Creative Audigy And Speak System Not Loud.

I built an entertainment computer, running Windows Media Center 05, back in June. The entire time I've had it, it's been very quiet as far as the sound goes. I've finally had it, so I'm trying to get some help. The system is an AMD 2800+ with 52MB RAM; I have an Audigy 2 ZS and a "Creative Inspire P7800 90 Watts 7." Speaker system. To hear movies, mp3s, music videos, and so forth, I must turn the PC volume all the way up as well as the little wheel that is attached to the subwoofer all the way up. I still continually have friends complaining they can't hear movies when we're watching them... How can I get these systems to play louder, as I feel they ought to be doing by default?

...just use the normal stereo output (green plug) for 2. speakers. Despite the name, there is no separate "sub" input on ANY 2. speakers on the market: they all work with a stereo signal, and the sub channel is separated by a low-pass filter inside the speaker's amp itself.

Similar Messages

How to interconnect Creative 7.1 Speaker system to

HI All,?I have bought a Creative 7. Speaker system. I have connected it to my TV using the Audio Out (left & right) to the Auxiliary In of the 7. speaker system and now only 3 speakers are producing the sound. The center and the surround speakers have no output. Please guide me on how I can interconnect this 7. system with my TV and get the speakers working. Thanks in advance.Chris?

Headphone jack on all current Mac models (include latest aluminum iMac) doubles as SPDIF digital optical output as well. In other words, both analog (for headphone/line-out) and digital audio outputs are built into the same combo jack. Same analog/digital implementation for the audio input jack. Alternatively audio output can be sent through USB bus in digital form to external decoder. Thus unlike PC, the compact iMac does have many extra features already built-in.
All you need is an external 5.1 decoder to decode 5.1 digital output from headphone jack or USB port into analog format with three analog outputs for Creative Inspire T6060 5.1 speaker set (woofer/centre, front L/R, surround L/R). The only such decoder I have come across is Tutle Beach's Audio Advantage SRM (www.turtlebeach.com) though there are many surround audio decoders/receivers (mostly with SPDIF optical outputs) on sale in audio equipment shops. Take note that Creative Inspire T6060 is active speaker (amplifier built-in) whereas outputs from some surround decoders/receivers are meant for passive speakers. The difference is between low line level outputs (for active speakers) vs high amplified outputs (for passive speakers).
Optical Toslink cable with two different connectors on both ends (standard Toslink / 3.5mm Mini Plug) is required to connect between headphone jack output and external 5.1 decoder input. In case when USB port is used, any good USB cable built for peripherals (printer, external drive etc) will do.
Since I never play game and hardly watch movies with my new aluminum iMac, only good stereo audio is required for music appreciation with following setup:
iMac USB port -> Firestone Fubar3 DAC -> Firestone Tube Head Pre-amplifier (vacuum tube) -> Harman Kardon SoundStick2 speaker
Hope the information will help.

D200 Creative Wireless/Bluetooth Speaker system question?

Is the iPhone 4S and iPhone 5 compatible with the D200 Creative Wireless/Bluetooth Speaker system? I understand it says, "all other bluetooth enabled devices". Just want to make sure...thanks.

hi Adtrix,
Can you try making sure that the bluetooth driver from Lenovo support site is installed,
If your system is running Windows 8, Check the Lenovo Energy Management 7 version is installed. If not
uninstall the Lenovo Energy Management from Control Panel / Programs and try donwloading this.
Lenovo Energy Management Software 7.0
cagt26ww.exe
21.2MB
After installation
try hitting Fn+F5 and check the if bluetooth radio status is "ON'
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Does the iPhone 4S volume speaker is not loud?

Doed the iPhone 4S volume speaker is not loud?

If you are asking for the relative volume of the speaker, it should be loud enough to make calls in a quiet to moderately loud room via speakerphone or otherwise.
If you are asking if it is normal for sound to only come out of one side of the speaker at the bottom of the phone, then yes. One side is the speaker, and the other side is the microphone.

