Creation of Transfer Order takes a long time and finally throws spool error

Hi,
I create Sales Order of type OR. I do delivery successfully. But when i proceed to create Transfer Order, it takes painfully long time and finally after painful 30 mins or so, it throws a error message, 'Error in spool call' with a blank page. I click on save icon and transfer order is created.
But the creation takes very long time. I checked SP01 and there are no requests.
Any suggestions will be rewarded.
Regards,
Mangesh

Dear,
Kindly contact your Basis team it will help you.
After error please take the screen short of SU53 and give to basis team.
May be it will help you.
Regards,
Sandip

Similar Messages

I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted

I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted.
is there a way to stop it in the middle so it does not go through the whole process

It's called, "FileVault." If there is no option to stop the process, then the best bet would be to wait until decrypting is finished. Otherwise you run the risk of borking the whole thing. It's hard to imagine how you can accidentally turn off FileVault.

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X 8 from internet, is there any where can I get offline download of OS.

My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.

Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed.

Installing the printer takes a long time and then the installation fails

Installing the printer takes a long time to complete installation and although I used Genuine disk and a new printer
System Windows 8
Please help
Is there could be missing from the file system
How to Get it

Hi,
What is your printer model?
Do you try installing it via USB or through the network?
Does the installation stalls or hangs before or after selecting the crequired connection type for the printer?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Validate map in FDM takes long time and finally expires

Hi,
I have an issue with FDM Mapping.
When i click the "validate" option in workflow, the FDM processing takes long time (more than an hour) and finally expires.
But when i open a new web interface, i am seeing a gold fish on validate - which means validate mapping has been done.
As we are in production environmeny, Can someone quickly clarify me, why this happen.
Thanks,
Siva

Hello Kelly,
Something you said concerns me: +"Because we automated data loads for the large file, this issue is extremely low on the priority list."+
In this type of scenario we notice customers/partners implementing FDM as an 'ETL' utility. FDM is not an ETL utility and should not be treated/used as such. In the event that you are doing this, Support has no control of the application as it is a mis-use of what FDM is for.
Files that are being pushed into FDM should always be broken down into the smallest components(locations) and used as a 'front end,' user interface.... not a server-side/IT application. If you meet this criteria of FDM, then there is not much Support can do.
If you do not think you are misusing FDM, I would highly suggest you open/create a Support SR if you do not use FDM in that manor. Consultants/Partners are functional/design based.... and not necessarily trained as Support Engineers. Therefore they might not have the skills required to make such determinations.
Thank you,
Oracle Global Customer Support

Query takes very long time and analyze table hangs

Hi
One of the oracle query taking very long time (ie more than a day) and affecting business requirment of getting the report in time.
I tried to analyze the table with compute statistics option, however it hangs/runs forever on one of the huge table?
Please let me know how to troubleshoot this issue

Hi,
What's your Oracle version?
You should use DBMS_STATS package not ANALYZE..
Regards,

WE05 takes a long time and ended with error message: time out

Hello,
When user trying to use WE05 transaction it takes more time and ended with error message time out.In the WE05 tranaction even i tried with minimal search options(like for just 2hrs duration,for one day) still getting the same error.I think there must be problem in EDIDC table.
Please suggest solution for this????
Regards,
Loki.

You have to enter the selection ctiteria on WE05, might be there is a huge data on these tables. So the best option is to enter the selection criteria as much as you can to get the IDOC list. Also check the sie of EDIDC table and analyse the number of IDOC on that table. Make sure that index are updated of the table
Regards,
Subhash

KE30 Report:-Takes very long time and ends in a Run time error

Hi Expert,
Since last three week (after up gradation of system) we are not able to run any of KE30 reports in Production system and its end with Run Time Error. Even in development system where data is minimum it is taking 45 Minutes to give output where it should take maximum 4-5 Minute. Before up gradation it was working fine
What could be the reason for this and how can i resolve this.
Thanks in Advance
Bipin Tiwari

HI Sridhara
Thanks for quick response. After Up Gradation we ran SGEN T-code but no impact on system performance. There after we build new summarisation level in KEDVP (system proposed) and activated it but still it is taking 30-.35 minute to generate the report in Development system which should normaly take 1-2 Munite.
Can you suggest what else we can do or is there any better way for build summarisation level in given scenario.
Best Regards
Bipin Tiwari

I have an old iPod Classic that still works fine but it is having difficulty establishing a connection to my computer. It will make an incomplete connection but it takes a long time and the computer hangs up until the connection is made. iTunes can't see

I have an old iPod Classic. It still plays the music on it out of either port. It is having trouble connecting to my Windows 7 (64bit) computer. It takes about 30 seconds or more to connect and hangs the computer until it does. Even though it shows up in connected USB devices and in Windows explorer it doesn't seem right. Sometimes it does not make a connection and when it does make a connection iTunes cannot detect it, even though iTunes sometimes automatically launches when I plug in the iPod. I've tried two different sets of cables with the same results.

Check the iPod Hardisk health with the iPod Disk Diagnostic, as posted by tt2
https://discussions.apple.com/message/17776595#17776595
It wont fix your problem, but may tell help troubleshoot, why it is freezing iTunes, especially when the Pending and Realloc numbers are high.
have a nice day!

