Creative Decoder DDTS-100 problem with my speakers

Hi, I just bought the DDTS, I have Klipsch THX 5.1 speakers and when I hook them up most of the sound is coming from the center channel. The other channels (front/rear) output sound but at a SUPER low level. Any ideas? Is it the Klipsch speakers?
Thanks
J

DudeRighteous,
Have you tried adjusting the levels for the center down and the other speakers up? On the main volume knob press the select button and it will select a specific speaker set to adjust the volume for. Try changing these settings and see if that helps.
Jeremy

Similar Messages

Creative Decoder DDTS 100,

Hello,
I.m using a creative decoder DDTS 100. When i switch on the decoder i set the volume, in which mode it should be, the volume of center and rear speakers. My problem over here when i switch off and switch on the decoder it comes to the default setting. What i want is my settings needed to be saved each time time i switch off and should come up with the same setting when i power on. Please provide me with a solution for this.
Thank you.

hi,
i found your question doin researching on what a creative ddts-100 is on google as i am clearing out my uncles house who died and he had one. would you be interested in buying this one if you have not already got one?
i dont know much about them and not sure if all componenets are there,the box it was in had a piture on the front of the actual decoder and remote, i have both those and a power lead, box and instructions, it mentions here and there in the intructions about a switch box, which i do no have but can look again for it.
if you are intertested i can list the item on ebay with a price that we can arrange for you to buy and i will post it off to you. where are you?
sorry know this is a long shot but my uncle was a bit of a gadget man there is alot of stuff to clear and i know nothing about any of it!!!
my email address is [email protected], if you are interested please get in touch.
thanks
katherine x

Creative Decoder DDTS-100 parts list ??

'Creative Decoder DDTS-100 parts list mspecifially the value for the capacitor "C06 "? this one is at the front of the unit.
or if any one still has a working DDTS-100, and they don't mind taking it apart to read the value of this cap, that would also work as well.
also, maybe? some one could also help me with the issue i have. regardless of the source, both headphone jacks on the front work as they should, the issue is with the audio outputs on the back, center/sub, rears , and the front right, no sound output, the front left, has sound output but it is very faint only can be heard when all volumes are set to max. could this be releated to the possible missing capacitor, C06 ? or could this be related to something internal, like one of the wire connectors that connect each board to each other ?
ANY help would be awesome, thanks :-)

hi,
i found your question doin researching on what a creative ddts-100 is on google as i am clearing out my uncles house who died and he had one. would you be interested in buying this one if you have not already got one?
i dont know much about them and not sure if all componenets are there,the box it was in had a piture on the front of the actual decoder and remote, i have both those and a power lead, box and instructions, it mentions here and there in the intructions about a switch box, which i do no have but can look again for it.
if you are intertested i can list the item on ebay with a price that we can arrange for you to buy and i will post it off to you. where are you?
sorry know this is a long shot but my uncle was a bit of a gadget man there is alot of stuff to clear and i know nothing about any of it!!!
my email address is [email protected], if you are interested please get in touch.
thanks
katherine x

Difference between the Creative Decoder DDTS-100 & Creative Home Theater Connect DTS-

I've had the Klipsch ProMedia Ultra 5. System for years now for my PC with a Sound Blaster card, and I just got a MacBook.
http://www.klipsch.com/products/details/promedia-ultra-5-.aspx
I've asked on the Klipsch message board about a digital decoder. I was recommended the Creative Decoder DDTS-00
http://us.creative.com/products/product.asp?category=4&subcategory=36&product=9468
but I also found the Creative Home Theater Connect DTS-60 for less money, any idea what the difference between the two would be?
http://us.creative.com/products/product.asp?category=&subcategory=6&product=49

No, for the reason mentionned in the stickies. But since you seems not knowing much on digital sound let me explain.
Digital means it's coded with 0 and , and therefor only cable is sufficient. You might know there is many sound formats for home cinema, like Dolby Digital and DTS. And a digital decoder need to be input a compatible sound stream to be able to decode it. Which means the soundcard MUST be able to convert it's output sound in one receiver compatible format.
Creative cards cannot do this kind of thing.
Another thing: current home theater sound format are limited to 6. (DD-EX and DTS-ES). So you would not be able to achieve more than 6..
THX isn't a sound format, only a certification. The THX calibrator is a must have component to correctly calibrate your speakers to enhance you sound experience.
If you need to have TRUE surround up to 7. channels you don't need to use digital connection because it's simply useless.