I am using laptop hitting and slow system not working

i am using laptop hitting and slow system not working and very late opan file browser every think . plez help me

Hi,
Shut down the notebook. Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Bios option ( usually f10 ) and under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Note: If the option to run these tests is not available in the Bios Menu, use the f2 diagnostic menu instead.
Can you also post back with the following details.
1. The full Model No. and Product No. of your notebook - see Here for a guide on locating this information.
2. The full version of the operating system you are using ( ie Windows 7 64bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Change and transport system not configured

hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
Madhu

Hi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v

I just signed the creative cloud, and I'm not getting to use the purchased software. thank you

I just signed the creative cloud, and I'm not getting to use the purchased software. thank you

Rodrigo_1405 do you receive any specific error messages? For information on how to install the Adobe Creative applications included with your membership please see Creative Cloud Help | Install, update, or uninstall apps.

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

Hello, sent me the email canceling my account creative cloud, and I did not cancel the account, I do not understand the reason for the cancellation was because term option than 1 year and not yet completed.

There is payment related issue, I have send you a personal message, please respond as requested.
I shall raise a request to the digital river store from where it was purchased.
I am from the Customer care Team.
Regards
Rajshree

Microfone and speaker is not working most of the times

Microfone and speaker is not working most of the times. But after restarting it sometimes it works and again everything gets mute

Hello there, Paras1111.
The following Knowledge Base article offers up some great information for troubleshooting issues with microphone and speaker. Feel free to review the links under "Acoustic-speaker/microphone/receiver:"
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Creative Audigy and M-Audio Studiophile LX4 Prob

Hi
I build computers but I hang my head in shame at my knowledge of sound cards in my computer I have an Creative Audigy sound card and I have just purchased the M-Audio Studiophile LX4 2. speaker system.
I?m having a problem hooking it up as at the moment the sub is running of the left and right inputs. If I plug the sub input into the digital/audio out like I?m supposed to it doesn?t do any thing. I have CMSS enabled so I know it'ss not that.
Can any one help me?

...just use the normal stereo output (green plug) for 2. speakers. Despite the name, there is no separate "sub" input on ANY 2. speakers on the market: they all work with a stereo signal, and the sub channel is separated by a low-pass filter inside the speaker's amp itself.

I am using creative cloud and it does not sync between my two computers

I have two macs running Adobe Creative Cloud services. However, when I save files to my creative cloud from either computer they are not available on the other computer when accessing the creative cloud . They don't sync instantly like Dropbox- which I am hoping to replace with Creative Cloud. Is there a solution? Again I am wanting to upload files from either computer to Creative Cloud and have them instantly available.
Thank you,
Dave

Ok. Never mind. I figured it out.

A4H and HDB systems not starting in SAP MMC for BW on HANA trial

Hi,
I followed all the steps to create an account in AWS and activate a trial version of SAP BW 7.4 on HANA and SAP BO 4.1. The instance activated correctly in the SAP CAL with a green status. The instance was created in the region us-east-1c. I am currently in Australia.
But when I logon with the remote desktop, and go to the SAP MMC, I see that the A4H and HDB systems have not started and are not green. When I try to start them manually I get the error below. Please help. My SDN userid is P052405.

Hi All,
The error was fixed after I rebooted the instance in the SAP CAL.

Can CHARM be activated if QA and Prod systems not defined yet?

Hi All.
We are starting to upgrade our system from CRM 4 to CRM 7.
Is it possible to setup/activate CHARM to manage transports for the CRM 7
system eventhough we only have a development system at the moment.
Our Basis Team will start defining the QA system next week and later the prod system.
I remember that when CHARM was activated on the CRM 4 system, the SolMan consultant mentioned that the environment (dev, QA and prod) should be all defined before activating CHARM. Is this true? Can we just define a dummy client?
Thanks,
Tess

Hi Tess,
yes, it is possible.
Via transaction SMSY you can describe the planned Q- and P-System at first as 'virtual'.
Create transport routes with transport buffers as you would do for existing systems.
For experimental purposes we connected our IDES-System to our development SolMan system.
In this environment we could map such a ChaRM-configuration.
In the meantime we practiced it in our production SolMan system, too.
Best regards
Horst

IPad speaker volume not loud enough

It seems to me that my iPad (latest model / software as of this date) speaker volume could be louder. Other family members have the new Mini's and they have much more volume, as do our iPhones. Is there a way to increase or improve the speaker volume on the iPad?
Thanks!

