Creative 6.1 6700 speaker problems.

hello i have the above system and when you check for the calibration test for each speaker it is fine but when i play music it only comes out of the left and right channel,it is 6.1 in the settings thanks

I sorted it out,went to the eax console on the mediasource go panel,then enabled the cmss 3d tab and put the pointer in the middle,it had been at the top.:smileyvery-happy:

Similar Messages

Creative Inspire T5400 Center Speaker Problem

Hey Creative,
I use the Audigy Platimum Sound Card with Audigy drive with Inspire T5400 speakers. Ever since i got the speakers I have noticed either the center speaker plays so quiet its almost not hearable or it doesn't play at all. This happens for music alot. I checked all the hookups and I got the AudioHQ and Windows set for 5.1 surround speakers. What is the problem?
Thanx
Adam

Adamb10,
You will need to enable CMSS though Playcenter for the Audigy. Launch playcenter and put it in player mode (not jukebox mode) on the right hand side there is a button that expands out the player to display a number pad. At the bottom of the numbers there is a button marked CMSS, set it to on or movie mode and it should give you what you want.
Jeremy

Creative 6.1inspire 6700 Speaker spares???

hi i`ve got a problem with my speakers (inspire 6.1 6700) and i`m pretty sure its the volume control bit, is there anywhere i can get just a new one of these?thanksdave.
Message Edited by davidwatson85 on 12-19-2006 04:18 AM

Hi, I have exectly the same problem with the same set of speakers - did you have any luck finding a spare part?Jon

Speaker problem with SoundBlaster Live! Va

Hello all,
i've installed a SoundBlaster Li've! Value in my computer and i've connect to it a speaker system Creative Inspire 6. 6700
The problem is that i can't hear sound from central and LFE channels. And worse, in the creative surround mixer i cant' switch to 5./6. but only Headphone/2speaker/4speaker!
WHY? Thanks for your help!

The reason is you have only got a 4 channel sound card....... It's not a 5. sound card. Dude it's time you upgrade man.

Creative 6.1 6700 help :S ?

Hi..
i have Creative 6.1 6700 but the problem is that just 5 speakers are working is it that i have a Genius 5.1 sound card ..or what?
IFF it's a sound card .. can anyone tell me which s.card is good for 6700.. (all 6 speakers to work)

n0thinG wrote:
ups sorryy :$? it wasn't enabled at my software options .. but if it's ok i have another problem ?:Swhen volume is high ,sound like starts to "crash" it starts stoping and can't play the song .. does anyone knows the problem ?(sorry for my bad englisht :S )
Sounds like something is wrong with your sound card instead of the speaker. perhaps you should test the speaker using other devices or sound card first.

Help with P5800 5.1 rear speaker problem.

I have the Inspire P5800 5.1
When I test the speakers with the Surround Mixer control panel I get the test voice on all 5 speakers. If I play a DVD with 5.1 Surround (Spiderman 2) I get no sound from the rear speakers. I have Soundblaster Live. 24 Bit. I am using ATI All-in-Wonder to play the DVD.
What could be my problem? I beleive it should be a set up in the computer, I just don't know where.
My computer skills are intermediate.
Thank you for any help,
Al

Using the Creative software (double click speaker icon in tray) then go to speaker setting make sure that you select 5.1 Speakers. If possible, try and download PowerDVD6 this software allows you change the speaker configuration to 5.1 etc...
You may also have this feature in ATI all in wonder. Check Audio options, make sure that 5.1 is selected or similar. It could also be that the ATI software does not support 5.1 only stereo 2 speaker.

Creative Zen stone with speaker not recognized by Vista 32

My creative zen stone with speaker is not recognized by computer. Downloaded starter pack and it worked, but the first time i disconnected it and connected again, the device is not in "my computer". It is listed as working properly under "safely remove hardware". Uninstalled drivers, and connected again, driver was installed and I am told the device is ready to be used, but it is still no where to be seen, and update tools etc. also does not recognize connected device.
thank you

Try going into "Control Panel->Administrati've tools" and clicking on "Computer Management". Find "disk management" in the left pane and click it. Your Stone should be in the right somewhere. I think you need to right click, then "choose dri've letter and paths" and give it a dri've letter with the "add" button. Let us know if that works.

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Ipod 4th gen volume buttons not working. Volume bar not showing in music or video apps, not a speaker problem as this works fine when testing built in alarm tones???

Have you tried the standard fixes:
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backup via iTunes
- Restore the iPod to factory defaults/new iPod.
If still problem you likely have a hardware problem and an appointment at the Genus Bar of an Apple store is in order.

