Creation of Time stream in APO from R/3
We always prefer our ECC system to be the master data system . We intend to create Time stream in APO based on planning calenders from ECC system .
Kindly confirm if SAP has provided any time stream creation logic in APO from an OLTP system or R/3
Gomathi
You can transfer Factory Calendars from ECC to APO by using program RSIMPCUST in APO. This requires ECC to be defined as a Source System in APO BI (Transaction RSA1). This transfer uses RFC, but its not technically part of the CIF.
Once Factory Calendars are transferred to APO, you can create Time Streams based on them.
Rishi Menon
Similar Messages
-
Time stream from resource WC not valid for total display period (PP/DS)
Hi Apo Experts,
As I enter the product view in the PERIOD TAB, this error message pops up "Time stream from resource WC not valid for total display period".
Diagnosis was "The time stream for resource WSMT200_9000_001 is not valid for the general display period. This can cause the display of the time buckets profile for this resource in the product planning table to be inaccurate."
Please, can someone help me understood what was this error mean and the cause? And maybe an idea on how to correct this.
Greatly appreciate your answer!
Thanks in advance,
RaymondHi Raymond,
the capacity of a resource in the live cache is generated in the past and in the future according to the settings Planning Parameters (/SAPAPO/RES01) on tab general data. Here the days- and days+ are important.
e.g. the resource has got the following parameters: days- 30 and days+ 180.
Today we have the 1th of January 2008.
After starting the product plan table you can choose the planning horizon from/to.
If the time fence is more than 180 days in the future you will get your message above because planning parameters do not "allow" more than 180 days in the future.
Instead of this the message do not appear if you choose a smaller value.
For more information please see SAP Note 449452.
Hope this helps.
Greetings
Timo -
Time stream from resource not valid for total display period
Dear Friends,
In APO after PPDS Run, and executing Product View, in period tab of product view I am getting an error with following meassge.
Time stream from resource WP5_0110_001 not valid for total display period
Message no. /SAPAPO/RRP_PT055
Diagnosis
The time stream for resource WP5_0110_001 is not valid for the general display period. This can cause the display of the time buckets profile for this resource in the product planning table to be inaccurate.
Can anybody come across such type of error, if yes please let me know the possible solutions to overcome this problem.
Thanks and Regards
NileshKinldy refer to SAP Note No. 449452 for the exmplanation and solution to the issue.
Rgs - Vikas -
Just downloaded the 7.1.1 IOS update and I'm able to stream my music from the cloud. I'm wondering how I can stream more than just my purchased music?And does this use up data? Also, how can I get playback to stop pausing for periods of time? It is a wifi thing??
If streaming music when connected to your carrier's cellular network, it uses cellular data.
Only the music you purchased from the iTunes Store can be streamed unless you have purchased iTunes Match.
If there is a slow down at the server where the music is stored or high traffic, steaming can be paused. You can also download a song from the iTunes Store cloud to your iPhone so it doesn't need to be steamed. -
Can I stream things directly from the time capsule to my AppleTv without using my computer?
I have an older MacBook and I'm worried about the storage so I want to get things moved to a Time Capsule. I was just wondering if I can stream things directly from the Time Capsule to the AppleTV without having to store them in iTunes on my computer and play them off of there.
You cannot stream from a TC .. it is not a media device.. you can store movie files on the TC but you still need to run the computer to play them.
Depending on how you connect this can cause dramatic slowdowns.
A WD Live TV can play raw movie files from a TC.. because it is not a media streamer which is all the ATV is, it is a full media player. -
Time Stream ID in Storegebucket Profile
Hi ,
can any one help in finding the difference for a factory calendar which we use in R/3 to the time stream id what we use in storage bucket profile...
what exactly time stream id does in apo demand planning
thanks
Aravi RA time stream is a period of time divided into period types such as weeks or months used as a planning calendar.
Its use depends on the application
for eg in DP Storage bucket profiles, attaching a time stream should restrict data being stored in some periods - based on a holiday calendar for example.
use /sapapo/calendar to create time streams with reference to a calendar and use a work day calculation.
in the storage bucket profile creation, use this time stream id -
I have a Macbook Pro and an Apple TV. What I'd like to do is stream a movie from my CinemaNow Account to my television by using my Apple TV and my Macbook. I know that I can do this my using the mirroring feature, however then I can no longer use my Macbook for anything else because my TV will only display what is on the screen of my Macbook. Now with this is mind, what then is the point of having multiple displays through the use of my Apple TV, if only one display can be used at a time unless they both show the same image? Or is there a way for me to be able to stream the movie to my TV and still use my Macbook for other purposes (multi-tasking)?
To enable a second display over AirPlay, you first need to be connected to the same network as your Apple TV. Next, open System Preferences > Displays, and select your Apple TV from the “AirPlay Display” drop-down menu.
Once you do this, your display may flash as the second display connection is acquired, and the Apple TV takes over as the second display. If the displays are mirrored, then you can correct this by opening the “Arrangement” tab in System Preferences > Displays, and ensuring that the “Mirror Displays” checkbox is unchecked.
