CREATIVE And AudigY SE MadnessS!

CREATIVE And AudigY SE MadnessS!? Hi
WHich is the best driver verson for Audigy Se to use in Xp, I have full Driver Pack that comes with my Sound Card it's old,Drivers are of 2005 and Creative released Another set of drivers SBA_PCDRV_LB__04_006,Which is 2006 driver has not Microsoft WHQL Certified, and on 2007 another one SB24_VTDRV_LB__04_0077,Which is displaying my Audigy as SB Li've! 24bit under Sound & Audio Device properties,and the last 2007 version driver has so many problems When logon on to windows the logon sound is Automatically at High VOlume,It distorts,and all version of these Drivers lacks Treble,i should Pump up the treble In EQ to full get HIgh Frequencies Otherwise it's little bit Muddy,And 2007 Version has is faily Direct Sound Tests in Creative Diagonostic Utility.... There is some problems with Daniel_k Mod pack,even the latest support pack 2.6 , Sound is muddy in Games like Metro 2033,Nfs Most Wanted. PAX drivers are in Beta stage still Hope he will Fix the problem,So i'm Using CREATIVE Defalut Drivers, When Using Default one there is no Problem in games.... So Plz help me to decide Which CREATIVE driver Version IS best.... Plz reply..

Pookie,
I don't see any pink jack on that card. Are you using the same Audigy SE card as in this link? As far as I can see from the picture, there's only 4 jack(Blue, Green, Black & Orange).
Jason

Similar Messages

Xbox 360 and Creative Labs Audigy 2 ZS Platinum Pro Prob

Hello
I have a Creative Labs Audigy 2 ZS Platinum Pro, and on the external box it has an optical in. My 360 has an optical out so i thought id try and see if could get 5. surround sound through my PC speakers.
However up on connecting the cables and setting my xbox to 5. i have found it does not work.
Do i have to do anything special to get it to work?
Thank you,
Chris Mayhew

xxmikayxx,
Call -800-998-000 Option # and they will be able to find a solution for you. It should have come with a CD key and it may be located in a different place occasionally.
Jeremy

Creative SB Audigy 2 ZS (Tremor) Sound C

Hey there! Seems like I'm having the same problems that others are when they get a Gateway OEM Audigy...
Gateway doesn't offer any software like Creative does, they just post the drivers? Drivers: 5.2.4.442 ...
I built my own little PC however the Audigy 2 ZS is Gateway OEM? So does that mean I can never get Creative's software? Because this is suppose to be a great card. & I've heard my roommates. But he has everything Installed were I merely have the drivers located --
http://support.gateway.com/support/drivers/getFile.asp?id=9860&dscr=Creative%20SB%20Audigy%20 2%20ZS%20(Tremor)%20Sound%20Card%20Drivers%20%20Re vision:%205.2.4.442&uid=96355720
Now it seems that the only way to get all the cool sound effects is to have everything installed that comes with the Creative Audigy, so I went ahead & tried installing my buddies software seeing that we have the ?same card? but it won?t let me, it keeps stating I don?t have an Audigy in there.
Is there anything I can do? Maybe bypass that evil message? I mean the card is there & it is this company?s product? So shouldn?t we have access to the software?
Please help!
Below are the drivers or what it says in my device manager.
& in my signature you can clearly see my PC?s specs.
Under: Sound, video and game controllers
Creative SB Audigy 2 ZS (WDM)
Under Driver Tab:
Driver Provider: Creative
Driver Date: 3//04
Driver Version: 5.2.4.442

Hi!
I appreciate the URL, but that is not what I was looking for.
I have that help files already. Also my unit is not the platinum.
I just have the card, and the picture I need is a closeup of the
rear bracket, so I can see, upside down, exactly what each connector is.
On most sound cards they are colour coded, and IF this one is, it is not visible.
And I have trouble seeing anyway ... OLD eyes LOL!
A few years ago there was an awesome full color, closeup, detailed photograph,
not a drawn picture on the net, somewhere, and I should have saved it then ...
The best laid plans! OH WELL!

