Creative inspire 5700

Hi all,
i am planning to go for .Can i connect that to both pc as well as tv?
i have sony KV-SW29M80/50.
plz reply at the earliest...
Rudra

rudra wrote:
Hi,
Thx for the replies.. I live in INDIA and i enquired about the rates of inspire 5700? They are too costly It costs around 8000 indian rupees.And i can't spent that much .
Now i have decided to go for creative Inspire 6.1 6600 It costs pretty less(7000 indian rupees).
Whats ur opinion abt 6600 ? Is it worth that much ?
And once i buy i want to use this speaker set i want to use for both for personal computer and My Television.
Is it possible to use for both?
Thx in advance
Rudra
6600 is quite old model too. You should check out their newer model of speaker like the I-Trigue 5600 if it's available in your country. With this speaker, there's a line in at the remote. With this line in, you can have the TV connected from rca to minijack to the remote and to top this off, the speaker itself have the CMSS feature from creative sound card and with this feature, you can upmix the tv sound to 5. soundfield and it definitely sound good.

Similar Messages

Creative Inspire 5700 + X

Which is the best X-fi combination for? Creative Inspire 5700 (5.) speaker. Tom?

Hello!
Thanks a lot for the answer. Now i improved my knowledge, because i already was in despair.
. I have connected my acoustic system and sound card via Analog cable and works only 4 channels: Front L/R and Rear L/R, without Front Center and Sub - as i understood it's correct, right?
2. When i tried to install this driver my system just buzzed and needed to Reboot computer, maybe driver does not compatible with my system.
3. Why does Creative not support Digital/SPDIF for acoustic system like my SPDIF or Digital I/O has better quality of sound then Analog, is not it's
Thanks in advance!
Greeting,
Artem

Creative Inspire 5700 VS Realtek. SUB NOT WORKING :(

Dear all
I recently beefed up my PC - tried to run my lovely Inspire 5700 through optical on my new Gigabyte motherboard, which didn't work (only got stereo sound) so i tried analoge (which only gave me a 5 speaker sound, no bass). I have tried messing around with the realtek dashboard but I can't get it to work!!
How can I get my bass to work and get a full 5.1 surround sound using the two analogue pins and a realtek software?
Best Regards

D'oh! Well, that explains it. I should like to point out that it is a bit confusing for buyers to introduce a cable standard (nobody else in the business uses that kind auf Digital DIN connection, AFAIK) and then using it for something else altogether. The DIN connection was one of the reasons I chose the Sound Blaster over a competing product. I must say that I'm a bit diappointed since even the Users Guide I downloaded (to make sure I got the right product) states that the DIN socket is used for "connecting digital in-/outputs of multichannel speaker systems".
All in all, it still bugs me that I won't get 5. on my 5700 except for the obvious Dolby Digital pass-through. Any way this might be done via a software update? Maybe somehow integrating a Dolby Digital encoder so I could use the Coax or Optical Out?
Regards,
JoergMessage Edited by Joerg_McFly on 08-25-2006 :52 AM

Creative Inspire 5700 Digital spare DIN cable

Hi,
im in the UK.
i've had the above speakers for a while now, but the 9 pin DIN(Female To Female) from the back of the amp module to the soundcard module has broken and im trying to get a replacement.
Maplins dont do a 9 pin DIN at all, and i cant find anywhere to get spares for this speaker system.
any help would be greatly appreciated.
maxd

Hi there, im wanting the same cable but finding it hard to track down.
Just to add, i need a 9 pin - 9 pin din to connect my creative 6.1 setup to an an external usb audigy 2 VE. Hopefully this would mean no need for the wired remote that connects to the 6.1 speakers? Can anyone confirm this?
Cheers, i'll keep looking.
EAJ

Connecting laptop to inspire 5700 decoder?

I've got the Creative Inspire 5700 5. product set up on my old desktop. Had that a few years. ?It's got 5 speakers, a sub and the decoder amp.
I'm wondering how I can connect my laptop up to it. The laptop is pretty basic and doesn't have an ExpressCard, but does have PCMIA slot.
Anyway looking at the current products I was wondering if th best option would be the X-fi Surround 5. - would I connect the digital outpt on that to the digital in on my Inspire decoder?
Any advice appreciated.

