Creation of TragetGroups in SLD

Hello ,
How to create traget groups in SLD ( PI 7.10)
Regards,
Praveen...

Hi,
This may help -
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content.htm
Regards,
Neetesh

Similar Messages

Problem in Technical System Creation Wizard in Portal SLD

Hi
When I am trying to Create New Technical System for WEB AS ABAP, I am getting the following error at the Installed Production phase
in the Portal SLD
*CIM_ERR_FAILED: Unable to execute createInstance() request, exclusive write mode is enabled*
Please help
Regards
Soumya Dasgupta

HI ,
Thank you for spend your valuable time for my problem
But my main problem is, when i am going to http://hostname:portno/sld page,
all those are not in active mode. i mean when i am selecting any function it showing sld is not configured. please do sld configuration. sld and nwdi related users are also not there in user administration. I cant understand why sld is not configured.
coz sld is configured if , we select web as java component in installation time . i dont know web as java component is selected or not. but when i am going to http://hostname:portno/ irj/portal, it showing user , content , system administration tabs . and every thing is working fine.
IN case if i did not select web as java component in installation time, may be portal also should not be configured. But here i am able to access portal. but in case of sld , it is showing error message. what is hell with sld realted problem. Please give reply.
reply will highly appreciated. Thank you.

XI installation with central SLD

Hello,
I have installed solution manger to generate key for XI installation. But, when i in stall solution manager, it installed MaxDB and local SLD and also i think WEBAS ABAP. After that i generated the key.
And, I am installing XI on the same host. There is no configuration as such i did.I tried to use the same solution manger DB, but i t failed. So i started with New DB creation. And central SLD........
Is there any configurations that i need to do to install XI with our any errors.
When i used existing SLD, is there any configuration i have to do.
More important, i have to install solution manager and XI on same host
Can anybody any issues here.
Please advice,
Srini

This should be straight forward.
If the SLD is set up for Sol Man, you enter these details on the in the installation wizard.
You will need seperate SIDs and you will need to assign the Virtual host names for each installation.
You will need to check the SLD config after install. the two sm59 conenctions - LCRSAPRFC & SAPSLDAPI, the sldapicust, the JCo Connections in Visual Admin and the SLD Data Supplier in Visual ADmin.

JCo creation

Hi experts..
I want to create a JCo destination in my portal serever but when i open the webdynpro content adminstrator the JCo creation, Maintain JCo, check SLD, start SLD are in disabled mode..
so how can i enable those things..?

Hi,
Check the following links.
SAP JCo Functions,Architecture,Applications,Installation,Client & Server Programming :
http://help.sap.com/saphelp_nw70/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/frameset.htm
Creating Jco destination:
http://help.sap.com/saphelp_nw70/helpdata/en/3a/3b1b40fcdd8f5ce10000000a155106/frameset.htm
Maintaining Jco destination:
http://help.sap.com/saphelp_nw70/helpdata/en/94/3c1b40fcdd8f5ce10000000a155106/frameset.htm
The SAP JCo Repository :
http://help.sap.com/saphelp_nw70/helpdata/en/01/43e13d82fcfb34e10000000a114084/frameset.htm
Dynamic Jco creation Blogs:
/people/anilkumar.vippagunta2/blog/2007/02/06/dynamic-jco-creation
/people/gregor.wolf3/blog/2004/09/23/from-function-module-to-jco-application--part-1-of-3
Jco Pools :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/85a483cb-0d01-0010-2990-c5168f01ce8a

