Creation profile based schedule lines

Dear all,
I release the Forcasting schedules based on the creation profile assign to the Scheduling agreement (Lpa)
In the creation profiel i have maintained the Aggegation horizon as 0-60 (days), 60-90(weeks) and 60-999 (months).
after release when i checked the schedules the aggegation is not properly.
how system caculated the the aggegation whether it consider the working day only or calender days
2. what is mean by creation indicator -R ( real time) B - mrp driven

Hi,
It depends upon the Planning Calendar specified in Creation profile customization.
R- Realtime means using ME38
MRP driven is self explanatory and are created by MRP when the source is fixed in sourcelist and MRP indicator maintained.
Hope this helps.

Similar Messages

Creation Profile in Scheduling Agreement and Schedule LIne

Dear Experts,
Currently I'm working on Scheduling Agreement and Schedule Line.In standard SAP gives the provision of creation profile.I've gone through the SAP help documentation but I'm not clear on that.I've few doubts on creation profile.
1. I've created a profile say XXXX for 14 days JIT and 6 months Forecast.And I maintain the same on Scheduling Agreement additional data.
2.I'm creating delivery schedule respect ot Scheduling agrrement.
3. I maintain the aggregation horiozon in creation profile as 10 days daily aggregation for JIT and 120 days for monthly aggregation for forecast.
4.I run MRP for the header material and I maintain the necessary SA number in Source list.
5. After MRP run I'm not getting the respective schedule lines for JIT and Forecast.
6. What is the use of creation profile in Scheduling Agrrement and schedule line and is it determine ant schedule lines after MRP run.
Please clarify me on creaion profile.
Thanks in advance
PKB

Dear Experts,
I'm not getting any response regarding Creation profile which I posted last week.
Can anybody explain me the use of Creation profile in Schedule line?
From Standard SAP help documentation I'm not convince.
Best Regards
PKB

Creation Profile in Scheduling Agreement

Dear Experts,
Currently I'm working on Scheduling Agreement and Schedule Line.In standard SAP gives the provision of creation profile.I've gone through the SAP help documentation but I'm not clear on that.I've few doubts on creation profile.
1. I've created a profile say XXXX for 14 days JIT and 6 months Forecast.And I maintain the same on Scheduling Agreement additional data.
2.I'm creating delivery schedule respect ot Scheduling agrrement.
3. I maintain the aggregation horiozon in creation profile as 10 days daily aggregation for JIT and 120 days for monthly aggregation for forecast.
4.I run MRP for the header material and I maintain the necessary SA number in Source list.
5. After MRP run I'm not getting the respective schedule lines for JIT and Forecast.
6. What is the use of creation profile in Scheduling Agrrement and schedule line and is it determine ant schedule lines after MRP run.
Please clarify me on creaion profile.
Thanks in advance
PKB

Dear Experts,
I'm not getting any response regarding Creation profile which I posted last week.
Can anybody explain me the use of Creation profile in Schedule line?
From Standard SAP help documentation I'm not convince.
Best Regards
PKB

Mandatory creation profile on scheduling agreements

Hello Gurus,
I need to put a value on creation profile field on schedulling agreements. I have to choices:
- Put the value on supplier data. It is a plant-dependant value i my client doesn't want to create this data.
- Made it mandatory. This possibility doesn't appear through Scheduling Agreement -> Define Screen Layout at Document Level as usual in fields on Purchase docs.
Anyone has an idea how made it mandatory (or de badi to change the value by code)
Best regards,
Nacho

Dear Experts,
I'm not getting any response regarding Creation profile which I posted last week.
Can anybody explain me the use of Creation profile in Schedule line?
From Standard SAP help documentation I'm not convince.
Best Regards
PKB

Where is the field release creation profile in scheduling agreement?

