Creative ASIO drivers don't work properly with Cubase LE or WaveLab6

It seems that there is some problematic "interaction" between the Creative X-Fi Elite Pro sound card with the ASIO-driver based Audio Creation Mode console (ACMC) and "connected" ASIO applications like WaveLab 6 or Cubase LE.
I was using the SPDIF output from a DVD player. I created a audio PCM wav file at 24 bit/96 kHz with every sample in both left and right channels being identical with alternate bits set in each sample like so:
101010101010101010101010
When I record this SPDIF input stream with X-Fi Elite pro SPDIF-in using the RECORD section of ACMC with Bit-Accurate record mode set, the resultant recorded file is bit for bit identical to the source as expected. Great!
However when I record using Cubase LE and a project with 96 kHz sampling rate in a stereo channel with only the ASIO SPDIF L and R channels enabled, (keeping the ACMC with identical settings in the backgroun) the resultant wave file has lots of "noise" in the lowest 8 bits or so, almost like it was dithered. The same thing happens when I record using WaveLab 6.
So this seems to mean that somehow Creative's use of the ASIO driver in ACMC is not "sharing" the ASIO input bus signal properly with ASIO apps like CubaseLE and WaveLab6. For sure, the 24 bit audio recorded by Cubase or WaveLab6 is not "bit accurate" to the SPDIF input signal. I wonder what this means for the accuracy of details in recordings made with Cubase LE or WaveLab via Creative's ASIO driver??

GI've had enough of this creative broken windows 7 drivers issue...
selling my xtremegamer and buying an asus xonar dx card, hopefully that works fine. asus seems to at least update their drivers on a regular basis. I mean, the latest win 7 creative drivers are from '09...

Similar Messages

Google maps don't work properly with ADF

Hi!
I have tried to integrate Google maps with ADF http://blogs.oracle.com/middleware/2010/06/integrating_google_maps_with_adf.html. This tutorial works good, but then I insert the same code in real ADF application Google maps don’t work properly, there are problems with zoom buttons, map doesn’t display right region but shows another one (does it with offset) etc.
Can be this issues connected with ADF Security? Or there are some other things in my project which doesn’t allow JavaScript to work correctly?

andrejs,
I just tried the tutorial (works fine) and the tutorial with ADF security (works fine). It seems to be something more specific to your application than anything else.
John

WEB Application security don't work properly with adf faces

We introduce conventional web security in our java ee application integrating ui as adf faces.
We got problem when we access protected jspx document. It seem the container don't ask the user to log on when the page did not contains any link with the model (page definitions i think). It seem that the container react lately too, after displaying part of the screen.
For example:
We have an application with a home page with two tabs representing our applications.
The home page is an unprotected directory.
The both applications home pages are in protected directories.
The both applications home pages did not contains any link to the model. Some text are displayed in showDetailHeader, panelHeader, etc
Whe we start the application, the home page is displayed. The infoUser part on the panelPage indicate that nobody is authenticated. All is fine.
When we click on the first tab representing the first application, the page is displayed and the containes don't ask to login. The page is into a protected directory. When we click on showDetailHeader, nothing is done, the content still disclosed.
When click on a menu that load a page that reference to the model part (page definitions exists), the container ask to login. After a sucessfully login, all pages are accessible, showDetailHeader work properly, infoUser part is loaded with the username for the authenticated session.
Is this due to a bug ?
Is this due to a bad design or an error in our development ?
Note that we didn't implement since yet the adf security layer may be it will solve this problem.

Hello,
when your security is based on URL, the problem could be the url is changed one click later. Check this: Re: Browser URL and current page

IPod Touch: apps (facebook, twitter, facetime) don't work properly with my wireless internet having worked perfectly before. Help needed!

I got my iPod Touch 4g for Christmas 2011 and for the first 2 weeks everything worked fine - I could download apps; use apps to their full potential; use FaceTime; use everything.
But after the two weeks, the iPod decided to no longer work as well as it had promised. First of all, it would take more than 2 hours to download a single app from the app store and then, straight after that, I couldn't connect to FaceTime (it had worked perfectly before). Then, finally, to top it all off - Facebook and Twitter stopped working on occasions. For example, I couldn't post/send messages or photos on Twitter and at the majority of the time, the News Feeds wouldn't load.
Sometimes everything works but most of the time it doesn't. I've tried my iPod at every time of the day and it makes no difference - nothing still works! Also, I don't think it is the fault of my wireless internet because I've had an iPod touch before and it worked perfectly, and the laptop that I am writing this question on also works perfectly with wifi.
The weird thing is that I have used my iPod to its full potential (everything worked fine) at my friends hosue on multiple occasions - using his wifi. I am really lost for ideas for what to do - I have uninstalled all the apps that don't work with the internet (facebook, twitter) and have always made sure that I have closed apps after using them, so that my iPod wouldn't run slow.
My iPod has been like this for over a month now, help would be appreciated

