Creative console launcher Titanium HD Win7, not working

I just purchased the Titanium HD to upgrade from the Xtreme Audio. I have spend the whole day, and I literally mean the whole day on trying to solve;
"There are no supported audio device available. You need to close the application. Click OK to close the application now."
When trying to run the Creative console launcher. I have spend countless hours doing the installation all over again and again by different methods. I've tried with the CD in the package, I've tried the latest drivers and software from your website, I've tried to re-insert the sound card several times, I've tried to sweep the drivers with Sweep Driver 3.0 and removed all registry entries, folders and files with my Revo Uninstaller Pro, with no god **bleep** luck.
At no point in time has the driver not been working. It should be all fine - sshot provided;
http://www.myupload.dk/showfile/967847ebbe.jpg/
Sound also works. However, I do get error when installing the driver - sshot provided;
http://www.myupload.dk/showfile/967850f6ff7.jpg/
I Googled it and most seem to claim that application is not important and can be disabled. I have Googled the issue so many times, and found many people with the same issue, but who seem to get it working some way or another at the very end..... Just not me...
Though the card works I cannot access the cards features without it's software, and the card is therefore, basically uselsss. Had I known I'd run into this I would have picked the Asus Xonar Essence by miles! Although I did ask creative for help in an e-mail I'm afriad this is going to have to end up with a dispute between me and the retailer :/

Your first problem is this:
You upgraded from one card to the other. Uninstaller or not, you have a ton of remnants left over from that old card.
Try this for your no supported device:
no supported device fix
Reboot, and try again. If this does not work, then install this driver....newest for your card.
after rebooting, try again.
If that does not work, then you can manually unzip that driver you downloaded above to a temp folder (that driver is a self extracting executable).
Then you can go to device manager and choose to update driver and browse the temp folder you made above and update your driver and reboot.
See if any of these help you.

Similar Messages

  • Creative Console Launcher XFi for Win7

    Does anybody have a clue as to if/when creative labs will release Win7 compatible Creative Console Launcher Programs for the X-Fi Cards?
    This thread is intended particularly to be responded by a CL forum admin!

    I understand that you wanted an Admin response. KokChoy has responded so I wanted you to know that I am using the latest console launcher download for the card and it has worked in Windows 7 very very well. If you are wanting a "Certified" one, you are wasting your time as 2.62.00 works with no compatibility issues for me.

  • Creative Console Launcher not working after Vista Ultimate upgr

    I have a Dell XPS700 with the Creative SB X-Fi soundcard and fi've speakers. Surround Sound for MP3, WAV, TV etc Was working great under Win XP Pro SP2. Now, I can't seem to configure the rear speakers. When I go to Start - All Programs - Sound Blaster X-Fi - Creative Console Launcher, I get a "The console for the current mode of your audio device cannot be launched." message and I cannot select the Entertainment Mode.

    Actually, you need to/should update your drivers (Creative *has* Vista-ready drivers for the X-Fi, including a new Audio Console). The only cards that Creative does *not* have Vista drivers for are cards *older* than the base Audigy (the only relati'vely new card affected is the Audigy SE). The base Audigy (in fact, *all* Audigy-series except the SE) has Vista beta drivers available (and a new Audio Console is part of the package).

  • Creative Console Launcher doesn't work with Windows 8

    I trying to install Creative Console Launcher on Windows 8 x64,but i get the following error:
    error.PNG
    Unsupported with Windows 8! Without this program,my headphones Tiamat 7.1,work without bass!
    Sorry for bad english,i hope you understand me!Thank you!

    See:
    *https://support.mozilla.org/kb/windows-media-or-other-plugins-stopped-working
    There has been a change in where Firefox searches for plugins and the plugins folder in the Firefox program folder is no longer scanned for plugins, so Firefox won't find them anymore if they are installed in the plugins folder instead of the "browser\plugins" folder that Firefox now scans.
    You can set the plugins.load_appdir_plugins pref to true on the about:config page to make Firefox scan the "<install>/plugins/" directory for plugins like the WMP plugin (np-mswmp.dll).
    You can alternatively move plugins from "<install directory>\plugins\" to "<install directory>\browser\plugins\" (create this folder when missing) to make Firefox find them again.
    *http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/
    *http://mike.kaply.com/2013/04/24/major-changes-coming-in-firefox-21/

  • XFI Titanium high dpc latency after installing creative console launcher

    HXFI Titanium high dpc latency after installing creative console launcher=im using windows 7 64 bit sp(rtm) this also happens with normal windows 7 64 bit(without sp).
    when only installing the driver for the XFI titanium my dpc latency is between 0-50 with spikes that go to 90.
    this also happens when I don't have any drivers installed.(windows high definition default driver)
    however when I install the creative console launcher my dpc latency is allways above 00 and most of the time between 00-200 with spikes to +-400.
    im using PAX PCIe Titanium ALL OS Driver V3.25, and creative console launcher 2.6.49 beta.
    my question is can I use game mode without installing the console launcher?
    is there a version of the console launcher that doesn't cause higher dpc latency?