Problem with SLD and Creation of JCo

Hello everyone!
I have a problem with the SLD and the Creation of JCo on the Portal, in trying to create the JCo always tells me that the name used there in the SLD, being that the facility is new.
Who performs the installation, set in the SLD the ECC 6 PRD, delete it to see if I could create a JCo but still the error again when creating the ECC 6 PRD in the SLD I said that already exists and can not create it.
I found a forum which recommended re-import the cimsap .... .... zip and zip CR_Content which would clean everything, I managed to import the zip cimsap ... but in trying to raise CR_Content gives me the following message "All incremental updates of the selected aggregate import for export SAP_CR line have already been loaded before. You require a newer import to update your current content SAP_CR version 4.11." .
I recommend, do the installation again, reload the cimsap.zip and CR_Content.zip a copy homogeneous.
from already thank you very much
Text of error to create JCo destination
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   java.lang.NullPointerException
    at at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
    at at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
    at at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
    at at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
    at at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type HTML Client
User agent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; InfoPath.1)
Version null
DOM version null
Client Type msie7
Client Type Profile ie6
ActiveX enabled
Cookies enabled
Frames enabled
Java Applets enabled
JavaScript enabled
Tables enabled
VB Script enabled
Server
Web Dynpro Runtime Vendor: SAP, build ID: 7.0017.20081210091801.0000 (release=NW04S_17_REL, buildtime=2009-01-12:09:43:27[UTC], changelist=52884, host=pwdfm114), build date: Tue Apr 28 19:28:39 CLT 2009
J2EE Engine 7.00 patchlevel 48199.450
Java VM IBM J9SE VM, version:2.2, vendor: IBM Corporation
Operating system Linux, version: 2.6.18-92.el5, architecture: amd64
Session & Other
Session Locale en
Time of Failure Fri Aug 28 11:43:53 CLT 2009 (Java Time: 1251474233677)
Web Dynpro Code Generation Infos
sap.com/tcwdtools
No information available null
sap.com/tcwddispwda
No information available null
sap.com/tcwdcorecomp
No information available null
Detailed Error Information
Detailed Exception Chain
java.lang.NullPointerException
     at com.sap.tc.webdynpro.serverimpl.wdc.sl.SystemLandscapeFactory.checkStatus(SystemLandscapeFactory.java:991)
     at com.sap.tc.webdynpro.services.sal.sl.api.WDSystemLandscape.checkStatus(WDSystemLandscape.java:469)
     at com.sap.tc.webdynpro.tools.sld.ButtonBar.onActionGoForward(ButtonBar.java:505)
     at com.sap.tc.webdynpro.tools.sld.wdp.InternalButtonBar.wdInvokeEventHandler(InternalButtonBar.java:280)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
     at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)

Hello!!
The "SLD" with which I am working up to Portal, the "ECC" installs itself as "ABAP.
Who did the installation and initial configuration, do not leave any documentation about it.
Now I need to create the systems and "JCo" necessary to enable them to implement the "ESS", but errors are presented above.
Some days ago I managed to update the CR_Content, which allowed me to create the "JCo" but at the time of the test, says' com.sap.mw.jco.JCO $ Exception: (103) RFC_ERROR_LOGON_FAILURE "name or password incorrect .
I managed to also create the portal systems, "System Administration -> System Configuration -> Content Portal" and to test it fails on "Test Connection with Connector", which as noted is associated with the connectors "JCo".
For the creation of the system, I think I should create something in the Visual Administrator ", but within the documentation that I do not see anything about it.
thanks for your help!

Regd. Sld Creation

Hi all,
I am new to sld object creation.I need to create 3 software componets and i am utterly confused!!
1. for sap system,it would be one which will have IDOC's and all sap related objects only.I will be linking the sap business system to this.
2. Another two , third party and i dont have any business systems for them , i will be using business services if required.
My queries:
1.Do i need to create 1 product only or 3,if only one ,how to should i link it to 3 s\w componets.Is it a good practice or how should it ideally be.
2.Please let me know the steps to be followed like which one to create first , pls try to answer with my requirement in mind.
thanks....

Hi Abhi,
1.Do i need to create 1 product only or 3,if only one ,how to should i link it to
3 s\w componets.Is it a good practice or how should it ideally be.
2.Please let me know the steps to be followed like which one to create first ,
pls try to answer with my requirement in mind.
This is purely a work of technical consultant .The client team and PI tech member has to sit and decide which approach to follow keeping business objectives in mind.
I guess there is no harm in creating seperate products. In your case , create one ABAP based product for SAP ( most of the cases it will be either sender or receiver in scenarios)
Create another for third party product : in fact you can go on creating products for every new vender (3rd party).
The steps would be like.. for SAP based system
create Product->SWCV->tecnical system(link ur product created earlier)->create Business system(link technical system and SWCV).
for non sap Create Product and SWCV and import in IR .. Business services you can created at your will in ID.
Regards,
Srinivas

A Doubt in Creation of Tech. System for a BW Server in SLD

Hi Experts,
I want to access BI Queries in a BW System in VC 7.1.
When I am trying to create a New Technical System in SLD of CE 7.1 Server, it is giving me the options, to Select the System Types as
1. AS ABAP
2. AS Java
3. Standalone
4. Third Party
So, Whether we need to Select the System AS ABAP or we need to Install anyother thing to get a Systems Option as ABAP.
Also, I read in a SAP Note, That we have to define the System as AS SAP_BW.
Note: BI Kit is installed in my CE 7.1 Server
Please help me to solve this issue.
Thanks in Advance.
Regards,
Palani

Hi Palani,
you don't need an SLD for configuring Bi connections. Please have a look at
http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm
how to define a BI connection for Visual Composer 7.1
Best regards
Hartmut

