Creation of TO with 101 Movement type

Hi
My requirement is:
To create a Transfer Order(TO) with Movement Type 101 and when TO is created, checkbox "Immediate TO" should get ticked.
For TO creation I am using : L_TO_CREATE_MULTIPLE
But Checkbox "Immediate TO" does not gets checked for the PO.
Please suggest how to proceed.
Many thanks in advance.

Hi Andrei
Thanks for your reply. What you have mentioned above is correct.
Immed. TO(Checkbox under WM tab in Material Document)
Automatic TO Creation Immediately After TR Generation
Indicator determining that automatic transfer order generation is active.
Automatic transfer order generation can be initiated both during the creation of the IM document as well as during material staging for production orders (PP interface).
After the IM document has been created, a transfer order for a transfer requirement or for a posting change notice is created, provided the following requirements are met:
Automatic transfer order generation is active (depending upon the movement type for all items of the IM document for which a transfer requirement or a posting change notice is to be created.
Within the entire document, the postings are executed in one warehouse number only.
If the current document is to created for each function module, for example, from the usage decision of QM, the automatic transfer order generation function must not be switched off.  This can be the case if on the basis of the constellation in the inspection lot automatic TO generation is not appropriate (see also the documentation on the interface WM <-> QM).
My requirement is not to use Customization i.e. I donot want to check 'Automatic TO' in customization.
Instead I am using FM: L_TO_CREATE_MULTIPLE  in a program for TO creation.
And when TO is created with Movement type '101' from the program, it should also check the checkbox 'Immed. TO'
Just wanted to confirm if this is possible.
Thanks & Regards,
Shashank

Similar Messages

  • Goods Receipt Report With 101 movement type using bapi_goodsmvt_create

    Dear Abapers,
            i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
    bapi_goodsmvt_create and data should upload through excel sheet.
    still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
    What are all the inputs i need to take and please give some valuable inputs to me.
    please do help ..... thanks for advance..
    Thanks & regards,
    Vinay.
    Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
    Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

    Dear Abapers,
            i am getting some problem, i got requirement like Goods Receipt Report with 101 movement type using
    bapi_goodsmvt_create and data should upload through excel sheet.
    still facing problems, i have searched sdn forum n sdn code also, but relevant answer i could not find.
    What are all the inputs i need to take and please give some valuable inputs to me.
    please do help ..... thanks for advance..
    Thanks & regards,
    Vinay.
    Moderator message : Spec dumping is not allowed, show the work you have already done. Thead locked.
    Edited by: Vinod Kumar on Sep 27, 2011 10:58 AM

  • Post extra goods recieved with 501 movement type

    Hello experts,
    I have a requirement that after PO, at the time of MIGO if extra quantity is received from vendor then that extra quantity should automatically get posted in background with movement type 501 and the actual quantity will work as normal.
    Like: if purchase order is of 100 quantity and quantity received from vendor is 150 then at present when i am trying to post error message is coming "quantity exceeded by 50 quantity" but I want this 50 quantity should get posted with 501 movement type automatically in background.
    How should I do this??
    Please help.

    HI
    Hi,
    Is it possible if I ask abaper to debug the code and insert some code within.
    Is it the right solution to insert programming lines within standard sap transaction code???
    NOT possible
    I have some question for you
    1) What will be accounting posting for 501 it will same as 101 or different
    it will different
    2) system will generate two accounting document or one
    If two how you will post MIRO ,because 501 not link with PO
    Regards
    kailas Ugale

  • BORGR 649 error message while posting with 105 mov type

    Hi Gurus,
    I faced a problem when I try to post with 105 mov type, when material doc is related to Inbound delivery.
    Explained better:
    I did a purchase order with inbound delivery confirmation.
    I carried out Good Receipt (related to Inb delievery) with mov type 103 (blocked stock from PO)
    When I try to post stock with 105 mov type, the following error appear:
    "Movement type 105 not allowed as it is not assigned to item category"
    Msg ID: BORGR
    Msg no: 649
    I already checked delivery item category configuration, movement types involved and transactions allowed for each mov types.
    Take care that the error mentioned doesn't occur if posting is related directly to purchase order, instead of inbound delivery..
    Thanks in advance
    Regards
    Ale

    Hi Sandra_PF
    in the inbound delivery the mov type is not 105, but 101 (correct, it's the default value for Inb delivery)
    With transaction MIGO I do 2 different operations (in 2 different moments):
    1°) Good Receipt referred to Inbound delivery (103 mov type - Blocked stock from PO)
    2°) Stock posting with 105 mov type, to transfer stock from Blocked to Unrestricted
    Here the system notice me that is not possible, because the mov type 105 is not assigned to the delivery inboud category.
    Please note that we did the same thing in another system with the same configuration, without any problems..
    Cheers,
    Ale