WIndows 7 and Audigy

WIndows 7 and AudigyX I can't seem to be able to find an answer to my problem. I seem to somehow have several different settings on my computer for my Audigy 2 sound card. When I boot the computer it seems to grab whichever setting it wants. In the Control Panel>Sound it might say 4-Creative SB Audigy one day and 7-Creative SB Audigy the next. There are a handfull of other settings with different numbers. When I check the drivers sometimes it lists the 2009 driver and sometimes it lists the 2006 driver. Sometimes it even appears to be downloading a new driver from the internet.
In any event, invariably I have to reset my TONE and LEVELS settings.
Does anybody know if this is a Windows issue or a Creative issue? Is there a settings file that can be edited or deleted? Registry hack?
John
Merrillville, IN

\ Best bet for getting Audigy 2 ZS working correctly under windows 7 is this driver pack:
<a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934"]http://forums.creative.com/t5/Sound-Blaster/SB-Audigy-Series-Support-Pack-3-6--09-2009/m-p/540934[/url]

Bsod @ startup after installing Creative SB Audigy 2 ZS

System is a custom built 2005 XPS running XP WMC 2005 Service pack 3 installed
w/ all the lastest Win patches, WMC upgrades, and virus protection.
It used to work great. Wanted to clean it out tho, so did a fresh WinXP WMC install.
Installed st off the original SB Audigy 2 ZS disk that came w/ the system.
Computer has to reboot in order for install to take effect, fine....np.
BSOD at startup before XP can load.
IRQL_NOT_LESS_OR_EQUAL
STOP : 0x0000000A ( 0x00000000, 0x000000C, 0x0000000, 0x804EBF8)
Reboot with last known working configuration, works fine. Maybe its the older drivers
I add/remove programs - Remove all Creative progs, go to Creatives website and dl
latest drivers - 2.8.00.exe. I reboot freshly, XP loads fine, hardware manager finds
new hardware (my Audigy 2 ZS soundcard) and wants to install. I just cancel out the gump
and go to where I dled 2.8.00 and run the install. Program must delete previous driver
in order to install the new version and reboot.....fine....np. Computer reboots fine, install takes and BINGO !
Ive got sound. MP3s play, 5. surround works fine.
Problem : Everytime I reboot the computer after this, I get the same Bsod noted above at startup.
I reboot, hit F8 and pick Reboot with last known working config and its boots fine except......no sound.
Ive done this 4 times now to make sure its the Audigy drivers/software pack. I get sound fine after the
st reboot when its finishing the install. Everything works great. If I turn off the computer or reboot after
that, its the Bsod @ startup.
If I leave the sound gone, I can reboot w/o any problems. Systems works fine w/o sound installed.
If I want sound I have to install 2.8.00, let it reboot to finish the install and I've got sound. I just cant
turn off the computer or reboot again or its a Bsod. The way it is now if I want sound, everytime I turn
off/reboot, I have to F8, reboot using last known working config, delete all Creative, reboot again this
time normally (it willbecause theres no Creative installed and it already had one good reboot), install
Creative and wait for the reboot to finish install.
Having to reinstall Creative Sound Blaster Audigy 2 ZS everytime I reboot is unacceptable.
Ive never had any problems with Creative before and own 3 computers, 2 of which use Creative products.
Any suggestions would be greatly appreciated.

; Thanks for all the advise and help ! Couldnt have done it without these forums !(sarcasm)
Problem fixed. Creative's crappy drivers were not deleting with their uninstall programs
and none of their newer driver install programs deleted their older crappy drivers.
Driver Sweeper downloaded, run in safety mode, and wiped all Creative's crappy drivers
from the computer. Reinstalled the newest driver package (the same one that wouldnt
delete their older crap drivers) and everything runs fine now.
Id recommend ANYONE use Driver Sweeper if they're trying to reinstall any of this company's
sound drivers since they can't get their new driver packages to delete older drivers.
Poor programming guys, really.

