Creative I Trigue 3330 Adapter problem!!!

hey guys am a kind of novie in the whole sound system game, i went to turn on my speakers this morning i smelt a burning sensation from the adapter, any help guys? would be greatly appreciated, thanks in advance
Asad
Message Edited by asadk on 04-02-2009 05:07 PM

I've seen the support department has replied to other problems from users on this forum with solutions for their problems. Why not here?
because it's user to user only? than what choices do we have?
Best Buy won't take back the faulty speakers because it's past 30 days. Most retailers may accept up to 3 months, but this one doens't apparently.
any other suggestions?
maybe the administrators (who do monitor these forums obviously) could pass this on to the Support Department since this is not an isolated case.

Similar Messages

Which Creative Speakers to buy Next GigaWorks T20-T40, or I-Trigue 3330, 4000 or L3800

Hi just wondering if anyone could make a recommendation on getting some new 2.1 or 2.0 speakers.. After my old Creative 4.1 have died I have been looking at the following models and my main use will be for Music and movies in my room. So they don?t have to be that loud..
Gigaworks T20 & T40
I-Trigue L3800
I-Trigue 3330 or 4000
I heard the T20 and they sound good for a system with no Bass but seam a bit blocky. Next the I-Trigue 3330 also sounded good as long as you don?t crank the volume up too much. As for the I-Trigue L3800 I have read they are a 3 way speakers system and was wondering what people thought of them. Would I get a better sound out of them.
Thanks

Creative I-Trigue 2.1 (3300) Left channel not working

Just recently purchased the Creative I-Trigue 2.1 (3300) for my boyfriend's gaming station. I have his audio settings set to 2.0 CH speakers, and have the thing plugged into the appropriate hole. The subwoofer works, the right speaker works, but there is no sound comming out of the left. I discovered that the satellite speakers themselves are operational by individually plugging them into the right speaker output line on the back of the subwoofer, but neither of the speakers work when I plug them into the left audio output line in the back of the subwoofer. I have come to the conclusion that the subwoofer is possibly defective.
Just to rule out any other possible errors on my part, I've tried it on three different computers with the same result. The equalizer settings on all computers are not skewed.
Please help. Depending on the results I find here, I'll either be going back to the store to have them exchanged for the same product.... or get a refund :womanmad:
Yvonne

I have the same exact problem, but I can't return mine because I moved 3 hours away from the place I got it What did u end up doing to fix it, and is it something that I can fix? I really do not want to spend time sending them back to the company for the new set, that takes forever, not to mention the shipping cost >_> I had to do the same thing for my Eclipse 2 keyboard cuz of bad keys... please help me

I-Trigue Mysterious Subwoofer Problem?

Hi, I have a Creative I-Trigue and my subwoofer has become very crackly when I put the bass up. It can handle a very small amount, but gets progressively more crackly as I turn it up. I have taken off the fabric cover and looked at the rubber bass thing and it seems like this is where the problem lies, as the crackling reduces if I put my finger on it (although so does the bass so its not a solution), and it seems perfectly stuck on and well-sealed, and I can't see any tears or cuts on it. I have also taken out all the screws and tried to open up the main body to look further inside, but it seems pretty much impossible to take off as it is so tightly fitted, and all I can do is pull out the speaker a little bit from its hole - again, I can't see any problems with this component. Is anybody familiar with this model, or just the generics of subwoofers, and could maybe point me to the solution? Money is tight at the moment and I can't afford to have it fixed, so I was hoping there'd be a DIY way. Any help or suggestions would be greatly appreciated, whether they be for a way to open the whole thing up or to fix the problem. I'm not well-informed of how it all works, but from my perspectivei it just seems like it is vibrating too hard, possibly catching on something, though I can't see what? It used to work fine on this same laptop, so I don't think its a soundcard issue. Thanks in advance if you can help me, will do anything I can to return the favour...

