CReative Cloud Premiere Pro Family CS6 not downloading Premiere but it says it's installed

I've run the AAM install for most of the programmes from Creative Cloud, including Premiere Pro Family CS6. However, Premiere Pro is not showing as an app downloaded alongside the other packages on my hard drive (although Encore is). How can I get Premiere Pro installed from Creative Cloud?

Hi Jayne,
I would try uninstalling it from
Control Panel > Programs & Features (Windows 7)
Mac HD > Applications > Utilities > Adobe Installers (Mac OS X)
and then reinstalling it
-Dave

Similar Messages

Premiere Pro - Surface 2 - Not Downloading

I have a Surface 2 I am trying to download the trial of Premiere Pro, however it keeps telling me it is a desktop app and that I must download it from my computer. It was my understanding Premiere Pro worked on tablets. How can I download this software on my Surface 2?

You MUST have a 64bit computer... what is your computer?
MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

Premiere Pro/Prelude CS6 not working with AVCHD from Canon HF G10

I just tried switching from Final Cut Pro 7/X to Adobe Premiere Pro CS6 and have not been able to get Premiere Pro or Prelude to work with AVCHD footage from my Canon HF G10. The system runs Mac OS X 10.7.4 on a 3.4 GHz quad-core iMac with 16GB of RAM and 10Gbit/s Thunderbolt RAID for video storage. Adobe Updater ran yesterday and installed CSXS infrastructure updates which did not fix the problems.
After importing several short (less than 5 minutes each) 1080p30 clips into Premiere Pro, I can scrub over the first few seconds of a clip but afterwards it stalls or mixes in frames from the beginning of the clip. Rendering 30 seconds of video does not complete in reasonable time, i.e. takes more than 5 minutes. I figured I would try ingest the footage with Prelude and am running into the same problems. Scrubbing does not work, only the first few seconds from a clip are available. When configuring Prelude to transcode on ingest, I am getting "Import XMP failed" errors. I already spent several hours trying to figure this out. In the meantime, I finished the project using Final Cut Pro X :-\
Any help would be appreciated.
Thank you,
Niels.

Any chance this gets fixed soon? I'm shooting with an AF-100, and at this point I'm still using Final Cut to transcode my footage so I can have audio. I've also noticed the video jumps around even when it does have audio. Prelude has been extremely problematic for me, and it doesn't have a way to bring in clips that returned errors upon importing, I have to write down the clip numbers and bring them in individually. I've also tried just dropping the file structure from the card straight to the hard drive. It's a huge problem, and is keeping me from making the switch fully from FCP 7.

Creative Cloud Updater cannot update CS6 - Corrupted Download

In practical terms I am of course using Photoshop CC 2014. However as part of the CC update process, my original installation of CS6 (before subscribing to Creative Cloud) gets updated.
It now keeps failing with the following warning: "Update Failed The download appears corrupted (U43M1D204)".
Where might I find the downloaded update so I can delete it and restart the CC update process? Or is there another way of resolving it so that CC updater doesn't constantly indicate a pending update required?
Thanks

Errors 201 & 205 & 206 & 207 or several U43 errors
-http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
Or do a manual update - All updates start here and select product, read to see if you need to install updates in number order, or if the updates are cumulative for the individual product http://www.adobe.com/downloads/updates/

Adobe Media Core CS6 has stopped working (Premiere Pro Family CS6)

I have recently upgraded my computer to better run Premiere and Encore but have now encountered the error "Adobe Media Core CS6 has stopped working". The program will then boot even after I choose either of the two options that say they should close the program. They both seem to run fine after getting past the error but I would rather not have to see it everytime and know that something is amis. I have tried uninstalling and reinstalling Quicktime like some other users have suggested but I think my problem may lie elsewhere. Can anyone help me out?
Problem Event Name:
APPCRASH
Application Name:
Adobe QT32 Server.exe
Application Version:
6.0.1.0
Application Timestamp:
5043716a
Fault Module Name:
cwalsp.dll
Fault Module Version:
2.8.13.1
Fault Module Timestamp:
4f33e357
Exception Code:
c0000005
Exception Offset:
00017914
OS Version:
6.1.7601.2.1.0.256.1
Locale ID:
1033
Additional Information 1:
0a9e
Additional Information 2:
0a9e372d3b4ad19135b953a78882e789
Additional Information 3:
0a9e
Additional Information 4:
0a9e372d3b4ad19135b953a78882e789

cwalsp.dll
Find out where that's coming from and what it does, then reinstall or uninstall the program it came with. Pertinent information suggests that this may be a DLL of a DRM client for games that interferes with local ports...
Mylenium

Premiere Pro trial won't download and it isn't listed in my creative cloud

Premiere Pro trial won't download and it isn't listed in my creative cloud. It is frustrating... it says it is downloading but it makes creative cloud pop up and I then can't find it listed . I just want the trial. I have done trouble shooting on cchromeand on my computer.