WTB: Creative Decoder DDTS-100

I'm looking for a Creative Decoder DDTS-00. I really need one and can't seem to find one. Please help me. Message me if you know where I can get one from.

hi, i have one for sale if you have not found one? please email me on [email protected] if you are interested. thanks katherine x

Creative decoder DDTS - 100 replacements? or new model?

Well I wanted to buy ddts-100 but i guess i was too late and it got discontinued . I was about to get it on E bay but it went for too much. Can you guys recomend something as good or better to get then ddts-100 decoder? is its replacement coming soon? I have creative inspire T7900 speakers just in case thanx.

hi,
i found your question doin researching on what a creative ddts-100 is on google as i am clearing out my uncles house who died and he had one. would you be interested in buying this one if you have not already got one?
i dont know much about them and not sure if all componenets are there,the box it was in had a piture on the front of the actual decoder and remote, i have both those and a power lead, box and instructions, it mentions here and there in the intructions about a switch box, which i do no have but can look again for it.
if you are intertested i can list the item on ebay with a price that we can arrange for you to buy and i will post it off to you. where are you?
sorry know this is a long shot but my uncle was a bit of a gadget man there is alot of stuff to clear and i know nothing about any of it!!!
my email address is [email protected], if you are interested please get in touch.
thanks
katherine x

Creative Decoder DDTS-100 with Creative Inspire 5200

Hi Guys,
Basically I wana hook up my PC ,XBOX and TV onto the Creative Inspire 5200.
I found out a couple of options , one of them is Creative DDTS-00.
Can anybody tell me if they are using this device , how good is it compared to a decoder amp by YAMAHA or SONY.
Which is a preferable solution ?
Thanx in advance.
Visu.

DudeRighteous,
Have you tried adjusting the levels for the center down and the other speakers up? On the main volume knob press the select button and it will select a specific speaker set to adjust the volume for. Try changing these settings and see if that helps.
Jeremy

Can I use Logitech X-530 5.1 speakerset with Creative Decoder DDTS-100

. Can someone confirm there would be no conflict. And can I direct my PC 5.1 soundcard sound through this system then. I would like to buy this unit and run TV and DVD player through this as well. But I would rather not by different or new set of speakers.

DudeRighteous,
Have you tried adjusting the levels for the center down and the other speakers up? On the main volume knob press the select button and it will select a specific speaker set to adjust the volume for. Try changing these settings and see if that helps.
Jeremy

DDTS-100 problem with DTS

I recently just got this decoder, and i connect it to my Akira DVD player via Coaxial cable. And i'm having problem in DTS mode, the lights just never lights up. but i had no problem in DD or DD ex. I did alot setting on my dvd players, such as the output mode. like SPDIF/RAW and SPDIF/PCM but it just doesn't works for DTS. is it something wrong with the hardware on the decoder? approximately how much will it cost to repair? cause this is brought from my friend and the warranty had just ended. or just the setting on my dvd? but most probably i don't think it is. cause i tried all sort of setting it just doesn't works at all. thanks for taking your time to read this thread.

smell something fishy here, first make sure the cheap dvd player (akira) support DTS out, second don't tell me you used pirated dvd movies, third not every movie support DTS.
If u had already made sure that your dvd player support dvd player and used original dvd movie with dts, then it's time to contact creative.

