Creation of this signature could not be completed.

I have been using Acrobat for quite some time now without issue. All of a sudden however I can't digitally sign my documents.
I receive the following error when I try to digitally sign:
"Creation of this signature could not be completed.
Platform Exception
The system cannot find the file specified.
Error Code: 2"
I have done some extensive searching and can't find a fix. I have deleted the following folder (as recommended in the forums), C:\Documents and Settings\[username]\Application Data\Microsoft\Crypto, but it doesn't help. The error continues to pop up.
I'm using Acrobat 7.1 on a PC w/Windows Media Center 2005, pentium 4, 2gb ram.

How do i extract the digital signature from the document signature field into a XML format?
Is there a way to create a XML signature and have a signature visible on the PDF form?
Thanks
Regards
Delvin

Similar Messages

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

This Operation Could Not Be Completed...No Video

So I'm getting this error message "This Operation Could Not Be Completed...No Video" when trying to Log and Capture some footage from a mini DV tape.
I've tried this on my Macbook Pro, 10.5.8, Final Cut 7
I've tried this on my Powerbook G4, 10.4.11 Final Cut 5
I've tried to capture the footage directly into both machines and via external drives.
My deck is a Sony PD170. After getting this message I tried another tape on both machines. No problem capturing this footage. This tells me it is not a firewire issue.
Is it possible that this is a tape/capture setting I'm missing? I've used every NTSC setting possible.

Not familiar with this camera, but here are a few questions/ideas
When you play the tape in the camera, can you see the tape settings displayed on the camera's lcd? This may be a menu setting or a button push. What exactly are the settings?
Was the tape shot on this camera? Sometimes, there can be compatability problems with material shot on a different camera. I think some cameras will playback dvcam material via the video outs but not via firewire, Could this be the problem. I have some memory that there may be other formats some cameras will playback via video out but not firewire.
Hope this is of some help.

This operation could not be completed as there is no video - capturing PAL

Ok, I tried all the suggestions I've seen here. I have a Sony FX-1000 and I'm trying to capture a PAL mini-DV tape (which is easily read and played on this camcorder) using Final Cut Pro - latest version. The connection is iLink / Firewire 800 and has been used to capture many NTSC videos in the past. I have tried all settings on Final Cut Pro - under Capture Settings - to no avail.
In all cases, "Preview Disabled" is displayed in the color-bar window. However, the playback controls (rewind, play, ff) all work fine using the buttons under the window. The miniDV plays fine on the camcorder - both picture and sound.
After starting the playback, and pressing "Capture Now", I get a solid black window indicating that the capture software is "waiting for timecode", even with the tape obviously playing. After about 2-5 seconds, I receive the error message "This operation could not be completed as there is no video".
I've tried several computers, several cables (both Firewire 400 and 800) - as well as all the PAL settings and FC Pro and FC Express 4.0. So, any suggestions? I could use some help.
Thanks

Solved the problem. I used an old Sony Handycam DCR-HC28 with Firewire connection and used Final Cut Express with the settings: PAL, DV-PAL DV Converter in Easy Setup.
I was NOT able to control the Handycam with this setting but I could start the capture and then press "play" on the Handycam and it captured. Strange way to solve the problem. Hope this helps someone.
BTW - the HDV FX-1000 did not work this way. I guess the cheap camcorder works better at this!
Thanks to all for the help!

This purchase could not be completed please select a different payment method

I`ve bought a new BB as a present to my wife - Z3.
I`ve registered for her new BB ID account - **Removed**@dunaeva.su
And we can not purchase anything having the same problem using all of our cards - "this purchase could not be completed please select a different payment method",
I`ve read a lot of forums and web pages and belive that our problem - ur sistem has flagged her account as potentially Fraudulent or Blocked.
U shold unblock her and bring ur appoligise.
Edit: Email removed. At no time should you provide any personal information to any other community member. Please review the Community Guidelines and Terms and Conditions of Use. for further information

I apologize for the rudeness of my first post - i was really disappointed with the situation when i`m not able to provide to my wife fully equipped phone with all her contacts and sms (need some paid app). I`ll check up your recommendations and come back with a report or new questions.

