Creative I-Trigue L3450 Speaker System

Hi.
I am interested in the above product but was just wondeirng if anybody could answer some questions for me.
Is it possible to plug a USB MP3 player into the controller of this system and have the music played? The following link seems to suggest that a USB MP3 player can be plugged in:
http://www.boysstuff.co.uk/product.a...id=&src=Search (st picture)
Can Anybody confirm this?
Also, must this system be connected to a PC or can it simple be plugged into the mains and have MP3 players etc run off it's
Any help would be brilliant!
Thanks!

badboyuk,
The USB port on the volume control is what we call a M-PORT. Basically, it does what you mention by it's only compatible with M-PORT compatible player and as far as I know, only the Creative MuVo NX is supported. The speaker doesn't need to be connected to the computer only. You can connect to any audio source that's using a 3.5mm stereo minijack output.
You can also download the user guide for this speaker from the Product Documentation page for more information regarding the speaker system.
Jason

Similar Messages

I-Trigue L3450 Speaker System

i have some question about the M-Port provided on the audio controller port ...
i have a Muvo TX FM MP3 Player, i try to connect it into the M-Port and play it, it seems not functioning at all, no sound.
does it require any driver ?
thx !!!

badboyuk,
The USB port on the volume control is what we call a M-PORT. Basically, it does what you mention by it's only compatible with M-PORT compatible player and as far as I know, only the Creative MuVo NX is supported. The speaker doesn't need to be connected to the computer only. You can connect to any audio source that's using a 3.5mm stereo minijack output.
You can also download the user guide for this speaker from the Product Documentation page for more information regarding the speaker system.
Jason

I Trigue 5600 Speaker System RMA

Hi, would be grateful for some help please. A couple of days ago my speaker system stopped working. It is within warranty and I contacted the support centre. I was sent a troubleshooting guide which I followed through and still the speaker system isn't working.What I did discover however, is that the power supply unit that plugs directly into the subwoofer is actually working as I could hear it buzzing when I put it next to my ear. Also, it does get a bit warm when it's on.Anyway, I tried to explain that to customer support, and they have sent me an RMA no for the power supply !Phoned up this morning and I'm not getting anywhere. The problem could be either with the subwoofer, or the volume control unit, or failing that the power supply unit. The volume control produces a blue light normally when its turned on, but that isn't also happening anymore. I am from the UK btw and if anyone could help, I would be very grateful. I have also sent numerous emails trying to explain the above. Thanks

Well i think i have the same problem as you with these exact speakers (i-trigue 5600). I found out it was the volume control not that long ago, so im guessing this is the same problem as you! Try lifting the black turner thing on the volume control away from it and turn it and see if the blue light comes on, mine came on for a second, but the volume control is definitely faulty. If you know of any way to get a volume control this would also help me :-) Peace outChris

Conecting Creative Jukebox to a Speaker System

Hi! What I want to achieve is to listen to music from my Jukebox mp3 player on a 5.1 or 7.1 speaker system and listen to it through all the speakers. Is this possible to do without a computer? Can the speaker system upmix the stereo line-in input to a 5.1 or 7.1 sound through the speakers?
I'd appreciate any ideas or experiences if anyone has tried to do this and has either succeeded or failed.
Thanks for your help!!!!

No, you won't be able to listen to all the speakers with a combination like that one. The outputs on our Jukeboxes are only stereo. If you have the Jukebox 3, it has 2 outputs, which would give you 4 speaker sound, but that's the most you'll get.
I would advise using stereo speakers, or if you really want more sound, to get a DDTS-100 decoder. The decoder can upmix sound to more speakers, so even if the source is only stereo (2 channel).
Cat

Creative I-Trigue L3500 sound system not working!

I own this product and it has been working proparly over the past few months. I unplugged my computer to clean the dust out and i can't find the right circuit plugin. It has worked before the day perfectly I just forgot where to put it. I have tried windows troubleshoot and it still hasn't helped. Also, I have tryed plugging the cord into other plugins and still it has not worked.
Any ideas about how i could get this to work again or what i did wrong.

also this is what message pops up when I start my computer and and this message appears on the desktop screen:
CtSpkHlp: Cthelper.exe-Application error
The instruction at "0x77747570". The memory could not be "read"
Click on OK to terminate the program
Click on Cancel to debug the program

I trigue l3450 volume controller

I am looking for a volume controller (ANY volume controller) that works on our "i trigue l3450 speaker set". ANYONE?! Thanks, really appreciate any info!! Kurt (Netherlands).

Hi,
I am afraid the remote is not sold separately. You might want to google and keep an eye out on auction sites, someone could be selling their speakers system. I will have to leave this thread for others to chime in.

