Creation of system object for customized workflow
Hi Experts,
I am required to define a System Object with system alias, for creation of UWL to trigger Customized work flow's.
What WAS properties and Connection Properties and ITS Properties i should maintain in newly created System Object?
how do create UWL so that it triggers Customized workflow instead of standard workflow in R/3?
I have similarly total 3 Customized workflow so do i need to create three UWL's for each one?
Please help me out!
Regards,
Siva
Hi Shabir,
I am new to EP can you please let me know how to create custom connector? that triggers three custom developed workflow?
and Please let me know what parameters to pass to create system object(like WAS Properties, ITS Properties etc)
Thanks in advance!
Regards,
Siva
Similar Messages
-
Problem in creation of system alias for bw system
Hi,
I want to create system alias for the bw system
system admin->sys Config->system landscape->portal content->my own folder
for this folder i created the system object
after creation of system object, from property category i select the connector and give the details.
after that i select the user management and give
authentication ticket - select
Logon method- UIDPW
User Management type- admin,user
i saved till now
in the display object i select the system alias
then that screen displays
In the system alias screen, i clicked on add button for adding alias then we r getting this message.
User Mapping Status: (Not ready for user mapping configuration)
Please give the solution for solving this problem
Regards,
Sid.
Edited by: sid m on Mar 11, 2008 12:15 PMHi Krishna,
I checked the connection settings.
WAS settings in system object is giving this mistake
before user mapping it works fine.
after giving usermapping i ma getting this exception.
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (172.19.18.75)
5. HTTP/S connection failed
for testing the connector i am getting this exception
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Regards,
Sid. -
Could not retrieve System Object for the alias.
Hi all,
I have installed a business package (Maintenance Technician) and created system SAP_PM with aliases SAP_ECC_Manufacturing, and SAP_ECC_Common. When I am logged into portal using Super Admin role, all the iviews of business package are working fine. But when I am logged in using normal user, all iviews in the business packages are throwing the following exception. Any ideas why? I appreciate your input.
<b>Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_ECC_Manufacturing', System ID: 'pcd:portal_content/com.xyz.fl_systems/com.xyz.SAP_PM'. User: 'abcuser',
Reason: Access denied (Object(s): portal_content/com.xyz.fl_systems/com.xyz.SAP_PM).</b>
Thanks
Vicky R.Hi Vicky,
can u pls share ur experience how did u solve this problem, i too facing the same problem.
what i did created one user who is already existed in BI System and created few iviews related to BI Reports.
when i logged in through that user id in portal , while executing system is throughing the error what u have faced.
Could u please let me know how did u solve that problem.
Thanks in Advance
RamanaRao V -
System Object For BI In Visual Composer
Dear portal Gurus,
I have some rfc's in BI server and i want them to access in Visual Composer,so i created a R3 dedicated server system object for that BI server but when i'm entering that value of the RFC it is unable to access ,so is that we should create a load balancing system object for that BI server,
Plz Help me
Thanks and Regards,
sathya.are you able to see your rfc in the drop down list in the models section?
Also do check in your portal system object if SAP System type is SAP_BW.
Hope this helped you. -
Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation
Hi,
We have customized Quote Approval Workflow (ASOAPPRV) XXXASOAPPRV, would like to understand how to setup that custom workflow XXXASOAPPRV will be triggered for Quote Approval process, when we submit the Quote for approval from Quotes screen.
Appreciate your help on this.
Regards,
RamPl see your duplicate post here - Quote Approval Workflow (ASOAPPRV) setup for customized workflow initiation
Srini -
UWL modification for Custom Workflow
Hello ,
We are implementing Expense Approval on EP7.0 via UWL....there is a custom workflow in the ECC system which was being used earlier in ITS....we want the same Inbox entries on portal and give managers the option to Approve from there....they are able to Approve .....but the "Approve with Changes" button is not working ....it just says "Successful" at the top but does not actually approve it ....do we need to make changes in the UWL XML file for this...?
Any help would be highly appreciated.Hi Saurabh,
try to add your custom attribute in your view com.sap.pct.erp.mss.myOpenTasksTimeAp how <DisplayAttributes>.
Example:
<View name=...........
<DisplayAttributes>
<DisplayAttribute name="REQ_ID" type="string" width="" sortable="yes" format="default" referenceBundle="decision" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
<DisplayAttribute name="VERS_NO" type="string" width="" sortable="yes" format="default" referenceBundle="decision" hAlign="LEFT" vAlign="BASELINE" maxTextWidth="0" headerVisible="yes"/>
</DisplayAttributes>
Change the type and the other property of displayattribute as you want.