7.1 with and audigy

Hey everyone, about two years ago i purchased the sbs 5. 560 speakers and a creative sb audigy , the system had some kind of problem where the front right jack in the subwoofer would not play music to any speaker or audio device put in it. Had I realized it wasnt software or something that could have been fixed i would have taken it back but i waited too long so now im out of warranty and i need a new speaker system. I was looking at the creative p7800's but i need to know if my soundcard can use these speakers to their full potential (meaning full 7. output). If i go to the audio hq under the control panel it says i can only have up to 5. channels, but if i go to control panel then to sounds and audio devices it says i can have up to 7., which should i listen too?

The Audigy will only put out 5..
You are free to select any setup in the Windows System, regardless of the actual audio Hardware installed.
However, you state here that your speakers are also 5.
If you only have 5 speakers and a subwoofer, then you are indeed limited to 5.
If you have already invested the money in a 7. system with 7 speakers and a subwoofer, then get any audigy 2 card (I just bought a ZS for $80). The speaker system was probably a lot more expensi've, and the rather cheap soundcard upgrade will let you use it.Message Edited by rstich on 06-5-2005 06:7 PM

Creative Soundblaster Audigy 2 Zs help

Before I start rambling on about my problem here are my specs (BTW I'm not incredibly computer literate; my dad helped me install everything before I left for school):Cpu: Intel Duo Processor 2.66 GhzRAM: .5 GB DDR2Video Card: ATI Radeon 9600 (soon to be one of their newer models)OS: Windows XPSound Card: Creative Soundblaster Audigy 2 ZS?Ok so I was reinstalling everything after I had to format my computer. I get through installing my creative sound card and figure everything went great. I was playing my music when I had realized that I forgot to configure my sound card for them, as I was getting mono instead of stereo (was only playing out of left speakers). So I go into speaker setup and click on "calibrate speakers" or something like that. Anyway, the speaker calibrator says that It could not be ran for some reason (i forget). I figure that it wasn't working because I hadn't updated anything yet. I update, and I still get the same message. So I reinstalled the software and updated it again and now when I try to run ANY of my creative software related to the sound card (I.E. EAX console, Speaker Setup) it says that "The Audio device supported by this software is not detected. The Application will now shut down."? Now remember that I'm not great with computers, so my solution now will probably sound stupid. But anyways I figured that I had installed the wrong sound card software (it gives me three choices on the disc). I uninstall everything and choose another setting. I still got the same problem. So I try the third choice and I get the same problem. Any suggestions? I've tried all three choices and I still get the same problem.

tony8gj wrote:
I have the SoundBlaster Audigy 2 ZS sound card installed in my Dell 8400 PC. Does anyone know what the latest SoundBlaster Audigy 2 ZS driver version is? I currently have driver v 5.2.4.445 and date 8.7.04 I've tried to install this from the Creative site: SBA2_PCWDRV_LB__84_55-R.exe but keep getting a "setup could not detect and sound blaster audigy 2 on your system" error. The driver on the Dell site is: Creative Labs SoundBlaster Audigy 2 ZS: R92022.exe Thanks! Tony.
Hi
You may first need to patch the driver package by using ctcomp.exe to get std. drivers (eg. not Dell specific) installed to your Dell PC. Search this forum after ctcomp.exe --> there you'll find some instructions too.
You can also find a link to the latest drivers available (I personally use Audigy 4 drivers from november 2005 --> can be found from creative support pages) by searching this forum (I think the latest WHQL version is .~62 for the original version).
jutapa