  • Clarification on Account grouping -OMWN for 101 movement type

    Hi SAP MM gurus,
    In OMWN - Account grouping , I am not able to find any entry for 101 (Goods receipt for Purchase order B and with no consumption posting ) with Value and Quantity updates . There are entries for 101 movement type with special stock indicator but not able to find any entry for standard good receipt for Purchase orders ( No Special stock Indicator , Value and Quantity update checked , Movement type indicator B and No Consumption posting ). There are no issues with the accounting posting for goods receipt with standard purchase order with BSX being debited and WRX being credited. I am trying to understand the logic for this posting and I am not able to understand from where (customization settings) this posting is derived from. May I request your valuable inputs in understanding this logic.
    Thanks in advance for your immediate response.
    with regards,
    Anandj

    Hi there,
    Not sure where you want to go... but here is a tip
    Would it make sense to have value and qty update and no consumption ? it can either one or the other but not both.
    Now in prg there are further checks that makes other option possible like a GR for PO that is not valuated.
    Remember that these key determination behind the account grp / TE key is a kind of black box where the prg is hardcoded to sort out what keys to take.
    I hope this helps... Cheers

  • BAPI_GOODSMVT_CREATE with a movement type of 262

    hi:
    when  I do a goods movement using BAPI_GOODSMVT_CREATE with a movement type of 262. If I supply the reservation number it creates the material document with a movement type of 261 ignoring the 262 . why ?

    Hi,
    Check if GM_CODE in the import parameters is set to "06" for the reversal movement type. If not, please set it to 06.
    Regards,
    Sachin .

  • Difference between Return Po and Retuning with 122 movement type

    Dear Experts,
    i need some clarification on Return Po and retuning goods with 122 movement type in the context of Excise invoice.
    in our previous company we used 122 movement we capture excise invoice with J1IS and referring the incoming excise
    and return the material to vendor.
    in present company we are directly doing return Po and capturing excise invoice with J1is,here we are not capturing against the
    incoming excise,please clarify me.
    Regards,
    Varun

    Hi,
    Refer the below thread:
    Difference between 102, 122 and 161
    In terms of stock movement, both 122 and 161 represents the return delivery to your vendor. The difference takes place in terms of how you are returning your delivery to your vendor - It is movement type 161 that SAP will automatically propose if your return PO is referenced. Otherwise, 122 movement type will be used instead.
    Regards,
    Prashant
    Edited by: Prashant Prasad on Apr 22, 2011 8:51 AM

  • Overwrite Standard Movement types with Z movement types in MI10

    Dear All,
    We have a requirement where we need to replace standard movement types 701 and 702 with Z movement types in transaction MI10. Would there be any exit or BADI in MI10 which would serve this purpose?
    We also tried cloning the transaction MI10 but some checks on the TCODE is giving an issue.
    Any one come across a similiar requirement, kindly help.
    Thank you.
    Johnson
    Edited by: Johnson Ittyerah on Dec 19, 2007 2:20 PM

    following badi may help  to change the movement types:
    MB_DOCUMENT_BADI
    Regards,
    Gopi ,
    reward points if helpfull.

  • MB1A requires Serial number with some movement types

    Hello:
    I am using MB1A for goods movement. The client has a movement type (X82) which when I use it does not require serial number for goods movement. There are other movement types which when I use them in MB1A do require serial number. Now, I copied movement type X82 to a new movement type (X68) (IMG activity 'Copy, change Movement Types', option 'Copy all'). I did again the exercise in MB1A with new movement type X68 and what happened: SERIAL NUMBER IS REQUIRED!
    Do you know about any additional configuration in order to achieve that there NO SERIAL NUMBER is required? I appreciate a lot your help as I am a little bit hurried with this issue!
    Thanks in advance,
    Dominik Ley
    Santiago, Chile

    D,
    X82 ??
    All movement types are 3 digit (non-alpha). Are you absolutely sure you have an X82 movement type ?
    If you have that is quite an unusual bespoke development.
    Nick W

  • Storage location not found in MIGO for 101 movement type

    Hi all,
    While posting goods receipt in MIGO for purchase order using 101 movement type,i am not getting the storage location field..Though goods is getting posted in migo transaction,it is not getting updated in the stock while seeing it in mmbe...
    can anyone help me..
    Thanks&Regards,
    Hari

    Hi,
    When ever we purhcase a material , it can be for two purpose
    1. Material to Stock
    2. Material for Direct consumption
    If you wish to stock the material Material No is required and Cost Center Assignment is not required. In this case when you create Goods Receipt (MIGO) storage location will be asked.
    If you have given a Cost Center or say any other Account Assignment, then at the time of GR (MIGO) storage location would not be asked, as the system assumes that it is for that particular cost center.
    I think in your case you have given some Account Assignment category in your PO. Please check.
    Hope it is of your use. Please reward.
    Nikhil

