CREATIVE EXTIGY H

would anyone kindly like to upload their creative extigy driver disc or any others that came with seen as im stuck installing it properly on my pc.
if you do email me on [email protected]

On creative.com, go to support and then downloads. The site will walk you thru it from there. If you still can't get it to work you can go to support and contact customer support. It will give you phone numbers so you can call customer support. I have called them before and they were very friendly and helpful.

Similar Messages

  • Creative extigy soundcard prob

    Hey all.
    My Laptop stopped recognizing my creative extigy soundcard. The soundcard powers up and will work In stand-alone mode, but when I connect the soundcard via usb cable to my laptop, nothin happens. I've tried different usb cables to see if that was the problem and I hooked up different usb devices to the usb port so i know the usb port is working.
    The card worked fine up til a few weeks ago.Does anyone know what else I can try?
    Thanks
    Kimo

    Yep, same problem for me. Since I found this problem yet another time some months ago in this forum, it would be very nice if there were some statement how this could happen and if anything could be done.

  • NAT. INSTR . FM8, ASIOv2, CREATIVE EXTIGY  SETTINGS?

    I have a AUDITION 3.0, CREATIVE EXTIGY SC, ASIOv2 and MS- soundcard. What do I set the settings for each so that I can record the actual direct sound from the FM8, my drum machine, guitar and bass? There is a million setting configurations that I have tryed and nothing seems to work. I need the direct sound from my sound card to go directly into my AUDITION so I can record them in real-time? Please help!! Brian

  • Magic Music Maker and Creative Extigy

    % Hi,...
    I bought an Creative Extigy to do some recording and mixing.
    On guitar Rig the Extigy didn`t work `cause it don`t support Asio.
    Does the Extigy support Magix Music Maker?
    I only ?get "dry"sound out of my?speakers,the soundeffects don`t seem to work and I cannot record my guitar when I line it'sinto the Extigy.
    thanx...
    martin.

    Well, in short: You'll get much better answers on the Magix forums on your questions 1 through 3. You will not find many users here who actuall use those programs... For cinema a variety of formats can be used and it will all depend on what they actually want to feed their projectors. Inquire with the cinemas and possibly facilities who do the film transfer/ DCI conversion. Everything else would be pointless guesswork.
    Mylenium

  • Creative Extigy and Optical In/Out with Dolby Digi

    I have a Creative Extigy sound card and for christmas got the Logitech Z5500 Digital speakers with decoder capable of decoding Dolby digital AND DTS (THX certified). So now I'm working on hooking up my game console (XBOX hooked up to the optical in with digital and DTS options enabled) to my Extigy and my Extigy outputting to my speakers through the optical out. I have disabled Extigy's decoding and have everything pass through to the speaker's decoder. I put DVD's into my computer and they come through pure digital or DTS (I know because the speaker's decoder indicates digital sound). However, whenever I put in an XBOX game (currently Halo 2 because it has digital sound), it does not come through digital. The Dolby digital light is on on my extigy unit, yet the output is not digital, only Pro Logic II. I've messed around with every option and looked through many forums, yet have not found any resolution yet. It's not my speakers, because they do output digital sound from my computer's DVD's. Is there something I am doing wrong here? Thanks in advance.

    Awesome jason, all I had to do was setup my dvdplayer (menu) to doubly digital and turn on the compressed thing. Then as you said on the other post I just openned my audigy cp on the control panel (windows) and setup the device controls - SPDIF input from default to double digital/DTS and voila! It works like magic!!!
    Thanks a lot!

  • Creative Extigy replacement rem

    I need a replacement remote for an Extigy if this is not possible do anyone know whether any of the other Creative remote would work with this box.
    --damole

    Yep, same problem for me. Since I found this problem yet another time some months ago in this forum, it would be very nice if there were some statement how this could happen and if anything could be done.

  • Creative Extigy 10.5.8 problem

    Hello! It has been the same with 10.5.7 update , but was easy resolved .
    Now same problem no sound card in system preference .
    Any solution?
    Thanks

    I had actually called Apple suppport when this problem came up in 10.5.7
    and they said they had entered into some internal bug report
    database. Well it appears they never fixed it, probably simply because
    they have no Extigy to reproduce the problem (and they have always
    the "third party" excuse if a customer complains ...).
    For now it is not a problem, but the chances are pretty slim that the
    10.5.6 kernel extension will still work under Snow Leopard. So this is
    yet another reason (apart from the usual ones) not to buy & install
    Snow Leopard when it comes out.

