Creative Centrale DLL error

Hi, i'm unable to use the last version of Creative Centrale Software with my Zen X-Fi2 6GB (last f.w) because it crashes as soon as I try to browse player's folders. I'm using a PC with Windows XP and the error talks about mscvrt.dll and centrale.exe files. I DO need help!!!

rayodo wrote:
I have a similar problem. I installed the Create Centrale for Windows 7 and it crashes as soon as I start it. Any info on that?
What specific player (model) do you have? If you have the same model as the thread starter, can you try installing the Creative ZEN X-Fi Starter pack .6.02 which bundles the Creative Central for Windows 7?

Similar Messages

ZEN X-Fi 16 GB : error during Creative Centrale Installat

Hello, sorry for my bad english, i'm a French guy.
Got an error :
Exception processing Message c000003 parameters 75afbf9c 4 75afbf9c 75afbf9c?
during Creative Centrale installation (with CD or with downloaded file)
I don't undestand.

Hello Bonita,
Welcome to Creative forums!
Try my suggestion on this thread. Refer here on how to boot from the recovery mode. Hope it helps.

Creative Centrale won't o

Hi
The Creative Central software don't start.
No error message from the software but here the error report of Windows.
AppName: centrale.exeAppVer: .0.8.0ModName: discpmgr.dll
ModVer: .0.2.0Offset: 000046fd
I found forums where other people had same problem but no solution. The reader Xen Creative X-Fi 32 GB works very well. If someone has encountered this problem or a solution to offer me, I'm taker.
Tx for help.

Hi. I've the same problem (but i own a creative zen mozaic) i'd installed the update but it didn't work. I've tryed other solutions i've read in different places (like upgrading quicktime,installing centrale from a cleanup windows or reinstalling wmp) but none of them worked. Can anyone give me a solution or at least suggest me other things to try?
Edit: I didn't have time before but i've now so i'll give you system information in order to get some help.
I'm using windows XP 32 bits SP3 in spanish fully upgraded (but without IE7) and AVG as antivirus.
I'd to manually install the MTP porting kit in order to get the pc able to recognize the player when i plug it.
The creative centrale media server service is set to manual
Message Edited by veryhappy on -8-2008 02:0 AM

After Effects cc not starting due to optix.1.dll error or not designed for Windows

Hi support team,
                       I cannot open after effects cc due to a problem with a optix.1.dll error . Attached is a sreen shot. I suspect is the nvidia video card that has problems.
Anyone one has the same problems? Any solutions for this? Thank you.
Regards,
Elias Lo

Hi Todd,
           Thanks for your reply. I managed to solve it by reinstalling the After Effects CC. This error occurred when I haven't updated my laptop , especially the video card updates. Therefore , optix.1.dll is only 0kb as a file , in the support file for AE cc.
              I hate the GeForce experience by Nvidia. One of its updates caused Windows to prevent starting. I have to reinstall Windows and reinstall Adobe Creative Cloud, hence the issue. Thanks Todd , will always be an Adobe supporter.
Regards,
Elias Lo

Creative Central

Hi everyone, first post and first mp3
While waiting for my Zen X-Fi 6GB to arri've I have transferred my CDs to Vista "music" [to save time] but have found a slight problem:
With Creative Central when opening a file from music the tracks appear in random fashion e.g. [2.5.3.4.]and not as in the folder [.2.3.4.5] this is not in all cases what is wrong

I From the Rescue/Recovery mode do a Cleanup>Reboot on the player. It scans the disc for errors,broken links ect. does not erase files. (I would not mess with the firmware) http://forums.creative.com/showthread.php?t=208

DVD Video DLL error on x-fi fatal1ty Entertainment Cen

Hello!
When i start a dvd from Creative Entertainment Center i get an dll error! need some help!
btw, i have the latest drivers for my x-fi fatalty fps!
Thanks!
<IMG src="http://centraldata.no.sapo.pt/erro.JPG">

bratboy , thanks for you support but i already had uninstalled all drivers and my dvd player ( PowerDVD ).
With powerdvd installed it gives me the dvdvideo.dll error and without it nothing happens when i play an dvd!
I have an idea ... i enabled the option to take control of windows applications with Remote C. of x-fi, and now i can watch a dvd with powerdvd and control all menus! :/
Maybe when i format OS or when came out new drivers for Linux i will solve my problem Message Edited by PiolhoSM on 08--2006 04:56 AM

Can't install Creative Centrale?

