Creative inspire 4.1 4400 remote?

hi, i need to replace my wired remote cos its been broken. Any chance where i could buy a new remote for this speaker? please some help. thank you.

check with their support.

Similar Messages

  • Creative Inspire 4.1 4400 - surround sound

    Creative Inspire 4.1 4400, Can I enjoy surround sound? If yes, please tell me the way to test the surround sound from the speakers. Is there any tool or softwares to test the surround sound from the speakers?
    Note: I don't have any sound card in my computer.
    Thanks
    S.P. Stalin.

    Does this problem only occur in certain programs? Because I have a similar problem with my sound suddenly dropping without warning. But it only happens when I'm playing music in Windows Media Player. If it does have something to do with the media player then I suspect it could be the "WOW effects plugin." I hope this helps, or at least narrows down your problem.

  • Creative Inspire 4.1 4400 speakers

    Hi, I just bought a new set of creative inspire 4.1 4400 speakers. I haven't got a 5.1 sound card. Can I just use it as a 2.1 instead, i.e. don't connect the other 2 rear speakers?

    Yup, that will work fine. Make sure you unplug the input at the speakers too (so only one input lead is connected).
    You could also use a 3.5mm headphone splitter at the pc side so the front sounds come from the rear too (and put the rear speakers next to the front speakers?).

  • Creative Inspire 4.1 4400 Sound problem.

    The volume of the speaker system tends to increase and then decreases with slightest touch of the volume control unit. At other times the volume would jump/change on it's own. I tried disconnecting the speakers and reconnecting my old set of 2-way pc speakers and they work perfectly, thereafter i reconnected the creative speakers but the problem is still there. Does anyone know what the problem could be. I am not a technical person, I just want my speakers to work fine. If it helps my PC system specs are : 1.7 ghz celeron
    Gigabyte P4 Titan 845PE M/board
    256 MB Ram
    Avance AC '97(6 channel) Onboard
    ATi Radeon 9200 28 MB
    Windows XP Home

    Does this problem only occur in certain programs? Because I have a similar problem with my sound suddenly dropping without warning. But it only happens when I'm playing music in Windows Media Player. If it does have something to do with the media player then I suspect it could be the "WOW effects plugin." I hope this helps, or at least narrows down your problem.

  • Satellite speakers not turning on in creative inspire 4400(4.1)

    i have bought this creative inspire 4.1 4400 about 2 months back. speakers were good untill now but from the recent times when i turn on the speakers, sound is genenated only through woofer and no sound comes out of satellite speakers. Then if i start incresing the volume to a high level sound comes from satellite speakers suddenly and the spekers will function normally untill i turn them off.
    to check whether the problem is with the sound card or the speakers, i have connected the speakers to the walkmen and the same problem occured. I have checked whether any connections are loose, but all are tight and inplace. Somebody please help me to get rid of this problem.
    - siva kumar reddy.ch.v

    sivakrdy,
    You will need to speak to Customer Support in this case if it's really a speaker problem.
    Jason

  • Rear input become low audio if both inputs are used in Inspire 4.1 4400

    Hi, I am having a problem with my creative 4 in . if you test the front input without connecting the Rear input the sound is OK and vise versa, but if you use both inputs the Rear input become low sound and the front input is ok. i check my source and there is no problem in left and right audio output. i checked the cables and interchange it also the same problem. any help is highly appreciated.

    hella wrote:
    I've come to these forums out of desperation as i am a complete armature in knowledge when it comes to audio stuff. Basically i have the Creative Inspire 4. 4400 speakers, had a long time now back when i got my pc. However recently i've got a new hdtv the Samsung LE23R7BX lcd, and what i wish to do is hook my speakers up to this television. Now the problem i'm having is this. The 4. creative speakers, the main lead the comes from the sub then connects into the pc, ends with two audio jacks, a green, and a black. Im sure you guys know what im on about, i don't know the proper name for this you see. Anyway s my tv doesn't have green/black audio ports like on my tv. Im guessing this is because its not a p, i also read something about the black/green being stereo inputs. Anyway s the type of connections my tv allows (audio connections) are av in (audio l/r), dvi in (audio l/r),pc in (however this only has port(audio) component in (audio l/r) etc. I have no idea if there's like adapters or anything yo can buy, if there is, if anyone can postt them, or give me a rough idea what i need to look for, buy etc. Would be much appreciated, as i like to watch my films though half decent speakers and not the crappy tv ones.
    cheers
    ps.
    sry for long post.Message Edited by hella on 04-24-200708:36 AM
    Hella,
    Unfortunately, you have to buy two seperate "Y" mini stereo (that's what those green and black cable jacks are called) to Left and Right RCA jacks. You use one for the Front Audio and the other for Rear Audio.
    I am no sure where you are from but you should be able to buy them from local electronics and audio store such as Radio Shack, Best Buy, Circuit City and/or Fry's Electronics if you happen to be lucky enough live near one. It should not cost more than 10 dollars a piece and you should not need it to be longer than 3 feet long.

