Creative Inspire 5200 - Rear speakers echoing effect

The front 3 speakers are fine - sound is normal, crisp and clear. But the 2 rear speakers have sorta fuzzy echoing thing going on... it's kinda hard to describe. And I just want to know is this normal... Maybe creating a surroudn sound illusion thing... ?

Hey budd would you try a bios update and see if that don't help all you need to do is visit the computer companys website if it's a brand computer and look for there support page then downloads and bios updates but if you built the computer or some one else did then get the motherboard model from them or google search for software that can find the model and junk like that and see if you can get that bios upfated and after you update it preset the bios to defaults then try the sound again and see if that don't make a diffrence?
You just may have to get a new soundcard as well for the sytem to work with the card. I hear a lot about them 5.1 cards having problems with some of these new suround systems and it seems to be a incompatibility isue but thats up to you I mean if you wanted to try you could hook the speakers to another computer and see if you get better luck and if so you know it's the card
Good Luck and sorry if this is not what kind of news you were looking for but this is all that I can come up with

Similar Messages

Connecting Creative Inspire 5.1 speakers to DVD player

Hi,
I have a LG DVD Player (DSI 8352) which gives 5.1 home theatre (dolby decoder) output.
If I buy Creative Inspire 5.1 speakers (5200 or 5700), how do I connect them ? Through RCA Stereo cables ? Would there be any compatibility issues ?
Please suggest the 5.1 speakers that would suit my requirement (no decoder / only amplifier) ..
Plz reply back to [email protected]
Thanks,Sambath

Creative offers many speaker systems that will fit your needs, without decoder.
You mentioned the Inspire 5700 system; this system comes with a decoder/amplifier, and wouldnt actually be what you'r looking for.
If your looking for awesome sound-quality, and good power, I can recommend the 5.1 Megaworks system, though this system can get quite expensive, you'll get what you pay for.
The megaworks (like "all" other creative speaker systems, got a built in amplifier in the subwoofer, where you connect all the speakers.)
To connect the speakers to the DVD-player, you connect the multichannel output on the DVD-player, to the multichannel input on the back of the subwoofer. (three stereo minijack inputs.)
You may need some RCA-to-minijack adapters, so that the multichannel audio cable that comes with the megaworks, will fit on your DVD-players output.

Creative Inspire 5200 5.1 Bass setting

I am currently using Creative inspire 5200 5.1 speaker system with X-fi Xtreme music sound card,can anybody suggest me the best setting so that i can get best bass for music,and Dolby/dts movies?.
i did try the +5 dB subwoofer gain from THX console,but that makes more of a unnatural sound....so pls do suggest the best setting possible for getting perfect sound out of my speakers...
thanks in advance,
karthik

Just adjust according to how you like it. Everyone preferences is different so their so called "best setting" is different too.

Creative Inspire 5200 - Bass crackle

Hi,
I have creative inspire 5200 connected to Philips DVD Player. The combination works fine with less bass level. When i increase the bass level, i am experiencing crackle in subwoofer where as satellite speaker works fine(no distortion in sound). The distortion is not continuous, it comes and goes off(once in while). Please let me know the solution for this.
Regards
Abhinandan

(Re: Creative Inspire 5200 - Bass crackle, abhinandan_gs,
I suspect you're just overdriving the subwoofer input, and when you have an LFE signal, you're experiencing digital clipping.
CL speakers are designed to accept an LFE-level signal which is 10dB softer than standard line-level. The DVD player is putting out line-level, and then the speakers are amplifying it +10db further, which puts it out of balance with the others. To test this, disconnect the subwoofer cable and see if the crackle goes away. I expect you will still have bass coming from the subwoofer, because the normal bass is in the non-LFE channels, and the speaker crossover will redirect that to the subwoofer, but I don't know what kind of bass management the DVD player might also do. If you think that's the problem, the next thing to do is to lower the subwoofer output 0dB before it reaches the speaker input. If you can't do that with the DVD player's controls, we can go into how to add a simple volume control to the subwoofer cable connection.
-Dave
?[email protected]

Creative Decoder DDTS-100 with Creative Inspire 5200

Hi Guys,
Basically I wana hook up my PC ,XBOX and TV onto the Creative Inspire 5200.
I found out a couple of options , one of them is Creative DDTS-00.
Can anybody tell me if they are using this device , how good is it compared to a decoder amp by YAMAHA or SONY.
Which is a preferable solution ?
Thanx in advance.
Visu.

