Creation of trusted RFCs between two systems

Hai,
Can anyone help me to create TRUSTED RFC between two systems ie Solution Manager and the Production. To carry out Service desk facility.

Dear Mohan,
You can create RFC's in the Solution manager system using T-Code SMSY. there you find all your installed systems select the system from the left hand side under Landscape Components click on Application Server ABAP on the right hand side you will find a tab client in this screen select the client for which you want to create TRFC. Go to change mode and click on the button Generate RFC with Assistance. Carry out the wizard for creating the RFC's...

Similar Messages

How to Transport G/L Accounts between two systems?

Hi,
I am trying to move the Chart Of Accounts along with Company dependent data from our Dev to QA system. I used transaction OBY9 to transport the chart of accounts however, it is only transporting chart of accounts related data and I had to re-create those accounts in Company Code.
I also tried to use FS15 and FS16 between two systems however, no luck. Could you please provide any guidance based on your experience?
Thanks,
Durgesh.

Hi John,
For activating ALE for a particular message type there are following prerequisites:
1. Set up the RFC Connection (ABAP) between two systems
2. Configure model view in Sender system
3. Distribute Model view from sender system
4. Generate partner profile from sender system (In sender system go to tcode WE20 go to partner type LS and maintain outbound parameter for message type GLMAST)
5. In receiving system go to tcode WE20 go to partner type LS and maintain Inbound parameter --> Message type GLMAST and Process code GLMA.
Save entries and the above should work for you.
Generate IDOC for one GL Account and try to send company code date for one company code first. The message will appear which says "one idoc transferred".
Regards
Kapil

How to check the Network Connectivity between two systems.

Hello Everyone,
Please let me know different ways to check the network connectivity between two systems other than ping/traceroute commands.
Thank You.
Edited by: 835435 on Jan 20, 2012 11:43 AM
Edited by: 835435 on Jan 20, 2012 11:44 AM

Use snoop.
snoop -d <nic> - will give requests and replies coming/going in/out of the specified NIC.
snoop -d <nic> <MAC address of the target host> - will give requests coming from the required host.

Trusted RFC for two managed systems where SID is identical

Hi
I fall into strange situation, We have maintenance landscape & project landscape where SIDs are same for D & Q Systems.
Now I am trying to setup System Monitoring & EWA etc from Solution manager, I cant create Trust Relationship between the solution manager & managed system where SID is same.
This is not about defining system in SMSY.
Any help is appreciated.
Thanks
Rakesh

Hello,
If the SID's are under different installation numbers then this should be fine. If they are under the same installation number, how can Solution Manager tell the difference between the systems, and know which system to trust? They become identical entities if they share the same installation number and SID.
I hope this helps.
Regards,
Paul

Automatic creation of transportation lane between two Plants or location

Hi,
I am aware that when we cif Inforecords from R/3 to APO new transportation lanes automatically gets created between the Plant and Vendor.
The isssue which i am facing is that i want transportation lanes to be created between two plants . The TL should be created automatically. I could find the below details from sap help.
http://help.sap.com/saphelp_scm41/helpdata/EN/3e/dfaf376ed96c21e10000009b38f8cf/frameset.htm
Transportation Lanes with Reference to R/3 Material Master Record
Storing a special procurement type with procurement type F: External Procurement and special procurement U: Stock Transfer (in the MRP 2 view of the R/3 material master record), means that the material has to be procured externally from another plant (supplying plant) or transferred from another plant.
To also be able to perform stock transfers for this material in the SAP APO system, there has to be a transportation lane from the supplying plant to the receiving plant. If you have transferred a material with this special procurement type from the SAP R/3 system, the SAP APO system automatically creates a corresponding transportation lane from the supplying plant to the receiving plant for the supplying plant (from the special procurement type) and material/plant combination. The transportation lane is given the creation indicator u201CSu201D for special procurement.
I am not able to make sense of special procurement U: Stock Transfer (in the MRP 2 view of the R/3 material master record),
Is this Special procurement some sort of customization as i could not find U: Stock Transfer in my implementation.
Please help me understand this. What exactly should i do to create TL between Plants automaticcaly through Cif.