Do you have a blackberry data plan active. On your account? You need an active blackberry data plan to use the majority of data functions on your phone, even if you are connected to wifi

VS don't work properly with SBO

Hi Friends,
I need help. I develop an add-on with VS 2005. At beginning it's worked very good. To day i have modified my code in adding the CFL code in my item event. When i want to test my add-on my form load correctly but all my code in item event don't work. I have deleted the CFL code but it's the same thing. I don't know if it's my VS2005 because when i want to open my project property it's don't open.
Regards.
Olivier.

Olivier,
Have you tried your code against a different install of VS 2005?
Eddy

Slide animations don't work properly with Powerpoint 2008. Recently installed Lion.

We recently installed Lion. When my son prepared a Powerpoint presentation yesterday, slide animations didn't work properly. is there a fix for this? Thank you.

This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to Microsoft Office in any way. I suggest you post Office related questions on Microsoft's own forums for their Mac products.
http://www.officeformac.com/productforums

Maverick don't work properly with java app

I've upgraded from lion to maverick today and had to install java again. Now one of my java apps starts just like it were before, but can't see any files throught "browse" button. It shows some folders and devices without icons (just title), and don't show other files at all (no icons, no titles). Since this app is critical for my business, I'll sell macbook if I won't fix it. How can I solve it? Can I downgrade to lion?

rusmanson wrote:
Yes, it's enabled. Java applet starts, and works, but file browsing through it is not working, though it works in Firefox.
Found this on another post. Hopefully it might help:
To all Java users: remember that when you access a Java site, you are warned that some applets might be insecure. If you allow them to run, Safari might eventually block them anyway, because the applets are not signed or are known to have caused trouble. If you still wish to run them, do this:
1. Go to the Safari menu and select Preferences.
2. Click on the Security icon.
3. Make sure that the "Enable Java Script" and "Allow Java" options are checked.
4. Click on the "Manage Website Settings" button.
5. Make sure to choose "Allow Always" from the dropdown menu in the window that appears near the name of the site where the applets reside. If you only choose "Allow", some applets will not run.
Again, remember that using Java these days may pose a security threat. Whenever that happens, Apple will update the OS and disable Java.

Track ball drivers don't work with Lion

My Kensington Turbo Mouse won't work properly with Lion.
The Kensington web site no longer recognises the product, and it is only 3 years old!

Try third-party drivers as well
www.boastr.de/
www.plentycom.jp/en/steermouse
www.usboverdrive.com

HP computer will not work properly with an HP printer

I have the following two items that I am trying to use together:
- HP 23" TouchSmart Desktop, T6500 2.1GHz 4GB DDR3, 500GB HDD (Windows 7)
- HP OfficeJet 6500 Multi-Function Printer/Scanner/Fax
When I try to scan to Adobe Acrobat Professional 9.0, the document goes through the scanner, however the dialog box that I would expect (e.g. "Next Page" or "Done") never shows up. At this point, the system is unresponsive with respect to Adobe or the printer.
I suspect that it is waiting for the input from the dialog box that never showed up. I tried to move the other windows to see if the dialog opened in the background, however I am not able to select any of them (they remain frozen).
I contacted HP Support, only to have them tell me it must be the driver, and I have an "old" printer. (I did not realize that a 9 month old printer was considered "old"). I have tried all of the possible drivers that are available (original disk, downloads, other downloads from HP tech support), none of these resolves the problem.
In any case, they were unable to resolve the problem of having an HP computer work properly with an HP printer. (The printing function seems to work, just very slowly).
Has anyone else heard of this? Is there a resolution?

Update: I am still looking for a solution to this problem - the scanning portion of the Multi-function OfficeJet 6500 does not work properly with the HP TouchSmart computer.
I have not been able to find anyone in HP that can tell me when (or if) new drivers will be released for this printer.
I decided to investigate upgrading to a newer version of printer since HP told me the 9 month old printer I have was "obsolete", only to find that the identical printer is still on sale in many stores. Hmmm....
I feel like I am getting the run-around from HP.
I have since tried several more driver/software combinations, but every time I have the same problem (as described in the previous post).
If anyone has any ideas or suggestions, I would be most happy to hear them.
Thank you.

Satellite Pro L20 doesn't work properly with USB Fast Track audio i.f.