Dear experts,
I need to maintain release creation profile in Scheduling Agreement.
please let me know where can I find this field in ME31L
Regards,
Shashidhar

Found in More functions - Item details

MRP - Auto creation of del schedule lines based on planned delivery time

Hi,
We have activated MRP (type PD) where Purchase requiesition is auto created by system for requirement quantity. We require to optimize delivery schedule in such a way that entire PR quantity is broken into various delivery schedule based on planned delivery time and requirement. Scenario can be further explained with following example.
Material Requirement for a month is say 1,25,000 units
Closing Stock say 25,000 units
PR Generated by system for 1,00,000 units. The entire quantity is schdulled with only one delivery schedule line as per planned delivery time.
The requirement is to generate multiple delivery schedule lines automatically in Purchase requisition based on planned delivery time so that Purchase orders can be placed with system generated delivery schedule lines.
How can it be achieved ?
Regards,
Nirav Kinkhabwala

Nirav,
This subject has been discussed repeatedly in this and other forums. I must assume that you overlooked the rules of engagement, which state that you should first search the forums and other public sites, before posting questions here.
Standard SAP MRP cannot be made to generate multiple items in a Purchase requisition. The functionality you seek is usually achieved when converting purchase reqs to Purchase orders, where many single purchase reqs can be adopted into a single Purchase order.
You also might want to investigate use of Vendor Scheduling agreements.
Best Regards,
DB49

Issue on Purchase order creation with Delivery schedule line items per PR

Hi
Note->Developed inbound FM to create PO's in SAP through IDOC.
We are creating purchase orders from vendor which is coming from Inbound IDOC. Here we are using as BAPI_PO_CREATE1
to create PO's. before that i am passing all the inbound data of the IDOC and getting some Purchase requisions for plant and material wise from EBAN table where we have open PR's and split the inbound line item qauntity as per Open quantity in Purchase requisions. Problem here we are modifing schdule line data as per purcahse requisitions and post the all the shehduline data into above functional module, we are using creation date as delivery date in the scheduling line for each line.
Set1- If we have multiple requisions for each material and plant in the inbound IDOC item , while creating PO using above BAPI
creating PO with delivery date is taken from Purchase requesion date, this only will happend in the first schudle line item always, second line scheulde has taken correctly from creation data as delivery date.
Set2-If we have one requisition for each line item, it will creating correctly for schulding line item as with correct delivery , whcih is not taken from requstion delivery date.
Set 2 is working correctly, but Set1 has problem with delivery date in the scheduling lines particulary for first schduling line item.
Please help me on this issue.
Advance wishes

Hi Satish
Thanks for the reply.
I checked the parameters and it is creating 2 PO when the Indicator Ordering address is set.If I uncheck this Indicator then only one PO is created.
But now my question is from where is the Ordering address taken because for both line items Vendor is same and ordering address is also same.
Then why the system is creating new PO?
Regards
Vaibhav Mahajan

Creation date for schedule line

Hi All,
I have a scheduling agreement. MRP is generating the schedule lines properly. I want to know any table or any other way by which I can check the creation date for those MRP generated schedule lines.
Regards,
MHP.

Dear Manish,
As per my understanding from your question, you can use 'MD04-Stock/Requirement List' transaction for checking all the dates for planned order generated from MRP run.
Regards,
Hiren Ramani

Creation of muliple schedule lines in CRM 5.0 Quotation

Hello all,
We are implementing CRM 5.0. In quotations, whenever I try to create more than one schedule line, I get an error saying that only one schedule line is allowed. However, I may have a scenario where customer says that out of total 100 tonnes, he wants 25 tonnes on a particular date and 75 tonnes on a later date. How do I ensure this? Help will be greatly appreciated.
Thanks,
Sumedh

Hello Sumedh,
What is the full error message text? message ID?
As I tested in a system, which seems to be okay to create more than one schedule line.
I only managed to find one error message:
CRM_SCHEDLIN_I 312
Only one schedule line per item is possible for configurable products
If your case is for configurable products, then this is standard behaviour, was introduced by note 608860.
Regards,
Message was edited by:
SAP Fans

Significance of release creation profile

Hi all,
Can anyone explain with example the use and significance of release creation profiles in outline aggrement
Thnks
Gan