.....so having spent the day looking through the forums I've reached the conclusion that Creative have left everyone who invested in the 5700s high and dry and full functionality is not possible with?new products such as X-fi?and?they don't even have any?old external soundcards that would do what I want either.
There are a lot of posts on the?board with customers who have been let down in this way. If you had a product to enable continued use of the 5700s I would have purchased it, but you don't, and I'm not?splashing out on top of the line analog speakers.
so no sale...customer gone.

Connecting X-Fi Titanium PCIe to Inspire 5700 speakers - digital connection

I am considering purchasing an X-Fi Titanium PCIe card (or possibly, the X-Fi Titanium Fatalty Pro), and want to connect this to my existing speakers: Creative Inspire 5700 (5.).
The speakers currently connect to my Audigy 2 card via a single 3.5mm connector into the Digital Out socket on the sound card. Looking at the specifications of the X-Fi cards, I don't think they have such 3.5mm digital sockets. Can anyone confirm this, and tell me if/how I can connect my speakers?
Thanks,
Gary

OThanks, Juzam.
If I do this, will I still get true 5. surround sound? Will there be any difference between the way the speakers perform between using the optical connection and the 3.5mm digital one (via DIN)?
Thanks,
Gary

Replacement for Inspire 5700 + Creative Audigy Platinum

Hi,
for many years I have been using a combination of a Creative Audigy Platinum soundcard with a Creative Inspire 5.1 Digital 5700 speaker system. I am very pleased with the quality, compatibility and easy-to-useness of this system. For games and music, I let the soundcard do the decoding and send the bits via digital connection to the Inspire system, which I set to 5.1 DIN. For DVDs, I send everything via SPDIF and let the Inspire do the decoding, either DTS or Dolby digital. Works just perfectly.
Only problem: if everything works according to the plan, I will move from Europe to the States in two months and stay there for - 3 years. Because desktop computers and probably also my Inspire 5700 system are quite tricky to ship, I decided to buy a laptop here and buy another speaker system by creative after I have a arrived in the states. Full of anticipation I checked this site to choose my future system and ... was struck by shock:
I couldn't find any system which offered the same features as the Digital 5700! All modern systems lack digital input, leave alone an external decoder and have primitive wire-remotes instead of real remotes! Why has this kind of great system disappeared? Of course you cannot buy the good old 5700 anymore, which leaves me with a great problem of how to organize a system which offers similar quality and features.
I originally planned to connect my laptop (ASUS A8JS) via S/PDIF to the new inspire 5.1 speaker set, which would then do the job of decoding digital audiostreams coming from DVDs. But well, since the new Inspire sets neither support S/PDIF nor offer external decoding, that idea has been flushed down the toilet
What do you recommend instead? I guess I will need a USB Sound Blaster in combo with an inspire speaker set. What will provide the same quality to what I had? What are the drawbacks of not having digital connections any more? How can I control sound levels of the subwoofer, center and rearspeakers, if there is no external decoder anymore? Only via software?
Thank you very much for any advice!
- spitfire

Thank you very much for your helpful replies! Future looks much brighter now
Where have you found the Audigy 2 NX? On their webpage, creative only list the USB Sound Blaster Audigy 2 ZS Video Editor or the Sound Blaster Live! 24-bit External as USB-solutions. Since I don't need the video editing capability, the Audigy 2 ZS would probably be quite an overkill. Still, the price difference between Audigy ($250) and Life! ($50) is ... drastic! Besides the video stuff and some connections, what else is the Life! solution missing? Does it have poor quality? Is there no real 3D sound, just some kind of upmixing? It's not very clear from the specifications.
The Logitech Z-5500 Digital looks very promising, too. A consequent improvement of the Inspire D-5700, just by the competition I may go for that one, but probably still need an external soundcard for 3D-sound in games.
I am not exactly an expert considering connections. So, my laptop will already have digital S/PDIF built into the headphone plug. Just from the look, I'd say this is the same kind of plug which is called "Analog/Digital-Out" on my old Audigy sound card. Now, the logitech system supports digital optical or digital coaxial as source input. Will this work with the S/PDIF headphone out, or would it require the DIN connection you mentionned? Could this be easily solved by buying an adaptor?
Looking at the picture showing the connections of the SB Life! I again am not clear at all what kind of connections there are (http://us.creative.com/products/prod...Specifications ). Is there anything compatible with the Logitech system? I guess it's no question the Audigy2 ZS is equipped with the required connections.
So, to summarize my question: could I digitally connect either my laptop or the SB Live! 24-bit external with the Logitech Z-5500, so that the latter would take care of decoding Dolby Digital and DTS sound, while the sound blaster would provide EAX and 3D sound for games?
I have also seen that Creative Labs still offers an external decoder with a lot of connection possibilities. It's just no longer part of a speaker system, but rather a standalone product: the Creative Decoder DDTS-100 for $30. Together with a good speaker system, this may be an alternative to the logitech solution, in terms of enabling to plug in other devices than just a computer (another thing I really loved about my old system).
Well, again thank you very much for your advice!
- spitfire