    Maybe a bad driver mod. Try Creative own drivers/CD first and see what happens.

  • "Setup has found a newer version of Creative Console Launcher on your system. Setup will now exit"

    This is the error message I get every time I try to install the Creative Console Launcher version 2.61.35 for my Creative X-Fi Titanium.
    I have uninstalled EVERYTHING, multiple times. All Creative applications, drivers, etc. Restarted in safe mode, ran driversweeper, restarted and re-installed.. No dice.
    I even downloaded CCleaner and had it nuke my registry in case it detected some files that might be causing problems.
    The weird thing is that I don't know how it is detecting a newer version of the launcher. The reason being is because the only launcher I ever installed was the one that came on the physical CD with my soundcard. The only other things I have downloaded and installed were:
    Creative Sound Blaster X-Fi Titanium Driver 2.17.0008
    DTS Connect Pack 1.03.08
    Dolby Digital Live Pack 3.00.06
    I also downloaded and ran the registry fixes that supposedly corrects the audio stuttering when DDL is enabled (I have experienced a lot of crackling/popping in Aliens Vs. Predators).
    Anyways, I can apparently access the control panel just fine, but I like the launcher, and it's frustrating not being able to install it. This all started when I wanted to upgrade my driver, so I uninstalled everything before I upgraded, then when I went to reinstall the launcher, I got that message.
    Help?

    "If the software is installed correctly, and is the right version, then the updater should recognise it when it's installing."
    Why wouldn't the software be installed correctly? I double-click on the installer .exe file and follow the instructions. If it doesn't work, fire whoever coded it!
    More seriously, these problems are all caused by Creative's ignorant policies on their software installation restrictions. I mean it's Creative Recorder, not ?2000 worth of software here - why so bloody protecti've about which PC it will install on for God's sake?
    Example algorithm for installation limited to Creative cards only: Check SBLi've! installed. Check Creative Recorder existing install. If existing, check version, and update. If not existing, install full version. Exit. Happy customer.
    Creative seem unable to follow the above logic. 666% Ignorant. I won't be buying them again.
    All the clean install instructions I have read on this site are FLAWED. They either a)require the original CD (WHY?! it's for Windows XP, wasn't even OUT when the CD was made!), and/or b)are riddled with mistakes/generalisations about what should work.
    What I'm not seeing here is the truth - Creative make flaky software as their hardware is too good for you to want to upgrade, so this poor software CONS you into thinking you need new hardware. Nice one, waste the planet some more for no help to the consumer. Evil.

  • Soundblaster X-Fi Titanium Optical Out not working???

    Hey friends,
    I purchased a Sound Blaster X-Fi Titanium PCIe yesterday to run on Windows 7 64bit to trigger VSTi instruments. I can hear the VSTi play fine when I have headphones plugged into the soundcard but I want to send the audio sound OUT via the Optical Out into my Steinberg MR86x firewire audio card. ?
    I can see the light on the optical cable but no sound seems to be being sent from the sound blaster into the steinberg card.
    ?Now before people start saying you cant do that, I have have been doing this for the last 3 years and it has been great apart from my RME Audio card is not compatible with Windows 7 64bit hence why I purchased the soundblaster.
    I really am at a loss as to what I can try next, I have been through this forum and tried a few recommended tweaks but nothing? Am I missing something obvious here?
    I am using the following drivers
    Driver: v2.7.008 Windows 7 64bit
    DTS Connect: for Windows 7 64bit
    Also in the Audio Control Panel / SPDIF I/O all options are greyed out apart from the Digital Output tickbox, I only want to use this card for Audio as in creating music or specifically for triggering VST synths.
    I would really appreciate any advice
    Thanks in advance
    KiloHurtz