  • My Extigy won't work properly with Wi

    I have upgraded my PC to WinXP. I have a Creative Extigy with 5. speakers, and on my old PC it all?worked perfectly. With the new computer?the 5. rear?right and left speakers won't work. The others work just fine !?There seems to be no signal coming from the Extigy when I play from Musicmatch Juke box. But if I play something throught MixMeister3 it works just fine. Any ideas what the problem is ? ... thanks ... Roger

    hey..actually i have same problem 2 days ago n yesterday my imessage finaly worked..
    in my case i use another sim card/not original bundling,then i use my original sim card/carrier, n it instanly worked..
    so actually carrier does take the problem..
    im sory my english is terrible bad,im from indonesia..thank you

  • Extigy vs. Audigy 2 n

    Hey All. If I want a?new sound card to my laptop,I own a Creative Extigy.Will I get a better sound if I buy the new Audigy 2 nx?Or should I just stay with my Extigy?I only listen to music on my laptop. Regards from lunte.

    lunte wrote:
    Hey All. If I want a new sound card to my laptop,I own a Creative Extigy.Will I get a better sound if I buy the new Audigy 2 nx?Or should I just stay with my Extigy?I only listen to music on my laptop.Regards from lunte.
    If you're looking cards under 00$, here are some models:
    Max 24-bit/48kHz output (stereo) resolution:
    M-Audio Fast Track USB Computer Recording Interface (~99$) - Fast Track USB User's Manual.
    Max 24-bit/96 kHz output (stereo) resolution:
    Edirol <span class="highlight">UA-EX (~80$) - <span class="highlight">UA-EX User's Manual.
    SB Li've! 24-bit External (~50$) - Li've! 24-bit External User's Guide.
    Audiotrak OPTOPlay (~50$) - OPTOPlay Manual.
    M-Audio Transit (~80$) - Transit User's Manual
    juapa

  • Extigy for car au

    hi all,
    has anybody tried using the creative extigy for your car stereo ? is it possible ?

    morfasie wrote:
    Thanks,
    are you saying that it isn't of much worth? Because my dad has an Ipod car audi thing and it works fine.
    Is this the system that links directly into the stereo? This is effecti'vely a line-in connection, which is the best quality you're going to achieve.
    Where can I see the creative version of this? Are all of them cassette based?
    The FM adapter is here on the USA store. Creative also sell a cassette adapter here on the USA store, but you can buy these in other brands. Line-in is more complicated and predicated by your car stereo.

  • Extigy prob

    Hello, I own the creative extigy for around a year now. It always worked fine untill yesterday. I was playing GT legends and suddenly i had no sound. I thought: ohh, ill just re-install the drivers. When i inserted the CD and clicked install it said there was no soundblaster connected to my computer. So, i tried downloading new driver from the support site, but it didn't help. So i checked the manual but didnt find a solution. Also, when I plug it in after 30 minutes without power, it doesn't say new hardware found: Creative Extigy but i says : New hardware found: Multimedia audicontroller. But again, when i try to install the software it says there is no soundblaster connected. Anyone got a solution for this problem?
    thanks in advance
    -Waluu

    bump

  • 3rd party ASIO drivers for Creative external (USB) soundca

    If you're using your USB soundcard for music making (recording) and you're suffering on
    latency problems, you might want to check this out.
    USB Audio (http://www.usb-audio.com/) is offering low latency USB ASIO driver, which is
    statet to be compatible with Creative's external (USB) soundcard models:
    - Audigy 2 NX (48 kHz only / not on Mac OS X yet),
    - Extigy (48kHz only),
    - MP3+ (48kHz only),
    - SoundBlaster Li've 24bit external
    <i>Limitations using Creative Extigy with this driver: 48 kHz, stereo output, line or
    mic input (digital input only while output is muted), no MIDI, no remote control
    functionality. We worked hard to change this, still it seems to be impossible at the
    moment. </i>
    USB ASIO is commercial product, but there is a demo version available, so you can test
    if it would make your life feel easier (http://usb-audio.com/download.html).
    .jtp

    OK, I can now CONFIRM that this problem IS with the latest (but rather old) Kensington V3.0 driver. From Kensington Tech Support:
    Subject:
    (Info) Expert Mouse & Leopard - scroll ring no longer zooms Mac screen in and out
    Discussion Thread
    Response (Asif Ali) 11/03/2007 01:05 PM
    Thank you for contacting Kensington Technical Support.
    I sincerely apologize for the inconvenience caused to you.
    I understand your concern. I regret to inform you that Mouseworks 3.0 on 10.5 breaks the native Ctrl + Scroll to Zoom functionality, but for now the solution is to Uninstall Mouseworks if this functionality is preferred. As we test the Expert Mouse & MouseWorks on the release version of Leopard and found that all functionality/programmability works with MouseWorks installed except for scroll wheel zoom.
    However as we have forwarded the issue to our software development team, we are expecting an updated release very soon.
    I appreciate your understanding and patience.
    Regards,
    Asif Ali
    Kensington Technical Support

  • Audigy 2 Value EAX Cr

    I know there are a couple of threads on this floating around but I couldn't find them. I just want to know if there are any new solutions to this problem (whenever I use a game with EAX the computer crashes and speakers emit screeching sound) This is really annoying me because in World of Warcraft there is no option to turn off EAX, so I don't know how to play it without it crashing on me, other than uninstalling the soundcard drivers.