You need to define setting in IMG for this from source to Target location.
Follow this path :
Production->Material Requirements ->Master Data->Define Special Procurement Type
example :
Plant      1004
SP type    40   Stock transfer (proc.from alter.plant)
Procurement type     F    External procurement
Special procurement U    Stock transfer
Plant                1039
Manish

Creation of Trusted RFC fails

Hello
I am trying to connect my ERP and BW systems to Solution Manager but I can't make Trusted RFC connections.
When I checked SM59 on three systems I see `You are not authorized to logon to the target system (error code 1)
I did successfully installed Solution Manager, did initial and basic settings. I created SOLMAN_ADMIN user every system assigned it SAP_ALL, SAP_NEW and created a role with S_RFCACL authorization object, (I assigned full authorization on all objects on that role). I did add IP numbers and hostnames to hosts file but still same. When I test connection I get success but authorization check always fails.
I both tried from SOLMAN_SETUP > Managed Systems and also after clearing all RFCs and trusted system entries from SMT1 and SMT2, I added RFCs from SMSY but I get same results.
Side note, all servers are in the same subnet but Solution Manager server belongs to different domain.
My main reason to implement trusted rfc is I need to implement ServiceDesk and I have to test it before going live, so all data on Solution Manager is expendable.
My systems are
ERP: Windows 2003 R2 x64, SQL 2005 SP3, ERP EHP4 SP5
BW: Windows 2003 R2 x64, SQL 2008 SP1, NW 7.0 EHP2 SP6
Solman: Windows 2003 R2, SQL 2008 SP1, EHP1 SP7
What am I doing wrong there?

Hello,
Are you letting the wizard create the RFC's for you?
On the Client tab in SMSY?
Also you assigned S_RFCACL what about S_RFC?
I would ask you to check the logon tab and make sure Current user is not checked.
Also, please review this Note 128447 - Trusted/trusting systems
This should help resolve.
Regards,
Paul

How to check whether transport path exist between two systems in sld??

Hi,
I have two systems namely 'A' and 'B' and created business systems for both of them.Then i created transport path between the two systems.How i check whether what i have done is right in SLD.

<b>WRT to CMS</b>
am not sure with this but u can try:
1. Start CMS: http://<host>:<J2EE Engine http port>/webdynpro/dispatcher/sap.com/tcSLCMS~WebUI/Cms.
2. Goto lansdscape configurator and check there
Message was edited by:
Prabhu S

Can we use ALE to send purchase requisition between two systems?

Dear Gurus,
Can we use ALE to send Purchase Requisition between two R/3 systems?
Source system is A. Target system is B. Target system B is the customer of A.
When A wants Material, it will check the availability.
If available, it will create Reservation.
If not available, it will create PR and send it to Target system B. Since B is a customer of A, B will, in turn, create PO and send it to its Vendors.
We plan to use ALE/IDoc. I tried to find out the message type for PR. But it's not available.
Can anyone suggest me how to do that?
Thanks & Regards,
Neeraj K.

Hello,
The technical answer is yes. You could use the message PREQCR / PREQCR01 or PREQCR02 for your requirement of transferring Purchase Request via ALE. Since I am not a process expert, it would not be possible for me to comment on your process needs.
Please let me know if you have further technical queries.
Hope this helps,
Best Regards, Murugesh AS

How to do the version comparision in Smart Forms between two Systems

Hi Frnds,
How to do the version comparision in Smartforms between two servers.
Thanks in Advance.
Ravi

hi
u can nt do version comparision for a smartform between 2 servers. im sure. u can only compare manuallly
reward points if useful.

RFC BETWEEN TWO CLIENTS IN DEVELOPMENT

hi everyone,
here connection is already exists in between two clients(development) now i have to transfer ztable from client 1 to client2.
if any body have the steps and code please guide me.
Best regards,
Sunil

Hi,
Log on to your destination client (where the form doesn't yet exist).
Transaction SE71, menu option Utilities -> Copy from Client.
Fill in the name of the form, the client number where it already exists, and the name of the copy (it can be the same of different to the existing form).
Execute.
This will prompt for a package for your new form, which can be different to the original.
Job done.
Regards,
Nick

How to keep mails synchronized between two systems?