I have yet to receive my ipad 2 yet, but I'm sure the physical design of the case has something to do with it.
The ipad 1 emits to the side, where as ipad 2 emits toward the back. Movies have a very dynamic volume range compared to music, and I've found even on the ipad 1 that the volume could be louder, especially if there's existing ambient noise.
If I didn't have my earbuds, I would cup the speaker with my hand to direct the sound foward... not sure how well that would work with the ipad 2.

Help Random Crashes and Restarts System Not Stable

im having stability issues in my new system...especially when running 3d games most of the time random restarts and crashes.....this is my system specs
Msi Neo 875P
P4 1.8 533 northwood
256 kingston pc2100
256 k-byte pc2100
(both rams on A channel 2.5v setting)
Ati9800 pro
120 gig wd 7200 RPM
60 gig WD 7200 RPM
(both on ide 1)
DVD Rom
DVD burner
(both on ide 2)
Ata controller
120 gig seagate 7200
120 gig seagate 7200
Hercules 5.1 Sound card
Thermaltake Case
400watts PSU
using windows XP SP1 fresh install..using the latest ati drivers...bios is stock and ram settings set to auto ...the voltage is set to 2.5 and dynamic overclocking is disabled... performance set to slow...using single channel on memory....they say its the memory thats having the problem having 2 diff brands??or the motherboard is picky when it comes to memory modules??i cant use ddr400 coz it requires 800mhz FSB and that will cost me more buying a new processor.....the airflow in the case is working fine...i hope you guys can help me thank you very much!!!

this is my power supply and some information about it
P4ATX-400W Dual Fan
Switching Power
AC INPUT: 115/230 Vac~ 14/7A 60/50Hz
DC OUTPUT :
COLOR BROWN RED WHITE YELLOW BLUE PURPLE BLACK GREEN ORANGE
DC +3.3V +5V -5V 12V -12V +5V-SB COM PS-ON PW-OK
OUTPUT 20A 40A 0.5A 17A 1.0A 2.0A RETURN REMOTE P.G.
+3.3V and +5V max Output 240W, Peak Surge Max Output 436W
Features
High efficiency
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Reset table power shut down
Approved by UL, TUV, CB & CE
INTERNAL 12 VDE fan
Complies with FCC part 15 subpart J Class B at 115VAC operation & CISPR 22 Class B at 230 VAC operation
100% burn-in under high ambient temperature(50¢J)
Vacuum-impregnated transformer
MTBF:100K hours at 25¢J
100% Hi-pot tested
FULL RANGE 100~240VAC
Input Characteristics
Voltage: 95-132 VAC or 180-264 VAC switch able
Frequency: 47 Hz TO 63 Hz
Input current: 10 amps maximum/ 115 Vrms,60 Hz. 5 amps maximum /230 Vrms,50Hz.
Specification
Remote ON/OFF Control: The power supply shall accept a logic collector level which will disable / enable all output voltage (excluding +5V standby).
Temperature range: operating 0¢J~50¢J, storage -20¢J ~ +80¢J
Temperature coefficient: 0.01% / ¢J
Transient response: output voltage recovers in less than 1 ms max. following a 25% load change
Hold-up time: 16ms minimum at full load & nominal input voltage
Dielectric withstand: input / output 1800 VAC for 1 second, input to frame ground 1800VAC for 1 second
Humidity: 5~95% RH
Efficiency: 65% min. 70% typical, at full load
Power good signal: turn-on delay 100 ms to 500 ms
Overload protection: 150% max.
Inrush current: 60A cold , 80A ware at 132 VAC
Over voltage protection: +5V output : 6.5V; +3.3V output: 4.6V;+12V output: 15.5V

Creative Audigy And Speak System Not Loud.

Similar Messages

Maybe you are looking for