Creative Inspire 5.1 5300 stopped working due to blown H945 transistor on circuit board.

One night I was woken by a large humming noise coming from the bass box of my Inspire 5300. I killed the power and the noise went off. In the morning I inspected the circiut board contained in the bass unit and found two scorch marks under two transistors markes "H945". I downloaded the datasheet for them(http://www.datasheet4u.com/html/H/9/...vices.pdf.html) and found an equivalent nearest match in the BC82L, general purpose NPN transistor. These are available in the UK from both Maplins and RS Components for a few pence. After removing the transistors it turns out only one of them had burn marks under it, but I changed them both anyway. HEY PRESTO everything came back to normal.
Thank you to the other forum guys that put me in the right direction and?I can confirm BC82L is the right transistor.

I used the C945 and it worked perfectly....
It seems that many people have problems with the H945 transistor....

Similar Messages

  • How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activ

    How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP?  I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.

    The new serial number is to the right of your chosen download.

  • ITunes stops working.  The message says iTunes has stopped working due a problem to the program.  How do I find a solution?

    iTunes stops working.  The message says iTunes has stopped working due a problem to the program.  How do I find a solution?

    Hey there Warrior41,
    it sounds like you are unable to use iTunes because it either will not launch without this error, or you get the error when you are using it. Sorry to hear about that, that can be pretty aggravating. I would use the troubleshooting in the following article to help resolve the issue, named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Start with opening iTunes in Safe Mode and see if the issue persists. If not, the article will help you troubleshoot for 3rd party plugins that may be causing it:
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
    If that doesn't resolve the issue there are additional steps in the article if needed.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I have Adjobe photoshop Elements8..It stopped working due to : Error:150:30..what to do?

    I have Adobe photoshop Elements 8.it stopped working due to: Error: 150:30 note says to contact Adobe technical support for help.  Is there really an Ad
    obe technical support? Where?

    You got the answer in your other thread:
    http://forums.adobe.com/thread/1219408
    That's what you need.

  • Why my creative cloud icon disappear and stopped working when downloading software?

      Why my creative cloud icon disappear and stopped working when downloading software?

    You can try this step :
    Rename the opm.db file.
    Close the Creative Cloud application if it's running.
    Navigate to the OOBE folder.
    Windows: [System drive]:\Users\[username]\AppData\Local\Adobe\OOBE
    Mac OS: /User/<username>/Library/Application Support/Adobe/OOBE folder
    Rename the opm.db file to opm_old.db
    Launch Creative Cloud
    https://forums.adobe.com/message/5484303#5484303#5484303
    Regards
    Rajshree

  • 2 Speakers of Inspire T7700 7.1 stopped working

    Hello there!
    I have a problem with my Creative Inspire T7700 7.1 soundsystem.
    Two speakers, side and rear left have stopped working. Well, the speakers are okay but there is no output at those 2 female connectors in the woofer. There is just a silent noise all the time. The speakers are fine (I plugged them in an other output and they work) so the problem is that there is no signal at those two outputs.
    Some days ago it worked fine. I don't know why those are broken - what are my options?

    bump

  • Creative cloud desktop application manager stopped working

    I've been using CC for about 6 months with no problems. However, after updating Adobe Acrobat, the CC desktop app manager stopped working. I tried reinstalling it, and then running the Creative Cloud set-up, but that didn't work either. It looks like it's trying and then the set-up just stops. Nothing. No error message. Just won't work. I'm using Windows 7 Professional.

    uninstall, clean per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 and then reinstall, Download Adobe Creative Cloud apps | Free Adobe CC trial

  • Creative Inspire 5.1 5300 troubles

    Hello ;
    My Creative 5300 speakers that served me now for more than 10 years are giving me troubles;
    Middle front speaker => no sound
    Left and right front speakers => low volume sound
    Left and right rear speakers => high volume sound
    What I've already done :
    checked all jacks and plugs
    changed my X-Fi Titanium fatality pro into another PCI-e slot
    Uninstalled drivers and software following the Creative FAQ http://support.creative.com/kb/ShowA...aspx?sid=55438
    Running windows 7 Home Premium 64 bit and Creative driver 2.17.9
    Can I assume that my speakers are dead ?
    Any ideas or suggestions ?
    Also It's been so long that I bought my Creative speakers what is the today equivelant of Inspire 5.1 5300 ?

    Hi there,
    i have a inspire 5.1 5300 with wave sound blaster live! 5.1
    my problem is that only the rear input gives the speakers any sound!The other three don't give any sound to the speakers!
    And i would like to know how to take maximum adavantage of my speakers....
    i hope someone tells me i have a solution......