Hello!
I have used my Fast Track USB on new Toshiba Satellite L40 and I never had problems with it. I could set low latency and I did few songs with it.
Yesterday I bought another notebook, thinking of home recording studio. It's used Toshiba Satellite Pro L20. It doesn't work properly with my interface. When I listen music on Winamp or do anything on Fruity Loops I hear loud clicks, pops, noises. They introduce samples, or they appear during playback or after a sample is stopped.
I noticed, drivers for Satellite Pro L20 are a problem. Its not supported by Toshiba anymore?! The only drivers for chipset are very old and you can download em only from Toshiba website. The chipset is ATI Xpress 200M. Its drivers are with graphic card. Recently I noticed you can download "ATI Catalyst Legacy Display Driver for Windows XP - Motherboard/IGP Drivers 9.11" and CRACK IT to make it possible to install on mobile unit such as L20. Yep its funny but its impossible to do otherwise!
things I have tried and they still not help:
# drivers replacement, original were released in 2004. I installed recent version.
# driver settings, low latency, high latency
# asio and different settings
# pluging the interface to another usb socket.
# trying what happens when I use battery and when I use adapter
# updated bios
# turned off onboard units such as wifi card, sound card
# checked IRQ list
pops still appear.
my config:
Toshiba Satellite Pro L20
Win XP Home SP3
Celeron M 1,5GHz
896Mb ram
M-Audio Fast Track USB, drivers: 6.0.2
Kind regards

Thanks for answer. I still have L40 but I try to run my homerecording on L20. The L40 is now used by whole my family. It's possible to swap them but there's a problem - L20 has Norway keyboard and I'm the only person at home who doesn't often look down while typing. In Poland, we use standard ms keyboard. I'd buy special stickers, it's about only to make special chars get back to their places.
I installed Windows on this computer end set it to best performance possible.
Since I created this thread, guys from M-Audio support tried to solve my problem - nothing helped. I think potential solutions are exhausted.
Message was edited by: lidia.pochron

TB display devices don't work properly under windows

I went out and picked up a TB display last night to pair with my 2011 mbp. I live in windows about 80% of the time and expected there to be no issues with the basic usb hub built into the display – unfortunately that does not seem to be the case. My Apple usb keyboard (also brand new) and dell usb mouse both hang/freeze/work erratically when connected to the back of the display, as does my Jabra pro headset.
I can make the behavior 10 times worse simply by using hardware built into the display, such as the display's facetime camera. If I fire up Lync and start a video chat, my keyboard and mouse become nearly unusable. My basic testing under Lion appears to confirm this is an issue with Apple’s boot camp drivers as things work properly under OS X. Problem occurs both with win7 and win2008r2, I have rebuilt both OSes twice to confirm.
The firmware/drivers of the display itself appear to be the problem. The peripherals work fine plugged directly into the laptop. Thunderbolt itself appears to be the root of the issue, as the facetime camera exhibits the same pauses/lags even with no peripherals plugged into the display (unless the facetime cam is a usb device and not a pci-e device, in which case perhasp the usb implementation is to blame). Hope there will be a firmware/driver fix soon.

I have marked this as answered as it was more a post to help others who may have experienced the same problem I did and didn't get a reply or just didn't know that this program could be the reason their Windows Mail has issues that can't seem to be resolved any other way apart from ignore them and hope they don't get worse.

Help, web cam is not working properly with win vista

Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its
lenovo easy capture 2.5...so if u cud suggest me anything...
Moderator note; subject edited

re-install drivers and try again. ( also easy capture )

Desktop SMS and Windows Mail don't work properly together

Hi
thought I would post there here as been having some issues with my Windows Mail but my desktop computer doesn't suffer same issues and on a Vista forum where I posted my problem a couple of very helpful told me who to try solving the issues.
One of them suddenly realised I'd said my laptop was a Toshiba and apparently the Desktop SMS and Windows Mail just don't work properly together so the person suggested unless I use it to uninstall it apparently amongst the technically trained its known that these two programs don't like each other and would explain why my desktop doesn't have the issue but laptop does.
After resetting the Windows Mail (tutorial on a vista site http://www.vistax64.com/tutorials/) Touch wood don't be put off by vistax64 as site does both 32 and 64 and followed Brink's excellent resetting Windows Mail (didn't restore any mail) and then uninstalled Desktop SMS and touch wood no more mail issues as has been giving me problems virtually daily with marking draft emails as read/sent.
So had to click on forward then delete those bits and finish email to send it and touch wood since doing these two things as soon as send an email to draft or outbox get the number of emails in the brackets whereas before this wouldn't happen unless I closed the program then reopened it.
Hoping these solutions have fixed my problem and wanted to share it with anybody else who wants to read this thread and would recommend the Vista 64 site as they're all really helpful over there and speak in non technical terms for those of us not technically trained.
Debbie

I have marked this as answered as it was more a post to help others who may have experienced the same problem I did and didn't get a reply or just didn't know that this program could be the reason their Windows Mail has issues that can't seem to be resolved any other way apart from ignore them and hope they don't get worse.