Buttons not enabling for JCO Creation in SLD

Hi Experts,
When i logged in into my Webdynpro Content Administrator with administrative rights, all the button like Create JCo Destination, Maintain JCo Destination and Start assigned SLD are getting disabled expect Check SLD Connection Button.
Moreover, displaying a message : "Connection to System Landscape Directory (SLD) could not be opended successfully." at the bottom of the screen.
When i click on the Check SLD Connection Button and then Test Connection, it gives again the same message i.e "Connection to System Landscape Directory (SLD) could not be opended successfully."
Now, When i click on the Check SLD Connection Button and then Start SLD, SLD server is staring and running.
Another thing is, When i am starting my sld server from logging in into http://<hostname>:<port>/sld, SERVER status is running. I stopped it and again started, then it is starting, but giving an error message as:
"Failed to send start signal for complete cluster, SLD may still be stopped on other cluster nodes."
When saving any parameters like profile information, it is not saving and saying error as:"
Cannot save profile settings CIM_ERR_FAILED: Failed to initialize cluster notification sender."
My setting are correct in SLD Data Supplier in Visual Administrator. I had filled the host/port/user/password information for both "HTTP Settings" and "CIM Client Generation Settings".
It went worked well earlier, i come across this problem recently with my sld.
Another thing that i noticed is when i click on the "CIMClient Test" button, its getting an error message saying "Failed to Generate and Test CIMOMClient Object". But, ealier it came as successfull.
I have full authorization to use admin tools.
What might be the problem.
any help must be appreciated.
regards
sunil kumar

Hi Sunil,
We just had this issue couple of days before, this has to do with the JMS Provider Authorization. We did the following steps to solve our issue:
I. Default security configuration of JMS resources is in place (this is by far the most common scenario) and named anonymous users have been created.
Change the mapping of the "clients" jms role as follows:
1. Start the Visual Admin
2. Browse the tree in the left pane
<SID> -> Server 0 -> Services -> Security Provider
3. The "Policy Configurations" tab should be selected by default on the right hand side
4. Select the "service.jms.default.authorization" node from the "Components" list (should be the nineth entry from the top down)
5. Select the "Security Roles" tab
6. Select the "clients" node from the security roles list
7. You should see on the right hand side "Security Roles" list in which the "guests" node is marked
8. Switch to edit mode by pressing the change button on top (pencil icon). The "Modify" button should now become active
9. Press the "Modify" button
10.Select the "all" entry from the "Security Roles" list. The "Groups" pane should show one entry named "Everyone"
11. Press the "Save" button
12. Restart the cluster so that JMS and applications using it can reliably reinitialize.
Check
Note 971249 - JMSServerSecurityException thrown accessing JMS resources
for more details.
Hope this helps!
Regards,
Preetha Rethinam

SLD - Error in creation of technical system

hi experts,
when we go to create a new technical system type WEB AS ABAP, the system said 'system already exists'
it exist other technical system for this system of type third party,
don't is it possible have together?
very thanks,

Hi,
The problem is due to whatever technical system your are trying to create those details are already contain another technical system name in SLD. We can't create more then one technical system with same parameters. Better to use existing technical system or delete existing one create new one.

Technical system creation problem in SLD

hi
while i'm traying to create a technical system for Web As ABAP(ERP 2004 ECC 5.0) in SLD when I serch for Installed product no product with ECC 5.0 is found.
is there somthing missing ?
regards,
kinjal

HI kinjal
i think UR J2EE server patch level is SP9.
do u read the SLD configuration document carefully?
look at sap note 669669. and import the CR Content according to that. this solves ur issue.
regards,
kaushal

Creation of business and technical systems for sld

hi
can any one help me out, to creation of technical and business system for system landscape directory ....give me detailed instructions.
this is urgent requirement
regds
venky

Hi pervalli,
plz look to
http://help.sap.com/saphelp_nw04/helpdata/de/31/f0ff69551e4f259fdad799a229363e/frameset.htm
Regards,
Udo

Technical system creation in SLD

Hi,
1. I have installed Netweaver sneak preview-java edition.
2. I am trying to create a new technical system for WebAS ABAP. We are on ECC 5.0 .
3. I have imported Cimsap.zip and content.zip successfully.
4. Now in the screen "Technical system wizard-software products and components" under "Available products" section i am not finding an entry fo ECC5.0. Here what system name should i select to proceed further.
Do i need to make any entry in host and services files, or anything else i have to do?
Regards,
Kumar.