  • Acrobat (and rest of CS 6) stops working due to license problems

    Hi,
    I just purchased Adobe Creative Suite Standard 6 in Jan 2015. Acrobat works for a 60 day period and then becomes inactive (I don't use other components that often but am assuming those also stop working). The first time I had this happen, I tried the forums and saw the recommendation to de-activate and re-activate, which I did. That however, seems to have only re-set the clock back for another 60 day trial. I've already purchased the software, is there any way I can actually continue to use it without having to go through this painful de-activation and activation every 60 days.
    Adobe used to have user friendly products but their new products appear to be particularly user unfriendly.
    -GS

    Hi,
    I just purchased Adobe Creative Suite Standard 6 in Jan 2015. Acrobat works for a 60 day period and then becomes inactive (I don't use other components that often but am assuming those also stop working). The first time I had this happen, I tried the forums and saw the recommendation to de-activate and re-activate, which I did. That however, seems to have only re-set the clock back for another 60 day trial. I've already purchased the software, is there any way I can actually continue to use it without having to go through this painful de-activation and activation every 60 days.
    Adobe used to have user friendly products but their new products appear to be particularly user unfriendly.
    -GS

  • Changed password on Creative Cloud account - will apps stop working?

    Hi,
    My laptop with Creative Cloud CS6 installed was stolen in a burglary at our house. Fortunately I didn't lose much as I had recently done a clean install (to install CS6!)
    I have changed my password on all my accounts, including Creative Cloud. Does this mean that
    1) The apps installed will not longer work as they cannot get a license
    2) When I get a replacement laptop I will be able to activate Creative Cloud on that laptop
    I am concerned because, while my insurance is replacing hardware, it doesn't cover software.
    Thanks,
    Chris.

    Many thanks for the reply.
    Will the apps stop working after 30days when they prompt to be re-authenticated? Does authentication require someone to know the Adobe ID and password?
    Thanks,
    Chris.

  • Itunes stopped working due to Data Execution Prevention

    my problem started... i had manually removed my older version of itunes n installed e updated version. after every thing is done.. i double-clicked on my shortcut of itunes, it came out with "itunes has stopped working, a problem caused to stop e prog to stop working correctly"
    and it came out is the DEP caused it.
    so after all e guides i've been through.. i thought turning e DEP off would help me turning on my itunes without any disturbance.. but i cant.. cos it says itunes will only working when DEP is enabled.
    can anyone help me?!

    OK, many eye-blearying hours of reading up on DEP later and here is what I have managed to find out. Apparently, even Microsoft doesn't know how it works. Depending on which MSDN library article you read, the 32-bit version of Vista either does or does not support hardware DEP. Personally, I'm going to go with does, because this is dependent on whether the processor is NX or XD capable. If your processor IS NX or XD capable, see if you can disable this in the BIOS. That will take care of the hardware flavour.
    The software DEP is configureable in many ways (we've already discussed a few), but guess what, YOU CAN TURN IT OFF. Vista does not use ntldr or boot.ini. It uses a registry hive called the Boot Configuration Data to configure the boot environment. This can be manipulated in several ways, the easiest being the BCDEdit function.
    *****Before doing this, read lots on what you are about to attempt. You are about to modify your registry. Changes take effect immediately and can have severe consequences. By turning off DEP, you are disabling one of the security features in Windows that helps defeat buffer overrun types of attacks, to name one. Additionally, you may brick your system or render it unbootable. I do not recommend this solution, nor will I accept any responsibility for unforeseen consequences resulting from it. In other words....Your Call.*******
    Open up a command line interface, the syntax is as follows;
    *bcdedit /set [{ID}] nx AlwaysOff*
    The optional {ID} is the GUID for the specific Windows boot loader boot entry that you want to configure. If you do not specify an {ID}, the command modifies the current operating system boot entry.
    That's it, you're done. DEP is now off. Good Luck.
    Personally, I would suggest getting the most up-to-date version of iTunes that you can. It should be DEP compliant.

  • Creative Cloud Illustrator & Photoshop 'has stopped working' - 'windows is checking for a solution..

    Hello,
    Up until recently, Photoshop & Illustrator stopped working. When I would open the program it would begin to load and then come up with the message ' Adobe Photoshop has stopped working'
    After which there would be another message ' Windows is checking for  solution to the problem'
    and then finally ' A problem caused the program to stop working correctly, windows will lose the program and notify you if a solution is available.'
    Indesign on startup seems to load normally and is fine.
    Do help, time is of the essence.
    Thank you,
    Tanya
    [email protected]

    This is the simplest fix, if you're still having a problem with it.  I had the same problem, am running Windows 8.1.  Just be sure to reboot after you copy the dll (dynamic link library) file indicated.
    Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    to: C:\Program Files (x86)\iTunes
    Let me know if you have a problem.

