Creative GigaWorks 250 suddenly quit working

I have checked for loose wires but everything appears to be connected OK. Any other trouble shooting suggestions or other ideas?

Contact our Customer Support so that they could assist you further on this.

Similar Messages

  • My iPod touch 5 suddenly quit working and it won't charge.

    My 5th Generation iPod touch suddenly quit working. I try to charge it and nothing happens.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • HT1766 My iPad speaker suddenly quit working, ear phones are ok, anything in setup for a fix

    My speaker suddenly quit working, ear phones are ok, is there a setting for this

    Plug/unplug the headphones from the iPad a few times. Also try rotating the plug in the socket a few times. The headphone jack has an internal switch which turns the speaker off when the headphones are plugged in. The contacts may have gotten dirty within the socket. Working the plug within the socket can sometimes get things working again.

  • HP Deskjet F4140 Suddenly Quit Working

    Hello, I have an HP Deskjet F4140 connected to my iMac that suddenly quit working. The iMac doesn't even detect a a printer connected. I have updated my BIOs, uninstalled and reinstalled the printer drivers, etc. It worked fine last week. The only update I have made since then was an automatic update of the EEI Firmware. Any help?

    The Apple updates messed with my HP C4280. I had to uninstall-delete then hunt down all HP files (preferences etc) using Spotlight and delete. Then restart and download and install the drivers again. After all of this it worked properly. Good luck.

  • Dictation suddenly quit working on my iPhone

    dictation suddenly quit working on my iPhone. Help

    I had the same problem, dictation suddenly stoped working on my new IPhone 5.
    I tried the fix from Linda Swenberg and it worked.
    Turn Off SERI in General settings
    Power down the phone ( press and hold the on/off buttton)
    Turn it back on
    Turn SERI back on
    Wait 3 minutes
    It then worked
    Thanks Linda

  • My gmail desktop suddenly quit working on my iMac. Why? I am connected to the internet

    My gmail account suddenly quit working on my imac HELP! I can access the internet using safari just fine.

    You might want to post this question in the iPad forum as it is not related to iCloud.

  • Image Processor suddenly quit working, CS3, OS X Yosemite.

    I use Image Processor from Bridge all the time to run actions on folders of photos. Suddenly, it just quit working. Photoshop opens, but the dialogue box never appears so nothing happens. Help!

    Have you looked at System Preferences/Trackpad to make sure it is set up?

  • My mousepad suddenly quit working

    My mouse pad quit working suddenly. It appears to be mechanically, as in the pad doesn;t seem to be going down to select. Any way to repair or free it up?

    It could be the battery causing this.
    Take your Mac to an Apple Store or Apple certified repair shop.

  • Time Capsule--Wireless suddenly quit working

    My Time Capsule had always worked perfectly, but suddenly my wireless access from any device has quit working. My DSL is working fine, and the router and backup portions of the TC seem to be working. I tried a hard reset, updating to the latest version of Airport Utility and Firmware, and it still doesn't work. My laptop sees the network, but when I type in the password and try to connect, I get a connection time out.
    Is there anything else to try, or do I assume it's broken?

    Do a factory reset.. if the TC still will not pass IP addresses it is indeed faulty.. I get the idea it has swapped modes for some unknown reason. Anyway give it a try.. no luck and Apple will replace it.

  • In FCP7 my share option suddenly quit working, and I can't submit in compressor either.  Any suggestions for a solution?

    I have had FCP 7 installed on my Mac Pro since May 2011, It has worked flawlessly up until a couple weeks ago.  The "share" option has quit working on me.  Also, I am unable submit any jobs in compressor, the button is greyed out.  This has come entirely out of the blue and I'm stumped as to the best course of action.  Any suggestions?
    Thank you for your time.
    Justin

    Thanks for the reply,  I actually used the digitalrebellion.com FCS Remover and reinstalled compressor and Qmaster and everything seems to be working properly again.
    Thanks again for your reply

  • Messages and facetime all of a sudden quit working

    (icloud) imessage and facetime all of a sudden stopped working and advice to how to get it working again?

    I had the same problem too. For some reason the phone settings turned them off. For iMessage you have to go to Settings>iMessage and turn it back on. Same for FaceTime, go to Settings>Facetime and turn it back on. Don't know why some peoples stayed on and others, like ours, turned off. Hope this helps

  • CS3 Master Coll. Photoshop has suddenly quit working (running XP)

    When I click OPEN to open a file,. instead of taking me to my folders, it closes Photoshop down. Open Recent works but not plain Open. I uninstalled it using the Add/Remove and reinstalled to no avail. It also thinks I don't have an internet connection when clearly I do. The other components seem to be working okay- just not the one I need. I have a big wedding to edit and finish by the end of the week- help!