Hello,
I have a home iMac and will soon need to have a portable for occasions when I'm away from home.
I suppose it would be easy to ensure identical environments by booting the portable system on a clone of the system disk of the home iMac.
However, the next question is: how to keep the two systems synchronized and, especially, how to keep the mails stored on the two systems synchronized? I'm looking for a solution for this problem. What are the options offered by Mountain Lion to do this?
Thanks for any hints or tips,
Denis.

Although not free, perhaps this program might do what you want.
Folder Synchronizer

Migrate one application role between two systems (keeping guid)

Hi
I know there are ways to migrate the whole policy-store from one environment to another. On the other hand there is a tool to create application roles via command line.
I have only a set of application roles which I want to move to another environment. The guid should stay identical so that the application roles get automatically applied on the copied catalog.
Does anybody know if that is also possible? I need to keep the guid but don't want to migrate the whole policy store.
Thank you

user12068228 wrote:
Hi
I know there are ways to migrate the whole policy-store from one environment to another. On the other hand there is a tool to create application roles via command line.Yes, you can create application roles via WLST. Below are the commands:
connect(“Enter Weblogic's Username Here”,”Enter Password Here″,”Hostname:PortNumber″)
createAppRole(“Enter Applicationstripe Here”,”Enter Role Name here”)
P.S: The Application stripe name is obi for the OBIEE set of roles.
I have only a set of application roles which I want to move to another environment. The guid should stay identical so that the application roles get automatically applied on the copied catalog.If I am not wrong, Althought the GUID's can be different after the migration of the application roles between environments, the permissions still stay the same. and I believe the GUID's are system dependent and might be different across two instances. Correct me if I am wrong here.
Does anybody know if that is also possible? I need to keep the guid but don't want to migrate the whole policy store.
Thank you

Data transfer (Export & Import) of Delta Queue between two system.

We are planning to implement the following senario for a certain R/3 and BW system.
1. Implement storage snap shot copy solution for R/3 database and create replicated system of production R/3 every day in order to avoid load of production R/3 to BW directly. That is to say, we will extract business data from the replicated R/3 system and forward to BW.
2. We need to utilize Delta Queue function in order to feed the only gap data between production R/3 and BW. but as stated in 1. the source data will be replicated from the production R/3 every day and so we could not keep the Delta Queue data in R/3.
3. So, we are examining the following method in order to keep the Delta Data in the replicated R/3 system. i,e after feeding business data from the replicated R/3 to BW, we will extract the following Delta Queue table and keep it.
- TRFCQOUT (Client Dependent pointer table per queue name and destination.
- ARFCSSTATE: Likn between TRFCQOUT and ARFCSDARA
- ARFCSDATA: Compressed data for tRFC/qRFC
And then, next day, after replicating R/3 system, we will import those Delta data to the replicated R/3 system before stating extract business data and feed to BW.
Is the such method realistic? if not, is there any alternative?
Please advice!
Best regards,

I found the following document and this is one that I want to inplement.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d51aa90-0201-0010-749e-d6b993c7a0d6
Additionaly, I want to execute this senario repeatedly. Does someone have experience such implementation?
Eguchi.

Last changed date different between two systems after transport

Hi, first of all, I am not from basis background and just want to make sure whether is this something correct or not.
I found that the "Last changed date" and "username" are not same between the original system and the target system. Is this something configurable?
And the "username" field is totally empty. However, the program code's version is identical in both systems.

I think I misunderstood your question. You are referring to the system Transports not the connections between systems. If the Transports are not transferring all the contents, you really should talk to your basis folks and tell them which items are not being reproduced correctly.
Regards,
Mike

Trusted authentication from two systems to BOXI

Hi,
We have a system that currently uses trusted authentication to direct users to infoView. Is it an option for us to use trusted authentication from SharePoint to BOXI at the same time? BOXI 3.1 SP5.
Thanks,
Sam

Hi Sam,
Looks like this is possible. Please refer
http://help.sap.com/businessobject/product_guides/boexir31SP4/en/xi31_sp4_ivforsp_admin_en.pdf
I can see tags related to trusted authentication in the guide.
Hope it helps.
Regards
Chinmaya

Creation of trusted RFCs between two systems

Similar Messages

Maybe you are looking for