  • Replacement Wired Remote Creative Inspire P5800

    Does anyone know whether you can buy a replacement wired remote from a Creative Inspire P5800? I've spent all morning going in circles on their website. The headphone socket is defective on mine, and I don't really want to buy a whole new system if I can help it.

    Hey, I had the same problem some time ago with the same set. My solution was to make the wire straight and don't twist it anywhere. After that it all worked fine. Good Luck

  • Creative Inspire T900 problem, just 2 front speakers work when connect to a laptop

    Hi everybody,
    I have just bought a Creative Inspire T7900 system, it's in good quality I think.
    But I just got a laptop without 5.1/6.1 or 7/ sound card ( one output only ), therefore i cannot use the 7.1 Audio Cable.
    I tried to use a stereo-to-stereo cable to connect my laptop to the input in the wired remote but only the front satellite speakers work. Is that a problem with the Wired Remote ? Or the problem with the system ?
    Can I laptop use all the speakers ?
    Please help me, thank you very much.

    thanhvtd86,
    There isn't any problem with the speaker system nor your laptop and it's normal. Stereo consists of only 2 channel and that's why you are experiencing output from only the two front speaker. You won't be able to utilize the full capability of the speaker if you don't have a 7.1 capable soundcard.
    Jason

  • Problem with Inspire 4.1 4400

    Hi?I am having Inspire 4.1 4400 speakers. My pc supports 5.1 HD audio. So I bought the Inspire 4400. The pc-to-woofer connector is 2 pin connector. When I tried to connect with that, am able to hear sounds from 2 speakers and woofer. Other 2 speakers are not working. So now am planned to buy a Creative Sound Blaster Audiy Value. Is this support Inspire 4.1 4400?My motherboard itself supports 5.1, so adding Creative Sound Blaster Audiy Value, to be problem?Or how I can use my existing pc to setup 4.1 system??

    well .. on normal surround systems the sound is played only on the 2 front speakers (+ center) and sub (im talking about music and normal movies). to play on all the speakers you need a surround environment something like a dvd or a surround game ... to play music and normal avi movies on all the speakers you should use a stereo x2 which ports the sound from the front speakers to the back speakers... your card might not have that option ( you could use audio spliters and put all the speakers on exit). creative sound cards have a stereo x2 as far as i know..
    Message Edited by McTRex on 11-16-2006 10:48 AM

  • Sound blaster Audigy 2zs platinum setup with creative inspire 5.1 digital 5

    what should the setup be for the sound blaster Audigy 2zs platinum and the reati've inspire 5. digital 5500 because with the decoder in i only get center fl fr on games. i dont get sound from the rear speakers.but when i take the decoder out and just plug the 3 leads straight into the back of my sound card i get 5. any help plz.i done a thx sound test with the decoder in it does fl i can hear it but i can hear the center as well
    and no sound comes out on the 2 rear speakers when doing the test.but when puting the 3 cables straight into the back of the sound card i runed the test and i could hear all the speakers fine even the rear speakers any help plz is this ment 2 happen or do i have to change some settings thanks for any help plz help me thanks.