    Wow,st time I looked at this forum. I'm having the same problem.Was doing it in both the Nascar season 2002,2003 sim's.When I was in the car and change view get the same loud screeching sound and then the PC would crash.2003 uses the EAX,2002 doesn't,so I tried 2002 same thing happened.had my Sound card ACC hardware lowered to basics,tried everything.Plus Creative does not have any newer update drivers for this Card,and may never have,there latest driver is real old,so what does that tell you?Now I can't play the 2 Nascar sims,had to remove them. I'm not going out to buy another Sound card,already got to much mony in this darn PC.Chip set is up to date.Drivers are. I had Creatives Extigy External card,did not have any problem,except low FPS because it would use the CPU to do most of the work and rob FPS,that why I went to a Internal Sound card,Better FPS in all games. If I new I was Going to have this Problem I would have gotten a diff. card,diff. CO.At the time I thought it was SP2,I turned a lot off in SP2,Firewall,so on.Did not help,by the time I did all these test ,Fry's would not take Card back.Oh well that's the way it goes,until I upgrade on a new PC. Ron
    When you go to support all they want you to do is update your dri'ves,what UPDATE for this card? Old update.Message Edited by rcca on 05-23-2005 02:34 AM

  • Can anybody supply 'sound' advice.....

    <font face="Comic Sans MS" color="#0000ff">I have been waiting for an X-fi external solution since the advent of the X-fi series... But can any of you Creative Contributors help me with the following questions?!?:<font face="Comic Sans MS" color="#0000ff">?<font face="Comic Sans MS" color="#0000ff">. I have a high-end laptop with a Creative Extigy attached/connected into Klipsch promedia 5.'s and a large wma collection encoded at 92kb
    ps.
    For BEST musical/audio results will the Xmod go between the extigy and the speakers or will I effecti'vely have to 'dump' the extigy as it will not connect the two together and/or render the extigy redundant?<font face="Comic Sans MS" color="#0000ff">?<font face="Comic Sans MS" color="#0000ff">2. Will I fully appreciate the Xmod when utilising 92kbps encoded wma's? - Have heard differing reports that it works wonders with 28kbps mp3's but not with 92kbps compressed files. Any thoughts on this guys? <font face="Comic Sans MS" color="#0000ff">?<font face="Comic Sans MS" color="#0000ff">(I appreciate that I will prob not utilise cmss as I like my tunes, most of the time, with cmss off!).<font face="Comic Sans MS" color="#0000ff">?<font face="Comic Sans MS" color="#0000ff">Look forward to some good advice (and?maybe some differing opinions......<img height="6" width="6[/img] src="http://forums.creative.com/i/smilies/6x6_smiley-wink.gif"><font face="Comic Sans MS" color="#0000ff">PolzyB

    Do you want to pay someone to write a VI for you or do you want help in learning how to put one together yourself?
    What is the amplitude of the output of the amplifier? Both full scale signal and expected noise in the absence of a signal. What is the frequency range or bandwidth of the amplifier? Is the noise bandwidth significantly different from the signal bandwidth?
    Do you have a DAQ device? If so, which one?
    What is to be done with the data after it is acquired? Display, save to file, control something?
    What interaction with the software will the user have? What inputs does the user need to enter? Is there data to be read from a file (test parameters for different amplifier models for example)? What outputs will be presented to the user? Raw data measurements, Pass/Fail indications, other...?
    Lynn

  • Controlling RealPlayer 10 with Rem

    I have a creative Extigy with the remote RM-000, and i want to be able to controle real player 0 with it. i have tried this before you have to write a .key file that converts the key pressed into an asci code. but i cant seam to get it to work with real player, as the short cut keys are ctrl+p for example. also how does the remote recognise the key file to use, does it have to be named the application name, of the exe file name or what. Any info would help or even better has any one got a working one, for real player, they could send me.
    Regards Olly

    hi,
    i wrote a wiki, but its in german... sorry.
    http://sbrc.pbwiki.com/

Maybe you are looking for

  • GTX 560 Ti Copper Edition In-Game Artifacts

    Helloo! Specs are as follows: AMD Phenom II X6 1090T Black Edition ASUS M4A89GTD PRO/USB3 AM3 AMD 890GX HDMI SATA 6Gb/s USB 3.0 ATX AMD Motherboard Hec Zephyr MX 750 750W G.SKILL Ripjaws Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)

  • Parameters in Excel Output

    I am outputting some financial information into an Excel spreadsheet from BIP. Part of the reoprt is to select the data based on the current fiscal period. When I create the template using the Excel Analyzer these parameters appear in the template, a

  • Query data on an XML table CLOB

    Hi I'd like to query an Oracle table to extract xml attributes on xml CLOB column's please see below table structure and how can i improve performance on this table we've already created Index. Can you please assist on how to improve performance when

  • Closing stock value

    Hi SAP Gurus, how will get the closing stock value for datewise in month. Thanks Shri..

  • Shuffled characters in reader

    after editing a pdf file with pdfedit, the pdf is showed correct in pdf readers like okular, epdfview, evince, freepdf, but NOT in Adobe Reader 9.4.2 ! A lot of characters are missing or changed. ie: text in german:  1) = original, 2) = Adobe Reader