In this same “Arrangement” tab, you can move the displays around in the pane to ensure that they're positioned correctly, relative to your physical space (usually side-by-side, or top-down). The primary display here is denoted here by the Menu bar on the display. The arrangement helps with being able to drag windows from one display to the next: if your secondary display is arranged to be to the right of your primary one, for example, you can drag things to it through the right side of your primarcy screen. -
2 atv's both have home sharing enabled but one asks to turn on home sharing on my pc, but it is enabled on pc so I can only use one at a time to watch movies from my computer
Both atv,s are on the same network, they are wirless and the computer can see them and they are named different.
what ever one i switch on first gets to stream from my computer and the other one asks for home sharing to be switched on, then if i switch both off and start the other one first it gets to stream and the other one which worked asks for home sharing to be turned on. i have hidden all functionality, netflix etc as these are for my 7yr old kids. -
Creation of SO,PO, etcin sap from data in legacy system
Hi
The requiremnt is :
there is a legacy system from it almost 6000 lines of data are genereated daily , and from it they want to create SO , PO , inventory, etc etc in sap ECC but they want to use abap proxy . so i have to go for abap proxy ,
can any body help me out with a step by step how can the scenario be implemented using abap proxy on the server side .
I know the concept of server proxy implementation but how to go with the above ,
pl ans fast , time is melting away from my hand
rgds
shaziaHi Shazia,
we can create SO,PO..etc through ABAP proxy.
in proxy program you have to call BAP_PO_create...etc function module.
please check the follwoing information regaring proxy.
Proxy generation enables you to create proxies in application systems. Proxies encapsulate the creation or parsing of XML messages and the communication with the relevant runtime components required to send or receive the messages. The proxy runtime controls these processes and can itself be controlled in application programs by means of additional methods.
Since the communication between the sender and receiver is decoupled, you can use proxies to exchange messages with various different communication parties, and also by using adapters. However, this section of the documentation only discusses the programming model for the proxy runtime.
Please go through below docs
XI: RFC or ABAP Proxy ? ....ABAP Proxies with attachments
/people/michal.krawczyk2/blog/2006/04/19/xi-rfc-or-abap-proxy-abap-proxies-with-attachments
/people/siva.maranani/blog/2005/04/03/abap-server-proxies - ABAP Server Proxy
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Client Proxy
ABAP Proxy Runtime
http://help.sap.com/saphelp_nw04s/helpdata/en/02/265c3cf311070ae10000000a114084/frameset.htm
Setting Up Point-to-Point Connections with proxy
http://help.sap.com/saphelp_nw04s/helpdata/en/85/78af1bf407434796aaf8dbd6d4e7b7/frameset.htm
Reliable Messaging ? EOIO in ABAP Proxies
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3dfac358-0d01-0010-5598-d4900e81a30c
regards
mahesh. -
APO-MD - Mass Creation of Product Masters in APO.
I have need to create about 100,000 product masters in APO. The product master general data does exist as it has been CIFed over from R/3. However these need to be mass extended to several customer locations.
I am looking for any advice on tools/programs that will allow mass creation of Product masters in APO.The Functiona Loader did mass create products but the product model assignment did not work even though the model number was mapped in the loader.
Did I miss something in the process.
Is there another way to mass assign products and model. -
Time stream and Factory Calendar settings issue. Problems in scheduling!!
Hi,
We have a factory calendar of working days from SUN-THU only (5 days a week).
Every working day starts at 07:00:00 (first shift) and ends at 06:59:59 at the following day.
I am not sure how to set the time stream. Do I set it for daily (5 days a week) with gaps start at 07:00:00. Or, as the standard way as daily (all days 1 -7) 00:00:00 - 23:59:59 without gaps.
We are using the planning board to schedule production orders that were created in ECC, but we see that we have problems with date corelation between the systems, and we think it is due to some wrong setting of the time stream!
Thanks for your repliesHi,
For scheduling, the time stream of resource is relevent. As to how to generated the time stream, it depends on your resource capacity setting and your factory calendar. I'm not sure why your factory calendar starts at 7:00:00 daily. For the time steam of the resource, it should be ok to start at 7:00:00, and you mayexecute the time stream generation (ta. /sapapo/rest02) to save the time stream in LiveCache.
Claire -
Can't stream HD content from iMac to Apple TV - help pls!
Hi.
Until a few days ago everything worked fine but now I can't stream HD movies from my iMac iTunes library to my Apple TV or iPad.
My library is recognized just fine, I can access all the films - but when I try to play them all I get is the dreaded waiting circle which just circles forever without any movie playing. SD content will play but only after a loooong wait - but forget HD films. They just circle forever - in a few cases they will play for a few seconds and then halt.
As mentioned, I have the same issue on my iPad Mini 2, so it might not solely be an ATV problem but rather a Yosemite / iTunes issue? Not sure.
The facts:
I have changed nothing in my setup from a few days ago when everything worked fine and until now when nothing does.
I have rebooted my router.
I have rebooted my iMac and made sure Yosemite is updated.
I have factory reset my ATV3 and updated it to the latest firmware
I have renamed my iMac iTunes library as was suggested by someone in another thread.