You will probably achieve the same result if you were to use SAP R/3 4.7 Try using it instead, see if it works. I think that it will.
Regards,
Rich Heilman

Error in Jcos creation

Hi all,
I am getting an error in Jcos creation.This is tyhe error I am facing.I checked evrything.Evrything seems ok.But i am getting the belwo error.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=zimssap GROUP=PUBLIC R3NAME=PRD MSSERV=sapmsPRD PCS=1 ERROR timeout while pending for route completion TIME Tue Jan 06 20:21:50 2009 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -12 DETAIL NiErrSet COUNTER 1
I configured sld so many times but never faced this issue.Some starnge error .Timeout oending for route completion.Please let me know what could be the problem?
Thanks and reagrds,
Rajesh

Hi
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION:
RFC_ERROR_COMMUNICATION | Unknown host
RFC_ERROR_COMMUNICATION - time out
Thanks,
Tulasi

Error in JCo Connection creation

Hi All,
When I create a JCo connection on my local J2EE it fails with the error enclosed as below:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=frces4066 GROUP=PUBLIC R3NAME=AM1 MSSERV=sapmsAM1 PCS=1 ERROR partner not reached (host frces4066, service sapmsAM1) TIME Mon Apr 03 18:44:33 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -10 MODULE nixxi_r.cpp LINE 8596 DETAIL NiPConnect2 SYSTEM CALL SiPeekPendConn ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
When I try and ping the JCo the error is as enclosed below:
Failed to ping JCo destination WD_COMMITMENT_MODELDATA_DEST
I have maintained the enteries in hosts file as well as the services file and when I telnet the server on port 36XX where XX is the system number of the system I create the JCo for it connects successfully.
When I test the CIM test for the SLD that connects successfully.
Where and why is the JCo failing after creation?
Can someone throw some light on this error.
Thanks in advance for all your help.
Best regards,
Divya

Hi All,
Anyone can help? I got the same problem. It seems that the PUBLIC group in NSP ABAP system can't not be accessed.
Here is my system landscape:
- I have installed the Java and ABAP in the same host
- My ABAP system is NW2004sSneakPreviewABAP, Java is SAPNetWeaver04_SP16Preview
1) I set up SLD successfully (import CIM, run RZ70, the ABAP system shown up in the Technical Landscape in SLD
2) I created JCO destination with Load Balancing but it failed to ping and to test
3) I already define the group 'PUBLIC' in tx SMLG but from SAPGUI I can't add the group. I got the error message "Message Sever could not find any group".
4) The PUBLIC group does not show if I run the program 'lgtst'.
Test lgtst:
===========
c:\usr\sap\NSP\SYS\exe\nuc\NTI386>lgtst.exe -H hpxp2 -S sapmsNSPusing trcfile: dev_lg
list of reachable application servers
[hpxp2_NSP_00] [hpxp2] [10.10.0.10] [sapdp00] [3200] [DIA UPD ENQ BTC SPO ICM ]
c:\usr\sap\NSP\SYS\exe\nuc\NTI386>lgtst.exe -H hpxp2 -S 3600
using trcfile: dev_lg
list of reachable application servers
[hpxp2_NSP_00] [hpxp2] [10.10.0.10] [sapdp00] [3200] [DIA UPD ENQ BTC SPO ICM ]
James

Deletion and creation of Configuration Objects using JAVA Transports

Hi Guys
I hope you guys can help me make some sense out this situation.
We have 2 systems in the QA Landscape which shares the Integration Server, Lets call it SYS.A1 and SYS.A2. In the SLD both SYS.A1 and SYS.A2 have the transport track pointing to SYS.PROD as the Production Environment. In QA env. we have 2 receiver determination for these 2 systems. This means in the PROD Environment we will have One object(Receiver Determination) which represents connections from these 2 systems in the QA Environment. (In prod we have one system which represents both the system in QA).
Recently there was a transport that came in from the QA env to PROD which contained a deletion of the receiver determination for SYS.A1 and modification of receiver determination for SYS.A2. So by the end of the transport we expected to see a modified receiver determination for the PROD environment, but what we found was the object that was there in PROD was deleted and nothing was modified.
So Can you please tell me what the transport sequence is? is there a priority given to deletion over creation? Or is there some kind of versioning applied for Directory Object transport?
I read from the forum that there is some sort of versioning applied on repository transport.. is it the same case here??? Any help in explaining this would be much appreciated.
Thanks & Regards
Prav

I have to remove the monthly spread sheet every time
and create a new spread sheet while executing the
code. The problem is when I run the code the records
inserted into same spread sheet along with the
previous records. So I need to delete the excel file
and create new one. I am using POI to create the
spread sheet. ICan anyone help me on this? I am
posting the code below.I don't think I want to read all that code. If you want to replace the data, you can remove the sheet and create a new one with the same name. HSSFWorkBook has methods removeSheetAt() and createSheet().

Creation of TragetGroups in SLD

Similar Messages

Maybe you are looking for