Glenhollow,
I think there may be a hardware problem with your speakers. The best bet would be to contact support and arrange a repair/replacement for them. Here is their contact page: http://us.creative.com/support/custsup
Jeremy

Creative i trigue 3220 Volume attachment.

Hi good people, i was using this speaker model(Creative I trigue 3220) for about two years. And then volume controler started to crash when i move the vire. And that started to reapeat more often in result. Now my volume attachment doesn't work at all. And without volume controler my speakers doesn't work too.
P.S I know that I-Trigue 3220 was launched in the market for quite some time, and production of this product and its accessories have been discontinued. So my question is is it possible to make those speakears work without that volume attachemnt with some program? Or maybe someone know where can i buy that volume controler? So pls suggest solutions. Thank you for attention.

Hi Xamer!!!
I am experiencing your same problem and cannot find a solution to replace the volume remote controller.
I notice that no one has answered to you!
Did you get a solution then?

Mini display to hdmi adapter problem

Hi,
When I connected my mini display to hdmi adapter to hdmi, and hdmi cable to my ASUS PA238QR monitor, my early 2011 MBP 13" detects the monitor, but the monitor shows "hdmi no signal".
I tried unplugging everything, including the adapter and hdmi, but to no avail. I tried putting my computer to sleep, and waking it up, still, nothing seemed to be the cause of the problem.
I read through some old discussion on this issue, and nobody seems to have a solid solution besides purchasing another adapter.
I tried booting into win7 and still, the monitor shows "hdmi no signal".
I am 100% sure my monitor and hdmi works becuase when I used other laptops it's fine.
Thus, I'm suspecting it's the mini display to hdmi adapter's problem.
Is there a way I can make sure that my macbook pro is outputting the signal?
Any recommendation or advises are welcomed. Thanks for reading.

If you've an HDMI port on your television, you could always try that.
I've used this adapter from Monoprice successfully - not bad for under $7.
Give your TV a try - if no go, then you'll know that it's an adapter problem.
Good luck,
Clinton

HT4241 HDMI adapter problem

i have an HDMI cable connected to my late 2011 macbook pro using a Rocketfish RF-AP305 mini display port adapter i plugged it all in to my 47 inch LG lcd tv but its not working i have searched all over the web but ihavnt found anything that helps so please help me

If you've an HDMI port on your television, you could always try that.
I've used this adapter from Monoprice successfully - not bad for under $7.
Give your TV a try - if no go, then you'll know that it's an adapter problem.
Good luck,
Clinton

Hdmi adapter problem

I own Phillips 32pfl9604h TV. Recently I bought HDMI adapter. When I set up the iPad with HDMI to TV , TV is recognizing the iPad but the format is constantly switching between 2 different formats. I tried to connect it to a different model of TV and it does work normally. I've tried to change the format but I can't stop the changing of formats.
Is there any solutions for this?
Thank you in advance.
Jure

If you've an HDMI port on your television, you could always try that.
I've used this adapter from Monoprice successfully - not bad for under $7.
Give your TV a try - if no go, then you'll know that it's an adapter problem.
Good luck,
Clinton

Hi, I'm having a macbook pro here and it spoiled after a year of using, i though it was the power adapter problem because when i try to charge my mac battery that is depleted it shows a very dim light and my mac won't start up

Hi, I'm a macbook pro user but recently my macbook just spoiled, i though was my power adapter problem because when i charge my mac battery that is depleted, it shows a very dim light and my mac just won't start up, even i bought a brand new 80 euro power adapter it still give out the same result.

when I switch it on, the little led light it up and u can hear the fun running and after 5 to 10 seconds switched off again / ive got all my recordings in there
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller (SMC)
in really disappointed with apple,
Serge... you are aware that you are responsible for backing up your importanta data correct ?

What is the difference between Creative I-Trigue 2300 and 2200?