Gigaworks and audigy 2 zs platinum lip sync is

Can smeone form creative please help me with this issue.
I have loads of external dvd players, a pacific, an xbox, 4 yamadas, accoustic solutions, scanvision, etc etc.
This is what is happenning, i am connecting the pacific dvd players optical out (or coaxial) It makes no difference as they both do it.
Press play to watch dvd, and start watching movie, the longer the movie plays and even in the first 5 minutes of playback the lip sync starts to go out, this is with the use installed decoder checked on soundcard and doly digital decode slected instead of default, spdif byass.
If i stop or pause the dvd and press play the lip sysnc comes back in, then it gradually goes out again.
Now it is not the dvd player. as it does this with the xbox as well, and the yamada, etc etc, this is on a clean installation of win xp pro, the only things that are in are chipset drivers, gfx card driver and the full installation of the audigy 2 zs platinum driver disc.
I connect the optical out or the coaxial ut to the optical in on aud 2 zs plat li've bay, and the same with the coaxial in on aud 2 zs plat li've bay, but only one at a time.
Can someone tell me why this is doing this, i am 98% certain i do not get this from using aux 2 in.
Also it always says unknown or invalid spdif signal in the decoder options.
Also it fails to initialize the dolby digital decoding when inserting the coaxial cable sometimes or rather 8 times out of ten, i have to either restart dvd player, or restart computer to get sound back.
I am not happy with either the s750 speakers whilst playing dvds or the audigy 2 zs card, the speakers are not very loud whilst playing most dvds and teh lip sync is not acceptable, i have used a dtt2200 and sb li've 5. witht the same dvd players and i never had this issue, granted this was on another computer, so i wil be try the s750 with the new computers onboard 7. sound chip to see if i get same issues, then i will be moving the sound card into another pci slot but i should not have to do this, as creative should have already tried this card in all available pci slots in all manufacturers motherboards to test the compatibility, if this issue remains can someone at creative tell me if they will give me a refund for the hardware of gigaworks s750 and audigy 2 zs platinum as www.dabs.co.uk will not give me a refund for these the speakers have only been in use for at most 2 weeks but are 3 weeks old and aud 2 card is about 0 weeks old but have only just been tested on my new computer as of at most 4 days as thats went i got all the other hardware to build up computer and i am most unhappy that dabs tell me they only do a refund or replacement upto 28 days, so creative it looks like the refunding of my money will fall to your company, but then after all it is your hardware, so you maybe can force dabs into giving me a refund , as after all it is your hardware and you will be able to reimburse dabs .

I tried it into all available pci slots on a fresh clean install of windows xp even the exclusi've pci slot was used, and even ehen it was in the other pci slots, it was not sharing an irq with anything anyways, it still does it whilst decodint the Dolby Digital Stream.
Have tried the driver updates for the card and it still does it.
I have the audigy 2 zs platinum witht the li've dri've I/O .
I have taken this card out and put my soundblaster 5. platinum card in, and the li've dri've IR that came with that card, and using the optical in or the coaxial in the same way as the Audigy 2 zs plat li've dri've ,and it decodes the 5. with perfect lip sync, however this is not true dolby digital decdong on the sb 5. card as you have to use the CMSS feature anyways on this card, so even though the ac-3 decode is ticked, it aint true Dolby Digital Decoding anyways.
So i took that card out, and put in my older audigy Platinum 5. card, and teh li've dri've that came with that card, and formatted windows, etc, then after xp went back in installed the audigy drivers etc, then connected the coaxial cable from external dvd player and This also plays the 5. with perfect lip sync, but again however this is not true dolby digital decoding on the audgy card, even tehough the option is selected ac-3 spdif decode in audio hq, You still have to use the CMSS feature to get kind of 5..
I know this to be true as when the 7. Audigy 2 zs plat card is in, when you play dvd from external dvd and use the optical or the coaxial to the fron of the li've dri've that came with audigy 2 zs plat, you get the Dolby Digital Logo appearring on the monitor screen to tell you that it is decoding etc, and teh Quality is very good and you can hear that it is a Dolby Digital 5. stream, APART FROM THE FACT THAT THE AUDIO GOES OUT OF SYNC WITH THE PICTURE.
So I know it has to be down to the actual hardware of the audigy 2 zs plat soundcard or the hardware in the Li've dri've that came with the audigy 2 zs plat soundcard. Its a shame that a lot more people that have bought this pruduct ie the audigy 2 zs platinum version, would not test there li've dri've soundcards dolby digital decoding using an external dvd player, so as we could get a better idea of the problem, AS there are only a couple of other users on this forum that have this harware and they have the same problem, so is it because these cards are faulty, or is it inherint in the hardware that cannot be fixed, cos it aint in the software, but how can we find out when no one seems to be able to tell for sure that a driver update will fix it.
Also Does the Audigy 2 zs platinum Pro suffer from this same lip sync issue whilst using the external dvd players optical out to the optical in to decode dolby digital 5. streams.
Saying as i spent over ?400 on the s750 gigaworks speakers and the Audigy 2 zs platinum soundcard, and that they are only 3-4 months old, and have just been installed into my computer (ie just opened within the last 2 weeks) i am really shocked to learn that nothing can be done and i have wasted a lot of money to get something that cannot do what it is advertised to do, And www.dabs .co.uk are reluctant to refund me my money on the basis that they only do refunds upto 28 days, so in my situation although i purchased the goods 3-4 months ago, i have only just got round to teseting the goods, as i needed the other bits to build computer up , like the case mnotherboard etc etc.
Come on creative, whats the score with this hardware.