This Operation Could Not Be Completed

Hey guys,
I work for the Dallas Cowboys as their multimedia coordinator. I've been having this problem for some time, but after months of frustration I think it's finally time to ask for some help.
Basically, on a very inconsistant basis, an uploaded videos mobile component (mp4) file won't work on my iphone when I test it. I currently have one video doing just that. Here is the link to our mobile multimedia page.
http://www.dallascowboys.com/multimedia/mobile_multimedia_center.cfm?id=3770C765 -CA7A-8B74-A8D0D5A4DFFC1422
The mp4 will work on on a browser, but gives me the error "This operation could not be completed" when trying to view it on my iphone.
The only common issue I can see in files with this issue is that they tend to be the videos with more production value. I generally encode these files in Adobe Media Encoder, but have also tried them in compresser with no luck.
Any ideas?

Are you processing on the CPU or the GPU? What graphics card are you using? Do you have the latest graphics driver for your graphics card? How much RAM is in your machine? Are you running 32-bit or 64-bit Photoshop? What size images are you processing?

Help! HDMI adapter sometimes works, sometimes not. "This operation could not be completed."

Hi,
I bought an HDMI adapter/cable, and I have trouble playing iTunes-purchased videos when connected to my iPad 2. 90% of the time, I'll plug it in and see my iPad mirrored exactly on the TV. But when I try to play an iTunes TV show, the video screen will close and display: "This operation could not be completed." I can play non-iTunes videos and shows just fine on the TV, though, so I know it's not really a problem with the adapter/cable.
I fiddled around with it, and 10% of the time the iTunes TV shows magically start displaying on the TV. If someone walks by and accidentally unplugs the cord, though, it'll stop playing iTunes purchases when I plug it back in. I have no idea what actions or combination of actions cause the iPad 2 to suddenly play the videos.
I've tried everything. Restarting the iPad 2 with the adapter in, restarting the iPad 2 with the adapter unplugged, changing cable positions, etc.
I even tried to swap out the HDMI cable, but the same thing happens with another brand new HDMI cable. Funnily enough, my iPhone 4s plays ALL purchased TV shows fine on the TV without a single hiccup. My iPhone 4s and HDMI adapter/cable get along really well . This problem is specific to my iPad 2.
Any clue how to remedy this? Thanks!

I see no one has addressed this issue. I'm having the same problem but no one seems to have an answer. Did you ever get this issue resolved Joe?

Capturing PAL: "This operation could not be completed...." Help!

Hello,
I am attempting to capture PAL footage from a miniDV tape. I am using a Sony DSR-11 deck. From the Easy Setup menu, I select DV-PAL. In the Log & Capture window I select Capture Now and the the follow error message appears:
"This operation could not be completed as there is no video."
Any tips?

Did you make sure the DSR-11 was in PAL mode? The switch on the back.
Shane

Problem with App catalog this action could not be completed

I have not been able to use App catalog since a few days.
I am in UK on O2 network using US unlocked Pre2. It was possible to use App catalog and install free apps only. Now App catalog always load with error: " this action could not be completed, please try again later".
Post relates to: Pre 2 p102una (Unlocked NA)

@ rufat_j and @alfagtv100:
Could please send me a private message containing the palm profile account, IMEI, serial #, carrier used, and country for those phones. This information can be found in the device info app.
Please also tell me if you do have any homebrew applications installed or not, apps installed from other sources than the app catalog. This can greatly help.

BUG: This action could not be completed. Try again later.

In trying to update the app, "Foursquare (Now)" via Preware, I am encountering the error, "This action could not be completed. Try again later." I previously had installed this app, which ran normally. I was updating the app with the newest version when I encountered this error. I uninstalled the app, then attempted to reinstall it, but it gave the same error (and now I do not have even the prior version running).
I have had no other difficulty installing homebrew apps and app store apps via Preware.
I'm on a Pre running WebOS 1.4, with 5.4 GB free.
A little help?