Can't install Creative Centrale?> I just received a Creative Zen Mozaic 6GB as an early birthday present (YAY!), but couldn't use the installation CD that came with it as the mini CD won't sit in my vertical tray *rolls eyes*
So I downloaded the Centrale software from the website, and when I tried to install it I got the following message:
"Your version of Windows Operating System is not supported by Creative Centrale. Please upgrade to Windows XP Media Center Edition 2005 or later versions before resuming installation"
?The packaging says that it's compatible with MS Windows XP Service Pack 2 or higher.
My computer is Windows XP Media Center 2002, Service Pack 3
So according the box I ought to be able to use the software included, but I can't actually use the disk provided; and I can't use the software I downloaded from the site (is this the same as the one on the disk?).
Any ideas on how I can get Centrale to work on my PC? Clearly upgrading my operating system is out of the question! ?

Link for Download & Install & Setup & Activation problems may help
-Chat http://www.adobe.com/support/download-install/supportinfo/
OR
-http://forums.adobe.com/community/download_install_setup
-http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
-http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
-http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
-Server won't connect https://forums.adobe.com/thread/1233088

Creative Centrale Help.

C. I've had my MP3 since November and it's been working fine but over the past two days it has been impossible to open Creative Centrale. It keeps telling me:
Creative Centrale has encountered a problem and needs to close.
I've debugged it about ten times now. Unintalled and re-installed the program and sent countless error reports but nothing is happeneing. What on earth do I do?

Uninstall it & use Windows Media Player it's already on a Windows computer. Creative Centrale is not the best software. Lots of problems. Media Monkey is another

Creative Centrale Does not work

Hi everyone!!
I've tried installing the Creative Centrale several times but everytime i try to start the application it says that the program needs to shut down and asks if i want to send an error report. I have quite a few videos that i'd really like to get on my new player but without Creative Centrale is there any way to do that. I also have Format Factory downloaded is there any way to use that to get the videos to work on this player?

I am having the same problems as the person who previously posted this but I do not want to transfer videos. I want my Zen mozaic to work because I cannot transfer any of the new songs I've downloaded until my Library opens up with the Creative Centrale program. I have had this Zen mosiac for several months and havent had a problem until the last 2 weeks. I tried the recovery tool but the same message board pops up saying the program cannot open and sorry for the inconvenience. Is there anything I can do?

Adobe creative cloud installation error 201

adobe creative cloud installation error 201
How to solve this problem?

Install Adobe application manager and try updating to CC desktop application.
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager : Thank You

Guide to overcome hal.dll error - disk error & other errors.