Hi,
Release Creation Profile
Use: -
The creation profile determines:
- Which event triggers the creation of a scheduling agreement release (changes involving the lines of the overall schedule and/or the reaching of the next transmission date)
- How the delivery dates are shown (aggregation and release horizon)
- Whether
Backlogs and Immediate Requirements are determined and shown in the scheduling agreement (SA) release Whether a tolerance check is carried out for SA releases that are created due to changes to the overall delivery schedule in the system
Note: -
The tolerance check is only carried out if lines of the overall schedule for an item have been changed and if you create SA releases using the release creation program (via Scheduling agreement ® Create SA release).
Features: -
A creation profile is defined on a plant-dependent basis and consists of the following areas:
General parameters: -
- Whether - and, if so, under what conditions - an SA release is generated (creation strategy).
- Whether backlogs and immediate requirements are to be determined for the SA release type.
- Whether or not the tolerance check is to be deactivated in the case of change documents created for SA releases with backlogs.
Aggregation horizons: -
- The Release Horizon for which released quantities are shown, and
- The periods for which quantities may be aggregated.
If your creation profile provides for aggregation, quantities and delivery dates set out in the lines of the overall delivery schedule stored in the system for a scheduling agreement are aggregated to form release schedule lines.
If you use a creation profile without aggregation, or work without a creation profile, the schedule lines of the SA release correspond to the schedule lines of the overall delivery schedule for the scheduling agreement for the relevant period.
Creation periodicity: -
- Whether SA releases are to be created on a periodic basis (and, if so, at which frequency).
Each time a scheduling agreement release is created, the system calculates the next creation date. Weekly and monthly releases are always created on a Monday (first workday of the period). The system takes the factory calendar as the basis for calculating the due dates for release creation.
If you wish to create SA releases on a periodic basis, you should choose a creation strategy that includes Next date.
Tolerance profile: -
- Whether tolerances are are to be checked for scheduling agreement releases created as a result of changes to the overall delivery schedule. This allows you to specify that SA releases are only to be created following major changes to the overall delivery schedule.
In the case of SA releases containing backlogs or immediate requirements, the system never checks tolerances.
Activities: -
You process creation profiles in Customizing for Purchasing under Scheduling Agreement ® Maintain Release Creation Profile for Scheduling Agreement with Release Documentation.
You assign a creation profile to a scheduling agreement item in the Additional data.

Automatic creation of Schedule line after MRP RUN

Hi,
Till now we are using only PO for placing orders to vendor, now we want to use the functionality of scheduling agrement, so that after MRP run, we can get automatic schedule line creation, for this , what are settings required, how system create the automatic schedule lines based on which criteria, second thing while creating on eschedule agrement i found that the conditon which i can add for a vednor in ME21N that all condition are not coming while creating schedule agrement even my vendor is same for PO and Schedule agrement, so what are the setting required for this.
regards,
zafar

Hi
1.In material master purchasing view data auto PO is to be flagged.If scheduling agreemet with release documentation.
Then flag JIT indicator 1.
2.maintain MRP views in material master
3.In source list for fix vendor,source list usage 2 is to be maintained.
4.Vendor master purchasing data auto PO indicator is to be flagged.
5.Then when you run MRP automatically schedule lines are generated.
For JIT and forecasting maintain creaton profile in OMUP transction.
Assign the creation profile in scheduling agreement.

Deletion and creation of Schedule line for Line Item

Hi BW Experts,
In P.S.A. when i have checked for first schedule line 001 reqdelqty is 50 , after deleting 001 and after creation of second schedule line in R/3 there are two records transferred from R/3 for schedule line 002 first with reversal indicator 'X' and delivery quantity -50 and next record with Reversal Indicator blank with value 50. which in turn results Reqdelqty zero.
Reason of wrong data in BW: -
Schedule line category for an item is being deleted forcefully. R3 doesnt allow deletion of a schedule line category if delivery is already created. Here user is creating one same schedule line and then he deletes the order quantity from earlier one. This forces system to pick up schedule line 2 in the document flow
· User shouldnt delete schedule line.

