BW standalone system with the "SAP BW System icon".</b>
    Note: This is also the same behavior for new releases of mySAP SRM, and other SAP applications that are <u>based on SAP Web AS 6.40 or greater</u>
    Why?:
    The standalone SAP BW system is connecting to a system that contains an internal SAP BW system. The standalone SAP BW system determines that it is possible to extract <u>both</u> from the internal BW System <b>and</b> from the Plug-in extractors. It simply denotes that this source system is a SAP BW system and uses the BW Source system icon. (Remember SAP BW is client independent*!).
    Note: This behavior will still occur even if you do not use the internal SAP BW system within mySAP ERP! It is there whether you use it or not.
    Second Note: You can still use the ERP Content extractors from the mySAP ERP Source System as you did in prior releases.
    Another related observation:
    I would expect that this case will probably be true even if you only use the internal SAP BW.
    Scenario: You use the internal SAP BW in another client in the mySAP ERP system than your ERP processing.
    Result: The connection between the BW client and the ERP client source system(s) (i.e. client 001 for ERP, client 100 for BW), both the 'myself' and ERP client source systems, will show up as BW source systems!
    Source system 001 and source system 100 will be displayed as SAP BW icons because SAP BW is client independent*
    user master and authorizations are client dependent
    I hope this was interesting.
    Cheers,
    Mike.

    Hello,
    I used my user id to login. I recieved a message :
    User already exists in source system  I continue:
    Anothre window pops up : "Check  RFC connection" and it asks
    'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
    Here I select Use - but i get an error : Error in source system'.
    how can i track down this error.
    Kindly inform.
    Regards,
    Nikekab

  • Problem in R/3 Source System

    Hi,
    I requested basis Guy to create R/3 Source system.
    He created, But when I want to Replicate the Data sources,
    When I double click the R/3 Source System
    I will get this Messege
    " <b>There is no application component hierarchy
       in BW for source system &1.
       Load application component hierarchy from the source system now?</b> "
    I won't get the Hierarchy and I won't see any Data sources here?
    what is the problem?
    Even My basis Gye says , R/3 Source System working Fine , he says I need to do some configuration.
    Please Help me
    Thanks
    Priya

    Hi Eugene,
    I previously selected OK button, but i couldn't get the Data sources Hierarchy?
    what is the problem?
    i am using ECC.5.0.
    I selected the Source system Right click then I selected CHECK, i received the message
    Source system connection  OK.
    if source system connection is good why don't i get the data sources?
    Basis Guy selected Below option to create Source System
    <b>SAP System From Release 3.0E (Automatic Creation)</b>
    Source System Icon also looking different, In previous 3.XX  we can see the Icon R/3,
    but here R/3 Icon is not displayed.
    I need to do any configuration for getting datasources?
    please help me
    Thanks
    Priya

  • Rsa1 source system deactivation

    hello ,
    When i was working on rsa1 after creation of source system i right click the source system and pressed "RESTORE" but the object displayed deactivated symbol and trying to activate it but it still remain de activated
    please can any one tell me the solution to the problm
    on check it gives following error:
    "Source system <name> is inactive" ID RSAR
    Thank you in advance.

    Hello,
    Please check your RFC destination whether the source system already exists.
    In the source system creation you assign the IP address instead of source system name. Please go through the screens (SM59).
    If you have not used IP address you can ignore it.
    Thanks
    Chandran
    Edited by: Chandran Ganesan on Nov 13, 2008 2:30 PM

  • Message "Creation of DataSources for SAP source system is not permitted"

    Hi,
    I am in DW Workbench: Modeling and I need to copy a DataSource.
    It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
    What can I do?
    Thks

    Hii.
    You can not copy the standard datasource to any other source system it will not allow you to do that.
    But if you want to copy you can copy it to PC FILE source system.
    It will allow you to copy there.
    Right click in Datasource->Copy-> Give Target datasource name -
    > intarget Source system tab -
    >Give Source system for File.
    Thanks
    Mayank
    Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

  • Creation of System Alias between Portal and E Sourcing System

    Hi Team,
    I would like to create a System Alias between SAP Portal 7.4 and E Sourcing System 10.0. I would like to know during the creation of System Object which template i need to take (is it http System or R/3 System using Load Balancing).
    If it is a HTTP System, I am getting  ""Could not find Connector Factory value: null"".
    Could you please help me in knowing what could be the issue.
    Pls. Note: E Sourcing is a Java based SAP System.