Okay to start off with - guide for installing bootcamp.
DISCLAIMER:
I take no responsibility at all - whatsoever for any damage the following steps cause to anything. If you follow this guide and then are annoyed at me in any way - don't be - you followed these steps knowing they could be dangerous to your hard drive / computer / sanity / etc. That said - good luck & these steps should work for everyone.
requirements: XP SP2 CD & a copy of parallels would be useful. Also a non-apple usb keyboard for step 1 if the apple one doesn't work during xp bootup.
1. First try the usual bootcamp assistant method. Insert the xp disk, in the setup make sure you format the drive to NTFS (not quick). If you don't get this option - skip to step 3.
2. Reboot and hopefully everything will go without a hitch. If it doesn't and you get a hal.dll error or any other kind of error go on to the next step.
3. Boot up mac os x. Install parallels desktop.
4. Insert your windows xp sp2 cd.
5. Create a new virtual machine using a virtual hard drive saved in your documents folder somewhere.
6. Configure it so that the bootcamp drive is added as an extra secondary drive in the virtual machine. (Little plus button down at the bottom).
7. Install XP onto the virtual machine - don't activate or anything, just get to the desktop stage as fast as possible.
8. Parallels will have already asked for your password to dismount the boot camp drive.
9. Double click my computer in the virtual machine, then hold down ctrl+shift and click on the BOOTCAMP partition in the my computer window.
10. Click format.
11. Select NTFS as file format, check enable compression - do not check quick format.
12. Wait till its finished and then power down the virtual machine.
------- The following steps are taken from http://communities.vmware.com/thread/114529 and were written by MandarMS from the vmware forums. I have edited the guide a little - (you'll see where). Thanks and all credit to MandarMS.----
13. (James: Close parallels)
14. Quit all applications in Host Mac OS X
15. Open Terminal utility from Macintosh HD : Applications : Utilities folder.
16. Key-in the following command
$ sudo fdisk /dev/rdisk0
17. Preferably take the screenshot of the output or Note down the output (for restoring MBR).
18. Key-in the following command
$ sudo fdisk -e /dev/rdisk0
setpid 3
Choose 07 (as the partition type)
write
Y
Restart your Mac System
(James: EDIT - BELOW IS AN EXAMPLE OF THE OUTPUT OF THE PROGRAM IF YOU ARE UNSURE OF WHAT TO TYPE IN WHERE - This confused me at first but really helped in the end - James)
For more details please check the example shown below:
$ sudo fdisk -e /dev/rdisk0 (this will help to change the MBR)
$ fdisk: could not open MBR file /usr/standalone/i386/boot0: No such file or directory
Enter 'help' for information
fdisk: 1> setpid 3 (Enter “setpid 3” press enter key)
Starting Ending
#: id cyl hd sec - cyl hd sec start - size
*3: 0B 1023 254 63 - 1023 254 63 1127792680 - 337356448 Win95 FAT32L
Partition id ('0' to disable) 0 - FF: [C] (? for help) 07 (Enter 07 Partition table)
fdisk:*1> write (enter “write” press enter key, This will change the MBR)
Device could not be accessed exclusively.
A reboot will be needed for changes to take effect. OK? [n] Y (Press Y to modify changes)
Writing MBR at offset 0.
$ fdisk: 1> exit (enter “exit”, press enter key)
19. Restart your Mac System
------ Back to me again.
20. Welcome back - your drives have just been fixed. Reboot again and insert the windows xp sp2 cd. Hold down option at startup and boot from the cd.
21. Go through the setup again - this time don't do anything to the drives when it asks you to format.
22. wait...
23. It'll reboot......
24. It'll install..... if it doesn't - skip to step 26
25. Welcome to windows, install your drivers and reboot a couple more times. You're good.
26. (it didn't work... you got the hal.dll error or something similar) Boot up mac os x again and launch parallels.
27. Start up the virtual machine - open up BOOTCAMP in my computer.
28. Click view - folder options
29. View types > make sure you can see hidden files and folders, view system files and etc.
30. Right click boot.ini and click properties
31. Uncheck read-only.
32. Click okay - open boot.ini in notepad.
33. If you're on a mac with 2 partitions: 1 mac hd, 1 bootcamp, delete everything in the boot.ini file and copy and paste the following into it:
\[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(3)\WINDOWS
\[operating systems]
multi(0)disk(0)rdisk(0)partition(3)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
Obviously change the name to suit. Save it and reboot - you should be good to go now.

Hi. Your bootcamp drive should be drive C. It shouldn't matter what drive letter it is really, you make the virtual machine disk as a virtual disk saved in your documents folder and hook it in to use your physical bootcamp drive.
Ensure you've typed in the correct command and correct password. Press enter after you type in the password. You won't see it as you type it in, and you may need to wait some time afterwards before you'll see the next prompt. Leave it 2 minutes.
Sorry I've been abroad.. hope you have it worked out by now anyway mate.