Creative SB Audigy 2 ZS (WDM)-Picture of rear panel nee

Hello,
I was wondering if anyone has, or knows where I can get a
picture of the back of the Creative SB Audigy 2 ZS (WDM).
The way I have my computer set up, I can not see the connectors
and which one is which.
Also, there are NO colors on the back of my card.
(and I am going to be looking at it upside down) -
I remember seeing a great closeup shot, but that was years ago
I should I saved it back then!
I also would like to know how many external inputs there are on that card,
and are they stereo and/or digital?
Thank you for any help you can give me.
I have been searching for a few weeks to no avail.

Hi!
I appreciate the URL, but that is not what I was looking for.
I have that help files already. Also my unit is not the platinum.
I just have the card, and the picture I need is a closeup of the
rear bracket, so I can see, upside down, exactly what each connector is.
On most sound cards they are colour coded, and IF this one is, it is not visible.
And I have trouble seeing anyway ... OLD eyes LOL!
A few years ago there was an awesome full color, closeup, detailed photograph,
not a drawn picture on the net, somewhere, and I should have saved it then ...
The best laid plans! OH WELL!

Will Xbox, Logitech X-530 5.1 speakers and Audigy 2 NX combo decode dolby digit

Hi there
I have a Xbox, Logitech X-530 5. speaker system and Audigy 2 NX sound card. I want Audigy 2 NX sound card to decode dolby digital from its optical-in? (optical in is from the XBOX) .. Is it possible? If yes, how? If not, what is the solution? Can Extigy external sound card do it's
Also, can be Audigy 2 NX external sound card be stand alone instead of always being connected to the PC? I just want it to be connected to XBOX to decode dolby digital 5...
Thanks!

it is relevant for me to post in here as someone was asking if the aud 2 zs plat dri'ves optical in or coaxial in could be used for connecting up to an external source sch as dvd player, xbox.
And i am in technical supports hand about my prouducts, so if yo u ban me i will be insisting they take action against you , as i have a valid reason for posting into these forums.
I have spent over ?3,000 on creative proucts, and the last 2 things i purchased from, creative cost ?450 the gigaworks s 750 speakers, and the audigy 2 zs platinum.
And therefore i am entitled to speak the truth.
Some one asked if the connection is possible, i am not the only person using the hardware that is having decoding lag whilst using optical in on li've dri've, it's just that not many people that have this hardware are using it like this, so they don't realise that they will have problems if they ever decide to use external dvd players, instead of the software ones like powerdvd windvd etc.
I am forwarding this entire thread to creative technical support guy that i am dealing with so he can see i am not doing anything wrong, you need to look at my other post with regards to the audigy 2 li've dri've having the exact pcb model number revisions etc, as the audigy2 zs platinum li've dri've, and that the combination of the audigy 2 li've dri've not being a connection that creative will offer support for, which is another thing i will be asking creative when i phone tech support up tomorrow, as i want to speak to someone higher up about this.
And you say you are testing this at home and cannot replicate this issue.
Can i ask what speakers you are using.
What soundcard are you using, are you using the aud 2zs plat version not the plat pro version.
Also what make of dvd player are you using to play dvds on, what spdif option your using in external dvd player ?
And what are the model numbers on your audigy 2 zs platinum li've dri've motherboard ?
Also what driver version are you using for the zs plat card ?
As i have used the supplied disc version, and updated to latest versions makes no difference.
Message Edited by 00db on 0-30-2005 0:57 PM