I have tested my network speed and it's fine (30 MB down / 7 up)
Still it doesn't work :-(
Can anyone help? This is so annoying - it's like the transmission speed has gone way down between my imac and ATV and iPad.For what it's worth this is my story, Apple TV on which I now rely totally for my entertainment started getting sluggish a few weeks/months? ago, both the one in the bedroom and in the living room. Loading was desperate the spinning wheel driving me to distraction, I did all the usual reset the settings, rebooted the Mac, repaired the disk and kicked the cat, brief respite and then back to the dreaded whirligig of death.
This evening I tried something different, my Airport Extreme handles 2.4 and 5GHz so I ran Wireless Diagnostics (hold down option key whilst clicking on wi-fi symbol) (then go to window in menu bar and select scan) and ran a scan.
The scan identified the best channels for both frequencies, I selected these as opposed to automatic and all was well, average time to load and start a movie 20 seconds.
Try it I hope it works for you I have had so much help from the Apple communities for so many years I hope I can give a little back. -
This is what happens when I leave the computer idle for a while and the Windows automatic maintenance starts:
Driver file Description ISR count DPC count Highest execution (ms) Total execution (ms)
ntoskrnl.exe NT Kernel & System 0 50764 0,235854
332,950426
A DPC spike is generated by ntoskrnl.exe causing drop outs in real-time streams.
JTSHi Fjtorsol,
We hope your issue has been resolved, if you've found solution by yourself. you could share with us and we will mark it as answer.
This high Deferred Procedure Call (DPC) latencies are usually caused by certain drivers, if it is caused by automatic maintenance, please re-check your task schedule which is marked as “when computer is idle”. As what has been suggested by MVP ZigZag, please
use the Microsoft Windows Performance Analyzer from the Windows Assessment and Deployment Kit (ADK) to identify the cause of any DPC latency spikes.
https://www.microsoft.com/en-gb/download/details.aspx?id=39982
DPC CPU Usage Summary Table will open containing a list of drivers/program. This list is already correctly sorted (by the Actual Duration column). The process on the very top of the list is therefore likely to be the cause of your problem.
Regards
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Airplay ceases to stream iPod app from iPhone4 to ATV2, all else works
So, I have been running the new ATV since it came out, streaming without any issues from the get-go, all streamable / Airplay content, from my iPhone4. All apps / software is UTD on all devices.
After updating to the new Apple remote app, I can no longer stream the audio from the iPod app. The airplay button is there, it turns blue, but nothing comes through the ATV. This also applies to Pandora.
All the other apps (Youtube, pictures, Macbook etc) are completely fine via Airplay, ie this seems to be isolated to Ipod app / Pandora ie audio only.
Help!
Have rebooted all devices several times to no avail.Same here. See below. I think we need to send a trouble ticket to apple:
Have Apple TV, Macbook, iPad and iPhone. All updated to the latest OS versions.
Movies (including youtube) streams fine from iPad or iPhone to Apple TV using Airplay.
But music alone won't. So if I play a song on iPod or Pandora, I get the Airplay icon, I select Apple TV, but no audio comes out of the apple tv. It thinks it is streaming, but it isn't. But movies (with the corresponding audio) streams to Apple TV fine.
On the other hand, music from my macbook goes to Apple TV fine.
It is just streaming music from iPad and iPhone that doesn't work.
Note, my problem is not that I don't get the Airplay icon-- I do. It just thinks that it is streaming and nothing is happening.
I've rebooted Apple TV, iPhone and iPad. No success.
Anyone else seeing this? Any thoughts? -
How can i stream media wirelessly from macbook pro ? video...
how can i stream media wirelessly from macbook pro mountain lion to dynex bluray player or insignia mhl tv? i also have a time capsule...
most reliable method found is get an AppleTV hooked to TV, and get program called BEAMER (free trial or $15 purchase application). Lots of programs CAN stream to TV via wifi, but many of them get audio syncing wrong/bad. Best addition upgrade to any Apple PC or laptop isnt internal, but the AppleTV BEAMER app is the best Apple/Mac app out there to me, ... Ive got 7 Terabytes of Videos, ...the Beamer app takes in any video format, its just incredible.
Maybe you are looking for
-
Material Description in Chineese language
Dear All, I am trying to upload language key ZH - Chineese and material description in chineese language by bdc and Lsmw from text file. But after uploading, text is showing in some other format which is not chineese. Please give me some suggestion t
-
180: TV tunner sound problem
I got the AverTV Tv card (I got it because it was one of the only cards without FM radio) instead of the MSI one, I couldn't find the MSI one anywhere it was hard enough figuring out which card was the one for the mega-pc. The problem with the one I
-
Prime Infrastructure 1.3.0.20 - High CPU Load
Hi community, we have a running Prime Installation (setup a few month ago), and since the last 2-3 weeks my customers admins complain that the system´s response time is very slow, regardless which browser they use. I already did a "ncs cleanup" thro
-
I've shut down my computer numerous times hoping the problem will cease to exist but to no avail. If I attempt to click anything the color ball starts spinning and doesn't stop.
-
By mistake I purchased Geo news aap.now I don't want it ,and want to unsubscribe its .don't want to pay bill.How can I do this?