    Re: Soundblaster X-Fi Titanium Optical Out not working?I have same card, same?OS?and lots of problems.
    Analog outputs(control panel->sound->speakers) disappears when boot or reboot, sometimes it works week, sometimes a hours. When it works, it's works ok, but suddenly during boot,?all sounds is lost, when trying launch for example Creative Audio Control Panel this message appears: There are no supported audio device available. You need to close the application. Click OK to close the application now.
    And when analog outputs disappears, no any sound via SPDIF, even it shows in notification area and control panel->sound and in device manager.
    I have owned card about two months, once change card in warranty, and?several uninstall, cleaning traces, reinstall and card works for while?and?out of blue, when boot computer, no sounds at all and only way to get sounds back is driver uninstall, cleaning and reinstall.
    Creative Customer Support seems to be clueless, but make Technical Support Request if problems continue. And all other too, if problems like that appears, contact to Creative, maybe they really try?to do?something abuot it and not just send instructions how to uninstall and reinstall drivers.

  • SB X-FI Surround 5.1-Creative Console Launcher !

    [color="#0000ff" size="3">Hi Everyone,
    [color="#0000ff" size="3">
    [color="#0000ff" size="3">I?recently bought the Sound Blaster X-FI Surround 5. sound card. When I installed the Installation CD which came along with it, it launched a Creative Console Launcher(Software to control Audio-Settings). Yesterday I updated the Creative Console Launcher Software through the Creative Software Auto Update option. I did it thinking that it would give me, it would add some more features to the Creative Console Launcher, but instead it seems when I updated the?latest version of Creative Console Launcher ther are?some features missing, some of the features have been removed from the latest version like for e.g. EAX effects had a lot of options like Amphitheatre, Theatre, Royal Hall etc. All these have been removed and there have been some changes in EQ Effects section also..
    [color="#0000ff" size="3">
    [color="#0000ff" size="3">My question is What is the difference between the Creative Console Launcher which is installed at the time of installing the Installation CD and the Creative Console Launcher which is updated through the Creative Software Auto Update option. Which one should one go for. Which is the best one.
    [color="#0000ff" size="3">Cheers !

    I see. So that's the reason. Since that the software doesn't work on the X-fi surround 5., does that means that using an optical connection wont have any difference with the direct analogue connection?
    By the way, I have a USB X-Fi Surround 5. and the logitech z5500d. Initially, I'm trying to maximise the potential of the speakers using the software and optical connection. Now that the software is not compatible, any suggestion on how to do it's
    Any suggestion on which type of connection to use (digital or analogue)?
    If digital, please provide me with the link to the suitable cable.
    Thanks

  • VoiceFx tab is gone, need help!! creative console launcher.

    Hello!
    I have the Creative Sound blaster X-fi Fatalty titanium champion card.
    In my old computer with win XP 32bit, the creative console launcher window had a setting for microphone in the "game mode" window to enable the voiceFX to change my voice.
    But with my NEW computer with win 7 64, i kept the exact same sound card cause i think its awesome, everything works great exept the microphone tab dont show, its just have the tabs named
    "headphones",
    "SPDIF/O",
    "Digital I/O" and
    "Encoder"
    the microphone tab used to be between the "SPDIF/O" and "Digital I/O".
    I DO USE THE LATEST DRIVERS, and i have tried several times to completly swipe all drivers and reinstall them but no luck, same **bleep**. i also tested it before i updated the drivers from 07, to 08.
    please help im lost, i really miss to be able to prank people with this stuff.

    My Friend ?neither equalizer, eax effects, crystalizer,nothing on concole launcher options works on digital output(SPDIF)
    these options just works on analogue sound mode

  • Missing creative console launcher feature

    )I've had an Xtreme music card for some time. Back with WinXP the sound driver had a task bar icon which could be used to quickly get a list sound card related programs, change volume, driver mode and so on. This feature does not exist anymore, not on Win7 at leased. I think I wrote a mail to the support team to ask about this feature, as it was way better than having to start the Creative Console Launcher every time.
    Am I missing something, or is this feature really gone? I've been thinking of installing the XP drivers again and just use that instead of the new ones.
    (by the way I just leared about the daniel k incident, my god Creative, what were you thinking? I don't think I should be expecting too much from the software department)

    -The Daniel K support pack 2.0?has all the missing features your looking for. I had the same problem moving to W7 having a Xtrememusic also. Why Creative has to make everything a PITA is beyond me.
    http://forums.creative.com/t5/Sound-...09/td-p/527485