Hello,
i found on your webpage the sound speakers I-Trigue 2200, on Amazon and other webpages i found the Creative i-trigue 2300. But i dont find anything about this sound speakers on your page - is this the new model of the i-trigue 2200? The 2300 have a little bit different design.
Thanks a lot.
best regards

Hi,
The 2300 has a much more sleek design than the 2200 and the Bass performance of 2300 is enhanced with it's BasXPort. But nevertheless, both are good 2.0 audio speakers.
You could find more information for the Itrigue 2300 here.
Cheers.

Subwoofer I-trigue 3330 broken

Hi dear friends, i have a 2+ sistem i trigue 3330 very nice but few days ago the sub loudspeaker start to go very bad. I would know were i can buy in Italy the spare?( marked Cambridge audio)plese help me i need to start again with this wounderful system.... Bye Joe My e-mail: [email protected]

Hi,
The speakers system do not require drivers to operate. You might want to make sure that the sound card/onboard audio device is installed properly.
Hope this helps.

Creative I-Trigue 3400 Spares

Hi,
I have owned the speakers Creative I-Trigue 3400 for a few years now, they do the job fine. However recently the Wired remote control with bass level control has broke, I do not really want to replace these speakers as I think they are great, I do not want to buy the whole package again becuse the subwoofer and speakers are still in good condition.
Therefore I was wandering if there is a place where I can buy spare parts for it's Or any other user which has spares for this item. (I am in the UK) I have tried e-bay but with no luck.
Any help would be appreciated.
Thanks
Nas

I have the same question. I compare the 3500 to several other systems and found it to be superior. I did not test against the 3400, which is a different design concept. I tested against the 3300 which I did not like at all.

Creative I-Trigue 3400 or L3500?

I recently bought a Mac Mini which has a built in 2.1 sound card so i'm looking at getting either the Creative I-Trigue 3400 or L3500, at first i was leaning towards the L3500 since they have more power but then it sounds like the 3400 has better sound?
I will be mostly using these speakers to listen to Music, maybe watch some videos now and then and some very little gaming, so what would you all reccomend?
Thanks in advance.

I have the same question. I compare the 3500 to several other systems and found it to be superior. I did not test against the 3400, which is a different design concept. I tested against the 3300 which I did not like at all.

Creative MuVo and Nforce2 USB Problem solved??

http://www.nforcershq.com/forum/viewtopic.php?t=12499
Posted: Mon Apr 07, 2003 12:43 pm Post subject: Creative MuVo and Nforce2 USB Problem solved??
Creative released a official firmware for MuVo, and according to them
Fixes
Improved USB file transfers for computers with NVIDIA® nForceTM1 or 2 motherboards.
Better playback performance when more than 128 music tracks are in the player.
Uninterrupted playback for high bitrate (192 Kbps) WMA files.
Smooth playback for WMA files even at low battery levels.
Improved Previous/Next Track function.
Player may be turned on even when its memory is full
http://www.nomadworld.com/downloads/drivers/welcome.asp?region=2&LangID=1033&OS=10&prod=437&Select=Get+Files&x=47&y=11

Quote
Originally posted by axeluktoo
Hi,
Good explanation of FSB Spread Spectrum here:
http://www.pimprig.com/forums/archive/topic/7581.html
From what I can make out, it\'s basic function is to help prevent your machine from interfering with other electronic devices (such as TVs, Radios etc.)
Hope this helps!
Axel :D
Thanks for the link.
It does say in there that it does tend to mess up the clock. Also why doesn't the VIA boards have this option?
BioHaz

Creative I-Trigue 3000i, 2.1 Speakerset and Ipod Nano

Does anyone know if the Creative I-Trigue 3000i, 2.1 Speakerset,ncl. iPod dockingstation work with the 4th gen ipod Nano?
if not does any of the speaker syestems.
Thanks

Hi Justcook,
You might want to get in touch with the online store. They should be able to assist you with your enquires.

Creative I Trigue 3330 Adapter problem!!!

Similar Messages

Maybe you are looking for