Time machine takes very long time and does not finish the backup

Hi,
Time machine is unable to backup my 2014 Mackbook Air 128 GB Drive anymore.
I have tried numerously to initiate a backup but it could only backup a very small volume, less than 1KB, then stall for hours without any progress.
I tries to repair my volume, using the Disk Utility, but it still does not backup, except for the 1K progress.
I have noticed that "Spot Light" indexing is also taking forever. It has been indexing for days without any pogress.
What is going on.
What should I do to fix it.
My latest successful backup was on Jul 25.
Please help.
Thanks.
Tareq

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

When I search, it takes a long time and then I get a connection time out error. What do I do?

error: cannot communicate with bing.com (204.152.194.204)

Bring up System Preferences and look at the bottom of the window. If there is software listed there, make sure you have the latest version that runs on OS X 10.7 Lion. Then go into users and look at login items. Same thing, ensure that any software listed there is at a level to run with OS X 10.7 Lion.
While Lion has a minimum requirement of 2GB of memory, 4GB is recommended.

My laptop seemed to be frozen and I could not shut down from the menu. I held the power button for a long time and finally it shut off. When I started it again it turned on to show a black screen with an icon of a file folder with a question mark inside

Any idea what a blank screen with a flashing folder with a question mark inside of it means???

Ambinder55,
it means that the forced shutdown corrupted some portion of the internal disk’s filesystem. Which version of OS X is installed on your MacBook Pro?

Query takes a long time

Hi,
I have a simple query that takes a long time and sometimes hangs. I want to know if there are any orders that were shipped but are not in the ra_interface_lines_all table for one reason or another. The query is
select source_header_number from wsh_delivery_details
where inv_interfaced_flag = 'Y'
and released_status = 'C'
and oe_interfaced_flag = 'Y'
and creation_date > 'DD-MON=YYYY'
and source_header_number not in (select interface_line_attribute1 from
ra_interface_lines_all
where ship_date_actual >'DD-MON-YYYY')
Thanks
A/A

Follow the thread posted to generate an execution plan. Ideally you run your statement with SQL tracing enabled and run the tkprof utility on the trace file generated as outlined in the thread.
Without further information it's just guess-work. And by the way, as already mentioned, use the TO_DATE function for DATE type literals or use the ANSI DATE literal format: DATE 'YYYY-MM-DD', otherwise you are depending on the NLS settings of the client executing the query. So:
Could you please post an properly formatted explain plan output using DBMS_XPLAN.DISPLAY including the "Predicate Information" section below the plan to provide more details regarding your statement. Please use the \[code\] and \[code\] tags to enhance readability of the output provided:
In SQL*Plus:
SET LINESIZE 130
EXPLAIN PLAN FOR <your statement>;
SELECT * FROM TABLE(DBMS_XPLAN.DISPLAY);Note that the package DBMS_XPLAN.DISPLAY is only available from 9i on.
In previous versions you could run the following in SQL*Plus (on the server) instead:
@?/rdbms/admin/utlxplsA different approach in SQL*Plus:
SET AUTOTRACE ON EXPLAIN
<run your statement>;will also show the execution plan.
In order to get a better understanding where your statement spends the time you might want to turn on SQL trace as described here:
[When your query takes too long|http://forums.oracle.com/forums/thread.jspa?threadID=501834]
and post the "tkprof" output here, too.
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/
Edited by: Randolf Geist on Sep 23, 2008 4:08 PM
Added DATE type caveat

Sometimes an e-mail will take a long time to open

Not all my e-mails open immediately. Some of them take a long time and I have to keep going back to them or wait until the next day.
All my e-mails don't do this. Just some.

I use ccleaner on a regular basis.
That may be one of your problems - apps that claim to 'clean your Mac' usually do more harm than good.
If I were you, I would try a 'fresh' installation of OS X. Simply boot into your Recovery partition (holding down the Command and R keys whilst booting), use Disk Utility to verify and repair Permissions and the use it to verify your hard drive and then install OS X anew. If you don't erase your hard drive, none of your data will be deleted (although it's always best to have a backup, of course).
If the fresh install doesn't 'fix' things, I would just start all over again - erasing your drive and reinstalling everything.
And stay away frorm CCCleaner, etc.
Clinton

Automatic creation of Transfer order for Picking and putaway

Hello All .
I would appreciate if someone can explain the process of configuring Automatic creation of Transfer order for Picking ( outbound delivery)and putaway( inbound delivery) .
thanks
Rahul

Hi
To have transfer orders created automatically in the background, you must first set the indicator Automatic transfer order creation for each respective movement type in the Customizing application for Warehouse Management under the path <b>Activities - Transfers - Define Movement Types</b>. The system automatically copies this indicator into the header item of the source document.
For more information on how to set up automatic transfer order creation for transfer requirements and posting change notices, refer to the IMG for Warehouse Management under the path <b>Activities - Transfers- Set up Autom</b>. TO Creation for TR/Posting Change Notices.
You can find more details on this link
http://help.sap.com/saphelp_47x200/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
Thanks & Regards
Kishore

Creation of Transfer Order takes a long time and finally throws spool error

Similar Messages

Maybe you are looking for