NI 5660 Driver DLL Errors when using Teststand 2010 and LabVIEW Run-Time Engine 2010

This problem seems similar to the post "Resource not found error in executable on development machine." but I didn't want to repost under that thread because I only happened upon it by chance and none of my searches brought me there... so I made a more descriptive Subject.
I am working on a system that uses a PXI Chassis with a NI 5600 Downconverter and a NI 5620 high speed digitizer, among other PXI Cards.
I inherited working code written in LabVIEW 2010, running with the LabVIEW Run-Time Engine 2010. The code was using a custom executive and my task was to rewrite the test using TestStand 2010. I reused the majority of the old code. The old code used NI-5660 to control the 5600 and 5620. When I run my sequence using the LV Development System and TestStand, it runs without any issues. When I change the adapter over to LabVIEW Run-Time Engine 2010, all of my NI5660 VIs become broken due to DLL issues. It warns that the nipxi5600u.dll was not initialized correctly. Many of the errors are associated with the NI Tuner and NI Scope. After this LabVIEW will crash randomly, and the seqeunce will not work in TestStand even when back with the LV Development Adapter. The only way to recover after this is to restart the computer - TestStand automatically reverts back to the development system, the VIs are no longer broken and the sequence works again.
I have all of my VIs associated with a project. After reading a little bit about DLLs and TestStand, I found all of the DLLs in the dependencies section of my project and added them to my TestStand workspace. I also used Dependency Walker to track down the problems with the nipxi5600u.dll, the 2 DLL files that it said were not found already existed in the same folder as the original DLL (C:\Windows\System32). I have also performed a Mass Compile to make sure everything was running in LV 2010. If I skip the steps involving the 5660, my entire sequence runs fine.
The previous code was running with the LabVIEW Run-Time Engine without any issues. Is there just a step I am missing? Has anyone seen anything like this before? I can send screenshots of errors to provide more detail if necessary.

I have tried some more things and still can't get it to work. I have added the VIs mentioned in the Notes On Creating Modulation Executables KB both to the TestStand workspace and the LabVIEW project holding all of my VIs. This did not change the results.
When I try to run my sequence, The first error I get is shown in Error 1445.bmp. This happens when I try to use the NI 5660 initialize.vi. If I click ignore, the next error I see is shown in Error -20551.bmp. When I try to open the VI to look at it, I get the 2 DLL errors shown in Error loading nipxi5600u.bmp and Error loading nidaq32.bmp. When I close TestStand, I get the error LabVIEW Fatal Error.bmp.
Attachments:
Error1445.JPG ‏164 KB
Error -20551.JPG ‏174 KB
Error loading nipxi5600u.JPG ‏9 KB

Hello, I have windows 7, Im getting msvcr80.dll error 7(windows error 126) when I tried to update my itunes. Now it won't open. Does anyone have a remedy? And when I try to uninstall it says that the file cant be found.

Hello< I have windows 7, I tried to install the new itunes version, last night 1/30/14, Im getting msvcr80.dll error 7 (windows error 126). Does anyone have a remedy for this? When I try to uninstall the ituned program it says it can't be found and to make sure I have permission to uninstall.

Same problem today. Took five times to reinstall without any error messages. I did the following:
1) Went to the C:\program files (x86)\iTunes and C:\program files\iTunes folders and moved every file ending in .dll to the desktop (even if two files in same location had the same name, just replaced)
2) Restarted computer and still got error message
3) Uninstalled all apple programs possible in the following order......itunes, apples software update, apple mobile device support, bonjour, and apple application support.....all performed using the microsoft control panel
4) put all the .dll files on the desktop in the trash and emptied (this is a step apple support did not recomment in their posted solutions but for a final try I wanted to delete everything apple).
5) Restarted computer.
6) Re-installed itunes from apple website
No error messages during re-install and was able to open shortcut in one try.

Server 2008 R2 Terminal Server c0000005 and c0000006 errors with KERNELBASE.dll error in RDP sessions.