  • Creative Console Launcher fails to inst

    Hi guys,
    I have just fresh installed Windows XP and this Creative card is giving me a pain in the bottom.
    I have a Creative SoundBlaster X-Fi Extreme Audio Sound Car, and have been and downloaded the Creative Sound Blaster X-Fi Xtreme Audio Pack .04.0079 from here (XFXA_PCDRV_LB__04_0079.exe to be precise) however after installing, all that is installed in the sound card driver, and no console launcher. I have lost the CD that came with the card which had installed the console launcher but whatever I do nothing seems to works. I have tried uninstalling and reinstalling a few times to no avail. I have even disabled my anti-virus when installing so that doesn't effect the install however Creative Console Launcher is not being installed.
    My current Creative folder in program files in looking as follows:
    C:\Program Files\Creative\
    :- AudioCS
    :- Shared Files
    :- ShareDLL
    Here is a directory tree of a backup i have of my program files folder prior to me fresh installing Windows XP,
    C:\Program Files\Creative\
    :- Audio Device Selection Unicode
    :- MediaSource5
    :- ProdCat
    :- Product Registration
    :- Shared Files
    :- ShareDLL
    :- Software Update
    :- Sound Blaster X-Fi
    Any help on how I can get the installer to get Creative Console Launcher installed would be very much appreciated. Thanks

    bump

  • Creative Console Launcher EQualizer affects nothing

    ? Hey people!
    I recently purchased Creative Sound Blaster X-Fi Xtreme Gamer sound card and Onkyo receiver. For first, sound was analogue connected (you know, like not digital) from my computer to the receiver with cable which had x 3.5mm plug and 2 x rca plugs. Afterwards I decided to make it digital, so I bought an optical cable. Everything works ok, but now the Creative Console Launcher application's equalizer (EQ) won't affect any sound at all in my computer. It doesn't change anything. For example, winamp's eq still works fine, but I need an eq that affects the whole computer's sounds: games, movies, music and all that stuff.
    So I don't know what to do here. Already reinstalled the console and the drivers.
    Any help would be appreciated.
    (sry 'bout bad english)
    (Console Launcher Version is currently 2.60.35 and i have Windows 7 Ultimate 64 bit installed on my PC)

    My Friend ?neither equalizer, eax effects, crystalizer,nothing on concole launcher options works on digital output(SPDIF)
    these options just works on analogue sound mode

  • Creative Console Launcher causing stat

    System: 64bit Vista Ultimate, 4gig ram, nVidia 3500, Soundblaster X-FI Fatalty Extreme Gamer Okay, after 4 hours of problems with my initial install posted elswhere, and having a functional restore point once again... I decided to install JUST the Web drivers for my Fatalty andy bypass the CD altogether. I installed the web drivers dated Oct 9th, SBXF_PCDVT_LB_2_5_0002.exe and I got sound working. Great, no hiss, no static, nothing...just good sound. This installed the Creative Audio Console...which although lacked any fancy GUI, (it was a tabbed system window) allowed me to customize the various settings. (only thing missing as I could tell was the Equalizer found in the GUI Launcher) I then installed the Creative Console Launcher CSL_PCAPP_LB_2_40_09.exe (the one with the fancy GUI that makes it look like a mixing board, hi-tech stereo, etc). Once installed and restarted the system, the unbearable constant HISS I've read about came pouring through the speakers right before login...and continued nonstop. I have since rolled back to my system restore before the Console launcher install and all is fine. I'm sharing my observations, in hope that it might help others out with their hiss/static problems. G.

    I do not have the Console Launcher installed and I have static. Glad to see that you found a fix to your issue though. Not to mention I run an Intel board and the X-Fi sits on its own IRQ. I have come down to a decision that it is either the driver, faulty hardware, or a memory addressing issue.

  • Creative Console Launcher - what's the difference?

    What additional features does Creative Console Launcher have compared to the creative audio control panel that is installed with the driver automatically? It seems that the panel has all the main settings available. Why would anyone want to use the "console launcher" (funny name for such an app) instead?
    The OS is Win XP Pro SP3 x86 and the card is PCI Express X-Fi Titanium Fatalty Pro Series.

    with the audio control panel you can't control the eq at all and you cant control the sample rate in audio creation mode but you can control the sample rate for game mode which is not possible with console launcher.

  • Creative Console Launcher vs X-Fi Control Panel

    What can the Creative Console Launcher do for me in terms of functionality that the X-Fi Control Panel, which was installed with my Titanium HD drivers, can not?

    Bump.

Maybe you are looking for