What speakers work with the Creative Labs DDTS-100 Digital Decoder-Upto 7.1

what speakers do the Creative Labs DDTS-100 Digital Decoder-Upto 7.1 work with thanks

Unless the Digital 5500 speaker set has analog inputs it can't be used with the DDTS-100. You must connect the DDTS-100 to a speaker system through the analog outputs either from the main unit or the switchbox. I have not heard of any cables to convert analog audio into digital form so digital speakers can understand and play it.
The best speaker system? I have absolutely no idea dude. You must be the judge of that, if it is you who are going to listen to it. I like my S750 system but that is me. You have to read loads of info and reviews and preferably listen to them in a store if you can.

Connecting to my T6060 5.1 speakers with a DVD player thru Decoder DDTS-100

Hi, I have a DVD player which has 2.1 audio output (left and right), a coaxial and an optical audio output. Can you tell me how to connect the creative T6060 (5.1) speakers with the DVD player. Can I connect the speaker with the DVD player with the decoder DDTS-100 to get 5.1 effect. Will the speakers would be working. Thanks,Jwell

Your speakers should have a cable with 3 plugs on the end (orange, green and black). That plugs into the matching sockets on the DDTS-100, and you set the switch to 5.1. Then you need a lead to connect the dvd and its up to you if its coaxial or optical. For coaxial you can use pretty much any phono to phono lead, which you may already have. Ive got a feeling the DDTS-100 comes with one of each anyway. Thats all there is to it.

Replace the inspire 5.1 digital 5500 with the creative labs ddts-100 decoder upto 7.1

i bought the inspire 5.1 digital 5500 i was wondering if you can change the decoder with the creative labs ddts-100 digital decoder upto 7.1 they have it on ebuyer thanks...

joseru,
Duplicate thread.
Cat

Looking For Creative Decoder DDTS-

Bro,
I?m Juniar from Indonesia ( Jakarta ) I?d like to buy Creative Decoder DDTS-00 can you assist me who can I contact with to buy this product because I've been looking this product in my city but this product not available yet in Jakarta.
Looking forward for your assistance.
Many Thanks,
JuniarMessage Edited by Juniar on 08-0-200708:45 PM

hi, i have one for sale if you have not found one? please email me on [email protected] if you are interested. thanks katherine x

Problem with rear speakers!

I bought new Sound Blaster X-Fi Xtreme Gamer Card and I have problem. My rear speakers (DTT2200) don't work. They're connected well, I have newest audio driver and CMSS-3D is enabled. I tested speakers on Creative Control Console and only rear speakers don't work.5.1 speakers are enabled in control panel of WinXP.Please help,Albert.
Message Edited by Albert_PL on 02-26-2007 12:10 PM

Check its set to 5.1 everywhere, especially in the creative control (not 7.1 or stereo anywhere). Check your connections at both ends (sounds silly, but check theyre firmly in) and at the speakers too. Try hooking the rear connection up to the front output on the X-Fi to rule out a problem with the speakers. Check volumes everywhere, settings everywhere, etc. Things like this are normally just one small setting you have overlooked somewhere.

Problem with internal speakers of MacBook Pro

Hi,
I wanted to know if anyone have experienced a problem with internal speakers of Mac Book Pro. In my MackBook the Internal speaker volume goes down automatically. I checked the System Preferences>Sound>Output , from there I check that it is in the middle ( Balance) However, the problem is still the exists. Just for testing I played an audio file and I moved the bar toward the right speaker it is the same and when I move toward the left speaker the whole sound goes off . Looks like one speaker stops working completely. Then I checked the Utilities > Audio MIDI Setup > Configure Speakers from there I checked both left and right speakers and the channel frequency is fine. Still same issue. I have no idea what is going on , I really need your suggestions to get this fixed.
Thanks in advance.

Try the following:
http://support.apple.com/kb/HT1411 Apple Portables: Resetting the System Management Controller (SMC) and http://support.apple.com/kb/PH11243 OS X Mountain Lion: Reset your computer’s PRAM
Also, consider installing Boom

Creative Decoder DDTS-100 problem with my speakers

Similar Messages

Maybe you are looking for