We installed a new Server 2008 R2 server this spring. It is configured as a Terminal Server with 16 Wyse t10 thin clients connecting with RDP. We are a small resort so we run Springer Miller Host and SpaSoft. Ever since moving from PCs to the thin clients
and TS we have been seeing SpaSoft randomly crash with KERNELBASE.dll errors and also a lot of c0000005 and c0000006 errors. Springer Miller support says its a Microsoft Networking issue so no help there. The company we worked with to install this has no clue
so I hope to reach out to this community to solve this. I can also open support case with Microsoft Support but I am not sure if they will be of any help. Here are some examples of the errors:
"Event 1000
Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
Exception code: 0x0eedfade
Fault offset: 0x0000c42d
Faulting process id: 0x3718
Faulting application start time: 0x01cf9ac7922487e9
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: cfdcf9a9-06ba-11e4-a5af-000c298d9aa5"
Also:
"Faulting application name: VH.EXE, version: 18.80.430.0, time stamp: 0x3f73b447
Faulting module name: VFP8R.DLL, version: 8.0.0.3117, time stamp: 0x3f73c232
Exception code: 0xc0000006
Fault offset: 0x0001d598
Faulting process id: 0x2bc8
Faulting application start time: 0x01cf99297ee1742f
Faulting application path: J:\HOSTPLUS\fxp32\VH.EXE
Faulting module path: J:\HOSTPLUS\fxp32\VFP8R.DLL
Report Id: 5fbc65c4-055c-11e4-a5af-000c298d9aa5"
And:
"Faulting application name: SpaWin.exe, version: 3.4.0.0, time stamp: 0x2a425e19
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process id: 0x2aa0
Faulting application start time: 0x01cf988e6770e619
Faulting application path: \\spasoft\spaapps\TermServ\SpaWin.exe
Faulting module path: unknown
Report Id: 01029179-04b9-11e4-a5af-000c298d9aa5"
There are no network specific errors in any of the logs. I am thinking that SpaSoft needs to be run as an administrator but I am not sure how to do that in this environment. We have disabled DEP for all but essential Windows processes. All of the firewall
and AV has been completely disabled, and still getting these errors. Is there a way to run these applications as admin without the user actually being an admin? Should I go ahead and open a Microsoft support case? Thanks

Hi,
Thank you for posting in Windows Server Forum.
Explanation
The indicated program stopped unexpectedly. The message contains details on which program and module stopped. A matching event with Event ID 1001 might also appear in the event log. This matching event displays information about the specific error that occurred.
User Action
If an error report was generated for this error, you might be able to obtain more information about the error by sending the report to Microsoft for analysis.
Yeah, you can open a support case with Microsoft as they will help and guide you for proper solution. You can go through
this source article.
Hope it helps!
Thanks.
Dharmesh Solanki

IPod Classic Crashes randomly with ntdll.dll error

Sometimes when I plug-in my 120GB iPod Classic, iTunes would crash, giving me a ntdll.dll error, and I would need to unplug my iPod classic before it would allow iTunes to start again. Upon disconnect, the iPod will try to restart and then it would unsuccessfully do so, and then it would reboot and tell me to restore via iTunes. After I plug it back in, the iPod would restore fine. It seems that if I don't sync my iPod for a couple of days, the possibility of this error happening is most likely, versus if I plugged it in consistently every day.
I have had this issue for quite a while here are the steps that I've taken to try to mediate this issue:
-Switched iPod twice with Apple Store
-Tried the sync on two different computers with completely different hardware (but windows 7 on both)
-Made a new iTunes library
-Search the support forums/google
-Tried various cables
Here is the error logs from the most recent crash:
Faulting application name: iTunes.exe, version: 9.0.3.15, time stamp: 0x4b590a69
Faulting module name: ntdll.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdadb
Exception code: 0xc0000005
Fault offset: 0x00052bf8
Faulting process id: 0x384
Faulting application start time: 0x01cad74f5f441de7
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: a9fac431-4342-11df-9742-00238bf6c0ab
Any help would be appreciated!

OK So I sync'd it this afternoon and in the evening, I plugged it in again, and this time it caused iTunes to crash with this error:
Faulting application name: iTunes.exe, version: 9.0.2.25, time stamp: 0x4afca401
Faulting module name: iTunes.dll, version: 9.0.2.25, time stamp: 0x4afca3e5
Exception code: 0xc0000005
Fault offset: 0x00abc4c0
Faulting process id: 0x728
Faulting application start time: 0x01cad7c0e0284b0c
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Program Files\iTunes\iTunes.dll
Report Id: b9bf634a-43b4-11df-b2dc-0015f20ac1cf

Creative Centrale DLL error

Similar Messages

Maybe you are looking for