Which 2.1 speaker system to choose?

hi!
i'd like to invest Creative's 2.1 speaker system, but it's a bit hard to choose proper one as there're plenty of them available.
my criterions: quality and power to listen house and trance music.
regards

If you search for quality and power then i recommend Cambridge SoundWorks MegaWorks THX 2.1 250D , you won`t be disappointed.
If you have good soundcard with SP/DIF coaxial output just hook it up with some Profigold or Monster digital coaxial cable and enyoj in the crystal clear sound.

5.1 Speaker System Problems

I recently bought a Creative T5400 5.1 speaker system.
However when I've tried to connect it to my 12" Powerbook I can only get sound from the front right and left, and subwoofer.
Doing some research I've found that I probably need to buy an external USB sound card. However I am trying to avoid this extra cost (speaker system cost me ony £30, and external sound cards seem to be around the £100 mark), and so am looking for a cheaper alternative.
I read somewhere that you can get 2.1 sound to come from all 6 speakers which would be fine, but the site I got this from was unclear on how exactly.
If anyone has any idea how to do this (do I need to download a decoder?) or knows of anywhere to buy supercheap external 5.1 sound cards, it would be greatly appreciated.
Thanks
Chris

Hi,
1. Make sure that the front left speaker is connected properly.
2. Please write to Customer Support for further assistance.
3. Refer to point 1 & 2.

Creative doesnt sell 7.1 Speaker Systems anymore?

Not that my current speaker system was even intended for 7.1 Setup; I sitll use it for 5.1
I cannot find any 7.1 speaker systems, Creative is only selling one 5.1: Inspire T6160; I am using currently the Inspire: 7800
I think my volume control is becoming defective so I thought of finding something equivelant if not better but I'm not having any luck.
And I dont think it might be a big deal but my 7800 gives me 8 watts per channel I think; T6160 gives me 6watts per. And the subwoofer gives 24 watts vs 20 watts with 6160
But does anyone own this 6160? Think its worth it? Like I said the 7800 is a 7.1 Speaker Setup; and the 6160 is only a 5.1; again it doesnt matter to me except the watts I listed above.
Is creative gonna come out with a new set of speakers soon?
Thanks

I have bought today the Creative Inspire T7800 - T7900 use the subwoofer with my Creative Gigaworks S750 - 7 sat speakers. It is working well.

How to interconnect Creative 7.1 Speaker system to

HI All,?I have bought a Creative 7. Speaker system. I have connected it to my TV using the Audio Out (left & right) to the Auxiliary In of the 7. speaker system and now only 3 speakers are producing the sound. The center and the surround speakers have no output. Please guide me on how I can interconnect this 7. system with my TV and get the speakers working. Thanks in advance.Chris?

Headphone jack on all current Mac models (include latest aluminum iMac) doubles as SPDIF digital optical output as well. In other words, both analog (for headphone/line-out) and digital audio outputs are built into the same combo jack. Same analog/digital implementation for the audio input jack. Alternatively audio output can be sent through USB bus in digital form to external decoder. Thus unlike PC, the compact iMac does have many extra features already built-in.
All you need is an external 5.1 decoder to decode 5.1 digital output from headphone jack or USB port into analog format with three analog outputs for Creative Inspire T6060 5.1 speaker set (woofer/centre, front L/R, surround L/R). The only such decoder I have come across is Tutle Beach's Audio Advantage SRM (www.turtlebeach.com) though there are many surround audio decoders/receivers (mostly with SPDIF optical outputs) on sale in audio equipment shops. Take note that Creative Inspire T6060 is active speaker (amplifier built-in) whereas outputs from some surround decoders/receivers are meant for passive speakers. The difference is between low line level outputs (for active speakers) vs high amplified outputs (for passive speakers).
Optical Toslink cable with two different connectors on both ends (standard Toslink / 3.5mm Mini Plug) is required to connect between headphone jack output and external 5.1 decoder input. In case when USB port is used, any good USB cable built for peripherals (printer, external drive etc) will do.
Since I never play game and hardly watch movies with my new aluminum iMac, only good stereo audio is required for music appreciation with following setup:
iMac USB port -> Firestone Fubar3 DAC -> Firestone Tube Head Pre-amplifier (vacuum tube) -> Harman Kardon SoundStick2 speaker
Hope the information will help.

Can Creative made a 5.1 highend speaker system ?

Maybe Creative should made the next T7 Series with real 5.1 speakers system with 116db to complement the Sound Blaster Z series. T6 II speakers are only 2.1 speakers. They should make the 4 speakers detachable for T6 II and add 1 more speaker with a special clip to clip the center speaker ontop of pc LCD monitor.