    I Have had a problem for ages. I have the Audigy 2 ZS Platinum and Inspire 5. digital 5500.
    I have copied the advice I received/didnt recieve from creative.
    Best of luck
    Dear Martin
    Thanks for your reply
    I am sorry for the problem you are facing.
    To achieve outputs from all the speaker during speaker test, you will need to have an analog connection, or digital DIN connection.
    That will be possible if you connect the three line out jacks on your soundcard, to the three audio input (analog jacks->green,black,orange) on your speaker, if it has this connection. Or, you may connect them using Digital DIN, if they have this connection.
    If you are using digital connection (coaxial, optical), there will be no way to achieve sound output from all the speakers during 5. speaker test, as they carry stereo signal.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Creative Labs Europe:
    Original Message Follows:
    Hi
    I understand you must be busy, so no problem.
    No I do not hear EAX when in Pro-logic mode. I only hear (depending on the game in question)
    Half life two: front left-right and centre. NO rears
    Fear: Front, left, right, & centre. No rears
    Farcry Front left, right & centre. No Rears
    When I run your speaker test HISSSSS, No Rears, no front left or right
    Beats me?
    Regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 24 January 2006 5:44
    To: Martin
    Dear Martin
    I apologize for the delay on the answer.
    If you select Dolby Prologic mode on the decoder, are you able to listen
    the game audio, with EAX, in all of the speakers?
    Regarding to the optional bay dri've, you can purchase it from ou
    Best Regards
    (Mod Note: Name Removed)
    Original Message Follows:
    Hello
    Your email was helpful, unfortunately, not for my unit, you see I would
    have
    connected the Jack leads in by now if the inspire had Jack lead inputs
    as
    you describe
    Please don't think I am being sarcastic, but from reading the
    correspondence
    below it would seem as if your department is having difficulty
    understanding
    my problem.
    Also it would seem your department doesn't have the necessary technical
    information on your very own product, so to help with your dilemma I
    have
    taken photos of the input/outputs on the Inspire unit.
    You will clearly see the inspire has no inputs other than Coaxial and
    Optic.
    This leaves me back to my last post. I think the solution would be for
    me to
    purchase the correct processor, which would have come with the original
    sound card had I not been a little tight on the money front.
    I have attached a photo of the sound card with the processor, I would
    love
    to buy this processor but find myself unable to locate this product on
    your
    web site. Would you possibly be able to send me the correct link to this
    item so I can buy this Processor Please?
    Kind regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 8 January 2006 0:3
    To: Martin
    Subject: RE: CLE -
    Dear Martin
    Thanks for your reply
    Your soundcard is Audigy 2 ZS
    Your speaker is Creative Inspire 5. Digital 5500
    You will need to have a 3:3 cable(with the color green, black, orange)
    to connect your soundcard to your speaker, to achieve the 5. effects
    with games.
    Below is the connection:
    - Connect line out jack of Audigy 2 ZS
    to 'Front' of Creative Inspire 5. Digital 5500 using the green color
    connection
    - Connect line out 2 jack of Audigy 2 ZS
    to 'Rear' of Creative Inspire 5. Digital 5500 using the black color
    connection
    - Connect line out 3 jack of Audigy 2 ZS
    to 'Center/Subwoofer' of Creative Inspire 5. Digital 5500 using the
    orange color connection
    Once you have done the correct connection, play the game DOOM3.
    Ensure you have selected either the EAX or surround option in the game
    settings.
    Does it work?
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Creative Labs Europe
    Original Message Follows:
    You have lost me. Your sound card clearly states that I can have EAX
    surround decoding from the sound card I have purchased.
    All of the games on your web site claim to give me an environmental
    effect
    that will blow my mind, hence EAX.
    All I have done wrong is NOT buying your decoder that comes with the
    sound
    card. My mistake.
    All I want to do is re-address this issue and buy the correct
    decoder/processor.
    Can you point me to the correct link on your web site so I can buy the
    correct decoder/processor?
    As for the PCM out of the above cables, this foxes me as my other
    equipment
    only use Optical cabling on my Lexicon processor and from that I have DD
    7., DTS 7. and meridian 5. lossless.
    My issue is more to do with NO EAX from the rear and centre channels
    while
    in-game.
    Kind regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 6 January 2006 09:3