Creative SoundBlaster Audigy Advanced MB software activation probl

Hello!?I bought?a software named Creative SoundBlaster Audigy Advanced MB, when I ordered my notebook Inspiron 720 from DELL, on the 8th? of September, 2007. They provided a CD for the software, which I installed, and it worked. But then later that day (when I recieved the laptop), I formatted the hard-disk for the following reasons - ) It only had 2 partitions for the entire dri've, one of which was a recovery partition, and I wanted to create more.2) I wanted to remove MediaDirect.3) I wanted to remove bloatware that DELL gave me with it, ie, DELL Quickset, DELL Support, DELL this, DELL that, Norton AntiVirus etc.4) I wanted Vista installed by my way. After I had done everything I wanted, I started to re-install the Creative software, the same way like I did before. But this time, when it took me to the transaction page and asked me for the reason of re-installing this software, it said "The CD Key has expired."?I have tried 2 different browsers,?I have cleared my cache, I have penta-checked my CD-Key before each install and have done anything a Computer Software engineer (me) would do, with the help of the Internet as well. But my every effort went in vain. Then, I did something I didn't want to do, I contact DELL technical support. Their solutions ranged from installing the latest drivers (yes, drivers for a software), to removing and re-installing the latest Internet Explorer (yes, they asked me to REMOVE IE) to put the HARDWARE in some other machine. Quite clearly, the 4 support executi'ves I talked to there at DELL had no clue as to what is going on and what is the problem. Then, after a 2 hours chat with another one of them, I was told that they just provide the software, and it is Creative's duty to handle everything later and asked me to talk to you. The email support page do not have the option of support for this software, so I selected some other product but sent my problem.
It would be very nice to know if there exists a solution to this problem, and how should I approach it. It has only been 20 days since I bought this software. Thank you!

Finally, I got a reply from the email team, and they sought some further information, which I duly provided. Then, they provided me with a new CD Key. But here is the thing, they say after 3 times of re-installing the software, I will have to pay for it. What?Why would I pay for something which I bought, again and again? The whole world knows about Windows Vista, how incompatible it is with more than 80% of the software, and it will be the same till SP is released. I have since this Sunday gone have re-installed vista 4 times, once due to the fact that AHCI in the BIOS was not enabled by default, and I had to re-do the installation, then it was SATA drivers not presentonthe Vists disk, then the nVidia drivers had problem with Vista and it crippled it and won't go and then the Windows Media Player , quite clearly still not fully functionable, made my system bust. And I can say that it will happen again, so why do I have to pay some part of the software's price again? I am not using it on any other machine, and that is checked by it's CRC checker anyways, I am not using it for any business project, which shouldn't be a problem even if I did, as I own it. If any of you guys have an answer to this, please let me know.
Thank you, and have a very nice day all!

Cables for digital output for DTT2500 and Audigy 2 ZS

Hi, I lost the DIN cable for my DTT2500 speakers in a move. I've already read the article http://forums.creative.com/creativel...message.id=270
I'm having a hard time finding the correct cables to get the full digital experience out of my setup. DTT2500 5.1 speakers and Audigy 2 ZS. I game, listen to music and watch DVDs on my computer. Can someone link me some product pages where I could buy the necessary cables?