Rear speaker problem

Hi, i have 4 speakers and a subwoofer. Mainboard is asrock xtreme4 which come with realtek hd audio.
You may know the famous "rear speaker problem" on windows products. While speaker test just works fine, rear speaker never works on media player, winamp etc...
But recently it become really interesting because, that rear speakers works fine on firefox browser 22.0. So it gave me hope the solve this problem once and for all.
Right now, when i listening any thing on firefox, rear speakers works fine. But not working on Chrome and other stuff.
What firefox 22.0 made to work speakers fine?

hey have you tryed connecting other speakers to the bad connected one and see if it was not a bad channel? if so then let me know and I will look in to this problem more and try my best to get you the answers your looking for ok

Sony dvd player with any creative 5.1 channel speaker

I have a sony dvd player(DVP-NS57P) with following outputs,
Composite Video Output -
Component Video Output -
Analog Audio 2ch Output (L,R) -
Coaxial Digital Output -
Optical Digital Output - and I want to connect this one wiht any creative 5.1 channel speaker to create a home theatre. I planned to by a sony home theatre, then my dvd player became waste. I want to utilise my existing dvd player, is there any possiblities there , also suggest which model in Creative is suitable? I really thankful to to you valuable suggesion. my budget is Rs6000.

interscope,
If you have a Li've! 5. card, the CMSS option is located in the PlayCenter application. You can check this thread for more info.
Jason

Solved my scratchy speaker problem. Do a hard reset. Home,sleep button. Hold till screen goes blank.

Had a scratchy speaker problem and strange sounds when ipad shutdown. Hold the home button and sleep button till screen goes blank. Turn on after a minute or two. Fixed it on ipad 4. Good luck.

Apple replaced with new phone under warranty, had to haggle a little to get that done. Set up new one as a new phone, not from a backup, so as to not transfer any possible software issues to the new one, still re-setting up everything... all was good for the first week or so, now this one does the same thing, plus a new issue. While on calls the screen will go black, and the absolute only way to get control of the phone again is to hold both buttons down until the apple logo appears and phone restarts. Additionally, sometimes it will now become unanswerable when receiving a phone call, has only happened on vibrate, but it will go into a continuous vibrating mode and no way to answer the call or stop it, other than the two button restart. Does it on normal calling, and on 4g lte calling setting (verizon).

Nokia N93 Speaker Problem Please help!

Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.

29-Mar-2008 09:06 PM
bigboy_245 wrote:
Hello guys, i have bought a n93 because my Qtek 8300 was damaged severly, alright so i get the n93 and i cant use it becuase of a big problem. When i make calls on the recieivng side of when ppl c all there is a flickering noise (the speaker where ppl talk to you) or when i record video the noise happens again. Im so fraustraited becuase i cant use it to make calls only on the headset, so im sure this is speaker problem right? Someone please help me and tlel me what i can do.
Which firmware version you have. To check type*#0000#
If my post has helped you please click the white star on the right

RE: Speaker problems

I have an iPhone 4S. I have been having speaker problems for a while now and am slowly realizing when using and doing certain things that my sound is not working. When I take a video my sound does not work, when I facetime with someone they can't hear me but I can hear them. When I try and put someone on speaker phone they can't hear me. I can listen to music and listen to videos from facebook, youtube, etc. So my question is what could be causing this because I have sound otherwise, I can hear text message sounds, facebook notifications, etc. Help is appreicated. Thanks.

Hi serena36,
This sounds more like a microphone issue that a problem with your speaker. I would suggest using the steps in this article to troubleshoot -
iPhone: Microphone issues
http://support.apple.com/kb/ts5183
Thanks for using Apple Support Communities.
Best,
Brett L

My iphone has auto speaker problem ,it pronounces everythin i touch n also auto speak

my iphone 4 has auto speaker problem it pronounces everythin what i touch in the desktop.and also auto speaks like when i switch on it tells time........ after some sec if i left it it says sleep alot....

It sounds like you need to turn VoiceOver off, see this Apple doc -> iPhone: Configuring accessibility features (including VoiceOver and Zoom)

I got speaker problem on iPad 2 once after I upgraded to iOS 7.3. Any idea? Please help

I got speaker problem once I upgraded my iPad into iOS 7.0.3. Any idea? Please help.

Go into the settings and reset all settings. See if that helps.

Creative 6.1 6700 speaker problems.

Similar Messages

Maybe you are looking for