DudeRighteous,
Have you tried adjusting the levels for the center down and the other speakers up? On the main volume knob press the select button and it will select a specific speaker set to adjust the volume for. Try changing these settings and see if that helps.
Jeremy

Safety of the power supply of Creative Inspire 5200

The power specifications of the AC adapter of Creative Inspire 5200 shows 12V 4.2A. When I checked with multimeter it shows 12V only in the AC side of the multimeter. My younger son has the habit of pulling the power cord from the sub woofer and touching the pin of that adapter. Is it safe. I want to know whether The actual volatage should be shown in AC or DC in multimeter.

Hello,
i think you have your output-signal not in the loop. So you get only the start-value (0 Volt) and the end-value (25 Volt).
Here you have an example. You have to change the hardware-settings, but you can use the loop.
Regards
Markus Weigl
NI
Attachments:
Spannungsausgabe.vi ‏101 KB

5.1 creative inspire 5200 hlep

I got some Creative inspire speakers and they didn't work cause I didn't have the right sound card. I then went to buy a sound blaster li've! sound card and they still don't work. I am useing windows xp and I can't find the CMSS anywhere includeing EAX. How do i fix this problem? All I wan't are these speakers to work right.
cypres
P.S. if i plug the green cord into the back of the cpu where the sound card isn't I can get two of the speakers to work.PLEASE HELP!!!

Which exact sound card you have? Perhaps you can post up the model number. I suspect you have got a old version of Sound Blaster Live! that support only 4 speaker.
Jason

Creative inspire 5200 speakers

hello,
I am planning to buy a , i just wanna know if my motherboard buit in sound card can support these speakers. my board is a ECS KT600AL. I dont know if all sub and satellite will work on a Realtek ALC655 6-Channel audio CODEC which was the specification on my board. am really a newbie when it comes to these stuff. lastely is the creative 5200 can be connected directly to a TV or do i need a special connector or something. Am really looking forward in helping me regarding my prob. thanks in advance
gxtron

Hey budd the SoundBlaster Live 5.1 is a great sound card for what you want but I can't make that desicion but I can help you make it by telling you 2 things The Live 5.1 is a grate card but some of these new sound systems don't like some of the older cards and cause some of the channels to hiss and diffrent things so if you have a sound system that was made near the making of the Live 5.1 then the card shouldn't have any problems with the sound system.
blaster audigy LS on the other hand people are telling me this card is the shiznick hehe... I mean if I had a choice over prices and cards on detail in sound I would schoose the blaster audigy LS just because it's compatible with new sound systems, and grate in sound for DVD and Music and of course games hehe.
Ither choice you make will be good but like I said you will have to take chances on your sound system if you get the live 5.1 card .
I do hope this is what you were looking for also please update your drivers for the new card ounce you get it and also it would be good to update the bios.
Good Luck
Message Edited by RLemmon on 12-27-2004 03:26 AM

Creative Inspire 5.1 speakers and notebook problems

Hi,
I have my digital 5500 speakers connected to my old desktop computer which has the Audigy soundblaster card and the whole system works fine - mostly. I would like to connect the speakers to my notebook as that system is much more efficient and I feel wouldn't freeze during playback of music like the desktop. However I have a Realtek AC(7 soundcard in the notebook and when I plug the Creative speakers in I get no sound at all. If I use my cheap 2 speakers it works fine. I guess maybe I need to reconfigure the notebook but have no idea if this is possible and if it is how to do it. Does anyone have any suggestions please? I am using XP on both systems. I have been to the Realtek site but there seems to be no support there.

Gilli
What is the connection type you used for the notebook to the speaker? Coaxial/Optical/Line IN?
Try using a Stereo minijack to Stereo minijack cable to connect from your sound card front audio jack to the Analog Line In on the decoder. Ensure that you have selected the Input source to 'LINE IN' from the decoder box.
Your best bet would be to check with your notebook vendor for additional assistance as you may need to enable certain setting from your notebook.
Jason

My Creative Inspire 6.1 speakers aren't producing any sound!