Hello Ganesh,
Schedule line number sequence will not be in control of the user.
once delivery for a schedule line is completed, no way you can delete the schedule line (except renumbering case). This is general SAP logic relates to schedule lines.
Let me know how they are deleting the schedule lines even though delivery is completed.
Now coming to Data load problem in BI.
When you delete schedule line 001, the generated record should be with schedule line 001 with Reversal Indicator as R and delivery quantity -50.
And for new schedule line 002, reversal indicator as blank and delivery quantity 50
Regards,
Nandakumar.A

How to create Creation Profile

Hello all Gurus,
Can someone please tell me how to create "Creation Profile" and use them in MM scheduling agreement? I have an issue, where the user wants 2 separate creation profiles to be created so that the demands should be sent to suppliers on Thursdays and Fridays only. I maintained the creation profiles in SPRO -- MM -- Purchasing -- Scheduling Agreement -- Maintain Creation Profile for Scheduling agreement with rel. doc. But these creation profiles doesn't seems to work. What are the extra steps that we need to carry out once the creation profiles are created and then maintained in MM scheduling agreement?
If you have any knowledge on creation of CREATION PROFILES please share it with me. It will be very much helpful for me.
Thanks and Regards,
Umakanth

hi,
Go to SPRO > MM > Purchasing > Scheduling Agreement > Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
Maint. Rel. Creation Profile for Sched. Agmt. w. Rel. Docu.
In this step, you can define the release creation profile.
The latter is an instrument for determining which criteria are used to generate releases against a scheduling agreement and transmit them to the vendor.
You assign the creation profile to the scheduling agreement item in the additional data.
The creation profile controls the creation periodicity of the releases and - starting from the current date of release creation - the way in which the quantities are aggregated.
In the release creation profile, you can define
o   General Parameters
-   Which creation strategy is the basis for JIT delivery schedules and scheduling agreements.
-   How backlog and immediate requirements are taken into account during release creation.
o   Aggregation and release horizon
-   If and how schedule lines should be aggregated during release creation.
o   Release creation periodicity
-    With which periodicity scheduling agreement releases are created
o   Tolerance profile
-    That for releases created as a result of changed schedule lines, the system performs a tolerance check
o   Internet release
-    Whether an Internet release is created during release creation

Creation profile for SA

All,
1.Can anyone pls tell me the path for doing creation profile for schedule agreement in SPRO?
2.Also pls explain abt creation profile?
Thanks

Path
SPRO- Material Management---Purchasing -SCheduling Agreement----Maintain Creation profile ..
Definition: release creation profile
An instrument used to determine the period in which releases (types of delivery schedule) are generated against a scheduling agreement and transmitted to the vendor.
The creation profile controls the creation periodicity of the releases, the aggregation of scheduled quantities starting from the day after release creation, and the implementation of a tolerance check to ensure that releases are only created in the case of major changes to the overall delivery schedule in the system.
Example
A release creation profile for a scheduling agreement for which delivery schedule lines have been entered over several years specifies that releases are transmitted weekly from 01.01 to 12.31 of the first year. The release quantities are to be aggregated as follows:
For a period of 10 days starting from the current date of release creation: no aggregation. From the tenth to the thirtieth day: on a daily basis. From the thirtieth day to the sixtieth day: on a monthly basis.
Reward if helpful

Safety stock not covered by schedule lines in planning run

Hi !
In our organization we are trying to implement scheduling agreements and automatic creation of delivery schedule lines through MRP. We have MRP type PD and it considers the reservations created by PM orders and Production orders as requirement elements. When I do the planning run, it creates schedule lines for the PM order reservations and purchase requisition for safety stock. I need it to create schedule lines for all scenarios. Kindly help and suggest a solution.
Regards,
Satya

Hi,
Please refer the below links.
Schedule Lines not getting created in MRP
Re: No Scheduling line is generated when RUN MRP
Hope it helps you.
Thanks.

Creation profile based schedule lines

Similar Messages

Maybe you are looking for