Creative Inspire 5.1 Digital 5700

I want to buy the inspire 5700 but it is off the buy list. I li've in holland. I was watching it because it was not in stock. But after a while it was gone of the list. wenn is it getting back so i can buy it's

kk.. ill buy the decoder DDTS-100 and with 5.1 sound. what would you suggest?
Creative Inspire T5900
Het Creative Inspire P580
De Creative Inspire P5800
De SBS560-
with the decoder:
Creative Decoder DDTS-100
or buy the complete: Het Creative Inspire GD580
its for my dvd player and tv.
another question:
jermey can you give me a link of DTT-100 with the Inspire T-5400 speakers. i cant find them. i live in holland maby its that...
and another question:
i have another question my dvd players supports dolby digital. and now i want to buy one with dolbey digital EX does that work to and another question:
my dvd players supports 5.1 sound if i buy 7.1 sound with a decoder do i get 7.1 sound?
srry i aks so many questions i want to make sure i buy the best:smileyvery-happy:
Message Edited by hanspeter on 03-15-2005 03:19 PM

Creative Inspire 5.1 5700 + X-Fi Plati

Dear Sirs,
I have one problem with my acoustics system and new sound card:
A little prehistory:
. I had sound card (and i still have it, only it's lie on the shelf ) Creative Life 5.
2. I used and still use acoustic system: Creative Inspire 5. Digital 5700
3. Acoustic has connected corrected and worked without problems with Life 5.
I have bought new sound card Creative X-Fi Platinum, tested it with music seems that all works fine, i like it, really exciting things, better sound them was and so on..
But when i started to test 5. with tests and games in Games Mode and so on, it does not work, because seems that all channels works in one, so when i was testing it and voice tell in left front channel it's sounds in other channels as well.
Acoustic was connect by digital and coaxial.
Maybe someone can help me please, maybe i should turn on something in the drivers?
My Computer: Abit Nforce4 KN9 Ultra, AMD Athlon AM2 3000+, Radeon x600Pro 256Mb, 024Mb RAM.
Thanks a lot!
Best regards,
Artem Savotin

Hello!
Thanks a lot for the answer. Now i improved my knowledge, because i already was in despair.
. I have connected my acoustic system and sound card via Analog cable and works only 4 channels: Front L/R and Rear L/R, without Front Center and Sub - as i understood it's correct, right?
2. When i tried to install this driver my system just buzzed and needed to Reboot computer, maybe driver does not compatible with my system.
3. Why does Creative not support Digital/SPDIF for acoustic system like my SPDIF or Digital I/O has better quality of sound then Analog, is not it's
Thanks in advance!
Greeting,
Artem

Creative Digital 5700 Inspire 5.1

For years, I used speakers with my desktop that had a Creative Audigy2 Soundcard, via the Digital DIN connection.
Recently I switched to a laptop. Laptop has a 3.5 mm SPDIF output. I connected the SPDIF output to a 3.5mm male-to-RCA female adapter, then an RCA-to-RCA cable to the coaxial input of the Digital 5700.
However, I don't get any sound from the speakers.
any idea? is my setup wrong? how can i get any sound from the laptop to the speakers?thanks in advance.