Win 7 VPN Client 5.0.07 no longer works properly with Citrix DNE Update

Since Cisco Systems VPN Client does not work properly with mobile broadband on Windows 7, we've been successfully using Citrix's DNE Update to fix this for about 6 months. All of a sudden, machines with the DNE Update stopped working properly over VPN (whether using mobile broadband or not). The only fix is to unbind the DNE Lightweight driver from your network adapters, uninstall the DNE Update and reinstall the VPN Client. However, then you cannot use an aircard with VPN as the DNE Update was the fix.
Symptoms of the VPN issues with DNE Update:
-web pages displaying garbled
-internal web pages not rendering at all
-remote connectivity not working (VNC)
-RDP connects then crashes with data encryption errors
The only change that I can identify on our machines and in our environment would be Windows updates, but I've been unable to identify which one might have caused the problem.
Has anyone encountered this issue and found a fix? Does anyone know of another reliable fix for VPN Client to work with Windows 7 and aircards?
We're looking at moving to another VPN solution but that will take time and we need a more immediate solution.
Thanks in advance for your help.
Tony

Hi Prapanch
No offence . . . . but you need to read the complete thread before posting re:IP address & gateway
I'm not posting head end config because the config works with XP
There are no W7 specific parameters with ASA 8.3(2)
Multiple W7 machines have been used to test this.
We are looking at extracting level 15 logs from the client end - I will post if they don''t give an obvious answer.
TAC still not able to resolve this.
Rgds
Barry

Will Dreamweaver CS4 work properly with 10.6.1 Snow Leopard?

Hello
Can anyone tell me please, if Adobe Dreamweaver CS4 work properly with my MacBook OS 10.6.1 Snow Leopard? Adobe state "Mac OS X v10.4.11–10.5.4" in the system requirements, but does this mean, in practise, that Dreamweaver will not work properly with Snow Leopard?
I have tried to find info about this here, but have spend ages wading through masses of complaints about various applications crashing for people after they upgraded to 10.6.1 Snow Leopard. Personally, touch wood, I've had no problems with Snow Leopard, but I only really use it for Internet surfing and word processing (my work, music stuff on Logic Pro 8, is done on my Mac Pro which came with Leopard and which I am NOT upgrading - not yet!).
I have also attempted to get an answer from Adobe - I 'phoned their "Pre-sales enquiries" number 0800 028 0148 (in the UK) and spoke to someone who sounded as if she was on the moon and who clearly had absolutely no idea what I was talking about. I gave up with them! They didn't give an email address to ask on.
I'd be very grateful if anyone can give a clear, authoritative answer please - if possible.

I've been a Mac user since 1987 and have never upgraded the OS too soon after a new version was launched. Any new OS, like new houses, will have a 'snagging list' - unforeseen problems that arise and need to be sorted before your purchase is truly habitable and functions as expected.
But the stability of OS X 10.5 paved the way for my lapse of judgement when I upgraded to Snow Panther last week, while its compatibility with some major software is still clearly too buggy.
I've been using Dreamweaver (DW) CS4 successfully on OS X 10.5 for some time. Since installing OS X 10.6.1 I now have problems with DW, which I've alerted Adobe to.
When using Design View in DW CS4, any formatted text - from html tags to css tags - disappears from the Design view. The code appears correctly in the Code window and even if you highlight text that has coding attached in Code view - eg text with a url link attached - the Design view continues to ignore it and removes the text from its view. I've discovered that my heading tags (h1, h2, etc) all make the text disappear in Design view in a way that would be the envy of members of the Magic Circle! The only thing that seems to get through is text that is surrounded by paragraph tags.
Thing is that 'Preview in Browser' shows the page correctly (except in Opera, which I've only installed since installing Snow Leopard, so I can't say how this displayed in the previous OS versions).
Also when I upload the site to the server it all seems to display more or less as it should.
So currently it seems that DW CS4's Design view is no longer WYSIWYG! Expect to find lots of text hidden in Design view and have to use Code view much more.
It would be nice to think that Apple and Adobe would talk to each other and work it out between them.
re: Dreamweaver, I'd check back to Adobe.com regularly to see when they upgrade the OS requirements to 10.6.1 (I hadn't spotted before I bought Snow Leopard that they only go up to 10.5 in their OS recommendations).
My advice if you're thinking of upgrading to Snow Panther: delay it until it more of it works compatibly with your major applications. Check the OS spec from each software manufacturer first. Meanwhile I'll just have to wait patiently for Apple & Adobe to get their act together...
Message was edited by: bcmartin

Creative ASIO drivers don't work properly with Cubase LE or WaveLab6

Similar Messages

Maybe you are looking for