    My problem with photoshop and CS3 is that they are  triplicating the
    photographs each time I launch and Adobe seems to continue to  give me the excuse
    they are working on the problem of catalogues they are aware 
    of.....................  I am into my 4 th month with this problem and  still have nothing
    resolved.
    Janisue Rigel 
    In a message dated 8/8/2010 4:14:37 P.M. Central Daylight Time, 
    [email protected] writes:
    ok  so I have had CS3 design suite for a few years now and I have never
    had any  problems, the past few months I keep getting errors saying the
    liscensing on  this product has quit working and I need to uninstall and
    reinstall to fix  it.  I looked this problem up on the internet and found an
    article on  adobe's site telling me to fix the flexnet issues and whatnot.  I did
    everything it told me to do and photoshop still wont launch, continues to
    give  me this error!  I uninstall the program and reinstall and it works
    fine  for about 3-4 days then starts this all over again...I am at the end of
    my  rope here, cant get any work done cause photoshop is always down.  I am 
    running windows vista, would this be part of the problem maybe?  any help 
    would greatly be appreciated, Im not sure at this point if I should get a new
    version of windows or a new computer or what...something is not right with
    it  and I cant keep doing portrait sessions without being able to deliver
    proofs  in a timely  manner!

  • ADE suddenly quit working for all users on my Vista computer.  What should I do?

    Please help.
    Adobe Digital Editions quit working for all users on my Wndows Vista computer after I tried several times to install a book that wouldn't install.  The book is one of three I recently purchased even though the other two installed with no problem.  Other books were already installed. 
    I uninstalled and re-installed ADE with the latest version and tried again after clearing out the "My Digital Editions" folders by moving the contents elsewhere.  The same problem occurs with all users on my computer.  
    The program runs showing no books or bookshelves despite contents in the "My Digital Editions" folder.  If I try to "Add to Library,"  the program shuts down and shows nothing- not even an error message when re-run.  Even though I'm only able to create a bookshelf, no bookshelf appers when the program is re-run.
    I even tried de-authorizing and re-authorizing my computer.
    What should I do? 

    HI
    Whilst your Apple ID (presumably the @mac.com) may have been the original and been linked to @me.com at the MobileMe period and then to iCloud (@icloud.com) you need to keep to the same Apple ID through out (the iMessages server seems to treat them as different IDs to some extent).
    In the Finder use the Go Menu > Go to Folder and enter ~/Library/Preferences
    Find and Drag to the Trash com.apple.ids.service.com.apple.madrid.plist
    On the iPhone remove those emails that are not the Apple ID in use.
    On Restarting the Mac version you will have to re-enter the Apple ID.
    If you then restart again you should get the pop ups to say what the iPhone is using (linking the iPhone number to the Apple ID)
    Once you enable Text Forwarding on the iPhone then the Mac Version should generate and show you the Code to then enter in the iPhone's dialogue box to pair the devices.
    If each Contact is turning red as you try to Send and reporting that the Contact is "Not Registered with iMessages" then you have a different issue.
    This is caused by a partial login to the iMessages server and it seems it is one of those that only contacting Apple Support and saying you have an Account issue with the iMessages server from your Mac can it get sorted. (make sure you say it is an Account issue)
    Of course it is the iPhone that is actually sending the SMS messages so it does need to have Carrier service at this point.
    8:56 pm      Monday; October 27, 2014
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Digital audio SPDIF suddenly quit working

    I was watching a video yesterday on our home theater connected to my Macbook. The audio was connected using a SPDIF to toslink cable and everything was working fine until suddenly the audio stopped. Analog out still works and the internal speakers still work when the cable is unplugged.
    When optical is plugged back in, internal speakers stop but nothing is sent to the sound receiver over optical. When I check the Audio MIDI settings it detects that an optical device is connected. Any suggestions?
    Dave

    The Jack could be askew, but...
    Long shot, but...
    Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

  • My bluetooth magic mouse and trackpad suddenly quit working.  This has been going on for a month or more.  Eventually continual

    I have a Bluetooth Mac keyboard, trackpad and magic mouse.  They fail regularly and only a series of resets eventually cures the problem. I have switched to a USB mouse, but that eventually fails too.  2011 mini, all current software.  Mouse still moves cursor, but no left click.  Trackpad loses click ability.  Repeated shutdowns.  Something is very wrong.

    If even the USB mouse is failing, that's interesting. Make sure you remove the batts from any nearby BT mice, and reboot the system.  USB mouse should work fine, if it's still not clicking, something needs to be probably changed in the system preferences.
    Try these:
    Reset your computer's PRAM
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Mac OS X: Starting up in Safe Mode
    http://support.apple.com/kb/HT1455

Maybe you are looking for