Regards,
Rocco
Edited by: Rocco P. on Oct 20, 2011 10:39 AM -
Event Linkage for custom Workflow and Custom BO
Hi Friends,
I have created one Custom Module Pool, Business Object and Workflow Definition. In Business Object I have created one Business Event and the event is triggered from Custom Module Pool using function module SWE_EVENT_CREATE. I have created event linkage in transaction SWETYPV and receiver type given Workflow Template No: (WS*) and receiver function Module SWW_WI_CREATE_VIA_EVENT_IBF and checked Event Linkage Active checkbox. Finally I have activated the Triggering Event in the Workflow basic data section. But the Workflow is not getting triggered. Can anyone of you give me a solution for this or tell whether i missed any of the setting for the workflow?
Regards
SujithHi Sujith,
Did you include a commit work statement after the call to SWE_EVENT_CREATE?
Regards
Gareth -
Error while creating a system object for R3 in portal
Hi,
I am getting error while trying to create a system object in portal.
Following are the details I used :
Under WAS...
Web AS Host Name :<XXXX>:8001
Web AS path: /sap/bc/bsp/sap/
Web AS protocol : http
Under User management:
Authentication Ticket Type : SAP Logon Ticket
Logon Method :SAPLOGONTICKET
User Mapping Type : admin,user
Under Connector:
SAP Client : <Client NO>
SAP System ID : <System ID>
SAP System No : <System No>
System Type : SAP_R3
While trying with connection test... I am getting like this:
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (<FQDN server name>:8001)
5. The host name <FQDN Server Name> was resolved successfully.
6. The server sapdwh01 could not be pinged successfully.
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
It seems that the portal is not able to ping to R3 system. I tried to ping to R3 server from portal server by command prompt. I am able to ping. Also under SICF, I can see ping service as in activated state.
Kindly help.
Regards,
Niraj
Edited by: Niraj Kumar on Dec 11, 2008 10:41 AMI created a SAP Transactional iView for transaction SE80.
Also, I tried from under System Administration -> Support -> SAP Transaction. It is not working.
Got portal Runtime error :
Portal Runtime Error
An exception occurred while processing your request
Exception id: 12:57_11/12/08_0003_2795650
See the details for the exception ID in the log file.
Regards,
Niraj -
Error in multiple operation with change document object for custom table
hi all,
I have developed a change document object for a custom table ZTEST and developed a report program for insertion, updation & deletion..everything works fine if I do only once ie. if I created only 1 entries. If I created 2 new entries , I am getting an Error "DUPREC:POS&Z3RL_TAB&Z3RL_TAB" and EXIT the transaction.
why I am getting this error??? is it not possible to do multiple operation with the change document???
kindly help.
Edited by: JaiKarthik on Apr 7, 2010 6:20 AMLOOP AT ts_mod INTO wa_mod.
READ TABLE <i_itab> INTO <wa_tab> INDEX wa_mod-row.
* Select the existing entries in table Z3RL for change history
SELECT SINGLE * FROM z3rl
INTO wa_z3rl
WHERE vkorg = <wa_tab>+3(4)
AND zzkunnr = <wa_tab>+7(10).
* Move the old entries
IF sy-subrc = 0.
CLEAR ls_z3rl.
ls_z3rl = wa_z3rl.
ENDIF.
* Update the table
MODIFY (viewname) FROM <wa_tab>.
CLEAR wa_z3rl.
wa_z3rl-mandt = <wa_tab>+0(3).
wa_z3rl-vkorg = <wa_tab>+3(4).
wa_z3rl-zzkunnr = <wa_tab>+7(10).
* Populate change tables
CLEAR wa_change.
wa_change-teilobjid = 'Z3RL'.
wa_change-textart = 'TEST_2'.
wa_change-textspr = 'EN'.
wa_change-updkz = 'U'.
APPEND wa_change TO ts_change.
*call the fM to log the values in CDHDR table.
CALL FUNCTION 'Z3RL_WRITE_DOCUMENT'
EXPORTING
objectid = 'Z3RL'
tcode = sy-tcode
utime = sy-uzeit
udate = sy-datum
username = sy-uname
planned_change_number = ' '
object_change_indicator = 'U'
planned_or_real_changes = 'U'
no_change_pointers = 'U'
upd_icdtxt_z3rl= 'U'
n_z3rl= wa_z3rl
o_z3rl = ls_z3rl
upd_z3rl= 'U'
lv_opt = ' '
TABLES
icdtxt_z3rl= ts_change.
CLEAR : wa_mod, <wa_tab>.
ENDLOOP.
Edited by: JaiKarthik on Apr 7, 2010 6:49 AM -
Do we need to create or actiovate any system objects for ess mss applicatio
Hi
I am new to ESS MSS business packages.i know we need to activate 5 pairs of JCO destinations,
do we need to create or activate any system objects ,because ess mss applications contains transactional iviews also
how they will communicate.once you placed the portal content, the default system objetcs for ESS and MSS are delivered by SAP only, we need to configure the same like JCO destinations.,
-
Enabling system menus for custom form
Hi All,
can I enable system menus First Row (CtrlH) and Last Record(CtrlE) for custom forms? They are not getting visible for custom forms. So I am getting the error as 'Menu not found' when try to enable that.