    To: Martin
    Subject: RE: CLE - Technical Support Request (KMM887805I6636L0KM)
    Dear Martin
    Thanks for your reply
    All commercial digital connection eg. optical or coaxial cable will only
    carry PCM stereo signal. If you want to output the signal to a surround
    5. with extra EAX environment effects, it will not be possible at all
    since it is only restricted to stereo channel signal.
    As per current industry limitations, we are bound to follow the standard
    one-signal output for all our SPDIF and Optical output jacks. This is
    something that is currently shared by all vendors for all products.
    Please note that all games are not dolby digital, even they are , it
    will require certain motherboard to encode it to dolby digital signal,
    which our soundcard does not support.
    You can only use analog connections to gain true 5. surround for
    gaming..
    email.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Creative Labs Europe
    Original Message Follows:
    Hi Joong
    I don't fully understand your email, but I do get the gist of what
    you're
    saying and understand I need to connect the analogue cable to fully
    appreciate the sound in EAX.
    Would you be able to tell me what product I could buy from your
    catalogue
    which would marry up with the sound card I have, as I understand now
    that
    the Inspire 5. will not do the job.
    Kind regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 6 January 2006 04:00
    To: Martin
    Subject: RE: CLE - Technical Support Request (KMM8875697I6636L0KM)
    Dear Martin
    Thank you for the reply.
    Computer games written with support for 3D audio do not require a Dolby
    Digital Interacti've Content Encoder (DICE) to output multichannel sound,
    with no exceptions. Sound devices that support the real time encoder
    technology from Dolby will simply receive the multichannel wave file
    output and encode it in real time to a somewhat modified Dolby Digital
    bitstream. Creative does not support the Dolby Digital Interacti've
    Content Encoder on any of its sound cards.
    The only difference between a Sound Blaster card and an audio card that
    has a real time encoder, is that you can make a one-wire, digital
    connection from your audio card to your home theater receiver and enjoy
    discrete multichannel sound from the game. However there will be a
    continuous, slight delay, known as "latency", as the encoder is creating
    and transmitting the bitstream, and of course the compression scheme
    being used is "lossy" (i.e. not bit-accurate).
    If you want to enjoy 3D audio in 3D enabled PC games in multichannel
    surround sound with a Sound Blaster card, it is recommended that you
    connect the analog outputs of the sound card directly to the analog
    inputs of the receiver. This will require 3 cables for 5. surround
    sound, one for front right and left, one for rear left and right, and
    another one for front center and subwoofer. Though it requires more
    cables than a real time encoder system, it will not have any latency
    issues. When connecting PC audio to a home theater receiver, Creative's
    latest sound cards such as Sound Blaster Audigy, Sound Blaster Audigy 2
    are likely to provide higher quality audio than any Dolby Digital real
    time encode system available for the PC today.
    Please retain all the previous correspondence when replying to this
    email.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Services
    Please do not use this link to submit technical queries
    Original Message Follows:
    Hi
    One particular game which has "in-game" DD is Farcry; I used this as my
    benchmark disc for DD and to push my Nvidia 7800 GTX GPU's (I have tried
    it
    on friend's machines and they get the full surround effect so I Know
    this
    version is ok. I also have ALL of the game patches & updates.
    I would like to point out that while playing Doom 3, Half Life 2,Fear,
    Colin
    McRae rally 04,FIFA 2004,Meddle of honour pacific assault, Rome, Shadow
    ops, All these games have EAX HD, which is enabled within the options
    menu
    "in-game", But I do not get ANY use out of the rear's and I might as
    well
    listen in stereo.
    No, inspire 5500 does not automatically switch while "in-game" when DD
    is present as you would expect, but does if it was a Movie, which makes
    me
    think the DD stream isn't getting to the processor.
    I originally thought I could put all this to rest if I could buy the
    control
    panel that would have come with the Sound card if I had not tried to
    save
    money, but every time I search your accessories site I get completely
    lost,
    it really isn't user friendly, the sub-menus are very time consuming and
    point you in the wrong direction because they are not categorised as Joe
    public would understand
    I downloaded your TEST Movies and creative demo player utility, ran it
    but