Hello joebono,
I'm not sure which logitech system you have so I don't know what your setup is. I know on my computer my Logitech 5.1 sound system is USB.
With that being said there is not enough ports on the computer to connect all the cables to the computer to make a standard 5.1 surround system work. What you need is a speaker system where everything connects to the sub woofer and then you connect the woofer to the computer.
Alternatively like I mentioned on my own personal system is you have a speaker system powered through USB.
This thread also discusses the issue you are experiencing.
http://goo.gl/rCjYC
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Issues with Creative Speaker Systems 7700 and 7800

I have had very little success with Creative Inspire T7700 and P7800 speaker systems. The problems started when the left rear channel on my T7700 stopped working. I spent an hour or so localizing it down to the multi channel amplifier that's located in the sub woofer cabinet. I swapped the speakers around to see if the speaker was blown and I swapped the T7700 to my other computers to see if the problem was in my sound card (I have 3 computers 2 of them have Audigy cards and one of them has an X-FI sound card). The problem stayed with the left rear channel so it is definitely the T7700. Since it was off warranty I went and bought a P7800. After getting it home and unpacking all the speakers and making all the connections I found the left front channel non functional. I took that system back to the retailer and they exchanged it for another P7800. I brought that one home and found the right rear channel to be non functional. I returned that to the retailer and got my money back. I have several older speaker systems from Creative including a nice 5.1 channel system (the 5200) that has worked flawlessly for many years. My question is this: Why is the quality of these newer speaker systems so poor? And has anyone else had this kind of problem? So far I am living with the dead channel on the T7700 but would like to eventually get everything working again.

p3dlow,
Any speaker system that can receive input from a single 3.5mm stereo minijack should work with a MP3 player. Are you looking for a 2.1, 2.0, portable or docking station? Btw, exactly which player do you have?
Jason

Speaker systems use with creative mp3 player.

i was interested in a creative speaker system and was wonderin if they are any systems available that enable you to play music from them via my creative zen mp3 player? could someone help me out here.
many thanx

p3dlow,
Any speaker system that can receive input from a single 3.5mm stereo minijack should work with a MP3 player. Are you looking for a 2.1, 2.0, portable or docking station? Btw, exactly which player do you have?
Jason

Older creative speaker system. need support,but none listed??? perplexed here.

Don't you just love these sites or vendors, that over time discontinue support or any other for products yuo puchased from them. What is up with that?
My problem is I have the T7700 7.1 surround sound system i purchsed back in 2003 or thereabouts. Since that time, i have not had any issues with this system,but i do now, and find that the newest version of same essentially, is the PT7800. About the same sysem but newer, and TBH, not as good as what i have now.
I am trying to JUST get some customer support,which i think they should let one write an email to, and they use the typ. required fields for fill in boxes,of which none apply to what i'm trying to inquire about. I guess my only other alternative,which again is common these days, is to either go to this forum, and or last resort, 'call them in person over the phone. I guess i'll have to use that option, or just reside to the fact that i now have to buy another speaker system. That hurts only bercasue like us all, i have priorities all set for my needed future upgrades, and not the monies to invest in a new system. Come ot find out i have only (4) of the seven speakers working, and all are connected to right plugins on the woofer side panel.
Any suggestions on what i should do here

Sorry, but I'm not entirely clear about what you were trying to ask in your post.
As for Creative, they've changed their policy on support and will only provide support to products that are under warranty, and phone support is only available for a short period after purchase unless you buy a separate support/service package.
If you only have 4 satellite speakers, you can connect them as the front left and right, and rear left and right, and continue to use the speaker system as a 4 channel system. Be sure to set?the speaker set-up for your sound card to reflect that you have 4 channel (might be incorrectly called 4.1) system, otherwise sound may be directed to your missing speakers.
If all of your speakers are working and you only have sound coming from 4 speakers, then check the speaker or output set-up from your sound card or on-board sound to insure that you have set that up as a 7.1 system.

D200 Creative Wireless/Bluetooth Speaker system question?

Is the iPhone 4S and iPhone 5 compatible with the D200 Creative Wireless/Bluetooth Speaker system? I understand it says, "all other bluetooth enabled devices". Just want to make sure...thanks.

hi Adtrix,
Can you try making sure that the bluetooth driver from Lenovo support site is installed,
If your system is running Windows 8, Check the Lenovo Energy Management 7 version is installed. If not
uninstall the Lenovo Energy Management from Control Panel / Programs and try donwloading this.
Lenovo Energy Management Software 7.0
cagt26ww.exe
21.2MB
After installation
try hitting Fn+F5 and check the if bluetooth radio status is "ON'
Best Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Creative I-Trigue L3450 Speaker System

Similar Messages

Maybe you are looking for