Please check your speaker manuals first if you still have them. I don't think you will be able to feed your speaker with digital connection from your notebook. This is the reason :
1. Your notebook have a standard SPDIF connection, it's a industrial standard which work with every standard A/V receiver or decoder.
2. Your speaker (Creative Digital 5700 Inspire 5.1) have a DIGITAL DIN in, not a standard DIGITAL SPDIF in. DIGITAL DIN is a propietary connection, so it only works Creative sound card that have DIGITAL DIN out (your audigy 2 for example). Creative is notorious with it's DIGITAL DIN which only works between their own sound cards and speakers. (be careful, audigy2 nx and X-Fi have a standard DIGITAL SPDIF, unlike the rest of their comrades)
There is no way you can make the speaker work with your notebook, except you know how to hard mod it.
Creative team, please correct me if i am wrong.

Connecting Creative Inspire 5.1 speakers to DVD player

Hi,
I have a LG DVD Player (DSI 8352) which gives 5.1 home theatre (dolby decoder) output.
If I buy Creative Inspire 5.1 speakers (5200 or 5700), how do I connect them ? Through RCA Stereo cables ? Would there be any compatibility issues ?
Please suggest the 5.1 speakers that would suit my requirement (no decoder / only amplifier) ..
Plz reply back to [email protected]
Thanks,Sambath

Creative offers many speaker systems that will fit your needs, without decoder.
You mentioned the Inspire 5700 system; this system comes with a decoder/amplifier, and wouldnt actually be what you'r looking for.
If your looking for awesome sound-quality, and good power, I can recommend the 5.1 Megaworks system, though this system can get quite expensive, you'll get what you pay for.
The megaworks (like "all" other creative speaker systems, got a built in amplifier in the subwoofer, where you connect all the speakers.)
To connect the speakers to the DVD-player, you connect the multichannel output on the DVD-player, to the multichannel input on the back of the subwoofer. (three stereo minijack inputs.)
You may need some RCA-to-minijack adapters, so that the multichannel audio cable that comes with the megaworks, will fit on your DVD-players output.

Converting analog 5.1 (multiple cables) to Digital DIN (for Inspire 5700), how?

Hi,
So far I've been using my Inspire 5.1 Digital 5700 speaker system together with my Audigy Platinum in my Desktop PC to watch DVDs and play games with a 5.1 experience. To connect soundcard and Speaker system, I used the provided Digital DIN cable, and it worked fantastically, for both, DVDs and games.
Now I bought a notebook and the only choice to improve onboard sound was the X-Fi Xtreme Audio Notebook. I thought that I could simply connect it to my Inspire 5700 by connecting optical out with optical in using a TosLink-Mini -> Toslink cable. While this may work for DVDs (I don't have the cable yet), it won't work for all other applications, because as I read optical connections only provide a stereo signal unless the signal it'ss encoded via AC3 or DTS.
Of course there is the docking module which provides multichannel analog out. Trouble here: the Inspire 5700 only comes with two analog line in channels, front and rear. So that would lead to 4.0 instead of 5.1. Missing the center speaker for games is very bad.
Therefore I am looking for a way to convert the analog signal coming from the docking module into something that can be decoded as a 5.1 signal by the Inspire 5700. I have already found the DTS-610 which would turn the analog signal into a DTS signal. But that costs more than the soundcard itself.
So, my question: Is there any simpler / cheaper way how to transform multicable analog 5.1 to one-cable digital 5.1, either AC3, DTS or Digital DIN? I'd prefer a simple converter to Digital DIN, because that's what the Inspire 5700 was mainly designed for and it worked perfectly with my old Audigy.
Alternatively, one could possibly also use some fancy software to convert all the wave-out sound into AC3 or DTS and send it along the optical cable. But I don?t know any such software plus I expect this to drain a lot of processor power.
Any help is greatly appreciated it'ss kind of frustrating that two products of the same company can't be connected with each other, just because neither, the card nor the docking module provide Digital DIN.
Thank you very much and best regards
- spitfire
P.S. in another post, pjc said: You will probably require a 4-pole mini-jack > DIN converter to connect your Creative speakers to this socket.
That's exactly what I'm looking for, but I couldn't find such a converter on the creative homepage.

I believe the DIN for soundcard are mainly built and solely used by Creative. I don't think there is any 3rd-party converter in the market to do DIN. There is a software here posted by some other users that can do AC3 encoding on the fly. Not too sure where's the post now but you can do a search for it.