  • Posting with MM Movement Type 309 material to material: Error in WM

    Hello,
    i post an MM-Movement type (Bewegungsart) 309 (material to material).
    The MM-goods movement works, but then in warehouse mangagement there is a problem:
    The creation of the transfer order (Transportauftrag) stops in many cases.
    The aim is to post Material A to the same storage bin in Warehouse Management where Material B was before.
    I programmed this in user-exit (ZXLToU03) that by movement type 309, always taking same storage bin. But then I often get the error: transfer order could not be created. Then I have to do the creation of tranfer order in foreground and then I get an error like this:
    capacity of the bin location is not enough.
    The Problem is that I do a posting for example:
    001 010101                   to     922 Umbuchungzone    -->  Transfer order Pos 1
    922 Umbuchungszone  to    001 010101                    --> Transfer order Pos 2.
    And so the first transfer order position is not confirmed when I do the transfer order Pos 2.
    How can I confirm Pos 1 by batch-input? The Programm to do 309 should posting 1000 materials in one step. But in Warehouse management I get those problems?
    Is it possible to increase the capacitiy of the storage bin and then decrease it after creation of transfer order(where can I do this and when)???
    I hope anybody can help me.
    Thanks.

    Hello Kevin,
    I donu2019t think it is necessary to use a user exit to keep the Material B (that is transferred from Material A) in the same bin.
    This can be controlled in the customizing: indicator Post to same bin, that can be set in the WM Movement type (V_T333-KZUAP) and in the Storage type (V_T3010-KZUAP).
    Now I donu2019t know your business process but I am surprised that Material B requires more space than Material A since it is u2018bornu2019 by means of a transfer posting and not a production or packing step that makes it bigger in terms of capacity required.
    A workaround for this could be to transfer (LT10) Material A first to a separate Storage type (with the Post to same bin-flag set) that has no Capacity check and after the 309 posting transfer it back into the warehouse with LT10.
    Success and thanks beforehand for any credits!
    Kind regards,
    Bart

  • Other solution for MBST of 101 movement type

    HI,
    i am facing an issue that i am unable to cancel my GR, because we are doing GR with refernce to confirmation in PO but after doing the GR the confirmation tab isn't showing the quantity.Due to that i am uable to do 102 and 122 monement on that PO and material document. Kindly suggest me for this that what other possible solution i can do for this problem.
    Thanks

    Dear
    Please set the reversal setting in SPRO with movement type 101 to 102 & 122
    Please follow the below path
    SPRO>>Material Management>>Inventory Management and Physical Inventory>>Movement Types>>Copy, Change Movement Types>>Movement Type>>M/T 101>>Then Click Reversal /Follow
    There you can set Movement type 102 & 122
    your problem will be solve.
    Regards
    Aamir

  • MIGO 101 movement type- Excise tab.

    Hi ,
      Excise tab is not coming for the movement type of 101 in migo, For all other movement type's ,it ll come, why reason???
    I made all settings in J1ID.
    -Thanks & Regards.
    Balajee Jeyaraj.

    Hi ,
    I am also having the above said problem, But in my case both the materials are maintained by value and quantity. What else could be the issue ? One material value is maintained with standard price for another it is maintained with moving average price. For moving average price maternail the storage location is getting displayed.
    Your inputs will be helpful.
    Regards
    Prasath

  • Finish good material not showed with 131 movement type in mfbf code in REM

    Hi experts,
    I am working in Repetitive manufacturing process, I have 6 operations in rate routing from which 6th operation is mile stone.
    When i confirm last operation through MFBF, system shows components list with movement type 261 but finish material is not showing with movement type 131. The document no. is generated at the time of saving but in displayed document FG shows with 131mov. type and component list with 261.
    Setting for REM are as follows
    1. control key- pp03
    2. production versions- maintained with standard REM profile
    So my question is how can i see FG material in MFBF screen along with componets list ? What is the settings for this or any development is there ?
    Regards,
    Nitin Nerkar

    Nitin,
    System behavior is not wrong. What i understand from  Backflush is, Back flushing is nothing but automatic goods issue. System will automatically posts the goods issue when you confirm the operations.You have no need to make manual issue. It will reduce the effort.
    Backflushing is automatic accounting (Goods issues - 261 mvt) of material consumed for production, at the time of confirmation.
    When you use auto goods receipt indicator then at the time of confirmation system will do auto GR. In normal discrete mfg scenario, when you are doing confirmation when you click on GOOD MOVEMENT tab you will get GI as well as GR with movement type.
    But in REM scenario you doing MFBF (REM Backflush) means This activity executes multiple activities in a single step, such as: finished product goods receipt, backflush of component materials, posting of costs to cost collector and creation of material and accounting documents. When you are doing MFBF and clicking on post with correction tab it will show you what are the components going to backflush, and that is ok. Here you are not going GOODS MOVEMENT tab to display GR.
    I think this SAP system std behavior.
    Tara

  • Mb01 101 movement type issue

    Hi
    i have try to create goods receipt with reference purchase order in mb01 t.code during save showing error update control movement type is incorrect entry (101 _ _ _ B) plz suggest.
    Regards
    Sam

    Hi!
    can you please post the error message number and type...
    have fun
    Flo
    PS: a new transaction needs not to be a challenge

Maybe you are looking for