See if your machine meets the system requirements for the software. CC will not list applications that will not work with the system.
Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

I can not download Premiere Pro cc or cs6

I am a member and I can not download Premiere Pro cc or cs6

Does your computer meet Adobe's MINimum requirements? http://www.adobe.com/products/premiere/tech-specs.html

After installing Adobe Premiere Pro product CS6 in the program is not active PlayBack

After installing Adobe Premiere Pro product CS6 in the program is not active
PlayBack button setting when creating sequence.
Windows 7 64-bit. Intel Xeon 2, RAM 12 MB. Mxo2

Hi,
Thanks for posting that screenshot. It appears that you have opened your Sequence Settings for a DV-NTSC sequence and have made a circle around the "Edit Settings" button.
Since you chose to create a DV sequence, you cannot change those settings.
Do you have DV NTSC clips? If so, these are the correct settings.
If you do not have DV NTSC clips, do not be concerned. Just create the sequence.
Once you drag a non-DV clip into the DV sequence, it's OK.
You have the option of changing the Sequence Settings to match those of your clip in a new dialog box.
Click "Change Sequence Settings" in the dialog box.
I hope that helps.
Thanks,
Kevin

Downloading Premiere Pro after buying not available in Desktop APP

I bougt on the 7th of september 2014 an one year membership for premiere pro.
I paid and the bill with my bank acount.
Till today i can`t download premiere pro with the desktop app for CC
All other adobe products are available including photoshop for that i also habe a 1 year membership.
so my question: Why can I not download premiere pro to my desktop?
thanks for your help!

The interface normally only lists applications for which your system meets the requirements. Check the system requirements for Premiere Pro and see if the machine comes up short on any of them.
Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html

I purchased creative cloud for my Flash CS6 class not knowing there was a difference and now I need Flash CS6 How do I change? I cant complete my project without it.

I purchased creative cloud for my Flash CS6 class not knowing there was a difference and now I need Flash CS6 How do I change?

You can refer to:
How to Move Adobe CC or CS6 Between Computers, or PC to Mac | ProDesignTools
Can I install both CS6 and CC apps on my computer? « Caveat Lector
Creative Cloud (CC) or Adobe CS6 – Which Should You Buy? | ProDesignTools
Regards
Rajshree

Premiere Pro CC does not open MOD files correctly

Hi,
I just started using the Adobe Creative Cloud as a trial, in particular the Premiere Pro CC software, since it might be relevant, I am working on a mac (completely updated as of yesterday).
I have a JVC GZ-MG505 camcorder. This device saves the video files on an internal HDD in a file format called MOD. From what I have been able to see when searching on the web, this should be nothing more than a MPEG-2 file.
So, I tried importing some video files into Premiere Pro and to my surprise, I noticed that a whole strip on the right hand side of the image is missing. The original is recorded in a widescreen (16:9) format with 720x576 pixels and Premiere Pro gives me a file with 540x576 pixels. I have tried using the Interpret Footage to change this, but it doesn't let me change the number of pixels. I also tried opening the files in Adobe Media Encoder and I have exactly the same results as in Premiere Pro. However, opening the files in VLC or mPlayer they come out exactly as expected with all the pixels there. Has anyone come accross this problem before or can anyone help me with solving this?
I could try reencoding the files with VLC, but the output file is much smaller than the input file, so I am afraid I am loosing some definition.
So, just to restate my problem, the adobe products open my MOD files without complaining, but for some reason they loose a strip 180 pixels wide on the right hand side of the image.
Cheers

Premiere Pro CC does not open MOD files correctly
That is correct: there is a bug in CC. In CS6 they work correctly.
Please file a bug report.
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
http://forums.adobe.com/message/5658455#5658455
search for mod files and you will find one or two other threads.