I have an Audigy2 Platinum Ex with Inspire 6.1 surround speakers.A few weeks ago, I stopped getting sounds from the speakers. The green light was on, and when I plugged in some headphones I could hear sound. Also, I have my system connected via a S/PDIF to a 5.1 receiver. This only allows me stereo sound (unless I play something pre encoded with Dolby 5.1/6.1 or DTS). I'd like to know WHAT IS THE MATTER!?!
Thank you for your time.

Okay... I plugged the head phones into the VOLUME CONTROL/CONTROL POD of the speakers. All the cables are attached. I just ripped, er I should say unplugged everything and and retried from scratch. Same problem.
I think the Sub/LFE hub died. That could be the only possible explanation. HOW DO I GO ABOUT GETTING A REPLACEMENT?!? Do they even sell these anymore? I understand that they have been discontinued. What do I do? Can I send it in to you as an RMA?
Give me alternatives... PLEASE!
Dustin
Catherina-CL wrote:
Dustin,
On the first point, when you say you plugged in headphones and they worked, do you mean you plugged them into the soundcard directly, or in the volume control/control pod of the speakers? Try them with another source if you can, and make sure all the cables are attached properly.
On the second point, this is normal. The connection you're using (coaxial or optical SPDIF) can only pass over a stereo PCM signal, or an encoded stream. You can read up more on this topic here.
Cat

Creative Inspire 6.1 Speakers Green Light on remote is dead

the green light on the wired remote is dead
When I do turn the sound on, the green light is still dead. But I do hear a very loud static hissing noise.
Its impossible to play anything through these speakers. I'm guessing that this may be an ac adapter
problem? Could it be fixed by just replacing my current adapter?
Thanks for your time folks.

Hi Jason,
Thanks for the reply. In answer to your question, yes, the adapter does feel warm. You are probably right that the problem lies within the subwoofer or wired remote. However, I noticed I got the same harsh, static sound when i disconnected the creative speaker systems and connected the computer with my own stereo system. Could this mean that my soundcard (an SB Audigy) is also faulty?

How to get Realtek HD Audio to work with Creative Inspire 5.1 5200?

Hi,
I have a problem with correctly setting the Realtek HD Audio with my Creative Inspire 5200 5.1 speaker set. I don't get any sound on all of them when test button is clicked, only surround speakers work. They were working on my old PC. I did a search on this forum and Internet, but could not find any solution to this specific problem.
Setting:
* MSI drivers: 6.0.1.6267, directx 11, ALC 892
* Speakers set to default audio device
* Plugged in 3 jacks, colors matching (3 in a row - black:rear, orange: center/subwoofer, green:side speakers)
* On Realtek HD Audio Manager: Speaker configuration: 5.1 Speaker; Optional spakers: center, subwoofer, rear pair checked; full range speakers: front left and right and surround speakers checked; speaker fill/swap/bass management disabled.
What I get:
* left surround clicked: OK
* right surround clicked: OK
* No sound from others
Tests:
* Checked not muted
* Checked volume control, not set to zero
* Rechecked cables from MB to Creative Subwoofer
* Rechecked cables from Creative Subwoofer to speakers
* Checked other spaker configuration settings:
- Stereo : no sound
- Quadro: only surround spakers OK
- 7.1: surround spakers OK + left 2nd surround sound comes from right front speaker
Any directions are very much appreciated
Cheers
Bülent
PS: See signature for my setup

Quote from: syncman on 30-October-10, 03:10:54
I get something very similar with my Logitech 5.1 setup. However, I'm using a Creative Pro sound card. Some reminders for you. Remember that everyday normal sound is not encoded DD 5.1, i.e. Windows prompts, MP3, etc. 2 channel left and right stereo sound only nets 2 speakers even though you have 5.1. Unless you've set the sound card, or speaker controler to convert normal 2 channel left and right stereo to DD 5.1 you will only hear 2 speakers. It takes software that's dolby digital encoded to bring all 5.1 speakers to life. For example for every day computer sound my logitch speaker controller is set to "stereo x 2.1". With this setting the contoller sends 2 channel stereo to the front 2 speakers as well as rear 2 speakers plus the sub woofer. My center channel stays quiet until I change the controller effect to DD 5.1. I would change the speaker controller to DD 5.1 if I were to watch a DD 5.1 encoded DVD movie, or play a DD 5.1 encoded game. Keep in mind unless the software is encoded DD 5.1 anything you hear through all 5.1 speakers is SIMULATED! IMO the stereo x 2.1 sounds MUCH better than simulated DD 5.1.
Thank you for your answer, but I couldn't go so far yet I know some about sound and sound setups as I'm working in this area, namely video editing, sound processing, montage etc.
The problem is at "test button" level, somehow the mobo cannot drive the correct lines :(

How to connect my Inspire 5200 5.1 Speakers to my XBOX? Pls Help!!!