    still no EAX HD or DD if that were present.
    I want to put this card and Processor into my boys computer (which is
    the
    same Spec as mine and I will update to the FX series, but I am unwilling
    if
    I cannot find a logical reason why this set-up cannot work first.
    Would it have anything to do with the pins on the Digital out on the
    sound
    card plug, the one I bought and was attached to the last email? Only
    sending
    certain channels down to the processor?
    Regards
    Martin
    -----Original Message-----
    From: CLE Customer Support [[email][email protected]]mailto:[email protected][/url]]
    Sent: 5 January 2006 08:09
    To: Martin
    Subject: RE: CLE - Technical Support Request (KMM8868993I6636L0KM)
    Dear Martin
    Thanks for your reply
    Your speakers are fine as you mentioned that there is sound from all the
    speakers when you are playing movie.
    May i know what game are you playing when there are no sound from the
    rear speakers?
    Have you done the appropriate settings in the game to achieve the 5.
    sound?
    Is there any game patches that you will need to update?
    Does the Dolby Digital LED light up when you are playing the game?
    Please retain all the previous correspondence when replying to this
    email.
    Best Regards
    (Mod Note: Name Removed)
    Creative Customer Support Servic
    Original Message Follows:
    Hi
    I am sorry; I should have said the Inspire 5. was model number digital
    5500
    S/N SW330030026.
    The inspire has these connection on the back of the processor
    >From top/back of unit
    Audio Outputs
    Front
    Rear
    Centre/subwoofer
    Audio inputs
    Audio line in
    Coaxial
    Optical
    DIN
    The Din to a remotely located Subwoofer which has the speaker leads
    inputting into it. Plus power.
    Attached is the creative view of the controls menu and I have attached
    the
    invoice I was sent, it shows the lead I was told to fit.
    As I said, I can now hear DD5. while within a movie from ALL speakers
    BUT
    no sound from rears during IN GAME DD5.
    I do not use this PC for films only games.
    Regards
    Martin
    If you are having a digital connection, it is normal for only get only
    front left/right is you use the speaker test option.
    http://us.creative.com/support/kb/article.asp?l=3&sid=4858
    Speaker test only outputs from two front speakers?
    You mentioned that that you are unable to get any sound from the rear
    speakers when playing game right? May i know are you using a digital
    connection? May i know what speaker settings have been made under
    Creative Speaker settings?
    Do get back to me on the above.
    Thanks
    Original Message Follows:
    Operating System: Windows XP Professional x64 Edition
    Creative Model Number: SBO 350
    Computer Brand/Model: home made
    Processor/CPU: AMD 64
    Memory: Gig DDR 4
    BIOS Type/Revision: 5. 39
    System Board/Chipset: ASUS A8N-SLI Deluxe
    Detailed Problem Description:
    I have the above Sound card.
    I also own Inspire 5. amp/processor
    I Wanted to save money by connecting above sound
    card to amp/processor
    Connections on sound card made life very difficult
    I contacted Creative for help. you told me to buy
    an RCA to mini jack cord which also has other connections, from your
    web site, (I tried to find
    the product number for you, but your sub-menu
    system is so poor I couldn't locate the RCA/mini
    3.5 /to phono link for you) this cord connects
    directly into the digital in, on the sound card (3.5 Mini jack) to the
    coaxial input on the
    inspire 5. amp/processor.
    I have enabled ALL sp-diff settings and digital in
    setting on every program/utility/kitchen sink and all.
    I have an SP-Diff wire from DVD burner to creative
    sound card, and yes its enabled and digital only
    is selected.
    I can play a DVD and see the inspire 5.
    automatically change from Pro-logic to Dolby
    digital when it See's an AC-3 stream.
    when I try and play ANY game you say has EAX
    ,2,3,4 I cannot get any sound from my rear
    speakers (see above in Dolby Digital ALL speakers
    work correctly)
    when I enter the set-up menu within the creative
    software you supply with the sound card and select
    5. speaker, digital only, test the speakers via
    the white noise function, all i hear is left and
    right noise. no centre, no rears.
    I phoned you tech support line, the boy on the
    phone didn't have much of a clue about your
    product and I had to tell him what connections sit
    on the inspire 5. series amp/processor.
    I want to build another PC for my son, I want to
    add the FX series sound card and amp, but i am not
    willing to buy anything until i feel you have
    helped me to solve this problem first.
    please can you help, I am at the end of my tether
    with this sound card.
    kind regards
    Martin Waite
    Message Edited by Daniel-CL on 0-28-2006 :36 PM