Creative Cloud - Adobe Application Manager...download of Flash Builder 4.7

I have a $49.95/mo Creative Cloud for the past few months and began a download via Adobe Application Manager of Adobe Flash Builder 4.7 yesterday afternoon around 4pm. It is
now 9:25am the following day...17+ hours later and the download is at 74%. ..I'm still letting it continue downloading.
In my frustration, I downloaded a non-Creative Cloud copy of Adobe Flash Builder 4.7...and on the install I am now being prompted with 3 options:
1. Install with a serial number
2. Start my subscription
3. Install a trial
As I'm paying the $49.95/mo for the full Creative Cloud subscription, I would prefer not to "install a trial". Based on the download rate of the copy of Adobe Flash Builder 4.7 via the Application Manager, it won't complete until sometime this afternoon at best.. Is there any way I can convert my non-Creative Cloud installed copy of Adobe FlashBuilder4.7 to be under my Creative Cloud Subscription?

If there is an option to License this Software then you can enter the Adobe ID tied to your Creative Cloud subscription. If not then you will want to wait until the download completes in the Adobe Application Manager.
You may also want to review Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual - http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html as something appears to be interferring with the Adobe Application Manager from downloading at the expected speed.

Premiere Pro CC will not accept MXF DNx hd files

Hello
I am trying to import Avid MXF DNx HD 36 files into Premiere Pro CC but have been unsuccessful. I thought I read that Premiere Pro CC could handle these files but have not had any luck. Are their codecs I need to download?

Don’t worry, as we know DNxHD MXF is a video codec intended to be usable as both an intermediate format suitable for use while editing and as a presentation format. You cannot import a DNxHD MXF into Adobe Premiere Pro 7.0 (CC) The file was exported using the DNxHD MXF OP1a format with a preset that uses the 440 family. If you accidentally meet with the problem, the best solution is to transcode DNxHD MXF to MOV, the format which is proved to be the most compatible one with all the Adobe products, including Adobe Premiere Pro CC.

After trial version expired and purchasing creative cloud membership programs still will not open

I keep getting "trial version expired" even though I have purchased the cloud membership around 3 weeks ago. I did the chat with someone who had me remove my cache, which did work for me to run Photoshop, but not for Dreamweaver. I installed a patch for the download manager that did not work as well. I have installed and uninstalled multiple times with no luck, and now have a project due Thursday!! Please help!!

I don't think these issues pertain to mine. There is something getting mixed up between my trail version (expired) and my new Creative Cloud subscription. Its like it can't see it for some reason. I was able to get Photoshop to work but Dreamweaver is being stubborn!! Please help my project is now due tomorrow... !! Thanks!
From: [email protected]
To: [email protected]
Subject: After trial version expired and purchasing creative cloud membership programs still will not open
    Re: After trial version expired and purchasing creative cloud membership programs still will not open
    created by Mylenium in Downloading, Installing, Setting Up - View the full discussion
Sign in or activation errors | CS6, CS5.5 Subscriptions, CS6 Perpetual Mylenium
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5162797#5162797
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5162797#5162797
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5162797#5162797. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

My creative cloud one year membership is not recongnized: All softwares are in trail version!

Recently my imac died, the hard drive somehow failed and never worked again, so I changed the hard drive completely. So when I reinstalled all my softwares, I download the creative cloud desktop app and started downloading the softwares and then noticed that everything was in TRIAL VERSION, I revise that my membership was not finished, and it was not, it ends in july but my creative cloud one year membership is not recongnized, even that I am logged in. PLEASE HELP

I place the solution for the community since it took me almost 25 days to get it resolved, I really hope that this will be able to save you some time:
My case> I logged in perfectly in my CC desktop app, the softwares recognize my account but not the one year suscription, so I was allways on trial version. This work for me>
I had a chat conversation where a really nice Adobe helper that made me change my /etc/host file, and change it's content to something I would never understand, this:
### Host Database## localhost is used to configure the loopback interface# when the system is booting. Do not change this entry.##127.0.0.1 localhost255.255.255.255 broadcasthost::1 localhost fe80::1%lo0 localhost127.0.0.1
And also erase all the files in the Library/adobe/SLStore folder .
That worked for me! hope that this will make your day a brigther one
Thank you Arunkumar!

CReative Cloud Premiere Pro Family CS6 not downloading Premiere but it says it's installed

Similar Messages

Maybe you are looking for