Dear all,
I am in need of dire assistance to connect my Creative Inspire 5200 5.1 Speakers to my XBOX. If possible, I would like to maintain the full 5.1 functionality when watching my movies and playing games (that support 5.1 sound).
What other cables, adaptors, connectors do I need? Pls help... I am really not experienced with TV electronics, wires and stuff.

Ok, I did a search & found a post by NsOmNiA930 :
>>>
Or, you could make a custom analog adapter and get fake 5.1.You'll need 2 RCA couplers (or a coupler with 4 RCA Female jacks), a dual RCA to single 1/8 mini jack adapter, a single 1/8 female - 2 /8 male adapter, 2 /8 couplers, and a headphone splitter. It should look like this:RCA from Xbox Dual RCA CouplerRCA to 1/8" adapter(1)Female to (2)Male Adapter(2) 1/8" Coupler on Male ends of previous adapterHeadphone splitter on one of the couplersIMPORTANT! BACK MUST BE BY ITSELF ON THE CORRECT /8" END! CENTER AND FRONT SHOULD BE ON THE HEADPHONE ADAPTER! IN ORDER TO FIND THE CORRECT CHANNEL, DO A 5.1 TEST ON YOUR SPEAKERS AND CONFIGURE APPROPRIATELY!
>>>
Ok, can some kind soul translate that into English? What are all these components(adapter, coupler, headphone jack, 1/8?) What do they look like?

Which speaker system is better: Inspire 5200 or 5300?

Hi,
I'm just about to :smileyindifferent: buy new Creative speaker systems. Unfortunately, in my country and city options are scarce. Only few models are available and I am trying to get a good, decent sound, with good bass for bassy songs (i.e. dance, hip-hop), and good sound in general for PC-based games and DVDs.
I am given two choices: Creative Inspire 5200 and 5300. The big question: which one is better? I supposed that since 5300 is a bigger number than 5200, the 5300s should be better; but I may be wrong (e.g. the total RMS power of the 5200s is slightly higher than the 5300s!), so... somebody can give me a piece of advice on this?
I am willing to spend as much as USD$50.00 on my new speakers... so if someone has better speakers in mind for that price, I'm open to suggestions. With luck, I can give them a try.
Regards.

Logic does not run on Windows computers anymore, only on Apple Hardware.

Connecting Inspire 5200 to X-Fi Xtreme Noteb

Hi,?
I have a set of creative Inspire 5200 5. speaker and I want to connect them to my notebook with the X-Fi Xtreme Notebook card.
Before buying the card, I want to make sure I can connect the speaker to the speaker docking module and I also want to know if I can connect my Xbox 360 optical cable to the card to have a 5. sound with the speaker.
If anyone know if this will work or know a better way to connect all of this please let me know.
Thx.

Lazy to search? It's been here (and there) 'bout thousand times already so it shouldn't be hard to find...
?....actually no,i thought my post clearly stated that i had seen conflicting posts and diagrams with regards to which was the right way to conenct the headers to the pins,and i was just looking for clarification. I apologise if i wasent clear in enough in this. Anyway,thankyou for taking yor time to respond and i will look into the link you gave me and see if its a good solution. Incidenatlly,another thought occured to me this morning.As i have the t7900 wired remote sat on my desk its entirely possible to run a?3.5mm male/female jack extension from the mic input of my x-fi card and place it next to my wired remote,having the mic jack of headset in this extension,and the headphones jack in the wired remote input.....is this a viable solution,and would this not compromise quality?again ty for your time. sc_

Creative Inspire 5200 - Rear speakers echoing effect

Similar Messages

Maybe you are looking for