  • Creative Suite 4 - Licensing has stopped working

    I was using Adobe Acrobat 9 Pro today, and I received an error to restart my PC, and open another program.  When I tried to open Photoshop, I received an error message:  "Licensing for this product has stopped working.  This product has encountered a problem which requires that you restart your computer before it can be launched.  If you continue to see this message after restarting your computer, please contact either your IT administrator or Adobe Technical Support for help, and mention the error code shown at the bottom of this screen.  Error  148:3 "
    What is wrong, and how can I rectify this?  Has anyone heard of this problem recently?

    Error "Licensing has stopped working" | Windows
    Mylenium

  • Creative inspire 7900 still doesn't work after buying a new cable

    so everyone told me to get the 3.5mm mini jack cable, because i only had the 3-4 cable. So i connected the 3.5mm, but still i get no sound from the side or rear speakers when i test the surround with realtek HD audio manager, only the front speakers works.

    Hey Amigo, I had the same problem and here is the fix I found that works on my 7800 speakers. I believe it should work on yours since the cables are the same. First, unplug the four to three wire connectors from the back of the card and speaker amp. Then run the extra 3.5mm plug from the "black" on the back of your card to "rear speakers" on the back of your amp. (make sure your 3.5 connector is a stereo one and not phono or mono. It'll have two black rings around the male end) Then, reverse your 4/3 plug. For this to work with the existing plug you must do this. The end with the four plugs you will now connect to the back of your sound card instead of the other way around. Hook the green to green, orange to orange and the black plug to the grey on your card. Do not use the grey plug, just let it hang. Then on the back of your speaker box hook the orange to orange (center/ subwoofer), green to green (front) and the black plug to grey (side). Then on the creative control panel go to the THX setting and select your speakers to 7.1. From there you can click on each individual speaker and test them. They should work great and you are set to go. Just for info I am running the X-fi Titanium Pro and Inspire 7800 speakers. From what I see the connections are the same as the 7900's. Good luck and enjoy the great sounds!
    Message Edited by tbratz on 08-07-2008 06:42 PM

  • Adobe Photoshop Elements Organizer Stops Working due to Sony AVCHD files

    Hello I installed Adobe Photoshop elements and have been having trouble with it crashing.
    To solve this problem I deleted my Catalog and added a Catalog with only one folder.
    This folder has photos, in JPEG and Sony .ARW format as well as AVCHD files.
    I found that by removiing the AVCHD files from the catalog the SW would no longer crash.
    This really is not a practical solution since my PC has many folders with many AVC files.
    I am trying to see if there is a SW patch or another way to address this issue.
    Thanks,

    It might work but this is not a practical solution.
    I have many picture folders on my pc and several of these have AVC files.
    My intention was to use Photo Shop Essentials to edit my pictures. Unfortunately the "Organizer" app crashes when trying to work with my Catalog.
    I have narrowed it down to only happening when there are AVC files in my folders. I have seen others have this issue and I found the issue by what they recommended.
    Sadly if I am unable to get this to work with my current folders I will have to dump Essentials for another application.

Maybe you are looking for

  • Mavericks download stops at 1.03GB

    iMac 9.1 2.66GHz 8GB RAM Running Snow Leopard 10.6.8 Trying to download Mavericks, the download stops every time at 1.03GB, and clicking retry doesn't start it. I get the message "The application you tried to download could not be downloaded. Check y

  • Htmldb : Problem with multirows update on forms

    Hi, I'm working on Htmldb V1.6 and I have a very surprise mistake. in fact, I've created forms based on table and Summit button to update only multirows. I did some test but after fews minutes, there were something wrong with process, when I change v

  • Oracle text contains and mixed queries

    Trying to optimize the following sql statement using oracle text.  When postal code is given, I would like to limit the contains to only filter the smaller subset.  Both of these queries produce the same results in the same amount of time with practi

  • Rule 11 functionality for India Localization OSP Process

    Hi Can Any one tell us How to implement Rule 11 Functionality for India Localization OSP Process. Pls let us know how to map this functionality either to incorporate it in Purchasing or Order management module Also can any one provide us the document

  • Windows 2008 R2 users allow to install some apps

    Dear ALL, We have windows 2008 R2 as domain controller and file server with more than 500 users. all domain users don't have any rights to install any software or application without administrator rights. All users having reliance data card for acces