Digital DIN cable !!! inspire 5700+audigy 2ZS

Hi,
i need help with my inspire 5700. i don't have a digital din cable (for digital connecting audigy + inspire). Support says that cable is not available. does anybody know where to get this cable (4pole digital jack to 9pole digital DIN) or how to make this cable?
Mic

I believe the DIN for soundcard are mainly built and solely used by Creative. I don't think there is any 3rd-party converter in the market to do DIN. There is a software here posted by some other users that can do AC3 encoding on the fly. Not too sure where's the post now but you can do a search for it.

Optimal configuration for inspire 5700

I juz bought a inspire 5700 and a audigy 2 ZS. Currently i am using the digital connection through the Digital Din input on the decoder from the Digital out of the soundcard. However, when i m playing mp3, only the centre and front speakers are working, the rear speakers are only playing some background music. When i m using the DTT 2200 speakers before this, all my 4 satellites are playing loud and clear. When i try to use analog connection (green and black) on my inspire 5700, no sound is coming out from the speaker. I wonder y. I already disable the digital out from the speaker setting. Is anyone using this speaker and can u advice me on how to configure the speakers and soundcard to achieve good quality sound? Thanx alot.

otarboy wrote:Ok i have tried setting the CMSS to stereo surround. However, i dun feel much difference from the CMSS2 or CMSS setting. The rear speakers are producing muffled sounds of the songs unlike the front speakers which are very clear in the singing. Also i tried to play mp3 songs using analog connection and the result is almost like digital output. When i was using the DTT 2200, all four speakers sounded equally clear since they are analog output but how come the analog output of Inspire 5700 is so different? I have already turn up the surround volume till 3/4 max and yet i cant feel the surround of music. So if i dun watch dvd on my pc, does that mean the Inspire 5700 is performing worse than my old DTT 2200?
Hey budd I use my CMSS3D settings too but I leave them set on stero surround and use InterVideo WinDVD6 Platinum Edition ver.B06.083 and don't use Creative Mediasource DVD-Audio Player ver..50.08 cause with that version sounds like there is static on the cd and complicating playback on the cd but thats a bug in creative software but to my knowlage anything in there previous ver. works well off but with InterVideo WinDVD6 PE software of mine they give me settings with it called audio booster pack and I can give my back speakers a Boost of +25 and I can hear well off then with that and does wanders on my DVD'S as well with DVD audio.
PowerDVD I don't like because of conflicts with creative drivers but I don't care for that cause InterVideo software is much better IMO
P.S. you don't have to worry about changing the settings in CMSS3D after you set it to stereo surround because DVD software has no affects with that CMSS3D or atleast to my ears they don't but you could have super sonic ears too hehe... but the settings do take affect in reguler Windows Media Player and Creative Mediasource and other media players out there
Also for your digital audio yes it must be recorded in 3D audio or it will not work right and with analog it would just upmix it unless you want to try on your digital to upmix it by the remote on the speaker settings of yours hardware wise and see if that don't help?
but also digital helps RIAA out in copyright protection of course there are ways around that too but I am not pramoting anything illegal so I will leave that subject alone for you all thinkers out there
after listening to the included dvd-audio disk that comes with Creative Soundblaster audigy2 zs gamer LE card through InterVideo WinDVD6 Platinum ED you can tell a kickass diffrence I mean it's the type that gives ya goosebumps cause you love hearing waht you hear coming from your speakers hehe..... at least try the demo and if ya love the demo get with me at [email protected] and I may share ya a full retail version for just being a helpfull person that I am
Good Luck both ways buddy give it a try you will love it
Message Edited by RLemmon on 12-30-2004 07:59 AM

I Need an Inspire 5700 decoder

My decoder went bad and I'm looking to replace it with the Inspire 5700 decoder box. Anyone know where I can buy one? Thanks for the help...

Yeh man thats really disapointing to hear I was looking around but no one that I can see has this unit itself for sale but I would contact creative by e-mail and see if they have any in stock for a replacement and sorry for any more information you may have wanted but thats all I could come up with I mean I even tryed ebay and no one has any for sale there ither?
Good Luck though

Creative inspire 5700

Similar Messages

Maybe you are looking for