Hello thonght and welcome to the forums;
Each phone is associated with a specific country. The country is assigned automatically the first time a Palm profile is created on the phone. The App Catalog apps you can access are based on the country associated with the phone.
Phones associated with the following countries or regions can use App Catalog to purchase apps and to download free apps:
Canada; Germany; Ireland; Mexico; Spain; United Kingdom; United States
Phones associated with the following countries or regions can use App Catalog to download free apps only:
Australia; Austria; Belgium; China; Czech Republic; France; Hong Kong; Italy; Luxembourg; Netherlands; Norway; Poland; Switzerland
As Vietnam is not a currently supported country for the App Catalog, this is likely why you are unable to access any applications.
I apologize that this is not an answer that will correct the error you are seeing, however I hope this has been helpful.
TreoAide

Re: Fails: "this call could not be completed becau...

Yesterday I received a call from xxx xxx xxxx This was in response to a Craigslist ad.. I have received so MANY scam attempts i think that this is some sort of scam or the number is displayed wrong. I tried to call this number 5 times. Once on the Land Line and many times using skype. All I get is "this call could not be completed because you're trying to reach a skpye user".. My skype works fine.

Hi, Jbb522 and other readers,
Please contact Skype Customer Service directly when you encounter these types of call issues. We here in the Community do not have the tools to diagnose or resolve most of these problems. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
Look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also impede reaching an agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Iphone 4 video from camera ''This operation could not be completed''

Hello.
Today I filmed an important video with my camera, it is really important, and i need it to work. I was in a bit of a hurry, so i got my phone out, filmed, and the camera app freezed, then i just pressed the home button and locked the phone. Now when i try to play the video, it says ''This operation coudl not be completed'', i know its the camera app freezing the problem, but can I fix this video in any way? Please tell me there is a way

Not familiar with this camera, but here are a few questions/ideas
When you play the tape in the camera, can you see the tape settings displayed on the camera's lcd? This may be a menu setting or a button push. What exactly are the settings?
Was the tape shot on this camera? Sometimes, there can be compatability problems with material shot on a different camera. I think some cameras will playback dvcam material via the video outs but not via firewire, Could this be the problem. I have some memory that there may be other formats some cameras will playback via video out but not firewire.
Hope this is of some help.

QuickTime won't save ("This operation could not be completed")

I've done several Full Screen Recordings that are very important, but none of them will save using the File > Save option OR the File > Export options.
Running QuickTime 10.3 on a Mac Book Pro (OS 10.9.5, 2.7GHz Intel Core i7, 16GB 1600 MHz DDR3 RAM). This should work just fine.
There's no help I've found on the internet or these help forums that are new enough to be relevant. Help!

Not familiar with this camera, but here are a few questions/ideas
When you play the tape in the camera, can you see the tape settings displayed on the camera's lcd? This may be a menu setting or a button push. What exactly are the settings?
Was the tape shot on this camera? Sometimes, there can be compatability problems with material shot on a different camera. I think some cameras will playback dvcam material via the video outs but not via firewire, Could this be the problem. I have some memory that there may be other formats some cameras will playback via video out but not firewire.
Hope this is of some help.

This operation could not be completed as there is no video

I get this response from final cut when I try to capture footage. I have a Sony TRV950 which works fine using my windows PC capturing with Sony Vegas

How do you reset settings on your capture scratch? I can find it in Finder, but do not see how to reset. When I type "reset capture scratch settings" in help, it has 0 results.
Also, how does this work on FCE 4?
I get that same error message. I cleaned the heads on my cam corder too, but it didn't make a difference

Capture error-"this operation could not be completed as there is no video"

Help!!
Project Due to client very soon. I've got my XL2 hooked up to my mac and capture was fine until the above(subject) error message popped up. All connections are tight, and I've tried changing, switching and trashing preferences. I spent a 100 bucks for 15 minutes of support from some FCP support company, there solution was temporary. They had me Turn off the G5, and disconnect everything. Upon restart capture worked for about 10 more minutes then error message popped up. Don't know what else to do, don't want to spend a 100 more dollars?
Help!!!!

Canon cameras are notorious for not behaving if you have any other FW Devices working on the System - this includes External Hard Drives.
Try removing any other FW devices - then re-setting the FW Bus as Jerry suggested. THEN connect up your camera and turn it on (VTR mode) - THEN start your Mac.
Don't pay anyone for support - it's all here - for free!
Good luck,
Andy
G5 Quad 8GB. 250, 500 GB HDs. G-Raid 1TB. FCP 5.1.1. Shake 4.1. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

Creation of this signature could not be completed.

Similar Messages

Maybe you are looking for