Hello Jason,
Could you tell me if I can still buy the cable below in order to connect DTT2500 with Audigy 2 ZS?
9-pin Mini Din to 9-pin Mini Din (2 meters - Red)
http://us.creative.com/products/prod...4&nav=features
If not could you provide me the wiring diagram of the Din?
What is the difference between the Red one and the Green one in the shop ?
Thank you

Quicktime and Audigy Series Audio Woes

Recently, a growing number of people over at the Ambrosia Software webboard have noticed problems when running Escape Velocity Nova on their PCs. EV Nova uses Quicktime for much of its sound and images, as the game was originally developed for the Macintosh.
The problem we have is specifically related to the game's theme music, which is stored as an MP3 file and played through Quicktime. When running Quicktime 7.1 on a system with a Creative Labs Audigy series sound card, the title music will exhibit a number of anomalies: Playing at odd rates, stuttering, crackling, etc.
This problem does not occur with Quicktime 7.0.3 installed.
Furthermore, I have also noticed that the Halo 3 announcement video, which uses the AAC Audio codec, also has the same problems under the same scenario. In this case, the audio is still problematic under 7.0.3.
In all cases, none of these problems occur with any other sound device that I know of.
My question is, what is going on that is causing these problems? More importantly, how can we fix it, or will Apple and/or Creative have to update their software?
For that matter, is there anywhere that we can still download Quicktime 7.0.3 or 7.0.4?

This problem was solved for Audigy series sound cards with a recent Creative driver update. The Live! series cards haven't received an update yet, so the issue remains for them.

Creative Soundblaster Audigy SB0570

Hi friends, start by apologizing for possible misspellings. Creative Soundblaster Audigy I have problems with SB0570. Since I bought this motherboard sound I had only 4 speakers sound without subwoofer and center. When I give test everything works properly. Maybe not something I set myself right in "Creative Audio Control Panel" or Winamp, I run Windows 7 and the latest drivers audio system Genius SW-5.1 3000 5.1 What should I do to work all satellites including subwoofer. I am attaching some photos with my settings. My hardware:
AMD Athlon II X3 455, 3300 MHz
ASRock 880G Pro3
1 x 4 GB DDR3 1333 Team Elite 1333
Western Digital 500GB SATA-III 7200rpm 16MB Caviar Blue KX
SAPPHIRE Radeon HD 6850 1GB GDDR5
Attached Images
1.JPG
(32.6 KB, 4 views)
2.JPG
(38.9 KB, 3 views)
3.JPG
(34.5 KB, 5 views)
4.JPG
(37.1 KB, 2 views)
5.JPG
(35.6 KB, 2 views)

Part. 2
Attached Images
6.JPG
(42.3 KB, 4 views)
7.JPG
(34.4 KB, 4 views)
8.JPG
(33.3 KB, 3 views)
Capture1.JPG
(40.0 KB, 3 views)
Capture.JPG
(45.5 KB, 3 views)

Creative Zen Plus & Creative Soundblaster Audigy 4. Can the two be linked in any w

Hello and good morning. I've an extensi've collection of music consisting of 35,000 tracks which I play through my Creative Soundblaster Audigy 4 via my hi fi system. In order to access these tracks when using the Creative Zen Plus, I notice it calls up only the file name which is a time consuming effort to get tracks transferred. To your knowledge,is there a way to use the Creative Soundblaster to 'drag and drop' individual tracks straight into the Creative Zen using the 'burn now' facility?
Any help and assistance would be highly appreciated. Thank you very much indeed for your help.
Alan L.

Didn't your soundcard come with MediaSource? If so, you can transfer the tracks that have already been converted to MP3 or WMV format directly to your player. MediaSource also displays the content by ID3 Tag titles once they've been entered into the Music Library.

CREATIVE And AudigY SE MadnessS!

Similar Messages

Maybe you are looking for