    Hi Sankar,
    Please go through the below SAP Note and see if that helps.
    711769 - SSO between SAP Java Software Products
    BR,
    Anurag

  • Creation of R/3 source system

    hi
    i have problem with creation of R/3 source system in BI 7.0 like
    1.creation of logical system for R/3 client
    2.creation of logical system for BI client
    3.naming of background users
    4.creation of R/3 source system in BI.
    if any body have the solution pls post it.
    regards
    venkat

    Hi,
    Taka e look also these.
    Connection between Source Systems and BW
    http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
    Creating SAP Source Systems
    http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
    BW connectivity(.doc)
    http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
    Regards.

  • Source system creation

    hi experts,
    this is the first time i am creating source system
    i am have requirement to load data one bw system to another bi system,
    so, to do that i defined and created logical system in bw for bi system and
    i created same for bw in bi system also and everything is ok.
    i guess my next step is to create source system(my self) for bw in bi .
    when i am trying to create it is showing that it is already exists.and here what type of source system i need to choose. i am not founding any my self bw data mart
    status symbol under  source system creation node and what type of the source system i need to choose and whether it is manually or automatically.if i choose automatically it is asking create new destination ,create back ground user and connection of source system to bw (it is asking to fill all fields),for manual system creation only logical system and rfc destination. is it required to creat source system or not because my self bw data mart symbol is present in bw system and bi system also.please correct me if anything wrong
    thanks
    venu

    hi chandra shekhar &chitrat,
    thanks for your quick reply,when i choose sap business information symbol
    it is asking to fill all the entries like crate new destination under this i provided
    target computer in this i provided ip address of bi system( i am creating in bw system),system id & system number,and  back groung user in source system and
    password ,connection to the source system ,target system for back ground user
    and connection to the source system what i need to provide
    thanks
    venu

  • Source System creation in BI 7.0 for SQL Server using DB Connect

    Hi
    My requirement  is to extract data from SQL Server 2005 to BI 7.0 using DB Connect.
    I need to create a SOURCE SYSTEM for that purpose,As i am new to BW i don't know how to start to create a  SOURCE SYSTEM.
    What are the parameters i require either from Basis team to install or for DB team User ID in SQL (What type of user).
    Questions:
    1)  create a db user with authorization to read this views.......as i created views on tables...do i need authorisation to read table or views
    "On BW Server side (If BW server isn't based on SQL Server):
    (1) Install SQL Server client and test connection to SQL Server DB.
    (2) Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel)"
    How can i know on which server our BW System is Based and HOW Install SQL Server client and test connection to SQL Server DB and
    Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel
    and
    how to create Source System to SQL Server on BW
    Please update me in details i this is my first Source System Creation in BW
    Thanks in advance

    go through the link this may be helpful                  http://msdn.microsoft.com/en-us/library/dd299430.aspx

  • Error while source system creation/Source system transport

    Hi,
         In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
         Since we can’t create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
         I have two queries.
    1.  Is this way is correct for creating the Source System for BW Production system?
    2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
    Error in source system GWPCLNT900
         Message no. RSAR502
    Diagnosis
         With Remote Function Call to system GWPCLNT900 error connection closed
         (no data)  ccurred.
    Procedure
         Remove the cause of the error.
    When tried again I got the following error message
    Basic type ZSBB030 doesn’t exist. EA 447
    Result of the destination check: Timeout RSAR 375.
    Could anyone throw some light on these errors?
    Thanks in advance.
    Krishna

    Hi,
    you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
    In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
    The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
    Please look at best practice documents on a more step-by-step guide...
    Best regards,
    Christian Frier

Maybe you are looking for