  • Creative Inspire 4.1 in Car

    hello guys can i knw dat is it possible to install Creative Inspire 4.1 in car using a cigrette lighter socket.. as the it provides 2V & the sound system also requires 2V. waiting for ur replys

    i got same prob.. but on t7900.. crap remote.. only 3 months old.. do a search for my posts. and you will see many others with the same prob.. p.s costomer service help is rubish.. it been over a month now

  • Creative Inspire T6100

    my old creative set up has broke and now it is time to renew. my problem is.... i have a 5.1 decoder amp it sends the sound out separately to front L,R, back L,R, center and sub. this allows you to power them all separately. i am considering buying 2 sets of the creative inspire t6100 one set for the back L,R and one for the front L,R. and i would like to know what other users of the t6100 think of the system more to the point how many users have had problems. i am reserved on weather creative speakers last very long as my 2 sets of fps1600 have broke ( set the sub went and the other sounds like it is under water) and my 2.1 i-trigue 3200 (5 months old) (center speaker on my set up) is having problems with the wired remote. i am reluctant to switch companies as i think when working properly creative have an amazing sound. i would like to know if any one has any opinions on logitech (rival company if you will) as i have never heard anything from their speaker range. http://images.europe.creative.com/is.../dot-clear.gif

    Hi
    try cheking this link:
    http://forums.creative.com/creativelabs/board/message?board.id=speakers&message.id=486&view=by_d ate_ascending&page=
    and try do what is explained there
    cumpz
    PS: sorry my english

  • Creative Inspire 4.1 faulty wiring on volume dial

    I purchased a creative inspire 4.1 speaker system and the volume dial has a short in it or something so every little while the volume goes way up or down and its really annoying. I'm pretty sure the only faulty part is the dial and its wire thats attatched going into the subwoofer. Is there a way I can buy a new one? And can you tell me what that parts proper name is so I can email customer support or something?
    Thanks!

    i got same prob.. but on t7900.. crap remote.. only 3 months old.. do a search for my posts. and you will see many others with the same prob.. p.s costomer service help is rubish.. it been over a month now

  • Creative inspire 5700

    Hi all,
    i am planning to go for .Can i connect that to both pc as well as tv?
    i have sony KV-SW29M80/50.
    plz reply at the earliest...
    Rudra

    rudra wrote:
    Hi,
    Thx for the replies.. I live in INDIA and i enquired about the rates of inspire 5700? They are too costly It costs around 8000 indian rupees.And i can't spent that much .
    Now i have decided to go for creative Inspire 6.1 6600 It costs pretty less(7000 indian rupees).
    Whats ur opinion abt 6600 ? Is it worth that much ?
    And once i buy i want to use this speaker set i want to use for both for personal computer and My Television.
    Is it possible to use for both?
    Thx in advance
    Rudra
    6600 is quite old model too. You should check out their newer model of speaker like the I-Trigue 5600 if it's available in your country. With this speaker, there's a line in at the remote. With this line in, you can have the TV connected from rca to minijack to the remote and to top this off, the speaker itself have the CMSS feature from creative sound card and with this feature, you can upmix the tv sound to 5. soundfield and it definitely sound good.

  • Help setting up Creative Inspire T6100 (5.1) to HP Laptop

    Hi I recently bought Creative Inspire T600 (5.) speakers. I am unable to connect this to my HP DV6T laptop having only one input for speakers where as creative t600 has 3 pins in black, orange and green colors. I am stuck here. Could anyone please tell me how to connect the 5. speakers to my laptop? Appreciate your help.
    Arun.K.S

    Not really 100% sure (I only have a Creative T3030 2.1 that has a single 3.5mm jack) but from everything that I Googled, it looks like a stereo 3.5mm to RCA adapter and a Logitech 5.1 Game Console Adapter should work.
    http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP/ref=pd_si m_e_5
    http://www.amazon.com/Console-Adapter-Convert-Plugs-Single/dp/B0006U3ACY/ref=pd_ bxgy_e_img_b
    But to be safe, it might be best to check with Creative and see what they recommend for connecting it to the iMac.
    http://us.store.creative.com/Inspire-T6100/M/B000LIDLV6.htm
    Dennis

Maybe you are looking for