JishaHello,
These menus (from GOTO menu) are not exist in the User Defined Forms either type is UDO or not UDO.
You can implement these menus, with the same menu IDs (First Row = "5901") by Adding menu items to form
Dim oMenuItem As SAPbouiCOM.MenuItem = oForm.Menu.Add("5901", "First Row" + vbTab + "CTRL+E", BoMenuType.mt_STRING, -1)
But you should implement all the features you needed.
Regards,
J. -
E-Recruiting : Creation of Search Profile for custom infotypes
Dear experts,
Can anyone let me know if you have created search profiles for custom infotypes in eRecruiting?
The requirement is for the TREX to be able to search for Candidates based on the fields which are defined in this custom infotype. This infotype (9999) is completely custom defined mapped to object NA.
In the IMG,
I don't have to change the search profile type
I created a new Z Information category.
Here, i have to specify an extraction class for this Z Information Category.
Can anyone please tell me what this should be? Can i give it as "CL_HRRCF_CEC_INFOTYPE" ?
Also, can anyone please mention the significance of the table "T77RCF_SPT_INFTY " and how we should be handling the entries here for our custom infotype ? Should we create a custom class to specify here? How should we do this ?
Any inputs & thoughts regarding this will be invaluable.
Needless to say, i created the Z information category with the class CL_HRRCF_CEC_INFOTYPE but when i run the report RCF_RECREATE_SEARCH_PROFILE,It is giving me a lot errors.
Please help.
Regards,
SowmyaSowmya,
To answer your question, Yes, automatic generation of NA for newly hired/created PERNR (P) is because of the integration you have activated between PA and eRecruit via BADI implementations. Look at OSS note 997181 for details on how integration works.
If you dont need integration between PA and eRecruit on PA40 then you may have to tweak the BADI's.
regards
Sridhar Kandisetty -
Hi
I have created a custom workflow and I want to implement approvals as well in that workflow. I want to use AME for that because AME will give following functionalities
1. Return for Correction
2. Update Action
3. Adding ad-hoc approvers
Is there any document that refer to workflow and AME integration ?
Do all above functions (1,2,3) will automatically exist in AME or I have to implement those functionsGaurav,
AME and WF work hand in hand. I believe ML Doc 378312.1 (What are the ramifications of implementing AME with workflow already set up?) will answer your questions.
Pl also refer to ML Doc 431815.1 (Frequently asked Questions on AME)
HTH
Srini -
Lock object for customer(kunnr) in tcode vf01,vf02,f-28,va01
While using any one of above tcode by using particular customer number(kunnr) ,for same customer other tcode should not allow to access(should be locked)
I agree with nabheet madan, you could look for customer-exit/BAdI or at last implicit Enhancement spot to execute a call of ENQUEUE_EXKNA1 and lock customer record.
You must do that for every dynpro PAI where the customer number can be input (and release previous customer when changed, DEQUEUE_EXKNA1)
Are you sure that requirement is on customer number and not Credit Management ?
Regards,
Raymond -
Creation of partner functions for customer master with LSMW
Hello,
I try to create partner functions together with a customer via Batch Input in LSMW.
Object: 0050, method: 0000, program name: RFBIDE00, program type: B.
I use the structure BKNVP (Customer master partner functions) to create a new partner and set values for the fields KTONR and PARVW.
When I start the batch input the fields are filled in correctly in a new dynpro. After the confirmation of these values the dynpro changes back to the partner functions sscreen, but the value for KTONR isn'n being transferred. So I get an error message.
Is it only possible to update partner functions with that BI or what is going wrong ?
Thanks in advance and regards
AlexHi Alex,
Could you specify what error message you are getting?
Thanks!
Rudra
Maybe you are looking for
-
When I import a text file(comma separated) into a numbers spreadsheet all the data goes into one column instead of individual columns based on the comma separators. Excel allows you to do this during the import.. Is there a way to accomplish this i
-
Cannot open iPhoto in Mavericks. How can I recover my pictures?
I have just updated my OS to Mavericks and now iPhoto does not open because it is version 9.2.3 I want to recover all my pictures!!! How can I do it!? This is my main concern now. I do not want to pay 15 dollars just for the iphoto update, since I ba
-
hi i have a problem in executing a query in jdbc. i.e it executes all the query but the effect of last query is not reflected in database(Ms Access). if i use one query it will work properly.this problem occurs when i use more than one query. could t
-
SharePoint 2013 Development Environment for Devolopers
Hi All, What is the system requirements for developing and deploying web-parts in SharePoint site for developers? we are getting above error when trying to deploying web parts from local machine, our local machine configuration in win 7 with visual s
-
Updates to new version of i Tunes
Hi, I am new to this and just looking for some advice. When opening itunes on my PC I am prompted to update my itunes software to a newer version - fair enough, happy with that. It then takes me to the Apple Download Centre and prompts me to install